From: Todor Tomov <todor.tomov@linaro.org>
To: mchehab@kernel.org, hans.verkuil@cisco.com,
s.nawrocki@samsung.com, sakari.ailus@iki.fi,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Cc: Todor Tomov <todor.tomov@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH v4 02/21] dt-bindings: media: Binding document for Qualcomm Camera subsystem driver
Date: Tue, 8 Aug 2017 16:29:59 +0300 [thread overview]
Message-ID: <1502199018-28250-3-git-send-email-todor.tomov@linaro.org> (raw)
In-Reply-To: <1502199018-28250-1-git-send-email-todor.tomov@linaro.org>
Add DT binding document for Qualcomm Camera subsystem driver.
CC: Rob Herring <robh+dt@kernel.org>
CC: devicetree@vger.kernel.org
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/media/qcom,camss.txt | 197 +++++++++++++++++++++
1 file changed, 197 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt
diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
new file mode 100644
index 0000000..cadeceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
@@ -0,0 +1,197 @@
+Qualcomm Camera Subsystem
+
+* Properties
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain:
+ - "qcom,msm8916-camss"
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property.
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "csiphy0"
+ - "csiphy0_clk_mux"
+ - "csiphy1"
+ - "csiphy1_clk_mux"
+ - "csid0"
+ - "csid1"
+ - "ispif"
+ - "csi_clk_mux"
+ - "vfe0"
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Interrupts as listed in the interrupt-names property.
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "csiphy0"
+ - "csiphy1"
+ - "csid0"
+ - "csid1"
+ - "ispif"
+ - "vfe0"
+- power-domains:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A phandle and power domain specifier pairs to the
+ power domain which is responsible for collapsing
+ and restoring power to the peripheral.
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and clock specifier pairs as listed
+ in clock-names property.
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "camss_top_ahb"
+ - "ispif_ahb"
+ - "csiphy0_timer"
+ - "csiphy1_timer"
+ - "csi0_ahb"
+ - "csi0"
+ - "csi0_phy"
+ - "csi0_pix"
+ - "csi0_rdi"
+ - "csi1_ahb"
+ - "csi1"
+ - "csi1_phy"
+ - "csi1_pix"
+ - "csi1_rdi"
+ - "camss_ahb"
+ - "camss_vfe_vfe"
+ - "camss_csi_vfe"
+ - "iface"
+ - "bus"
+- vdda-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: A phandle to voltage supply for CSI2.
+- iommus:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+
+* Nodes
+
+- ports:
+ Usage: required
+ Definition: As described in video-interfaces.txt in same directory.
+ Properties:
+ - reg:
+ Usage: required
+ Value type: <u32>
+ Definition: Selects CSI2 PHY interface - PHY0 or PHY1.
+ Endpoint node properties:
+ - clock-lanes:
+ Usage: required
+ Value type: <u32>
+ Definition: The physical clock lane index. The value
+ must always be <1> as the physical clock
+ lane is lane 1.
+ - data-lanes:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported.
+
+* An Example
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x1b0ac00 0x200>,
+ <0x1b00030 0x4>,
+ <0x1b0b000 0x200>,
+ <0x1b00038 0x4>,
+ <0x1b08000 0x100>,
+ <0x1b08400 0x100>,
+ <0x1b0a000 0x500>,
+ <0x1b00020 0x10>,
+ <0x1b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 51 0>,
+ <GIC_SPI 52 0>,
+ <GIC_SPI 55 0>,
+ <GIC_SPI 57 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "camss_top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "camss_ahb",
+ "camss_vfe_vfe",
+ "camss_csi_vfe",
+ "iface",
+ "bus";
+ vdda-supply = <&pm8916_l2>;
+ iommus = <&apps_iommu 3>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ csiphy0_ep: endpoint {
+ clock-lanes = <1>;
+ data-lanes = <0 2>;
+ remote-endpoint = <&ov5645_ep>;
+ };
+ };
+ };
+ };
--
2.7.4
next prev parent reply other threads:[~2017-08-08 13:30 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-08 13:29 [PATCH v4 00/21] Qualcomm 8x16 Camera Subsystem driver Todor Tomov
2017-08-08 13:29 ` [PATCH v4 01/21] v4l: Add packed Bayer raw12 pixel formats Todor Tomov
2017-08-08 13:29 ` Todor Tomov [this message]
2017-08-08 13:30 ` [PATCH v4 03/21] MAINTAINERS: Add Qualcomm Camera subsystem driver Todor Tomov
2017-08-08 13:30 ` [PATCH v4 04/21] doc: media/v4l-drivers: Add Qualcomm Camera Subsystem driver document Todor Tomov
2017-08-18 7:45 ` Hans Verkuil
2017-08-18 7:53 ` Todor Tomov
2017-08-25 14:10 ` Daniel Mack
2017-08-28 7:10 ` Todor Tomov
2017-08-29 17:02 ` Daniel Mack
2017-10-16 15:01 ` Daniel Mack
2017-10-25 12:07 ` Todor Tomov
2017-10-25 12:18 ` Daniel Mack
2017-08-08 13:30 ` [PATCH v4 05/21] media: camss: Add CSIPHY files Todor Tomov
2017-08-08 13:30 ` [PATCH v4 06/21] media: camss: Add CSID files Todor Tomov
2017-08-08 13:30 ` [PATCH v4 07/21] media: camss: Add ISPIF files Todor Tomov
2017-08-08 13:30 ` [PATCH v4 08/21] media: camss: Add VFE files Todor Tomov
2017-08-08 13:30 ` [PATCH v4 09/21] media: camss: Add files which handle the video device nodes Todor Tomov
2017-08-08 14:44 ` Sakari Ailus
2017-08-08 13:30 ` [PATCH v4 10/21] media: camms: Add core files Todor Tomov
2017-08-08 13:30 ` [PATCH v4 11/21] media: camss: Enable building Todor Tomov
2017-08-08 13:30 ` [PATCH v4 12/21] camss: vfe: Format conversion support using PIX interface Todor Tomov
2017-09-10 9:58 ` Geert Uytterhoeven
2017-09-11 6:56 ` Todor Tomov
2017-09-11 7:45 ` Geert Uytterhoeven
2017-08-08 13:30 ` [PATCH v4 13/21] doc: media/v4l-drivers: Qualcomm Camera Subsystem - PIX Interface Todor Tomov
2017-08-08 13:30 ` [PATCH v4 14/21] camss: vfe: Support for frame padding Todor Tomov
2017-08-08 13:30 ` [PATCH v4 15/21] camss: vfe: Add interface for scaling Todor Tomov
2017-08-08 13:30 ` [PATCH v4 16/21] camss: vfe: Configure scaler module in VFE Todor Tomov
2017-08-08 13:30 ` [PATCH v4 17/21] camss: vfe: Add interface for cropping Todor Tomov
2017-08-08 13:30 ` [PATCH v4 18/21] camss: vfe: Configure crop module in VFE Todor Tomov
2017-08-08 13:30 ` [PATCH v4 19/21] doc: media/v4l-drivers: Qualcomm Camera Subsystem - Scale and crop Todor Tomov
2017-08-08 13:30 ` [PATCH v4 20/21] camss: Use optimal clock frequency rates Todor Tomov
2017-08-08 13:30 ` [PATCH v4 21/21] doc: media/v4l-drivers: Qualcomm Camera Subsystem - Media graph Todor Tomov
2017-08-08 14:53 ` [PATCH v4 00/21] Qualcomm 8x16 Camera Subsystem driver Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502199018-28250-3-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).