From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <mchehab@kernel.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <drinkcat@chromium.org>,
<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
<bingbu.cao@intel.com>, <srv_heupstream@mediatek.com>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>,
Ben Kao <ben.kao@intel.com>
Subject: Re: [V1, 1/2] media: dt-bindings: media: i2c: Add bindings for ov8856
Date: Mon, 9 Sep 2019 11:55:48 +0800 [thread overview]
Message-ID: <1568001348.21623.173.camel@mhfsdcap03> (raw)
In-Reply-To: <20190808165416.GA1845@kekkonen.localdomain>
Hi Sakari,
On Thu, 2019-08-08 at 19:54 +0300, Sakari Ailus wrote:
> Hi Dongchun,
>
> (Cc'ing Ben, too.)
>
> On Thu, Aug 08, 2019 at 05:22:14PM +0800, dongchun.zhu@mediatek.com wrote:
> > From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> >
> > Add device tree binding documentation for the ov8856 camera sensor.
> >
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> > .../devicetree/bindings/media/i2c/ov8856.txt | 41 ++++++++++++++++++++++
> > MAINTAINERS | 1 +
> > 2 files changed, 42 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.txt b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> > new file mode 100644
> > index 0000000..96b10e0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> > @@ -0,0 +1,41 @@
> > +* Omnivision OV8856 MIPI CSI-2 sensor
> > +
> > +Required Properties:
> > +- compatible: shall be "ovti,ov8856"
> > +- clocks: reference to the xvclk input clock
> > +- clock-names: shall be "xvclk"
>
> Could you add "clock-frequency" property here, please, and specify the
> upper and lower limits?
>
Sorry, this frequency of the external clock to the sensor and
link-frequencies would be added in DT in next release.
> > +- avdd-supply: Analog voltage supply, 2.8 volts
> > +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> > +- dvdd-supply: Digital core voltage supply, 1.2 volts
> > +- reset-gpios: Low active reset gpio
> > +
> > +The device node shall contain one 'port' child node with an
> > +'endpoint' subnode for its digital output video port,
> > +in accordance with the video interface bindings defined in
> > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +The endpoint optional property 'data-lanes' shall be "<0 1 3 4>".
>
> If you don't support lane reordering, then monotonically incrementing lane
> numbers from 1 onwards are recommended.
>
> Please also make the property mandatory.
>
data-lanes would be required property on endpoint in next release.
> > +
> > +Example:
> > +&i2c7 {
> > + ov8856: camera-sensor@10 {
> > + compatible = "ovti,ov8856";
> > + reg = <0x10>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&clk_24m_cam>;
> > +
> > + clocks = <&cru SCLK_TESTCLKOUT1>;
> > + clock-names = "xvclk";
> > +
> > + avdd-supply = <&mt6358_vcama2_reg>;
> > + dvdd-supply = <&mt6358_vcamd_reg>;
> > + dovdd-supply = <&mt6358_vcamio_reg>;
> > + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> > +
> > + port {
> > + wcam_out: endpoint {
> > + remote-endpoint = <&mipi_in_wcam>;
> > + data-lanes = <0 1 3 4>;
> > + };
> > + };
> > + };
> > +};
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 783569e..7746c6b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11889,6 +11889,7 @@ L: linux-media@vger.kernel.org
> > T: git git://linuxtv.org/media_tree.git
> > S: Maintained
> > F: drivers/media/i2c/ov8856.c
> > +F: Documentation/devicetree/bindings/media/i2c/ov8856.txt
> >
> > OMNIVISION OV9650 SENSOR DRIVER
> > M: Sakari Ailus <sakari.ailus@linux.intel.com>
>
next prev parent reply other threads:[~2019-09-09 3:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 9:22 [V1, 0/2] media: ov8856: DT bindings and sensor mode improvements dongchun.zhu
2019-08-08 9:22 ` [V1, 1/2] media: dt-bindings: media: i2c: Add bindings for ov8856 dongchun.zhu
2019-08-08 16:54 ` Sakari Ailus
2019-08-13 11:55 ` Sakari Ailus
2019-09-09 3:55 ` Dongchun Zhu [this message]
2019-08-08 9:22 ` [V1, 2/2] media: i2c: Add more sensor mode for ov8856 camera sensor dongchun.zhu
2019-08-08 13:53 ` Sakari Ailus
2019-09-09 8:46 ` Dongchun Zhu
2019-09-09 10:06 ` Sakari Ailus
2019-08-23 10:01 ` Tomasz Figa
2019-09-09 9:27 ` Dongchun Zhu
2019-09-10 13:23 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568001348.21623.173.camel@mhfsdcap03 \
--to=dongchun.zhu@mediatek.com \
--cc=ben.kao@intel.com \
--cc=bingbu.cao@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=louis.kuo@mediatek.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shengnan.wang@mediatek.com \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).