From: Jenkins Builder Robot <jenkins@linuxtv.org>
To: mchehab@kernel.org, linux-media@vger.kernel.org
Subject: Build failed in Jenkins: v4l-utils #43
Date: Wed, 2 Oct 2019 08:16:44 +0000 (UTC) [thread overview]
Message-ID: <1586568084.1.1570004204603.JavaMail.jenkins@builder.linuxtv.org> (raw)
See <https://builder.linuxtv.org/job/v4l-utils/43/display/redirect?page=changes>
Changes:
[hverkuil-cisco] keytable: add new generated keymaps
[hverkuil-cisco] msg2ctl.pl: add newline after log_msg
[hverkuil-cisco] cec-follower: drop the hardcoded UI commands list
[hverkuil-cisco] cec-ctl/cec-log: use new CEC_OP_UI_CMD defines
------------------------------------------
[...truncated 1.10 MB...]
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope
#define arg_on arg_u8
^~~~~~
./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’
log_arg(&arg_on, "on", on);
^~~~~~
./cec-log.h:800:16: note: suggested alternative: ‘arg_on’
#define arg_on arg_u8
^~~~~~
./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’
log_arg(&arg_on, "on", on);
^~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2584:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_on, "on", on);
^~~~~~~
./cec-log.h:2584:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_on, "on", on);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope
#define arg_on arg_u8
^~~~~~
./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’
log_arg(&arg_on, "on", on);
^~~~~~
./cec-log.h:800:16: note: suggested alternative: ‘arg_on’
#define arg_on arg_u8
^~~~~~
./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’
log_arg(&arg_on, "on", on);
^~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2594:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_on, "on", on);
^~~~~~~
./cec-log.h:2594:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_on, "on", on);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:818:21: error: ‘arg_u8’ was not declared in this scope
#define arg_minutes arg_u8
^~~~~~
./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’
log_arg(&arg_minutes, "minutes", minutes);
^~~~~~~~~~~
./cec-log.h:818:21: note: suggested alternative: ‘arg_on’
#define arg_minutes arg_u8
^~~~~~
./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’
log_arg(&arg_minutes, "minutes", minutes);
^~~~~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2603:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_minutes, "minutes", minutes);
^~~~~~~
./cec-log.h:2603:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_minutes, "minutes", minutes);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope
#define arg_time arg_string
^~~~~~~~~~
./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’
log_arg(&arg_time, "time", time);
^~~~~~~~
./cec-log.h:811:18: note: suggested alternative: ‘arg_time’
#define arg_time arg_string
^~~~~~~~~~
./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’
log_arg(&arg_time, "time", time);
^~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2611:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_time, "time", time);
^~~~~~~
./cec-log.h:2611:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_time, "time", time);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope
#define arg_time arg_string
^~~~~~~~~~
./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’
log_arg(&arg_time, "time", time);
^~~~~~~~
./cec-log.h:811:18: note: suggested alternative: ‘arg_time’
#define arg_time arg_string
^~~~~~~~~~
./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’
log_arg(&arg_time, "time", time);
^~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2619:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_time, "time", time);
^~~~~~~
./cec-log.h:2619:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_time, "time", time);
^~~~~~~
log_msg
./cec-log.h:2630:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src);
^~~~~~~
./cec-log.h:2630:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:579:19: error: ‘arg_u16’ was not declared in this scope
#define arg_major arg_u16
^~~~~~~
./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’
log_arg(&arg_major, "major", major);
^~~~~~~~~
./cec-log.h:579:19: note: suggested alternative: ‘arg_osd’
#define arg_major arg_u16
^~~~~~~
./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’
log_arg(&arg_major, "major", major);
^~~~~~~~~
./cec-log.h:801:17: error: ‘arg_u8’ was not declared in this scope
#define arg_vol arg_u8
^~~~~~
./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’
log_arg(&arg_vol, "vol", vol);
^~~~~~~
./cec-log.h:801:17: note: suggested alternative: ‘arg_on’
#define arg_vol arg_u8
^~~~~~
./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’
log_arg(&arg_vol, "vol", vol);
^~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2642:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_vol, "vol", vol);
^~~~~~~
./cec-log.h:2642:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_vol, "vol", vol);
^~~~~~~
log_msg
./cec-log.h:2662:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
^~~~~~~
./cec-log.h:2662:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope
#define arg_freq arg_u16
^~~~~~~
./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’
log_arg(&arg_freq, "freq", freq);
^~~~~~~~
./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’
#define arg_freq arg_u16
^~~~~~~
./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’
log_arg(&arg_freq, "freq", freq);
^~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2679:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
^~~~~~~
./cec-log.h:2679:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:792:18: error: ‘arg_u16’ was not declared in this scope
#define arg_chan arg_u16
^~~~~~~
./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’
log_arg(&arg_chan, "chan", chan);
^~~~~~~~
./cec-log.h:792:18: note: suggested alternative: ‘arg_osd’
#define arg_chan arg_u16
^~~~~~~
./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’
log_arg(&arg_chan, "chan", chan);
^~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2702:3: error: ‘log_arg’ was not declared in this scope
log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type);
^~~~~~~
./cec-log.h:2702:3: note: suggested alternative: ‘log_msg’
log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type);
^~~~~~~
log_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope
#define arg_freq arg_u16
^~~~~~~
./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’
log_arg(&arg_freq, "freq", freq);
^~~~~~~~
./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’
#define arg_freq arg_u16
^~~~~~~
./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’
log_arg(&arg_freq, "freq", freq);
^~~~~~~~
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h:2719:3: error: ‘log_htng_unknown_msg’ was not declared in this scope
log_htng_unknown_msg(msg);
^~~~~~~~~~~~~~~~~~~~
./cec-log.h:2719:3: note: suggested alternative: ‘log_htng_msg’
log_htng_unknown_msg(msg);
^~~~~~~~~~~~~~~~~~~~
log_htng_msg
In file included from cec-follower.h:25,
from cec-follower.cpp:21:
./cec-log.h: At global scope:
./cec-log.h:861:29: warning: ‘messages’ defined but not used [-Wunused-variable]
static const struct message messages[] = {
^~~~~~~~
make[3]: *** [Makefile:607: cec_follower-cec-follower.o] Error 1
make[3]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/utils/cec-follower'>
make[2]: *** [Makefile:481: all-recursive] Error 1
make[2]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/utils'>
make[1]: *** [Makefile:590: all-recursive] Error 1
make[1]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/'>
make: *** [Makefile:517: all] Error 2
Build step 'Execute shell' marked build as failure
next reply other threads:[~2019-10-02 8:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 8:16 Jenkins Builder Robot [this message]
2019-10-02 8:25 ` Build failed in Jenkins: v4l-utils #43 Hans Verkuil
2019-10-02 9:36 ` Mauro Carvalho Chehab
2019-10-02 9:49 ` Hans Verkuil
2019-10-02 10:41 ` Mauro Carvalho Chehab
2019-10-02 10:56 ` Hans Verkuil
2019-10-02 9:01 ` Build failed in Jenkins: v4l-utils #44 Jenkins Builder Robot
2019-10-02 9:30 ` Jenkins build is back to normal : v4l-utils #45 Jenkins Builder Robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586568084.1.1570004204603.JavaMail.jenkins@builder.linuxtv.org \
--to=jenkins@linuxtv.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).