From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com, magnus.damm@gmail.com,
geert@glider.be, mchehab@kernel.org, hverkuil@xs4all.nl
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
Date: Wed, 15 Nov 2017 11:55:58 +0100 [thread overview]
Message-ID: <1510743363-25798-6-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1510743363-25798-1-git-send-email-jacopo+renesas@jmondi.org>
Migo-R platform uses sh_mobile_ceu camera driver, which is now being
replaced by a proper V4L2 camera driver named 'renesas-ceu'.
Move Migo-R platform to use the v4l2 renesas-ceu camera driver
interface and get rid of soc_camera defined components used to register
sensor drivers.
Also, memory for CEU video buffers is now reserved with membocks APIs,
and need to be declared as dma_coherent during machine initialization to
remove that architecture specific part from CEU driver.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/sh/boards/mach-migor/setup.c | 164 ++++++++++++++++++--------------------
1 file changed, 76 insertions(+), 88 deletions(-)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 98aa094..10a9b3c 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -27,7 +27,7 @@
#include <linux/videodev2.h>
#include <linux/sh_intc.h>
#include <video/sh_mobile_lcdc.h>
-#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/drv-intf/renesas-ceu.h>
#include <media/i2c/ov772x.h>
#include <media/soc_camera.h>
#include <media/i2c/tw9910.h>
@@ -308,62 +308,80 @@ static struct platform_device migor_lcdc_device = {
static struct clk *camera_clk;
static DEFINE_MUTEX(camera_lock);
-static void camera_power_on(int is_tw)
+static void camera_vio_clk_on(void)
{
- mutex_lock(&camera_lock);
-
/* Use 10 MHz VIO_CKO instead of 24 MHz to work
* around signal quality issues on Panel Board V2.1.
*/
camera_clk = clk_get(NULL, "video_clk");
clk_set_rate(camera_clk, 10000000);
clk_enable(camera_clk); /* start VIO_CKO */
-
- /* use VIO_RST to take camera out of reset */
- mdelay(10);
- if (is_tw) {
- gpio_set_value(GPIO_PTT2, 0);
- gpio_set_value(GPIO_PTT0, 0);
- } else {
- gpio_set_value(GPIO_PTT0, 1);
- }
- gpio_set_value(GPIO_PTT3, 0);
- mdelay(10);
- gpio_set_value(GPIO_PTT3, 1);
- mdelay(10); /* wait to let chip come out of reset */
}
-static void camera_power_off(void)
+static void camera_disable(void)
{
- clk_disable(camera_clk); /* stop VIO_CKO */
+ /* stop VIO_CKO */
+ clk_disable(camera_clk);
clk_put(camera_clk);
+ gpio_set_value(GPIO_PTT0, 0);
+ gpio_set_value(GPIO_PTT2, 1);
gpio_set_value(GPIO_PTT3, 0);
+
mutex_unlock(&camera_lock);
}
-static int ov7725_power(struct device *dev, int mode)
+static void camera_reset(void)
{
- if (mode)
- camera_power_on(0);
- else
- camera_power_off();
+ /* use VIO_RST to take camera out of reset */
+ gpio_set_value(GPIO_PTT3, 0);
+ mdelay(10);
+ gpio_set_value(GPIO_PTT3, 1);
+ mdelay(10);
+}
+
+static int ov7725_enable(void)
+{
+ mutex_lock(&camera_lock);
+ camera_vio_clk_on();
+ mdelay(10);
+ gpio_set_value(GPIO_PTT0, 1);
+
+ camera_reset();
return 0;
}
-static int tw9910_power(struct device *dev, int mode)
+static int tw9910_enable(void)
{
- if (mode)
- camera_power_on(1);
- else
- camera_power_off();
+ mutex_lock(&camera_lock);
+ camera_vio_clk_on();
+ mdelay(10);
+ gpio_set_value(GPIO_PTT2, 0);
+
+ camera_reset();
return 0;
}
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
- .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+static struct ceu_info ceu_info = {
+ .num_subdevs = 2,
+ .subdevs = {
+ { /* [0] = ov772x */
+ .flags = CEU_FLAG_PRIMARY_SENS,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x21,
+ },
+ { /* [1] = tw9910 */
+ .flags = 0,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x45,
+ },
+ },
};
static struct resource migor_ceu_resources[] = {
@@ -377,18 +395,15 @@ static struct resource migor_ceu_resources[] = {
.start = evt2irq(0x880),
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* place holder for contiguous memory */
- },
};
static struct platform_device migor_ceu_device = {
- .name = "sh_mobile_ceu",
+ .name = "renesas-ceu",
.id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(migor_ceu_resources),
.resource = migor_ceu_resources,
.dev = {
- .platform_data = &sh_mobile_ceu_info,
+ .platform_data = &ceu_info,
},
};
@@ -427,6 +442,19 @@ static struct platform_device sdhi_cn9_device = {
},
};
+static struct ov772x_camera_info ov7725_info = {
+ .platform_enable = ov7725_enable,
+ .platform_disable = camera_disable,
+};
+
+static struct tw9910_video_info tw9910_info = {
+ .buswidth = TW9910_DATAWIDTH_8,
+ .mpout = TW9910_MPO_FIELD,
+
+ .platform_enable = tw9910_enable,
+ .platform_disable = camera_disable,
+};
+
static struct i2c_board_info migor_i2c_devices[] = {
{
I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -438,51 +466,13 @@ static struct i2c_board_info migor_i2c_devices[] = {
{
I2C_BOARD_INFO("wm8978", 0x1a),
},
-};
-
-static struct i2c_board_info migor_i2c_camera[] = {
{
I2C_BOARD_INFO("ov772x", 0x21),
+ .platform_data = &ov7725_info,
},
{
I2C_BOARD_INFO("tw9910", 0x45),
- },
-};
-
-static struct ov772x_camera_info ov7725_info;
-
-static struct soc_camera_link ov7725_link = {
- .power = ov7725_power,
- .board_info = &migor_i2c_camera[0],
- .i2c_adapter_id = 0,
- .priv = &ov7725_info,
-};
-
-static struct tw9910_video_info tw9910_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct soc_camera_link tw9910_link = {
- .power = tw9910_power,
- .board_info = &migor_i2c_camera[1],
- .i2c_adapter_id = 0,
- .priv = &tw9910_info,
-};
-
-static struct platform_device migor_camera[] = {
- {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &ov7725_link,
- },
- }, {
- .name = "soc-camera-pdrv",
- .id = 1,
- .dev = {
- .platform_data = &tw9910_link,
- },
+ .platform_data = &tw9910_info,
},
};
@@ -490,12 +480,9 @@ static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
&migor_lcdc_device,
- &migor_ceu_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
&sdhi_cn9_device,
- &migor_camera[0],
- &migor_camera[1],
};
extern char migor_sdram_enter_start;
@@ -505,8 +492,6 @@ extern char migor_sdram_leave_end;
static int __init migor_devices_setup(void)
{
- struct resource *r;
-
/* register board specific self-refresh code */
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
&migor_sdram_enter_start,
@@ -651,16 +636,19 @@ static int __init migor_devices_setup(void)
*/
__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
- /* Setup additional memory resource for CEU video buffers */
- r = &migor_ceu_device.resource[2];
- r->flags = IORESOURCE_MEM;
- r->start = ceu_dma_membase;
- r->end = r->start + CEU_BUFFER_MEMORY_SIZE - 1;
- r->name = "ceu";
-
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
+ /* Initialize CEU platform device separately to map memory first */
+ device_initialize(&migor_ceu_device.dev);
+ arch_setup_pdev_archdata(&migor_ceu_device);
+ dma_declare_coherent_memory(&migor_ceu_device.dev,
+ ceu_dma_membase, ceu_dma_membase,
+ ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
+ DMA_MEMORY_EXCLUSIVE);
+
+ platform_device_add(&migor_ceu_device);
+
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
arch_initcall(migor_devices_setup);
--
2.7.4
next prev parent reply other threads:[~2017-11-15 11:15 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-15 10:55 [PATCH v1 00/10] Renesas Capture Engine Unit (CEU) V4L2 driver Jacopo Mondi
2017-11-15 10:55 ` [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings Jacopo Mondi
2017-11-15 11:32 ` Kieran Bingham
2017-11-15 12:33 ` Sakari Ailus
2017-12-11 14:24 ` Laurent Pinchart
2017-11-15 13:07 ` Geert Uytterhoeven
2017-11-15 18:15 ` jacopo mondi
2017-11-15 18:39 ` Geert Uytterhoeven
2017-11-15 10:55 ` [PATCH v1 02/10] include: media: Add Renesas CEU driver interface Jacopo Mondi
2017-11-15 12:36 ` Sakari Ailus
2017-12-11 14:26 ` Laurent Pinchart
2017-12-11 14:32 ` Laurent Pinchart
2017-11-15 10:55 ` [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver Jacopo Mondi
2017-11-15 12:45 ` Sakari Ailus
2017-11-15 14:25 ` jacopo mondi
2017-11-17 0:36 ` Sakari Ailus
2017-11-17 9:33 ` jacopo mondi
2017-11-25 15:56 ` Sakari Ailus
2017-11-25 18:17 ` jacopo mondi
2017-12-11 15:04 ` Laurent Pinchart
2017-12-11 16:15 ` Laurent Pinchart
2017-12-18 12:25 ` jacopo mondi
2017-12-18 15:28 ` Laurent Pinchart
2017-12-21 16:27 ` jacopo mondi
2017-12-22 12:03 ` Laurent Pinchart
2017-12-22 14:40 ` jacopo mondi
2017-12-23 11:39 ` Laurent Pinchart
2017-12-19 11:57 ` jacopo mondi
2017-12-19 13:07 ` Laurent Pinchart
2017-12-19 13:28 ` Sakari Ailus
2017-12-19 13:52 ` Laurent Pinchart
2017-12-13 12:03 ` Hans Verkuil
2017-12-18 14:12 ` jacopo mondi
2017-11-15 10:55 ` [PATCH v1 04/10] ARM: dts: r7s72100: Add Capture Engine Unit (CEU) Jacopo Mondi
2017-11-17 14:22 ` Simon Horman
2017-11-23 9:41 ` Geert Uytterhoeven
2017-11-15 10:55 ` Jacopo Mondi [this message]
2017-12-11 14:36 ` [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver Laurent Pinchart
2017-12-12 10:00 ` Laurent Pinchart
2017-11-15 10:55 ` [PATCH v1 06/10] sh: sh7722: Rename CEU clock Jacopo Mondi
2017-11-15 13:13 ` Geert Uytterhoeven
2017-11-17 9:15 ` jacopo mondi
2017-11-15 10:56 ` [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver Jacopo Mondi
2017-12-11 14:49 ` Laurent Pinchart
2017-12-13 12:10 ` Hans Verkuil
2017-12-13 13:02 ` Philippe Ombredanne
2017-11-15 10:56 ` [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies Jacopo Mondi
2017-11-17 0:43 ` Sakari Ailus
2017-11-17 9:14 ` jacopo mondi
2017-11-25 16:04 ` Sakari Ailus
2017-12-11 14:47 ` Laurent Pinchart
2017-11-15 10:56 ` [PATCH v1 09/10] v4l: i2c: Copy tw9910 soc_camera sensor driver Jacopo Mondi
2017-12-11 14:50 ` Laurent Pinchart
2017-11-15 10:56 ` [PATCH v1 10/10] media: i2c: tw9910: Remove soc_camera dependencies Jacopo Mondi
2017-12-11 14:55 ` Laurent Pinchart
2017-12-13 12:13 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510743363-25798-6-git-send-email-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=geert@glider.be \
--cc=hverkuil@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).