Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: bingbu.cao@intel.com
To: linux-media@vger.kernel.org
Cc: sakari.ailus@linux.intel.com, tfiga@chromium.org,
	andy.yeh@intel.com, bingbu.cao@linux.intel.com
Subject: [PATCH v2] media: staging: imgu: make imgu work on low frequency for low input
Date: Fri, 16 Aug 2019 18:20:48 +0800
Message-ID: <1565950848-10076-1-git-send-email-bingbu.cao@intel.com> (raw)

From: Bingbu Cao <bingbu.cao@intel.com>

Currently, imgu is working on 450MHz for all cases, however
in some cases (input frame less than 2048x1152), the imgu
did not need work in high frequency.
This patch make imgu work on 200MHz if the imgu input
frame is less than 2048x1152 to save power.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
---
 drivers/staging/media/ipu3/ipu3-css.c |  6 +++---
 drivers/staging/media/ipu3/ipu3-css.h |  3 ++-
 drivers/staging/media/ipu3/ipu3.c     | 16 ++++++++++++++--
 3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/ipu3/ipu3-css.c b/drivers/staging/media/ipu3/ipu3-css.c
index fd1ed84c400c..a0002ccadbfc 100644
--- a/drivers/staging/media/ipu3/ipu3-css.c
+++ b/drivers/staging/media/ipu3/ipu3-css.c
@@ -210,12 +210,12 @@ static int imgu_hw_wait(void __iomem *base, int reg, u32 mask, u32 cmp)
 
 /* Initialize the IPU3 CSS hardware and associated h/w blocks */
 
-int imgu_css_set_powerup(struct device *dev, void __iomem *base)
+int imgu_css_set_powerup(struct device *dev, void __iomem *base,
+			 unsigned int freq)
 {
-	static const unsigned int freq = 450;
 	u32 pm_ctrl, state, val;
 
-	dev_dbg(dev, "%s\n", __func__);
+	dev_dbg(dev, "%s with freq %u\n", __func__, freq);
 	/* Clear the CSS busy signal */
 	readl(base + IMGU_REG_GP_BUSY);
 	writel(0, base + IMGU_REG_GP_BUSY);
diff --git a/drivers/staging/media/ipu3/ipu3-css.h b/drivers/staging/media/ipu3/ipu3-css.h
index 6b8bab27ab1f..6108a068b228 100644
--- a/drivers/staging/media/ipu3/ipu3-css.h
+++ b/drivers/staging/media/ipu3/ipu3-css.h
@@ -187,7 +187,8 @@ bool imgu_css_is_streaming(struct imgu_css *css);
 bool imgu_css_pipe_queue_empty(struct imgu_css *css, unsigned int pipe);
 
 /******************* css hw *******************/
-int imgu_css_set_powerup(struct device *dev, void __iomem *base);
+int imgu_css_set_powerup(struct device *dev, void __iomem *base,
+			 unsigned int freq);
 void imgu_css_set_powerdown(struct device *dev, void __iomem *base);
 int imgu_css_irq_ack(struct imgu_css *css);
 
diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index 06a61f31ca50..4d53aad31483 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -345,8 +345,20 @@ int imgu_queue_buffers(struct imgu_device *imgu, bool initial, unsigned int pipe
 static int imgu_powerup(struct imgu_device *imgu)
 {
 	int r;
+	unsigned int pipe;
+	unsigned int freq = 200;
+	struct v4l2_mbus_framefmt *fmt;
+
+	/* input larger than 2048*1152, ask imgu to work on high freq */
+	for_each_set_bit(pipe, imgu->css.enabled_pipes, IMGU_MAX_PIPE_NUM) {
+		fmt = &imgu->imgu_pipe[pipe].nodes[IMGU_NODE_IN].pad_fmt;
+		dev_dbg(&imgu->pci_dev->dev, "pipe %u input format = %ux%u",
+			pipe, fmt->width, fmt->height);
+		if ((fmt->width * fmt->height) >= (2048 * 1152))
+			freq = 450;
+	}
 
-	r = imgu_css_set_powerup(&imgu->pci_dev->dev, imgu->base);
+	r = imgu_css_set_powerup(&imgu->pci_dev->dev, imgu->base, freq);
 	if (r)
 		return r;
 
@@ -666,7 +678,7 @@ static int imgu_pci_probe(struct pci_dev *pci_dev,
 	atomic_set(&imgu->qbuf_barrier, 0);
 	init_waitqueue_head(&imgu->buf_drain_wq);
 
-	r = imgu_css_set_powerup(&pci_dev->dev, imgu->base);
+	r = imgu_css_set_powerup(&pci_dev->dev, imgu->base, 200);
 	if (r) {
 		dev_err(&pci_dev->dev,
 			"failed to power up CSS (%d)\n", r);
-- 
2.7.4


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 10:20 bingbu.cao [this message]
2019-08-19  5:37 ` Tomasz Figa

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1565950848-10076-1-git-send-email-bingbu.cao@intel.com \
    --to=bingbu.cao@intel.com \
    --cc=andy.yeh@intel.com \
    --cc=bingbu.cao@linux.intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org linux-media@archiver.kernel.org
	public-inbox-index linux-media


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/ public-inbox