From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.2 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,UNPARSEABLE_RELAY, URIBL_BLOCKED,USER_AGENT_SANE_2 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 96906C3A59B for ; Sat, 17 Aug 2019 05:36:10 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 55CFE2184D for ; Sat, 17 Aug 2019 05:36:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726080AbfHQFgJ (ORCPT ); Sat, 17 Aug 2019 01:36:09 -0400 Received: from mailgw02.mediatek.com ([1.203.163.81]:63867 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1725784AbfHQFgJ (ORCPT ); Sat, 17 Aug 2019 01:36:09 -0400 X-UUID: 20f4fdb5627043dd8af2d5769854d936-20190817 X-UUID: 20f4fdb5627043dd8af2d5769854d936-20190817 Received: from mtkcas36.mediatek.inc [(172.27.4.253)] by mailgw02.mediatek.com (envelope-from ) (mailgw01.mediatek.com ESMTP with TLS) with ESMTP id 1895496187; Sat, 17 Aug 2019 13:35:54 +0800 Received: from MTKCAS32.mediatek.inc (172.27.4.184) by MTKMBS31DR.mediatek.inc (172.27.6.102) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Sat, 17 Aug 2019 13:35:49 +0800 Received: from [10.17.3.153] (172.27.4.253) by MTKCAS32.mediatek.inc (172.27.4.170) with Microsoft SMTP Server id 15.0.1395.4 via Frontend Transport; Sat, 17 Aug 2019 13:35:48 +0800 Message-ID: <1566020147.21623.37.camel@mhfsdcap03> Subject: Re: [RFC,V2,2/2] media: i2c: Add Omnivision OV02A10 camera sensor driver From: Dongchun Zhu To: Bingbu Cao CC: , , , , , , , , , , , , , , Date: Sat, 17 Aug 2019 13:35:47 +0800 In-Reply-To: <8639e67ad6db40b78e48b00c875187dc@mtkmbs02n1.mediatek.inc> References: <20190704084651.3105-1-dongchun.zhu@mediatek.com> <20190704084651.3105-3-dongchun.zhu@mediatek.com> <8639e67ad6db40b78e48b00c875187dc@mtkmbs02n1.mediatek.inc> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.10.4-0ubuntu2 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-TM-SNTS-SMTP: 0DB10638E1E1D8E7DB79304CE9922168460CDEE8C97D1E2AA852E96DBFFCF55F2000:8 X-MTK: N Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Bingbu, On Tue, 2019-07-08 at 15:52 +0800, Bingbu Cao wrote: > -----Original Message----- > From: Linux-mediatek [mailto:linux-mediatek-bounces@lists.infradead.org] On Behalf Of Bingbu Cao > Sent: Monday, July 08, 2019 3:53 PM > To: Dongchun Zhu (朱东春) ; mchehab@kernel.org; robh+dt@kernel.org; mark.rutland@arm.com; sakari.ailus@linux.intel.com; --to=drinkcat@chromium.org; tfiga@chromium.org; matthias.bgg@gmail.com; bingbu.cao@intel.com > Cc: devicetree@vger.kernel.org; srv_heupstream ; Shengnan Wang (王圣男) ; Sj Huang (黃信璋) ; linux-mediatek@lists.infradead.org; Louis Kuo (郭德寧) ; linux-arm-kernel@lists.infradead.org; linux-media@vger.kernel.org > Subject: Re: [RFC,V2,2/2] media: i2c: Add Omnivision OV02A10 camera sensor driver > > > > On 7/4/19 4:46 PM, dongchun.zhu@mediatek.com wrote: > > From: Dongchun Zhu > > > > This patch adds a V4L2 sub-device driver for OV02A10 image sensor. > > The OV02A10 is a 1/5" CMOS sensor from Omnivision. > > Supports output format: 10-bit Raw. > > The OV02A10 has a single MIPI lane interface and use the I2C bus for control and the CSI-2 bus for data. > > > > Signed-off-by: Dongchun Zhu > > > snip > > + > > +/* MIPI color bar enable output */ > > +static const struct regval ov02a10_test_pattern_enable_regs[] = { > > +{0xfd, 0x01}, > > +{0x0d, 0x00}, > > +{0xb6, 0x01}, > > +{0x01, 0x01}, > > +{0xfd, 0x01}, > > +{0xac, 0x01}, > > +{REG_NULL, 0x00} > Actually, you can use ARRAY_SIZE to write the regs, the REG_NULL can be removed. However, it is not a problem. > ... > snip... Thanks for kindly reminder. It would remain, just as OV5695/OV2685 did. > > +static int ov02a10_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) { > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > +struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > > +int ret = 0; > > + > > +mutex_lock(&ov02a10->mutex); > > + > > +if (ov02a10->streaming) { > > +ret = -EBUSY; > > +goto unlock; > I like return -EBUSY directly after mutex_unlock here and return 0 below. Got it. Fixed in next release. > > +} > > + > > +/* only one mode supported */ > > +mbus_fmt->code = ov02a10->fmt.code; > > +ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > > +ov02a10->fmt = fmt->format; > > + > > +unlock: > > +mutex_unlock(&ov02a10->mutex); > > + > > +return ret; > > +} > > + > > +static int ov02a10_get_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) { > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > +struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > > + > > +mutex_lock(&ov02a10->mutex); > > + > > +fmt->format = ov02a10->fmt; > > +mbus_fmt->code = ov02a10->fmt.code; > > +ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt); > > + > > +mutex_unlock(&ov02a10->mutex); > > + > > +return 0; > > +} > > + > > +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) { > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > +if (code->index >= ARRAY_SIZE(supported_modes) || !(code->index)) > > +return -EINVAL; > > + > > +code->code = ov02a10->fmt.code; > > + > > +return 0; > > +} > > + > > +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_frame_size_enum *fse) { > > +if (fse->index >= ARRAY_SIZE(supported_modes) || !(fse->index)) > > +return -EINVAL; > > + > > +fse->min_width = supported_modes[fse->index].width; > > +fse->max_width = supported_modes[fse->index].width; > > +fse->max_height = supported_modes[fse->index].height; > > +fse->min_height = supported_modes[fse->index].height; > > + > > +return 0; > > +} > > + > > +static int __ov02a10_power_on(struct ov02a10 *ov02a10) { > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +struct device *dev = &client->dev; > > +int ret; > > + > > +ret = clk_prepare_enable(ov02a10->xvclk); > > +if (ret < 0) { > > +dev_err(dev, "Failed to enable xvclk\n"); > > +return ret; > > +} > > + > > +/* note: set 0 is high, set 1 is low */ > > +gpiod_set_value_cansleep(ov02a10->reset_gpio, 1); > > +gpiod_set_value_cansleep(ov02a10->pwdn_gpio, 0); > > + > > +ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); > > +if (ret < 0) { > > +dev_err(dev, "Failed to enable regulators\n"); > > +goto disable_clk; > > +} > > +msleep_range(7); > > + > > +gpiod_set_value_cansleep(ov02a10->pwdn_gpio, 1); > > +msleep_range(10); > > + > > +gpiod_set_value_cansleep(ov02a10->reset_gpio, 0); > > +msleep_range(10); > > + > > +return 0; > > + > > +disable_clk: > > +clk_disable_unprepare(ov02a10->xvclk); > > + > > +return ret; > > +} > > + > > +static void __ov02a10_power_off(struct ov02a10 *ov02a10) { > > +clk_disable_unprepare(ov02a10->xvclk); > > +gpiod_set_value_cansleep(ov02a10->reset_gpio, 1); > > +gpiod_set_value_cansleep(ov02a10->pwdn_gpio, 1); > > +regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies); } > > + > > +static int __ov02a10_start_stream(struct ov02a10 *ov02a10) { > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +int ret; > > + > > +/* Apply default values of current mode */ > > +ret = ov02a10_write_array(ov02a10, ov02a10->cur_mode->reg_list); > > +if (ret) > > +return ret; > > + > > +/* Apply customized values from user */ > > +ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler); > > +if (ret) > > +return ret; > > + > > +/* Set Orientation be 180 degree */ > Set orientation to 180 degree Got it. Fixed in next release. > > +if (ov02a10->upside_down) { > > +ret = ov02a10_write_reg(ov02a10, REG_MIRROR_FLIP_CONTROL, > > +REG_CONFIG_MIRROR_FLIP); > > +if (ret) { > > +dev_err(&client->dev, "%s failed to set orientation\n", > > +__func__); > > +return ret; > > +} > > +ret = ov02a10_write_reg(ov02a10, REG_GLOBAL_EFFECTIVE, > > +REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +} > > + > > +/* set stream on register */ > > +return ov02a10_write_reg(ov02a10, > > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STREAMING); } > > + > > +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10) { > > +return ov02a10_write_reg(ov02a10, > > + REG_SC_CTRL_MODE, SC_CTRL_MODE_STANDBY); } > > + > > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg) { > > +struct v4l2_subdev_format fmt = { 0 }; > > + > > +fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > > +fmt.format.width = 1600; > > +fmt.format.height = 1200; > > + > > +ov02a10_set_fmt(subdev, cfg, &fmt); > > + > > +return 0; > > +} > > + > > +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on) { > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +int ret = 0; > > + > > +dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on); > > +mutex_lock(&ov02a10->mutex); > > + > > +if (ov02a10->streaming == on) > > +goto unlock_and_return; > > + > > +if (on) { > > +ret = pm_runtime_get_sync(&client->dev); > > +if (ret < 0) { > > +pm_runtime_put_noidle(&client->dev); > > +goto unlock_and_return; > > +} > > + > > +ret = __ov02a10_start_stream(ov02a10); > > +if (ret) { > > +__ov02a10_stop_stream(ov02a10); > > +ov02a10->streaming = !on; > > +goto err_rpm_put; > > +} > > +} else { > > +__ov02a10_stop_stream(ov02a10); > > +pm_runtime_put(&client->dev); > > +} > > + > > +ov02a10->streaming = on; > > +mutex_unlock(&ov02a10->mutex); > > + > > +return ret; > > + > > +err_rpm_put: > > +pm_runtime_put(&client->dev); > > +unlock_and_return: > > +mutex_unlock(&ov02a10->mutex); > > + > > +return ret; > > +} > > + > > +static int ov02a10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh > > +*fh) { > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > +struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd, > > +fh->pad, > > +0); > > + > > +mutex_lock(&ov02a10->mutex); > > +/* Initialize try_fmt */ > > +try_fmt->code = ov02a10->fmt.code; > > +ov02a10_fill_fmt(&supported_modes[0], try_fmt); > > + > > +mutex_unlock(&ov02a10->mutex); > > + > > +return 0; > > +} > > + > > +static int __maybe_unused ov02a10_runtime_resume(struct device *dev) > > +{ > > +struct i2c_client *client = to_i2c_client(dev); > > +struct v4l2_subdev *sd = i2c_get_clientdata(client); > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > +return __ov02a10_power_on(ov02a10); > > +} > > + > > +static int __maybe_unused ov02a10_runtime_suspend(struct device *dev) > > +{ > > +struct i2c_client *client = to_i2c_client(dev); > > +struct v4l2_subdev *sd = i2c_get_clientdata(client); > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > +__ov02a10_power_off(ov02a10); > > + > > +return 0; > > +} > > + > > +static const struct dev_pm_ops ov02a10_pm_ops = { > > +SET_RUNTIME_PM_OPS(ov02a10_runtime_suspend, > > + ov02a10_runtime_resume, NULL) > > +}; > > + > > +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, s32 > > +value) { > > +if (value) > > +return ov02a10_write_array(ov02a10, > > + ov02a10_test_pattern_enable_regs); > > + > > +return ov02a10_write_array(ov02a10, > > +ov02a10_test_pattern_disable_regs); > > +} > > + > > +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl) { > > +struct ov02a10 *ov02a10 = container_of(ctrl->handler, > > + struct ov02a10, ctrl_handler); > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +s64 max_expo; > > +int ret; > > + > > +/* Propagate change of current control to all related controls */ > > +if (ctrl->id == V4L2_CID_VBLANK) { > > +/* Update max exposure while meeting expected vblanking */ > > +max_expo = ov02a10->cur_mode->height + ctrl->val - 4; > > +__v4l2_ctrl_modify_range(ov02a10->exposure, > > + ov02a10->exposure->minimum, max_expo, > > + ov02a10->exposure->step, > > + ov02a10->exposure->default_value); > > +} > > + > > +/* V4L2 controls values will be applied only when power is already up */ > > +if (!pm_runtime_get_if_in_use(&client->dev)) > > +return 0; > > + > > +switch (ctrl->id) { > > +case V4L2_CID_EXPOSURE: > > +ret = ov02a10_write_reg(ov02a10, REG_PAGE_SWITCH, REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +ret = ov02a10_write_reg(ov02a10, OV02A10_REG_EXPOSURE_H, > > +((ctrl->val >> 8) & 0xFF)); > > +if (!ret) { > > +ret = ov02a10_write_reg(ov02a10, OV02A10_REG_EXPOSURE_L, > > +(ctrl->val & 0xFF)); > > +if (ret < 0) > > +return ret; > > +} > > +ret = ov02a10_write_reg(ov02a10, REG_GLOBAL_EFFECTIVE, > > +REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +break; > > +case V4L2_CID_ANALOGUE_GAIN: > > +ret = ov02a10_write_reg(ov02a10, REG_PAGE_SWITCH, REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +ret = ov02a10_write_reg(ov02a10, OV02A10_REG_GAIN, > > +(ctrl->val & 0xFF)); > > +if (ret < 0) > > +return ret; > > +ret = ov02a10_write_reg(ov02a10, REG_GLOBAL_EFFECTIVE, > > +REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +break; > > +case V4L2_CID_VBLANK: > > +ret = ov02a10_write_reg(ov02a10, REG_PAGE_SWITCH, REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +ret = ov02a10_write_reg(ov02a10, OV02A10_REG_VTS_H, > > +(((ctrl->val + > > +ov02a10->cur_mode->height - 1224) >> 8) > > +& 0xFF)); > 1224 is hard-coded here, could you add some comments? Is it a sensor setting sensitive value? This would be fixed in next release. 1224 is the basic line for OV02a10 CMOS sensor. In fact, there is one relationship between framelength and v-blanking. That is, framelength = basic_line + v-blanking. Thus we could modify the value of v-blanking register to update framelength. > > +if (!ret) { > > +ret = ov02a10_write_reg(ov02a10, OV02A10_REG_VTS_L, > > +((ctrl->val + > > +ov02a10->cur_mode->height - > > +1224) & 0xFF)); > ditto. Fixed in next release. > > +if (ret < 0) > > +return ret; > > +} > > +ret = ov02a10_write_reg(ov02a10, REG_GLOBAL_EFFECTIVE, > > +REG_ENABLE); > > +if (ret < 0) > > +return ret; > > +break; > > +case V4L2_CID_TEST_PATTERN: > > +ret = ov02a10_set_test_pattern(ov02a10, ctrl->val); > > +if (ret < 0) > > +return ret; > > +break; > > +default: > > +dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n", > > + __func__, ctrl->id, ctrl->val); > > +ret = -EINVAL; > > +break; > > +}; > > + > > +pm_runtime_put(&client->dev); > > + > > +return ret; > > +} > > + > > +static const struct v4l2_subdev_video_ops ov02a10_video_ops = { > > +.s_stream = ov02a10_s_stream, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = { > > +.init_cfg = ov02a10_entity_init_cfg, > > +.enum_mbus_code = ov02a10_enum_mbus_code, > > +.enum_frame_size = ov02a10_enum_frame_sizes, > > +.get_fmt = ov02a10_get_fmt, > > +.set_fmt = ov02a10_set_fmt, > > +}; > > + > > +static const struct v4l2_subdev_ops ov02a10_subdev_ops = { > > +.video= &ov02a10_video_ops, > > +.pad= &ov02a10_pad_ops, > > +}; > > + > > +static const struct media_entity_operations ov02a10_subdev_entity_ops = { > > +.link_validate = v4l2_subdev_link_validate, }; > > + > > +static const struct v4l2_subdev_internal_ops ov02a10_internal_ops = { > > +.open = ov02a10_open, > > +}; > > + > > +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = { > > +.s_ctrl = ov02a10_set_ctrl, > > +}; > > + > > +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10) { > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +const struct ov02a10_mode *mode; > > +struct v4l2_ctrl_handler *handler; > > +struct v4l2_ctrl *ctrl; > > +u64 exposure_max; > > +u32 pixel_rate, h_blank; > > +int ret; > > + > > +handler = &ov02a10->ctrl_handler; > > +mode = ov02a10->cur_mode; > > +ret = v4l2_ctrl_handler_init(handler, 10); > > +if (ret) > > +return ret; > > +handler->lock = &ov02a10->mutex; > > + > > +ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, > > + 0, 0, link_freq_menu_items); > > +if (ctrl) > > +ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > +pixel_rate = (link_freq_menu_items[0] * 2 * OV02A10_LANES) / > > + OV02A10_BITS_PER_SAMPLE; > > +v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, > > + 0, pixel_rate, 1, pixel_rate); > > + > > +h_blank = mode->hts_def - mode->width; > > +ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, > > + h_blank, h_blank, 1, h_blank); > > +if (ov02a10->hblank) > > +ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > +ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_VBLANK, mode->vts_def - > > + mode->height, > > + OV02A10_VTS_MAX - mode->height, 1, > > + mode->vts_def - mode->height); > > + > > +exposure_max = mode->vts_def - 4; > > +ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_EXPOSURE, > > + OV02A10_EXPOSURE_MIN, > > + exposure_max, > > + OV02A10_EXPOSURE_STEP, > > + mode->exp_def); > > + > > +ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops, > > + V4L2_CID_ANALOGUE_GAIN, > > + OV02A10_GAIN_MIN, > > + OV02A10_GAIN_MAX, > > + OV02A10_GAIN_STEP, > > + OV02A10_GAIN_DEFAULT); > > + > > +ov02a10->test_pattern = > > + v4l2_ctrl_new_std_menu_items(handler, > > +&ov02a10_ctrl_ops, > > +V4L2_CID_TEST_PATTERN, > > +ARRAY_SIZE(ov02a10_test_pattern_menu) - > > +1, 0, 0, ov02a10_test_pattern_menu); > > + > > +if (handler->error) { > > +ret = handler->error; > > +dev_err(&client->dev, > > +"Failed to init controls(%d)\n", ret); > > +goto err_free_handler; > > +} > > + > > +ov02a10->subdev.ctrl_handler = handler; > > + > > +return 0; > > + > > +err_free_handler: > > +v4l2_ctrl_handler_free(handler); > > + > > +return ret; > > +} > > + > > +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10) { > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +u16 id; > > +u8 pid = 0; > > +u8 ver = 0; > > +int ret; > > + > > +/* Check sensor revision */ > > +ret = ov02a10_read_reg(ov02a10, OV02A10_REG_CHIP_ID_H, &pid); > > +if (ret) > > +return ret; > > + > > +ret = ov02a10_read_reg(ov02a10, OV02A10_REG_CHIP_ID_L, &ver); > > +if (ret) > > +return ret; > > + > > +id = OV02A10_ID(pid, ver); > > +if (id != CHIP_ID) { > > +dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id); > > +return ret; > > +} > > +dev_dbg(&client->dev, "Detected OV%04X sensor\n", id); > > + > > +return 0; > > +} > > + > > +static int ov02a10_configure_regulators(struct ov02a10 *ov02a10) { > > +struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev); > > +unsigned int i; > > + > > +for (i = 0; i < OV02A10_NUM_SUPPLIES; i++) > > +ov02a10->supplies[i].supply = ov02a10_supply_names[i]; > > + > > +return devm_regulator_bulk_get(&client->dev, > > + OV02A10_NUM_SUPPLIES, > > + ov02a10->supplies); > > +} > > + > > +static int ov02a10_probe(struct i2c_client *client) { > > +struct device *dev = &client->dev; > > +struct ov02a10 *ov02a10; > > +u32 rotation; > > +u32 xclk_freq; > > +int ret; > > + > > +dev_dbg(dev, "ov02a10 probe\n"); > I think this line is not needed at all. Removed in next release. > > +ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL); > > +if (!ov02a10) > > +return -ENOMEM; > > + > > +v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops); > > +ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; > > + > > +/* optional indication of physical rotation of sensor */ > > +ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", > > + &rotation); > > +if (!ret) { > > +switch (rotation) { > > +case 180: > > +ov02a10->upside_down = true; > > +ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10; > > +break; > > +case 0: > > +break; > > +default: > > +dev_warn(dev, "%u degrees rotation is not supported, ignoring...\n", > > + rotation); > > +} > > +} > > + > > +/* get system clock (xvclk) */ > > +ov02a10->xvclk = devm_clk_get(dev, "xvclk"); > > +if (IS_ERR(ov02a10->xvclk)) { > > +dev_err(dev, "Failed to get xvclk\n"); > > +return -EINVAL; > > +} > > + > > +ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); > > +if (ret) { > > +dev_err(dev, "Failed to get xclk frequency\n"); > > +return ret; > > +} > > + > > +/* external clock must be 24MHz, allow 1% tolerance */ > > +if (xclk_freq < 23760000 || xclk_freq > 24240000) { > > +dev_err(dev, "external clock frequency %u is not supported\n", > > +xclk_freq); > > +return -EINVAL; > > +} > > +dev_dbg(dev, "external clock frequency %u\n", xclk_freq); > > + > > +ret = clk_set_rate(ov02a10->xvclk, xclk_freq); > > +if (ret) { > > +dev_err(dev, "Failed to set xvclk frequency (24MHz)\n"); > > +return ret; > > +} > > + > > +ov02a10->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_LOW); > > +if (IS_ERR(ov02a10->pwdn_gpio)) { > > +dev_err(dev, "Failed to get powerdown-gpios\n"); > > +return -EINVAL; > > +} > > + > > +ov02a10->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > > +if (IS_ERR(ov02a10->reset_gpio)) { > > +dev_err(dev, "Failed to get reset-gpios\n"); > > +return -EINVAL; > > +} > > + > > +ret = ov02a10_configure_regulators(ov02a10); > > +if (ret) { > > +dev_err(dev, "Failed to get power regulators\n"); > > +return ret; > > +} > > + > > +mutex_init(&ov02a10->mutex); > > +ov02a10->cur_mode = &supported_modes[0]; > > +ret = ov02a10_initialize_controls(ov02a10); > > +if (ret) { > > +dev_err(dev, "Failed to initialize controls\n"); > > +goto err_destroy_mutex; > > +} > > + > > +ret = __ov02a10_power_on(ov02a10); > > +if (ret) > > +goto err_free_handler; > > + > > +ret = ov02a10_check_sensor_id(ov02a10); > > +if (ret) > > +goto err_power_off; > > + > > +ov02a10->subdev.internal_ops = &ov02a10_internal_ops; > > +ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > +ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops; > > +ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > +ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE; > > +ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad); > > +if (ret < 0) { > > +dev_err(dev, "failed to init entity pads: %d", ret); > > +goto err_power_off; > > +} > > + > > +ret = v4l2_async_register_subdev(&ov02a10->subdev); > > +if (ret) { > > +dev_err(dev, "failed to register V4L2 subdev: %d", > > +ret); > > +goto err_clean_entity; > > +} > > + > > +pm_runtime_set_active(dev); > > +pm_runtime_enable(dev); > > +pm_runtime_idle(dev); > > + > > +return 0; > > + > > +err_clean_entity: > > +media_entity_cleanup(&ov02a10->subdev.entity); > > +err_power_off: > > +__ov02a10_power_off(ov02a10); > > +err_free_handler: > > +v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler); > > +err_destroy_mutex: > > +mutex_destroy(&ov02a10->mutex); > > + > > +return ret; > > +} > > + > > +static int ov02a10_remove(struct i2c_client *client) { > > +struct v4l2_subdev *sd = i2c_get_clientdata(client); > > +struct ov02a10 *ov02a10 = to_ov02a10(sd); > > + > > +v4l2_async_unregister_subdev(sd); > > +media_entity_cleanup(&sd->entity); > > +v4l2_ctrl_handler_free(sd->ctrl_handler); > > +pm_runtime_disable(&client->dev); > > +if (!pm_runtime_status_suspended(&client->dev)) > > +__ov02a10_power_off(ov02a10); > > +pm_runtime_set_suspended(&client->dev); > > +mutex_destroy(&ov02a10->mutex); > > + > > +return 0; > > +} > > + > > +#if IS_ENABLED(CONFIG_OF) > > +static const struct of_device_id ov02a10_of_match[] = { > > +{ .compatible = "ovti,ov02a10" }, > > +{}, > > +}; > > +MODULE_DEVICE_TABLE(of, ov02a10_of_match); #endif > > + > > +static struct i2c_driver ov02a10_i2c_driver = { > > +.driver = { > > +.name = "ov02a10", > > +.pm = &ov02a10_pm_ops, > > +.of_match_table = ov02a10_of_match, > > +}, > > +.probe_new= &ov02a10_probe, > > +.remove= &ov02a10_remove, > > +}; > > + > > +module_i2c_driver(ov02a10_i2c_driver); > > + > > +MODULE_AUTHOR("Dongchun Zhu "); > > +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver"); > > +MODULE_LICENSE("GPL v2"); > > + > > > Other part looks good to me. Many thanks for your review. I really appreciate the effort you all made for the work. > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek > *********************MEDIATEK Confidential/Internal Use*********************