From: Brad Love <brad@nextdimension.cc>
To: linux-media@vger.kernel.org
Cc: Brad Love <brad@nextdimension.cc>
Subject: [PATCH v2 09/12] cx23885: Add i2c device analog tuner support
Date: Wed, 27 Feb 2019 12:27:43 -0600 [thread overview]
Message-ID: <1551292066-29574-10-git-send-email-brad@nextdimension.cc> (raw)
In-Reply-To: <1551292066-29574-1-git-send-email-brad@nextdimension.cc>
Hauppauge QuadHD boards all use i2c device drivers and have
tuner_type equal TUNER_ABSENT. This means additional support
is required to enable the analog tuning capability, a case
statement is used to identify these models.
Models with analog tuner inputs enabled:
- CX23885_BOARD_HAUPPAUGE_HVR1265_K4 (tested)
- CX23885_BOARD_HAUPPAUGE_QUADHD_DVB (tested)
- CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC (tested)
Signed-off-by: Brad Love <brad@nextdimension.cc>
---
No changes
drivers/media/pci/cx23885/cx23885-video.c | 60 +++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 10 deletions(-)
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index ed4ca1e..6d6e7fb 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -646,8 +646,17 @@ static int vidioc_querycap(struct file *file, void *priv,
sizeof(cap->card));
sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
cap->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_AUDIO;
- if (dev->tuner_type != TUNER_ABSENT)
+ switch (dev->board) { /* i2c device tuners */
+ case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
cap->device_caps |= V4L2_CAP_TUNER;
+ break;
+ default:
+ if (dev->tuner_type != TUNER_ABSENT)
+ cap->device_caps |= V4L2_CAP_TUNER;
+ break;
+ }
if (vdev->vfl_type == VFL_TYPE_VBI)
cap->device_caps |= V4L2_CAP_VBI_CAPTURE;
else
@@ -901,8 +910,16 @@ static int vidioc_g_tuner(struct file *file, void *priv,
{
struct cx23885_dev *dev = video_drvdata(file);
- if (dev->tuner_type == TUNER_ABSENT)
- return -EINVAL;
+ switch (dev->board) { /* i2c device tuners */
+ case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ break;
+ default:
+ if (dev->tuner_type == TUNER_ABSENT)
+ return -EINVAL;
+ break;
+ }
if (0 != t->index)
return -EINVAL;
@@ -917,8 +934,16 @@ static int vidioc_s_tuner(struct file *file, void *priv,
{
struct cx23885_dev *dev = video_drvdata(file);
- if (dev->tuner_type == TUNER_ABSENT)
- return -EINVAL;
+ switch (dev->board) { /* i2c device tuners */
+ case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ break;
+ default:
+ if (dev->tuner_type == TUNER_ABSENT)
+ return -EINVAL;
+ break;
+ }
if (0 != t->index)
return -EINVAL;
/* Update the A/V core */
@@ -932,9 +957,16 @@ static int vidioc_g_frequency(struct file *file, void *priv,
{
struct cx23885_dev *dev = video_drvdata(file);
- if (dev->tuner_type == TUNER_ABSENT)
- return -EINVAL;
-
+ switch (dev->board) { /* i2c device tuners */
+ case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ break;
+ default:
+ if (dev->tuner_type == TUNER_ABSENT)
+ return -EINVAL;
+ break;
+ }
f->type = V4L2_TUNER_ANALOG_TV;
f->frequency = dev->freq;
@@ -948,8 +980,16 @@ static int cx23885_set_freq(struct cx23885_dev *dev, const struct v4l2_frequency
struct v4l2_ctrl *mute;
int old_mute_val = 1;
- if (dev->tuner_type == TUNER_ABSENT)
- return -EINVAL;
+ switch (dev->board) { /* i2c device tuners */
+ case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ break;
+ default:
+ if (dev->tuner_type == TUNER_ABSENT)
+ return -EINVAL;
+ break;
+ }
if (unlikely(f->tuner != 0))
return -EINVAL;
--
2.7.4
next prev parent reply other threads:[~2019-02-27 18:28 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-29 17:51 [PATCH 00/13] si2157: Analog tuning and optimizations Brad Love
2018-12-29 17:51 ` [PATCH 01/13] si2157: Enable tuner status flags Brad Love
2018-12-29 17:51 ` [PATCH 02/13] si2157: Check error status bit on cmd execute Brad Love
2019-01-09 18:01 ` Antti Palosaari
2019-01-15 17:28 ` Brad Love
2018-12-29 17:51 ` [PATCH 03/13] si2157: Better check for running tuner in init Brad Love
2018-12-29 17:51 ` [PATCH 04/13] si2157: Add clock and pin setup for si2141 Brad Love
2019-01-20 17:17 ` Antti Palosaari
2019-01-22 17:10 ` Brad Love
2018-12-29 17:51 ` [PATCH 05/13] cx25840: Register labeling, chip specific correction Brad Love
2018-12-29 17:51 ` [PATCH 06/13] si2157: Add analog tuning related functions Brad Love
2018-12-29 17:51 ` [PATCH 07/13] si2157: Briefly wait for tuning operation to complete Brad Love
2019-04-05 10:29 ` Sean Young
2019-04-08 18:14 ` Brad Love
2019-04-08 20:55 ` Sean Young
2019-04-08 21:37 ` Brad Love
2019-04-10 14:48 ` Brad Love
2018-12-29 17:51 ` [PATCH 08/13] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2018-12-29 17:51 ` [PATCH 09/13] cx23885: Add analog tuner to 1265_K4 Brad Love
2018-12-29 17:51 ` [PATCH 11/13] cx23885: Add i2c device analog tuner support Brad Love
2018-12-29 17:51 ` [PATCH 10/13] cx231xx: " Brad Love
2018-12-29 17:51 ` [PATCH 12/13] si2157: add on-demand rf strength func Brad Love
2019-01-20 19:09 ` Antti Palosaari
2018-12-29 17:51 ` [PATCH 13/13] lgdt3306a: Add CNR v5 stat Brad Love
2019-02-27 18:27 ` [PATCH v2 00/13] si2157: Analog tuning and optimizations Brad Love
2019-02-27 18:27 ` [PATCH v2 01/12] si2157: Enable tuner status flags Brad Love
2019-02-27 18:27 ` [PATCH v2 02/12] si2157: Check error status bit on cmd execute Brad Love
2019-02-27 18:27 ` [PATCH v2 03/12] si2157: Better check for running tuner in init Brad Love
2019-02-27 18:27 ` [PATCH v2 04/12] cx25840: Register labeling, chip specific correction Brad Love
2019-02-27 18:27 ` [PATCH v2 05/12] si2157: Add analog tuning related functions Brad Love
2019-04-05 13:24 ` Sean Young
2019-04-08 18:18 ` Brad Love
2019-02-27 18:27 ` [PATCH v2 06/12] si2157: Briefly wait for tuning operation to complete Brad Love
2019-02-27 18:27 ` [PATCH v2 07/12] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2019-02-27 18:27 ` [PATCH v2 08/12] cx23885: Add analog frontend to 1265_K4 Brad Love
2019-02-27 18:27 ` Brad Love [this message]
2019-02-27 18:27 ` [PATCH v2 10/12] cx231xx: Add i2c device analog tuner support Brad Love
2019-02-27 18:27 ` [PATCH v2 11/12] si2157: add on-demand rf strength func Brad Love
2019-02-27 18:27 ` [PATCH v2 12/12] lgdt3306a: Add CNR v5 stat Brad Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551292066-29574-10-git-send-email-brad@nextdimension.cc \
--to=brad@nextdimension.cc \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).