From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from out20-61.mail.aliyun.com ([115.124.20.61]:58604 "EHLO out20-61.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751113AbdG0FDg (ORCPT ); Thu, 27 Jul 2017 01:03:36 -0400 From: Yong Deng To: maxime.ripard@free-electrons.com Cc: Mauro Carvalho Chehab , Rob Herring , Mark Rutland , Chen-Yu Tsai , Greg Kroah-Hartman , "David S. Miller" , Hans Verkuil , Arnd Bergmann , Hugues Fruchet , Yannick Fertre , Philipp Zabel , Benoit Parrot , Benjamin Gaignard , Jean-Christophe Trotin , Ramesh Shanmugasundaram , Minghsiu Tsai , Krzysztof Kozlowski , Robert Jarzmik , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Yong Deng Subject: [PATCH v2 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI) Date: Thu, 27 Jul 2017 13:01:36 +0800 Message-Id: <1501131697-1359-3-git-send-email-yong.deng@magewell.com> In-Reply-To: <1501131697-1359-1-git-send-email-yong.deng@magewell.com> References: <1501131697-1359-1-git-send-email-yong.deng@magewell.com> Sender: linux-media-owner@vger.kernel.org List-ID: Add binding documentation for Allwinner V3s CSI. Signed-off-by: Yong Deng --- .../devicetree/bindings/media/sun6i-csi.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt new file mode 100644 index 0000000..f8d83f6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -0,0 +1,49 @@ +Allwinner V3s Camera Sensor Interface +------------------------------ + +Required properties: + - compatible: value must be "allwinner,sun8i-v3s-csi" + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the CSI + * ahb: the CSI interface clock + * mod: the CSI module clock + * ram: the CSI DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the CSI + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + csi1: csi@01cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + data-shift = <0>; + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + -- 1.8.3.1