Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [V8, 0/2] media: i2c: Add support for OV02A10 sensor
@ 2020-05-09  8:06 Dongchun Zhu
  2020-05-09  8:06 ` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings Dongchun Zhu
  2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
  0 siblings, 2 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-09  8:06 UTC (permalink / raw)
  To: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, sakari.ailus, drinkcat, tfiga, matthias.bgg,
	bingbu.cao
  Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu

Hello,

This series adds DT bindings in YAML and V4L2 sub-device driver for Omnivision's
OV02A10 2 megapixel CMOS 1/5" sensor, which has a single MIPI lane interface
and output format of 10-bit RAW.

The driver is implemented with V4L2 framework.
 - Async registered as a V4L2 sub-device.
 - As the first component of camera system including Seninf, ISP pipeline.
 - A media entity that provides one source pad in common and two for dual-cam.
 
Previous versions of this patch-set can be found here:
 v7: https://lore.kernel.org/linux-media/20200430080924.1140-1-dongchun.zhu@mediatek.com/
 v6: https://lore.kernel.org/linux-media/20191211112849.16705-1-dongchun.zhu@mediatek.com/
 v5: https://lore.kernel.org/linux-media/20191104105713.24311-1-dongchun.zhu@mediatek.com/
 v4: https://lore.kernel.org/linux-media/20190907092728.23897-1-dongchun.zhu@mediatek.com/
 v3: https://lore.kernel.org/linux-media/20190819034331.13098-1-dongchun.zhu@mediatek.com/
 v2: https://lore.kernel.org/linux-media/20190704084651.3105-1-dongchun.zhu@mediatek.com/
 v1: https://lore.kernel.org/linux-media/20190523102204.24112-1-dongchun.zhu@mediatek.com/

Changes of v8 mainly address comments from Rob, Tomasz, Sakari, Ann.
 - Update more details about the private DT property "ovti,mipi-tx-speed"
 - Drop unnecessary description of "powerdown-gpios" and "reset-gpios"
 - Add "data-lanes" and "clock-noncontinuous" to be present
 - Set P1:0xA1 to 0x04 to follow the newest DB settings

Please review.
Thanks.

Dongchun Zhu (2):
  media: dt-bindings: media: i2c: Document OV02A10 bindings
  media: i2c: ov02a10: Add OV02A10 image sensor driver

 .../bindings/media/i2c/ovti,ov02a10.yaml           |  184 ++++
 MAINTAINERS                                        |    8 +
 drivers/media/i2c/Kconfig                          |   13 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/ov02a10.c                        | 1094 ++++++++++++++++++++
 5 files changed, 1300 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 create mode 100644 drivers/media/i2c/ov02a10.c

-- 
2.9.2

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-09  8:06 [V8, 0/2] media: i2c: Add support for OV02A10 sensor Dongchun Zhu
@ 2020-05-09  8:06 ` Dongchun Zhu
  2020-05-11 16:02   ` Rob Herring
  2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
  1 sibling, 1 reply; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-09  8:06 UTC (permalink / raw)
  To: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, sakari.ailus, drinkcat, tfiga, matthias.bgg,
	bingbu.cao
  Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu

Add DT bindings documentation for Omnivision OV02A10 image sensor.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
 .../bindings/media/i2c/ovti,ov02a10.yaml           | 184 +++++++++++++++++++++
 MAINTAINERS                                        |   7 +
 2 files changed, 191 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
new file mode 100644
index 0000000..5468d1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
+  image sensor, which is the latest production derived from Omnivision's CMOS
+  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
+  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
+  sensor output is available via CSI-2 serial data output.
+
+properties:
+  compatible:
+    const: ovti,ov02a10
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: top mux camtg clock
+      - description: devider clock
+
+  clock-names:
+    items:
+      - const: eclk
+      - const: freq_mux
+
+  clock-frequency:
+    description:
+      Frequency of the eclk clock in Hertz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  rotation:
+    description:
+      Definition of the sensor's placement, valid values are 0 and 180.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - enum:
+          - 0    # Sensor Mounted Upright (default)
+          - 180  # Sensor Mounted Upside Down
+
+  ovti,mipi-tx-speed:
+    description:
+      Indication of MIPI transmission speed select, which is to control D-PHY
+      timing setting by adjusting MIPI clock voltage to improve the clock
+      driver capability.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - enum:
+          - 0    #  20MHz -  30MHz
+          - 1    #  30MHz -  50MHz
+          - 2    #  50MHz -  75MHz
+          - 3    #  75MHz - 100MHz
+          - 4    # 100MHz - 130MHz (suggested)
+          - 5    # Manual
+
+  # See ../video-interfaces.txt for details
+  port:
+    type: object
+    additionalProperties: false
+    description:
+      A node containing an output port node with an endpoint definition
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          data-lanes:
+            description: |-
+              The driver only supports 1-lane operation.
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              MIPI CSI-2 clock is non-continuous if this property is present,
+              otherwise it's continuous.
+
+          link-frequencies:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint64-array
+            description:
+              Allowed data bus frequencies. 39000000 Hz is supported by
+              the driver.
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - powerdown-gpios
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02a10: camera-sensor@3d {
+            compatible = "ovti,ov02a10";
+            reg = <0x3d>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&topckgen CLK_TOP_MUX_CAMTG>,
+                     <&topckgen CLK_TOP_UNIVP_192M_D8>;
+            clock-names = "eclk", "freq_mux";
+            clock-frequency = <24000000>;
+
+            rotation = <180>;
+            ovti,mipi-tx-speed = <3>;
+
+            dovdd-supply = <&mt6358_vcamio_reg>;
+            avdd-supply = <&mt6358_vcama1_reg>;
+            dvdd-supply = <&mt6358_vcn18_reg>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_HIGH>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <390000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index e64e5db..63a2335 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12389,6 +12389,13 @@ M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
+OMNIVISION OV02A10 SENSOR DRIVER
+M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-- 
2.9.2

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-09  8:06 [V8, 0/2] media: i2c: Add support for OV02A10 sensor Dongchun Zhu
  2020-05-09  8:06 ` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings Dongchun Zhu
@ 2020-05-09  8:06 ` Dongchun Zhu
  2020-05-11  8:51   ` Sakari Ailus
                     ` (2 more replies)
  1 sibling, 3 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-09  8:06 UTC (permalink / raw)
  To: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, sakari.ailus, drinkcat, tfiga, matthias.bgg,
	bingbu.cao
  Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu

Add a V4L2 sub-device driver for OV02A10 image sensor.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
 MAINTAINERS                 |    1 +
 drivers/media/i2c/Kconfig   |   13 +
 drivers/media/i2c/Makefile  |    1 +
 drivers/media/i2c/ov02a10.c | 1094 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1109 insertions(+)
 create mode 100644 drivers/media/i2c/ov02a10.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 63a2335..e7677c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12395,6 +12395,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+F:	drivers/media/i2c/ov02a10.c
 
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 125d596..d8572cd 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -655,6 +655,19 @@ config VIDEO_IMX355
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx355.
 
+config VIDEO_OV02A10
+	tristate "OmniVision OV02A10 sensor support"
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV02A10 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov02a10.
+
 config VIDEO_OV2640
 	tristate "OmniVision OV2640 sensor support"
 	depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 77bf7d0..6566dd9 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
 obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
 obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
 obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
+obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o
 obj-$(CONFIG_VIDEO_OV2640) += ov2640.o
 obj-$(CONFIG_VIDEO_OV2680) += ov2680.o
 obj-$(CONFIG_VIDEO_OV2685) += ov2685.o
diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c
new file mode 100644
index 0000000..778619e
--- /dev/null
+++ b/drivers/media/i2c/ov02a10.c
@@ -0,0 +1,1094 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-fwnode.h>
+
+#define CHIP_ID						0x2509
+#define OV02A10_REG_CHIP_ID_H				0x02
+#define OV02A10_REG_CHIP_ID_L				0x03
+#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
+
+/* Bit[1] vertical upside down */
+/* Bit[0] horizontal mirror */
+#define REG_MIRROR_FLIP_CONTROL				0x3f
+
+/* Orientation */
+#define REG_MIRROR_FLIP_ENABLE				0x03
+
+/* Bit[7] clock HS mode enable
+ * 0: Clock continue
+ * 1: Clock HS
+ * Bit[6:2] HS VOD adjust
+ * Bit[1:0] P VHI adjust
+ */
+#define REG_HS_MODE_BLC					0x9d
+
+#define CLOCK_HS_MODE_ENABLE				BIT(7)
+
+/* Bit[2:0] MIPI transmission speed select */
+#define TX_SPEED_AREA_SEL				0xa1
+
+#define REG_PAGE_SWITCH					0xfd
+#define REG_GLOBAL_EFFECTIVE				0x01
+#define REG_ENABLE					BIT(0)
+
+#define REG_SC_CTRL_MODE				0xac
+#define SC_CTRL_MODE_STANDBY				0x00
+#define SC_CTRL_MODE_STREAMING				0x01
+
+#define OV02A10_EXP_SHIFT				8
+#define OV02A10_REG_EXPOSURE_H				0x03
+#define OV02A10_REG_EXPOSURE_L				0x04
+#define	OV02A10_EXPOSURE_MIN				4
+#define OV02A10_EXPOSURE_MAX_MARGIN			4
+#define	OV02A10_EXPOSURE_STEP				1
+
+#define OV02A10_VTS_SHIFT				8
+#define OV02A10_REG_VTS_H				0x05
+#define OV02A10_REG_VTS_L				0x06
+#define OV02A10_VTS_MAX					0x209f
+#define OV02A10_VTS_MIN					0x04cf
+#define OV02A10_BASIC_LINE				1224
+
+#define OV02A10_REG_GAIN				0x24
+#define OV02A10_GAIN_MIN				0x10
+#define OV02A10_GAIN_MAX				0xf8
+#define OV02A10_GAIN_STEP				0x01
+#define OV02A10_GAIN_DEFAULT				0x40
+
+/* Test pattern control */
+#define OV02A10_REG_TEST_PATTERN			0xb6
+#define OV02A10_TEST_PATTERN_ENABLE			BIT(0)
+
+#define HZ_PER_MHZ					1000000L
+#define OV02A10_LINK_FREQ_390MHZ			(390 * HZ_PER_MHZ)
+#define OV02A10_ECLK_FREQ				(24 * HZ_PER_MHZ)
+#define OV02A10_DATA_LANES				1
+#define OV02A10_BITS_PER_SAMPLE				10
+
+static const char * const ov02a10_supply_names[] = {
+	"dovdd",	/* Digital I/O power */
+	"avdd",		/* Analog power */
+	"dvdd",		/* Digital core power */
+};
+
+#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names)
+
+struct ov02a10_reg {
+	u8 addr;
+	u8 val;
+};
+
+struct ov02a10_reg_list {
+	u32 num_of_regs;
+	const struct ov02a10_reg *regs;
+};
+
+struct ov02a10_mode {
+	u32 width;
+	u32 height;
+	u32 exp_def;
+	u32 hts_def;
+	u32 vts_def;
+	const struct ov02a10_reg_list reg_list;
+};
+
+struct ov02a10 {
+	u32			eclk_freq;
+	u32                     mipi_clock_tx_speed;
+
+	struct clk		*eclk;
+	struct gpio_desc	*pd_gpio;
+	struct gpio_desc	*n_rst_gpio;
+	struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES];
+
+	bool			streaming;
+	bool			upside_down;
+	bool			mipi_clock_tx_speed_select_enable;
+	bool			mipi_clock_hs_mode_enable;
+
+	/*
+	 * Serialize control access, get/set format, get selection
+	 * and start streaming.
+	 */
+	struct mutex		mutex;
+	struct v4l2_subdev	subdev;
+	struct media_pad	pad;
+	struct v4l2_ctrl	*anal_gain;
+	struct v4l2_ctrl	*exposure;
+	struct v4l2_ctrl	*hblank;
+	struct v4l2_ctrl	*vblank;
+	struct v4l2_ctrl	*test_pattern;
+	struct v4l2_mbus_framefmt	fmt;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	const struct ov02a10_mode *cur_mode;
+};
+
+static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct ov02a10, subdev);
+}
+
+/*
+ * eclk 24Mhz
+ * pclk 39Mhz
+ * linelength 934(0x3a6)
+ * framelength 1390(0x56E)
+ * grabwindow_width 1600
+ * grabwindow_height 1200
+ * max_framerate 30fps
+ * mipi_datarate per lane 780Mbps
+ */
+static const struct ov02a10_reg ov02a10_1600x1200_regs[] = {
+	{0xfd, 0x01},
+	{0xac, 0x00},
+	{0xfd, 0x00},
+	{0x2f, 0x29},
+	{0x34, 0x00},
+	{0x35, 0x21},
+	{0x30, 0x15},
+	{0x33, 0x01},
+	{0xfd, 0x01},
+	{0x44, 0x00},
+	{0x2a, 0x4c},
+	{0x2b, 0x1e},
+	{0x2c, 0x60},
+	{0x25, 0x11},
+	{0x03, 0x01},
+	{0x04, 0xae},
+	{0x09, 0x00},
+	{0x0a, 0x02},
+	{0x06, 0xa6},
+	{0x31, 0x00},
+	{0x24, 0x40},
+	{0x01, 0x01},
+	{0xfb, 0x73},
+	{0xfd, 0x01},
+	{0x16, 0x04},
+	{0x1c, 0x09},
+	{0x21, 0x42},
+	{0x12, 0x04},
+	{0x13, 0x10},
+	{0x11, 0x40},
+	{0x33, 0x81},
+	{0xd0, 0x00},
+	{0xd1, 0x01},
+	{0xd2, 0x00},
+	{0x50, 0x10},
+	{0x51, 0x23},
+	{0x52, 0x20},
+	{0x53, 0x10},
+	{0x54, 0x02},
+	{0x55, 0x20},
+	{0x56, 0x02},
+	{0x58, 0x48},
+	{0x5d, 0x15},
+	{0x5e, 0x05},
+	{0x66, 0x66},
+	{0x68, 0x68},
+	{0x6b, 0x00},
+	{0x6c, 0x00},
+	{0x6f, 0x40},
+	{0x70, 0x40},
+	{0x71, 0x0a},
+	{0x72, 0xf0},
+	{0x73, 0x10},
+	{0x75, 0x80},
+	{0x76, 0x10},
+	{0x84, 0x00},
+	{0x85, 0x10},
+	{0x86, 0x10},
+	{0x87, 0x00},
+	{0x8a, 0x22},
+	{0x8b, 0x22},
+	{0x19, 0xf1},
+	{0x29, 0x01},
+	{0xfd, 0x01},
+	{0x9d, 0x16},
+	{0xa0, 0x29},
+	{0xa1, 0x04},
+	{0xad, 0x62},
+	{0xae, 0x00},
+	{0xaf, 0x85},
+	{0xb1, 0x01},
+	{0x8e, 0x06},
+	{0x8f, 0x40},
+	{0x90, 0x04},
+	{0x91, 0xb0},
+	{0x45, 0x01},
+	{0x46, 0x00},
+	{0x47, 0x6c},
+	{0x48, 0x03},
+	{0x49, 0x8b},
+	{0x4a, 0x00},
+	{0x4b, 0x07},
+	{0x4c, 0x04},
+	{0x4d, 0xb7},
+	{0xf0, 0x40},
+	{0xf1, 0x40},
+	{0xf2, 0x40},
+	{0xf3, 0x40},
+	{0x3f, 0x00},
+	{0xfd, 0x01},
+	{0x05, 0x00},
+	{0x06, 0xa6},
+	{0xfd, 0x01},
+};
+
+static const char * const ov02a10_test_pattern_menu[] = {
+	"Disabled",
+	"Color Bar",
+};
+
+static const s64 link_freq_menu_items[] = {
+	OV02A10_LINK_FREQ_390MHZ,
+};
+
+static u64 to_pixel_rate(u32 f_index)
+{
+	u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES;
+
+	do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE);
+
+	return pixel_rate;
+}
+
+static const struct ov02a10_mode supported_modes[] = {
+	{
+		.width = 1600,
+		.height = 1200,
+		.exp_def = 0x01ae,
+		.hts_def = 0x03a6,
+		.vts_def = 0x056e,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs),
+			.regs = ov02a10_1600x1200_regs,
+		},
+	},
+};
+
+static int ov02a10_write_array(struct ov02a10 *ov02a10,
+			       const struct ov02a10_reg_list *r_list)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < r_list->num_of_regs; i++) {
+		ret = i2c_smbus_write_byte_data(client, r_list->regs[i].addr,
+						r_list->regs[i].val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
+			      unsigned char *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		return ret;
+
+	*val = (unsigned char)ret;
+
+	return 0;
+}
+
+static int ov02a10_mod_reg(struct ov02a10 *ov02a10, u8 reg, u8 mask, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	u8 readval;
+	int ret;
+
+	ret = ov02a10_read_smbus(ov02a10, reg, &readval);
+	if (ret)
+		return ret;
+
+	val = (readval & ~mask) | (val & mask);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static void ov02a10_fill_fmt(const struct ov02a10_mode *mode,
+			     struct v4l2_mbus_framefmt *fmt)
+{
+	fmt->width = mode->width;
+	fmt->height = mode->height;
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+static int ov02a10_set_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_pad_config *cfg,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
+
+	mutex_lock(&ov02a10->mutex);
+
+	if (ov02a10->streaming) {
+		mutex_unlock(&ov02a10->mutex);
+		return -EBUSY;
+	}
+
+	/* Only one sensor mode supported */
+	mbus_fmt->code = ov02a10->fmt.code;
+	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
+	ov02a10->fmt = fmt->format;
+
+	mutex_unlock(&ov02a10->mutex);
+
+	return 0;
+}
+
+static int ov02a10_get_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_pad_config *cfg,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
+
+	mutex_lock(&ov02a10->mutex);
+
+	fmt->format = ov02a10->fmt;
+	mbus_fmt->code = ov02a10->fmt.code;
+	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
+
+	mutex_unlock(&ov02a10->mutex);
+
+	return 0;
+}
+
+static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+
+	if (code->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	code->code = ov02a10->fmt.code;
+
+	return 0;
+}
+
+static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg,
+				    struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	fse->min_width  = supported_modes[fse->index].width;
+	fse->max_width  = supported_modes[fse->index].width;
+	fse->max_height = supported_modes[fse->index].height;
+	fse->min_height = supported_modes[fse->index].height;
+
+	return 0;
+}
+
+static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	u16 id;
+	u8 chip_id_h;
+	u8 chip_id_l;
+	int ret;
+
+	/* Check sensor revision */
+	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &chip_id_h);
+	if (ret)
+		return ret;
+
+	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &chip_id_l);
+	if (ret)
+		return ret;
+
+	id = OV02A10_ID(chip_id_h, chip_id_l);
+	if (id != CHIP_ID) {
+		dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id);
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev, "Detected OV%04X sensor\n", id);
+
+	return 0;
+}
+
+static int __maybe_unused ov02a10_power_on(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+	int ret;
+
+	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
+	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
+
+	ret = clk_prepare_enable(ov02a10->eclk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable eclk\n");
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable regulators\n");
+		goto disable_clk;
+	}
+	usleep_range(5000, 6000);
+
+	gpiod_set_value_cansleep(ov02a10->pd_gpio, 1);
+	usleep_range(5000, 6000);
+
+	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1);
+	usleep_range(5000, 6000);
+
+	ret = ov02a10_check_sensor_id(ov02a10);
+	if (ret)
+		goto disable_regulator;
+
+	return 0;
+
+disable_regulator:
+	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
+disable_clk:
+	clk_disable_unprepare(ov02a10->eclk);
+
+	return ret;
+}
+
+static int __maybe_unused ov02a10_power_off(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+
+	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
+	clk_disable_unprepare(ov02a10->eclk);
+	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
+	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
+
+	return 0;
+}
+
+static int __ov02a10_start_stream(struct ov02a10 *ov02a10)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	const struct ov02a10_reg_list *reg_list;
+	int ret;
+
+	/* Apply default values of current mode */
+	reg_list = &ov02a10->cur_mode->reg_list;
+	ret = ov02a10_write_array(ov02a10, reg_list);
+	if (ret)
+		return ret;
+
+	/* Apply customized values from user */
+	ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler);
+	if (ret)
+		return ret;
+
+	/* Set orientation to 180 degree */
+	if (ov02a10->upside_down) {
+		ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL,
+						REG_MIRROR_FLIP_ENABLE);
+		if (ret) {
+			dev_err(&client->dev, "failed to set orientation\n");
+			return ret;
+		}
+		ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
+						REG_ENABLE);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Set clock lane transmission mode according to DT property */
+	ret = ov02a10_mod_reg(ov02a10, REG_HS_MODE_BLC, CLOCK_HS_MODE_ENABLE,
+			      ov02a10->mipi_clock_hs_mode_enable ?
+			      CLOCK_HS_MODE_ENABLE : 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set mipi TX speed according to DT property */
+	if (ov02a10->mipi_clock_tx_speed_select_enable) {
+		ret = i2c_smbus_write_byte_data(client, TX_SPEED_AREA_SEL,
+						ov02a10->mipi_clock_tx_speed);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Set stream on register */
+	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
+					 SC_CTRL_MODE_STREAMING);
+}
+
+static int __ov02a10_stop_stream(struct ov02a10 *ov02a10)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+
+	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
+					 SC_CTRL_MODE_STANDBY);
+}
+
+static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg)
+{
+	struct v4l2_subdev_format fmt = {
+		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
+			     : V4L2_SUBDEV_FORMAT_ACTIVE,
+		.format = {
+			.width = 1600,
+			.height = 1200,
+		}
+	};
+
+	ov02a10_set_fmt(sd, cfg, &fmt);
+
+	return 0;
+}
+
+static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	int ret;
+
+	dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on);
+	mutex_lock(&ov02a10->mutex);
+
+	if (ov02a10->streaming == on)
+		goto unlock_and_return;
+
+	if (on) {
+		ret = pm_runtime_get_sync(&client->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(&client->dev);
+			goto unlock_and_return;
+		}
+
+		ret = __ov02a10_start_stream(ov02a10);
+		if (ret) {
+			__ov02a10_stop_stream(ov02a10);
+			ov02a10->streaming = !on;
+			goto err_rpm_put;
+		}
+	} else {
+		__ov02a10_stop_stream(ov02a10);
+		pm_runtime_put(&client->dev);
+	}
+
+	ov02a10->streaming = on;
+	mutex_unlock(&ov02a10->mutex);
+
+	return 0;
+
+err_rpm_put:
+	pm_runtime_put(&client->dev);
+unlock_and_return:
+	mutex_unlock(&ov02a10->mutex);
+
+	return ret;
+}
+
+static const struct dev_pm_ops ov02a10_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(ov02a10_power_off, ov02a10_power_on, NULL)
+};
+
+/*
+ * ov02a10_set_exposure - Function called when setting exposure time
+ * @priv: Pointer to device structure
+ * @val: Variable for exposure time, in the unit of micro-second
+ *
+ * Set exposure time based on input value.
+ *
+ * Return: 0 on success
+ */
+static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H,
+					val >> OV02A10_EXP_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, val);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
+					 REG_ENABLE);
+}
+
+static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, val);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
+					 REG_ENABLE);
+}
+
+static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	u32 vts = val + ov02a10->cur_mode->height - OV02A10_BASIC_LINE;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H,
+					vts >> OV02A10_VTS_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, vts);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
+					 REG_ENABLE);
+}
+
+static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	int ret;
+
+	if (pattern)
+		pattern = OV02A10_TEST_PATTERN_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN,
+					pattern);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
+					REG_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
+					 SC_CTRL_MODE_STREAMING);
+}
+
+static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ov02a10 *ov02a10 = container_of(ctrl->handler,
+					       struct ov02a10, ctrl_handler);
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	s64 max_expo;
+	int ret;
+
+	/* Propagate change of current control to all related controls */
+	if (ctrl->id == V4L2_CID_VBLANK) {
+		/* Update max exposure while meeting expected vblanking */
+		max_expo = ov02a10->cur_mode->height + ctrl->val -
+			   OV02A10_EXPOSURE_MAX_MARGIN;
+		__v4l2_ctrl_modify_range(ov02a10->exposure,
+					 ov02a10->exposure->minimum, max_expo,
+					 ov02a10->exposure->step,
+					 ov02a10->exposure->default_value);
+	}
+
+	/* V4L2 controls values will be applied only when power is already up */
+	if (!pm_runtime_get_if_in_use(&client->dev))
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		ret = ov02a10_set_exposure(ov02a10, ctrl->val);
+		break;
+	case V4L2_CID_ANALOGUE_GAIN:
+		ret = ov02a10_set_gain(ov02a10, ctrl->val);
+		break;
+	case V4L2_CID_VBLANK:
+		ret = ov02a10_set_vblank(ov02a10, ctrl->val);
+		break;
+	case V4L2_CID_TEST_PATTERN:
+		ret = ov02a10_set_test_pattern(ov02a10, ctrl->val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	};
+
+	pm_runtime_put(&client->dev);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_video_ops ov02a10_video_ops = {
+	.s_stream = ov02a10_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = {
+	.init_cfg = ov02a10_entity_init_cfg,
+	.enum_mbus_code = ov02a10_enum_mbus_code,
+	.enum_frame_size = ov02a10_enum_frame_sizes,
+	.get_fmt = ov02a10_get_fmt,
+	.set_fmt = ov02a10_set_fmt,
+};
+
+static const struct v4l2_subdev_ops ov02a10_subdev_ops = {
+	.video	= &ov02a10_video_ops,
+	.pad	= &ov02a10_pad_ops,
+};
+
+static const struct media_entity_operations ov02a10_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = {
+	.s_ctrl = ov02a10_set_ctrl,
+};
+
+static int ov02a10_initialize_controls(struct ov02a10 *ov02a10)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
+	const struct ov02a10_mode *mode;
+	struct v4l2_ctrl_handler *handler;
+	struct v4l2_ctrl *ctrl;
+	u64 exposure_max;
+	u32 pixel_rate, h_blank;
+	int ret;
+
+	handler = &ov02a10->ctrl_handler;
+	mode = ov02a10->cur_mode;
+	ret = v4l2_ctrl_handler_init(handler, 7);
+	if (ret)
+		return ret;
+
+	handler->lock = &ov02a10->mutex;
+
+	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
+				      link_freq_menu_items);
+	if (ctrl)
+		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	pixel_rate = to_pixel_rate(0);
+	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
+			  pixel_rate);
+
+	h_blank = mode->hts_def - mode->width;
+	ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
+					    h_blank, h_blank, 1, h_blank);
+	if (ov02a10->hblank)
+		ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
+					    V4L2_CID_VBLANK, mode->vts_def -
+					    mode->height,
+					    OV02A10_VTS_MAX - mode->height, 1,
+					    mode->vts_def - mode->height);
+
+	exposure_max = mode->vts_def - 4;
+	ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
+					      V4L2_CID_EXPOSURE,
+					      OV02A10_EXPOSURE_MIN,
+					      exposure_max,
+					      OV02A10_EXPOSURE_STEP,
+					      mode->exp_def);
+
+	ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
+					       V4L2_CID_ANALOGUE_GAIN,
+					       OV02A10_GAIN_MIN,
+					       OV02A10_GAIN_MAX,
+					       OV02A10_GAIN_STEP,
+					       OV02A10_GAIN_DEFAULT);
+
+	ov02a10->test_pattern =
+		v4l2_ctrl_new_std_menu_items(handler, &ov02a10_ctrl_ops,
+					     V4L2_CID_TEST_PATTERN,
+					     ARRAY_SIZE(ov02a10_test_pattern_menu) -
+					     1, 0, 0,
+					     ov02a10_test_pattern_menu);
+
+	if (handler->error) {
+		ret = handler->error;
+		dev_err(&client->dev, "failed to init controls(%d)\n", ret);
+		goto err_free_handler;
+	}
+
+	ov02a10->subdev.ctrl_handler = handler;
+
+	return 0;
+
+err_free_handler:
+	v4l2_ctrl_handler_free(handler);
+
+	return ret;
+}
+
+static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)
+{
+	struct fwnode_handle *ep;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	unsigned int i, j;
+	int ret;
+
+	if (!fwnode)
+		return -EINVAL;
+
+	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
+	if (!ep)
+		return -ENXIO;
+
+	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+	fwnode_handle_put(ep);
+	if (ret)
+		return ret;
+
+	/* Optional indication of mipi clock lane mode */
+	if (bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK)
+		ov02a10->mipi_clock_hs_mode_enable = true;
+
+	if (!bus_cfg.nr_of_link_frequencies) {
+		dev_err(dev, "no link frequencies defined");
+		ret = -EINVAL;
+		goto check_hwcfg_error;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
+		for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
+			if (link_freq_menu_items[i] ==
+				bus_cfg.link_frequencies[j])
+				break;
+		}
+
+		if (j == bus_cfg.nr_of_link_frequencies) {
+			dev_err(dev, "no link frequency %lld supported",
+				link_freq_menu_items[i]);
+			ret = -EINVAL;
+			goto check_hwcfg_error;
+		}
+	}
+
+check_hwcfg_error:
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+
+	return ret;
+}
+
+static int ov02a10_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct ov02a10 *ov02a10;
+	unsigned int rotation;
+	unsigned int clock_lane_tx_speed;
+	unsigned int i;
+	int ret;
+
+	ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL);
+	if (!ov02a10)
+		return -ENOMEM;
+
+	ret = ov02a10_check_hwcfg(dev, ov02a10);
+	if (ret) {
+		dev_err(dev, "failed to check HW configuration: %d", ret);
+		return ret;
+	}
+
+	v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops);
+	ov02a10->upside_down = false;
+	ov02a10->mipi_clock_tx_speed_select_enable = false;
+	ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
+
+	/* Optional indication of physical rotation of sensor */
+	ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", &rotation);
+	if (!ret) {
+		if (rotation == 180) {
+			ov02a10->upside_down = true;
+			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
+		}
+	}
+
+	/* Optional indication of mipi TX speed */
+	ret = fwnode_property_read_u32(dev_fwnode(dev), "ovti,mipi-tx-speed",
+				       &clock_lane_tx_speed);
+
+	if (!ret) {
+		ov02a10->mipi_clock_tx_speed_select_enable = true;
+		ov02a10->mipi_clock_tx_speed = clock_lane_tx_speed;
+	}
+
+	/* Get system clock (eclk) */
+	ov02a10->eclk = devm_clk_get(dev, "eclk");
+	if (IS_ERR(ov02a10->eclk)) {
+		ret = PTR_ERR(ov02a10->eclk);
+		dev_err(dev, "failed to get eclk %d\n", ret);
+		return ret;
+	}
+
+	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
+				       &ov02a10->eclk_freq);
+	if (ret) {
+		dev_err(dev, "failed to get eclk frequency\n");
+		return ret;
+	}
+
+	ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq);
+	if (ret) {
+		dev_err(dev, "failed to set eclk frequency (24MHz)\n");
+		return ret;
+	}
+
+	if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) {
+		dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n",
+			 ov02a10->eclk_freq, OV02A10_ECLK_FREQ);
+		return -EINVAL;
+	}
+
+	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(ov02a10->pd_gpio)) {
+		ret = PTR_ERR(ov02a10->pd_gpio);
+		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
+		return ret;
+	}
+
+	ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ov02a10->n_rst_gpio)) {
+		ret = PTR_ERR(ov02a10->n_rst_gpio);
+		dev_err(dev, "failed to get reset-gpios %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < OV02A10_NUM_SUPPLIES; i++)
+		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, OV02A10_NUM_SUPPLIES,
+				      ov02a10->supplies);
+	if (ret) {
+		dev_err(dev, "failed to get regulators\n");
+		return ret;
+	}
+
+	mutex_init(&ov02a10->mutex);
+	ov02a10->cur_mode = &supported_modes[0];
+	ret = ov02a10_initialize_controls(ov02a10);
+	if (ret) {
+		dev_err(dev, "failed to initialize controls\n");
+		goto err_destroy_mutex;
+	}
+
+	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
+	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
+	if (ret < 0) {
+		dev_err(dev, "failed to init entity pads: %d", ret);
+		goto err_free_handler;
+	}
+
+	pm_runtime_enable(dev);
+	if (!pm_runtime_enabled(dev)) {
+		ret = ov02a10_power_on(dev);
+		if (ret < 0) {
+			dev_err(dev, "failed to power on: %d\n", ret);
+			goto err_clean_entity;
+		}
+	}
+
+	ret = v4l2_async_register_subdev(&ov02a10->subdev);
+	if (ret) {
+		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
+		goto err_clean_entity;
+	}
+
+	return 0;
+
+err_clean_entity:
+	media_entity_cleanup(&ov02a10->subdev.entity);
+err_free_handler:
+	v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler);
+err_destroy_mutex:
+	mutex_destroy(&ov02a10->mutex);
+
+	return ret;
+}
+
+static int ov02a10_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov02a10 *ov02a10 = to_ov02a10(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	pm_runtime_disable(&client->dev);
+	if (!pm_runtime_status_suspended(&client->dev))
+		ov02a10_power_off(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	mutex_destroy(&ov02a10->mutex);
+
+	return 0;
+}
+
+static const struct of_device_id ov02a10_of_match[] = {
+	{ .compatible = "ovti,ov02a10" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ov02a10_of_match);
+
+static struct i2c_driver ov02a10_i2c_driver = {
+	.driver = {
+		.name = "ov02a10",
+		.pm = &ov02a10_pm_ops,
+		.of_match_table = ov02a10_of_match,
+	},
+	.probe_new	= &ov02a10_probe,
+	.remove		= &ov02a10_remove,
+};
+
+module_i2c_driver(ov02a10_i2c_driver);
+
+MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>");
+MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver");
+MODULE_LICENSE("GPL v2");
+
-- 
2.9.2

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
@ 2020-05-11  8:51   ` Sakari Ailus
  2020-05-11 11:52     ` Dongchun Zhu
  2020-05-11  9:33   ` Andy Shevchenko
  2020-05-21 19:32   ` Tomasz Figa
  2 siblings, 1 reply; 16+ messages in thread
From: Sakari Ailus @ 2020-05-11  8:51 UTC (permalink / raw)
  To: Dongchun Zhu
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, drinkcat, tfiga, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang

Hi Dongchun,

A few small matters. Feel free to address these in a follow-up patch.

On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  MAINTAINERS                 |    1 +
>  drivers/media/i2c/Kconfig   |   13 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/ov02a10.c | 1094 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 1109 insertions(+)
>  create mode 100644 drivers/media/i2c/ov02a10.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 63a2335..e7677c5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12395,6 +12395,7 @@ L:	linux-media@vger.kernel.org
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> +F:	drivers/media/i2c/ov02a10.c
>  
>  OMNIVISION OV13858 SENSOR DRIVER
>  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 125d596..d8572cd 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -655,6 +655,19 @@ config VIDEO_IMX355
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called imx355.
>  
> +config VIDEO_OV02A10
> +	tristate "OmniVision OV02A10 sensor support"
> +	depends on I2C && VIDEO_V4L2
> +	select MEDIA_CONTROLLER
> +	select VIDEO_V4L2_SUBDEV_API
> +	select V4L2_FWNODE
> +	help
> +	  This is a Video4Linux2 sensor driver for the OmniVision
> +	  OV02A10 camera.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ov02a10.
> +
>  config VIDEO_OV2640
>  	tristate "OmniVision OV2640 sensor support"
>  	depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 77bf7d0..6566dd9 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
>  obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
>  obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
>  obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
> +obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o
>  obj-$(CONFIG_VIDEO_OV2640) += ov2640.o
>  obj-$(CONFIG_VIDEO_OV2680) += ov2680.o
>  obj-$(CONFIG_VIDEO_OV2685) += ov2685.o
> diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c
> new file mode 100644
> index 0000000..778619e
> --- /dev/null
> +++ b/drivers/media/i2c/ov02a10.c
> @@ -0,0 +1,1094 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2020 MediaTek Inc.
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#define CHIP_ID						0x2509
> +#define OV02A10_REG_CHIP_ID_H				0x02
> +#define OV02A10_REG_CHIP_ID_L				0x03
> +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> +
> +/* Bit[1] vertical upside down */
> +/* Bit[0] horizontal mirror */
> +#define REG_MIRROR_FLIP_CONTROL				0x3f
> +
> +/* Orientation */
> +#define REG_MIRROR_FLIP_ENABLE				0x03
> +
> +/* Bit[7] clock HS mode enable
> + * 0: Clock continue
> + * 1: Clock HS
> + * Bit[6:2] HS VOD adjust
> + * Bit[1:0] P VHI adjust
> + */
> +#define REG_HS_MODE_BLC					0x9d
> +
> +#define CLOCK_HS_MODE_ENABLE				BIT(7)
> +
> +/* Bit[2:0] MIPI transmission speed select */
> +#define TX_SPEED_AREA_SEL				0xa1
> +
> +#define REG_PAGE_SWITCH					0xfd
> +#define REG_GLOBAL_EFFECTIVE				0x01
> +#define REG_ENABLE					BIT(0)
> +
> +#define REG_SC_CTRL_MODE				0xac
> +#define SC_CTRL_MODE_STANDBY				0x00
> +#define SC_CTRL_MODE_STREAMING				0x01
> +
> +#define OV02A10_EXP_SHIFT				8
> +#define OV02A10_REG_EXPOSURE_H				0x03
> +#define OV02A10_REG_EXPOSURE_L				0x04
> +#define	OV02A10_EXPOSURE_MIN				4
> +#define OV02A10_EXPOSURE_MAX_MARGIN			4
> +#define	OV02A10_EXPOSURE_STEP				1
> +
> +#define OV02A10_VTS_SHIFT				8
> +#define OV02A10_REG_VTS_H				0x05
> +#define OV02A10_REG_VTS_L				0x06
> +#define OV02A10_VTS_MAX					0x209f
> +#define OV02A10_VTS_MIN					0x04cf
> +#define OV02A10_BASIC_LINE				1224
> +
> +#define OV02A10_REG_GAIN				0x24
> +#define OV02A10_GAIN_MIN				0x10
> +#define OV02A10_GAIN_MAX				0xf8
> +#define OV02A10_GAIN_STEP				0x01
> +#define OV02A10_GAIN_DEFAULT				0x40
> +
> +/* Test pattern control */
> +#define OV02A10_REG_TEST_PATTERN			0xb6
> +#define OV02A10_TEST_PATTERN_ENABLE			BIT(0)
> +
> +#define HZ_PER_MHZ					1000000L
> +#define OV02A10_LINK_FREQ_390MHZ			(390 * HZ_PER_MHZ)
> +#define OV02A10_ECLK_FREQ				(24 * HZ_PER_MHZ)
> +#define OV02A10_DATA_LANES				1
> +#define OV02A10_BITS_PER_SAMPLE				10
> +
> +static const char * const ov02a10_supply_names[] = {
> +	"dovdd",	/* Digital I/O power */
> +	"avdd",		/* Analog power */
> +	"dvdd",		/* Digital core power */
> +};
> +
> +#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names)

Please use ARRAY_SIZE() directly.

> +
> +struct ov02a10_reg {
> +	u8 addr;
> +	u8 val;
> +};
> +
> +struct ov02a10_reg_list {
> +	u32 num_of_regs;
> +	const struct ov02a10_reg *regs;
> +};
> +
> +struct ov02a10_mode {
> +	u32 width;
> +	u32 height;
> +	u32 exp_def;
> +	u32 hts_def;
> +	u32 vts_def;
> +	const struct ov02a10_reg_list reg_list;
> +};
> +
> +struct ov02a10 {
> +	u32			eclk_freq;
> +	u32                     mipi_clock_tx_speed;
> +
> +	struct clk		*eclk;
> +	struct gpio_desc	*pd_gpio;
> +	struct gpio_desc	*n_rst_gpio;
> +	struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES];
> +
> +	bool			streaming;
> +	bool			upside_down;
> +	bool			mipi_clock_tx_speed_select_enable;
> +	bool			mipi_clock_hs_mode_enable;
> +
> +	/*
> +	 * Serialize control access, get/set format, get selection
> +	 * and start streaming.
> +	 */
> +	struct mutex		mutex;
> +	struct v4l2_subdev	subdev;
> +	struct media_pad	pad;
> +	struct v4l2_ctrl	*anal_gain;

again? analogue_gain?

> +	struct v4l2_ctrl	*exposure;
> +	struct v4l2_ctrl	*hblank;
> +	struct v4l2_ctrl	*vblank;
> +	struct v4l2_ctrl	*test_pattern;
> +	struct v4l2_mbus_framefmt	fmt;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +
> +	const struct ov02a10_mode *cur_mode;
> +};
> +
> +static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct ov02a10, subdev);
> +}
> +
> +/*
> + * eclk 24Mhz
> + * pclk 39Mhz
> + * linelength 934(0x3a6)
> + * framelength 1390(0x56E)
> + * grabwindow_width 1600
> + * grabwindow_height 1200
> + * max_framerate 30fps
> + * mipi_datarate per lane 780Mbps
> + */
> +static const struct ov02a10_reg ov02a10_1600x1200_regs[] = {
> +	{0xfd, 0x01},
> +	{0xac, 0x00},
> +	{0xfd, 0x00},
> +	{0x2f, 0x29},
> +	{0x34, 0x00},
> +	{0x35, 0x21},
> +	{0x30, 0x15},
> +	{0x33, 0x01},
> +	{0xfd, 0x01},
> +	{0x44, 0x00},
> +	{0x2a, 0x4c},
> +	{0x2b, 0x1e},
> +	{0x2c, 0x60},
> +	{0x25, 0x11},
> +	{0x03, 0x01},
> +	{0x04, 0xae},
> +	{0x09, 0x00},
> +	{0x0a, 0x02},
> +	{0x06, 0xa6},
> +	{0x31, 0x00},
> +	{0x24, 0x40},
> +	{0x01, 0x01},
> +	{0xfb, 0x73},
> +	{0xfd, 0x01},
> +	{0x16, 0x04},
> +	{0x1c, 0x09},
> +	{0x21, 0x42},
> +	{0x12, 0x04},
> +	{0x13, 0x10},
> +	{0x11, 0x40},
> +	{0x33, 0x81},
> +	{0xd0, 0x00},
> +	{0xd1, 0x01},
> +	{0xd2, 0x00},
> +	{0x50, 0x10},
> +	{0x51, 0x23},
> +	{0x52, 0x20},
> +	{0x53, 0x10},
> +	{0x54, 0x02},
> +	{0x55, 0x20},
> +	{0x56, 0x02},
> +	{0x58, 0x48},
> +	{0x5d, 0x15},
> +	{0x5e, 0x05},
> +	{0x66, 0x66},
> +	{0x68, 0x68},
> +	{0x6b, 0x00},
> +	{0x6c, 0x00},
> +	{0x6f, 0x40},
> +	{0x70, 0x40},
> +	{0x71, 0x0a},
> +	{0x72, 0xf0},
> +	{0x73, 0x10},
> +	{0x75, 0x80},
> +	{0x76, 0x10},
> +	{0x84, 0x00},
> +	{0x85, 0x10},
> +	{0x86, 0x10},
> +	{0x87, 0x00},
> +	{0x8a, 0x22},
> +	{0x8b, 0x22},
> +	{0x19, 0xf1},
> +	{0x29, 0x01},
> +	{0xfd, 0x01},
> +	{0x9d, 0x16},
> +	{0xa0, 0x29},
> +	{0xa1, 0x04},
> +	{0xad, 0x62},
> +	{0xae, 0x00},
> +	{0xaf, 0x85},
> +	{0xb1, 0x01},
> +	{0x8e, 0x06},
> +	{0x8f, 0x40},
> +	{0x90, 0x04},
> +	{0x91, 0xb0},
> +	{0x45, 0x01},
> +	{0x46, 0x00},
> +	{0x47, 0x6c},
> +	{0x48, 0x03},
> +	{0x49, 0x8b},
> +	{0x4a, 0x00},
> +	{0x4b, 0x07},
> +	{0x4c, 0x04},
> +	{0x4d, 0xb7},
> +	{0xf0, 0x40},
> +	{0xf1, 0x40},
> +	{0xf2, 0x40},
> +	{0xf3, 0x40},
> +	{0x3f, 0x00},
> +	{0xfd, 0x01},
> +	{0x05, 0x00},
> +	{0x06, 0xa6},
> +	{0xfd, 0x01},
> +};
> +
> +static const char * const ov02a10_test_pattern_menu[] = {
> +	"Disabled",
> +	"Color Bar",
> +};
> +
> +static const s64 link_freq_menu_items[] = {
> +	OV02A10_LINK_FREQ_390MHZ,
> +};
> +
> +static u64 to_pixel_rate(u32 f_index)
> +{
> +	u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES;
> +
> +	do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE);
> +
> +	return pixel_rate;
> +}
> +
> +static const struct ov02a10_mode supported_modes[] = {
> +	{
> +		.width = 1600,
> +		.height = 1200,
> +		.exp_def = 0x01ae,
> +		.hts_def = 0x03a6,
> +		.vts_def = 0x056e,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs),
> +			.regs = ov02a10_1600x1200_regs,
> +		},
> +	},
> +};
> +
> +static int ov02a10_write_array(struct ov02a10 *ov02a10,
> +			       const struct ov02a10_reg_list *r_list)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < r_list->num_of_regs; i++) {
> +		ret = i2c_smbus_write_byte_data(client, r_list->regs[i].addr,
> +						r_list->regs[i].val);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> +			      unsigned char *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(client, reg);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = (unsigned char)ret;
> +
> +	return 0;
> +}
> +
> +static int ov02a10_mod_reg(struct ov02a10 *ov02a10, u8 reg, u8 mask, u8 val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	u8 readval;
> +	int ret;
> +
> +	ret = ov02a10_read_smbus(ov02a10, reg, &readval);
> +	if (ret)
> +		return ret;
> +
> +	val = (readval & ~mask) | (val & mask);
> +
> +	return i2c_smbus_write_byte_data(client, reg, val);
> +}
> +
> +static void ov02a10_fill_fmt(const struct ov02a10_mode *mode,
> +			     struct v4l2_mbus_framefmt *fmt)
> +{
> +	fmt->width = mode->width;
> +	fmt->height = mode->height;
> +	fmt->field = V4L2_FIELD_NONE;
> +}
> +
> +static int ov02a10_set_fmt(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_pad_config *cfg,
> +			   struct v4l2_subdev_format *fmt)
> +{
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> +
> +	mutex_lock(&ov02a10->mutex);
> +
> +	if (ov02a10->streaming) {
> +		mutex_unlock(&ov02a10->mutex);
> +		return -EBUSY;
> +	}
> +
> +	/* Only one sensor mode supported */
> +	mbus_fmt->code = ov02a10->fmt.code;
> +	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
> +	ov02a10->fmt = fmt->format;
> +
> +	mutex_unlock(&ov02a10->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov02a10_get_fmt(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_pad_config *cfg,
> +			   struct v4l2_subdev_format *fmt)
> +{
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> +
> +	mutex_lock(&ov02a10->mutex);
> +
> +	fmt->format = ov02a10->fmt;
> +	mbus_fmt->code = ov02a10->fmt.code;
> +	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
> +
> +	mutex_unlock(&ov02a10->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_pad_config *cfg,
> +				  struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +
> +	if (code->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	code->code = ov02a10->fmt.code;
> +
> +	return 0;
> +}
> +
> +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_pad_config *cfg,
> +				    struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	fse->min_width  = supported_modes[fse->index].width;
> +	fse->max_width  = supported_modes[fse->index].width;
> +	fse->max_height = supported_modes[fse->index].height;
> +	fse->min_height = supported_modes[fse->index].height;
> +
> +	return 0;
> +}
> +
> +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	u16 id;
> +	u8 chip_id_h;
> +	u8 chip_id_l;
> +	int ret;
> +
> +	/* Check sensor revision */
> +	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &chip_id_h);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &chip_id_l);
> +	if (ret)
> +		return ret;
> +
> +	id = OV02A10_ID(chip_id_h, chip_id_l);
> +	if (id != CHIP_ID) {
> +		dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id);
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(&client->dev, "Detected OV%04X sensor\n", id);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ov02a10_power_on(struct device *dev)

__maybe_unused is unnecessary. Same on ov02a10_power_off() below.

> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +	int ret;
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> +
> +	ret = clk_prepare_enable(ov02a10->eclk);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable eclk\n");
> +		return ret;
> +	}
> +
> +	ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable regulators\n");
> +		goto disable_clk;
> +	}
> +	usleep_range(5000, 6000);
> +
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 1);
> +	usleep_range(5000, 6000);
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1);
> +	usleep_range(5000, 6000);
> +
> +	ret = ov02a10_check_sensor_id(ov02a10);
> +	if (ret)
> +		goto disable_regulator;
> +
> +	return 0;
> +
> +disable_regulator:
> +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> +disable_clk:
> +	clk_disable_unprepare(ov02a10->eclk);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ov02a10_power_off(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> +	clk_disable_unprepare(ov02a10->eclk);
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> +
> +	return 0;
> +}
> +
> +static int __ov02a10_start_stream(struct ov02a10 *ov02a10)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	const struct ov02a10_reg_list *reg_list;
> +	int ret;
> +
> +	/* Apply default values of current mode */
> +	reg_list = &ov02a10->cur_mode->reg_list;
> +	ret = ov02a10_write_array(ov02a10, reg_list);
> +	if (ret)
> +		return ret;
> +
> +	/* Apply customized values from user */
> +	ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler);
> +	if (ret)
> +		return ret;
> +
> +	/* Set orientation to 180 degree */
> +	if (ov02a10->upside_down) {
> +		ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL,
> +						REG_MIRROR_FLIP_ENABLE);
> +		if (ret) {
> +			dev_err(&client->dev, "failed to set orientation\n");
> +			return ret;
> +		}
> +		ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +						REG_ENABLE);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	/* Set clock lane transmission mode according to DT property */
> +	ret = ov02a10_mod_reg(ov02a10, REG_HS_MODE_BLC, CLOCK_HS_MODE_ENABLE,
> +			      ov02a10->mipi_clock_hs_mode_enable ?
> +			      CLOCK_HS_MODE_ENABLE : 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Set mipi TX speed according to DT property */
> +	if (ov02a10->mipi_clock_tx_speed_select_enable) {
> +		ret = i2c_smbus_write_byte_data(client, TX_SPEED_AREA_SEL,
> +						ov02a10->mipi_clock_tx_speed);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	/* Set stream on register */
> +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> +					 SC_CTRL_MODE_STREAMING);
> +}
> +
> +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +
> +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> +					 SC_CTRL_MODE_STANDBY);
> +}
> +
> +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg)
> +{
> +	struct v4l2_subdev_format fmt = {
> +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> +		.format = {
> +			.width = 1600,
> +			.height = 1200,
> +		}
> +	};
> +
> +	ov02a10_set_fmt(sd, cfg, &fmt);
> +
> +	return 0;
> +}
> +
> +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> +{
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on);

Please remove.

> +	mutex_lock(&ov02a10->mutex);
> +
> +	if (ov02a10->streaming == on)
> +		goto unlock_and_return;
> +
> +	if (on) {
> +		ret = pm_runtime_get_sync(&client->dev);
> +		if (ret < 0) {
> +			pm_runtime_put_noidle(&client->dev);
> +			goto unlock_and_return;
> +		}
> +
> +		ret = __ov02a10_start_stream(ov02a10);
> +		if (ret) {
> +			__ov02a10_stop_stream(ov02a10);
> +			ov02a10->streaming = !on;
> +			goto err_rpm_put;
> +		}
> +	} else {
> +		__ov02a10_stop_stream(ov02a10);
> +		pm_runtime_put(&client->dev);
> +	}
> +
> +	ov02a10->streaming = on;
> +	mutex_unlock(&ov02a10->mutex);
> +
> +	return 0;
> +
> +err_rpm_put:
> +	pm_runtime_put(&client->dev);
> +unlock_and_return:
> +	mutex_unlock(&ov02a10->mutex);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops ov02a10_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(ov02a10_power_off, ov02a10_power_on, NULL)
> +};
> +
> +/*
> + * ov02a10_set_exposure - Function called when setting exposure time
> + * @priv: Pointer to device structure
> + * @val: Variable for exposure time, in the unit of micro-second
> + *
> + * Set exposure time based on input value.
> + *
> + * Return: 0 on success
> + */
> +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H,
> +					val >> OV02A10_EXP_SHIFT);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);
> +}
> +
> +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);
> +}
> +
> +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	u32 vts = val + ov02a10->cur_mode->height - OV02A10_BASIC_LINE;
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H,
> +					vts >> OV02A10_VTS_SHIFT);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, vts);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);
> +}
> +
> +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	if (pattern)
> +		pattern = OV02A10_TEST_PATTERN_ENABLE;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN,
> +					pattern);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> +					 SC_CTRL_MODE_STREAMING);
> +}
> +
> +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ov02a10 *ov02a10 = container_of(ctrl->handler,
> +					       struct ov02a10, ctrl_handler);
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	s64 max_expo;
> +	int ret;
> +
> +	/* Propagate change of current control to all related controls */
> +	if (ctrl->id == V4L2_CID_VBLANK) {
> +		/* Update max exposure while meeting expected vblanking */
> +		max_expo = ov02a10->cur_mode->height + ctrl->val -
> +			   OV02A10_EXPOSURE_MAX_MARGIN;
> +		__v4l2_ctrl_modify_range(ov02a10->exposure,
> +					 ov02a10->exposure->minimum, max_expo,
> +					 ov02a10->exposure->step,
> +					 ov02a10->exposure->default_value);
> +	}
> +
> +	/* V4L2 controls values will be applied only when power is already up */
> +	if (!pm_runtime_get_if_in_use(&client->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_EXPOSURE:
> +		ret = ov02a10_set_exposure(ov02a10, ctrl->val);
> +		break;
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = ov02a10_set_gain(ov02a10, ctrl->val);
> +		break;
> +	case V4L2_CID_VBLANK:
> +		ret = ov02a10_set_vblank(ov02a10, ctrl->val);
> +		break;
> +	case V4L2_CID_TEST_PATTERN:
> +		ret = ov02a10_set_test_pattern(ov02a10, ctrl->val);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	};
> +
> +	pm_runtime_put(&client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_subdev_video_ops ov02a10_video_ops = {
> +	.s_stream = ov02a10_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = {
> +	.init_cfg = ov02a10_entity_init_cfg,
> +	.enum_mbus_code = ov02a10_enum_mbus_code,
> +	.enum_frame_size = ov02a10_enum_frame_sizes,
> +	.get_fmt = ov02a10_get_fmt,
> +	.set_fmt = ov02a10_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops ov02a10_subdev_ops = {
> +	.video	= &ov02a10_video_ops,
> +	.pad	= &ov02a10_pad_ops,
> +};
> +
> +static const struct media_entity_operations ov02a10_subdev_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = {
> +	.s_ctrl = ov02a10_set_ctrl,
> +};
> +
> +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	const struct ov02a10_mode *mode;
> +	struct v4l2_ctrl_handler *handler;
> +	struct v4l2_ctrl *ctrl;
> +	u64 exposure_max;
> +	u32 pixel_rate, h_blank;
> +	int ret;
> +
> +	handler = &ov02a10->ctrl_handler;
> +	mode = ov02a10->cur_mode;
> +	ret = v4l2_ctrl_handler_init(handler, 7);
> +	if (ret)
> +		return ret;
> +
> +	handler->lock = &ov02a10->mutex;
> +
> +	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
> +				      link_freq_menu_items);
> +	if (ctrl)
> +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	pixel_rate = to_pixel_rate(0);
> +	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
> +			  pixel_rate);
> +
> +	h_blank = mode->hts_def - mode->width;
> +	ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> +					    h_blank, h_blank, 1, h_blank);
> +	if (ov02a10->hblank)
> +		ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					    V4L2_CID_VBLANK, mode->vts_def -
> +					    mode->height,
> +					    OV02A10_VTS_MAX - mode->height, 1,
> +					    mode->vts_def - mode->height);
> +
> +	exposure_max = mode->vts_def - 4;
> +	ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					      V4L2_CID_EXPOSURE,
> +					      OV02A10_EXPOSURE_MIN,
> +					      exposure_max,
> +					      OV02A10_EXPOSURE_STEP,
> +					      mode->exp_def);
> +
> +	ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					       V4L2_CID_ANALOGUE_GAIN,
> +					       OV02A10_GAIN_MIN,
> +					       OV02A10_GAIN_MAX,
> +					       OV02A10_GAIN_STEP,
> +					       OV02A10_GAIN_DEFAULT);
> +
> +	ov02a10->test_pattern =
> +		v4l2_ctrl_new_std_menu_items(handler, &ov02a10_ctrl_ops,
> +					     V4L2_CID_TEST_PATTERN,
> +					     ARRAY_SIZE(ov02a10_test_pattern_menu) -
> +					     1, 0, 0,
> +					     ov02a10_test_pattern_menu);
> +
> +	if (handler->error) {
> +		ret = handler->error;
> +		dev_err(&client->dev, "failed to init controls(%d)\n", ret);
> +		goto err_free_handler;
> +	}
> +
> +	ov02a10->subdev.ctrl_handler = handler;
> +
> +	return 0;
> +
> +err_free_handler:
> +	v4l2_ctrl_handler_free(handler);
> +
> +	return ret;
> +}
> +
> +static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)
> +{
> +	struct fwnode_handle *ep;
> +	struct fwnode_handle *fwnode = dev_fwnode(dev);
> +	struct v4l2_fwnode_endpoint bus_cfg = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	unsigned int i, j;
> +	int ret;
> +
> +	if (!fwnode)
> +		return -EINVAL;
> +
> +	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> +	if (!ep)
> +		return -ENXIO;
> +
> +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> +	fwnode_handle_put(ep);
> +	if (ret)
> +		return ret;
> +
> +	/* Optional indication of mipi clock lane mode */
> +	if (bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK)
> +		ov02a10->mipi_clock_hs_mode_enable = true;
> +
> +	if (!bus_cfg.nr_of_link_frequencies) {
> +		dev_err(dev, "no link frequencies defined");
> +		ret = -EINVAL;
> +		goto check_hwcfg_error;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
> +		for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
> +			if (link_freq_menu_items[i] ==
> +				bus_cfg.link_frequencies[j])
> +				break;
> +		}
> +
> +		if (j == bus_cfg.nr_of_link_frequencies) {
> +			dev_err(dev, "no link frequency %lld supported",
> +				link_freq_menu_items[i]);
> +			ret = -EINVAL;
> +			goto check_hwcfg_error;
> +		}
> +	}
> +
> +check_hwcfg_error:
> +	v4l2_fwnode_endpoint_free(&bus_cfg);
> +
> +	return ret;
> +}
> +
> +static int ov02a10_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct ov02a10 *ov02a10;
> +	unsigned int rotation;
> +	unsigned int clock_lane_tx_speed;
> +	unsigned int i;
> +	int ret;
> +
> +	ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL);
> +	if (!ov02a10)
> +		return -ENOMEM;
> +
> +	ret = ov02a10_check_hwcfg(dev, ov02a10);
> +	if (ret) {
> +		dev_err(dev, "failed to check HW configuration: %d", ret);
> +		return ret;
> +	}
> +
> +	v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops);
> +	ov02a10->upside_down = false;
> +	ov02a10->mipi_clock_tx_speed_select_enable = false;
> +	ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +
> +	/* Optional indication of physical rotation of sensor */
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", &rotation);
> +	if (!ret) {
> +		if (rotation == 180) {
> +			ov02a10->upside_down = true;
> +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> +		}
> +	}
> +
> +	/* Optional indication of mipi TX speed */
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "ovti,mipi-tx-speed",
> +				       &clock_lane_tx_speed);
> +
> +	if (!ret) {
> +		ov02a10->mipi_clock_tx_speed_select_enable = true;
> +		ov02a10->mipi_clock_tx_speed = clock_lane_tx_speed;
> +	}
> +
> +	/* Get system clock (eclk) */
> +	ov02a10->eclk = devm_clk_get(dev, "eclk");
> +	if (IS_ERR(ov02a10->eclk)) {
> +		ret = PTR_ERR(ov02a10->eclk);
> +		dev_err(dev, "failed to get eclk %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
> +				       &ov02a10->eclk_freq);
> +	if (ret) {
> +		dev_err(dev, "failed to get eclk frequency\n");
> +		return ret;
> +	}
> +
> +	ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq);
> +	if (ret) {
> +		dev_err(dev, "failed to set eclk frequency (24MHz)\n");
> +		return ret;
> +	}
> +
> +	if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) {
> +		dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n",
> +			 ov02a10->eclk_freq, OV02A10_ECLK_FREQ);
> +		return -EINVAL;
> +	}
> +
> +	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ov02a10->pd_gpio)) {
> +		ret = PTR_ERR(ov02a10->pd_gpio);
> +		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(ov02a10->n_rst_gpio)) {
> +		ret = PTR_ERR(ov02a10->n_rst_gpio);
> +		dev_err(dev, "failed to get reset-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < OV02A10_NUM_SUPPLIES; i++)
> +		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
> +
> +	ret = devm_regulator_bulk_get(dev, OV02A10_NUM_SUPPLIES,
> +				      ov02a10->supplies);
> +	if (ret) {
> +		dev_err(dev, "failed to get regulators\n");
> +		return ret;
> +	}
> +
> +	mutex_init(&ov02a10->mutex);
> +	ov02a10->cur_mode = &supported_modes[0];
> +	ret = ov02a10_initialize_controls(ov02a10);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize controls\n");
> +		goto err_destroy_mutex;
> +	}
> +
> +	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
> +	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to init entity pads: %d", ret);
> +		goto err_free_handler;
> +	}
> +
> +	pm_runtime_enable(dev);
> +	if (!pm_runtime_enabled(dev)) {
> +		ret = ov02a10_power_on(dev);
> +		if (ret < 0) {
> +			dev_err(dev, "failed to power on: %d\n", ret);
> +			goto err_clean_entity;
> +		}
> +	}
> +
> +	ret = v4l2_async_register_subdev(&ov02a10->subdev);
> +	if (ret) {
> +		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
> +		goto err_clean_entity;
> +	}
> +
> +	return 0;
> +
> +err_clean_entity:
> +	media_entity_cleanup(&ov02a10->subdev.entity);
> +err_free_handler:
> +	v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler);
> +err_destroy_mutex:
> +	mutex_destroy(&ov02a10->mutex);
> +
> +	return ret;
> +}
> +
> +static int ov02a10_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +	pm_runtime_disable(&client->dev);
> +	if (!pm_runtime_status_suspended(&client->dev))
> +		ov02a10_power_off(&client->dev);
> +	pm_runtime_set_suspended(&client->dev);
> +	mutex_destroy(&ov02a10->mutex);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ov02a10_of_match[] = {
> +	{ .compatible = "ovti,ov02a10" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, ov02a10_of_match);
> +
> +static struct i2c_driver ov02a10_i2c_driver = {
> +	.driver = {
> +		.name = "ov02a10",
> +		.pm = &ov02a10_pm_ops,
> +		.of_match_table = ov02a10_of_match,
> +	},
> +	.probe_new	= &ov02a10_probe,
> +	.remove		= &ov02a10_remove,
> +};
> +
> +module_i2c_driver(ov02a10_i2c_driver);
> +
> +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>");
> +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver");
> +MODULE_LICENSE("GPL v2");
> +

-- 
Kind regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
  2020-05-11  8:51   ` Sakari Ailus
@ 2020-05-11  9:33   ` Andy Shevchenko
  2020-05-11 12:06     ` Dongchun Zhu
  2020-05-21 19:32   ` Tomasz Figa
  2 siblings, 1 reply; 16+ messages in thread
From: Andy Shevchenko @ 2020-05-11  9:33 UTC (permalink / raw)
  To: Dongchun Zhu
  Cc: linus.walleij, bgolaszewski, mchehab, robh+dt, mark.rutland,
	sakari.ailus, drinkcat, tfiga, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang

On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> Add a V4L2 sub-device driver for OV02A10 image sensor.

...

> +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))

How often do you use this macro?

...

> +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> +			      unsigned char *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(client, reg);

> +

Extra blank line.

> +	if (ret < 0)
> +		return ret;
> +
> +	*val = (unsigned char)ret;
> +
> +	return 0;
> +}

...

> +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg)
> +{
> +	struct v4l2_subdev_format fmt = {

> +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> +			     : V4L2_SUBDEV_FORMAT_ACTIVE,

I think it would be fine to have it on one line.

> +		.format = {
> +			.width = 1600,
> +			.height = 1200,
> +		}
> +	};
> +
> +	ov02a10_set_fmt(sd, cfg, &fmt);
> +
> +	return 0;
> +}

...

> +	if (!ret) {
> +		if (rotation == 180) {

if (a) {
	if (b) {
		...
	}
}

==

if (a && b) {
	...
}

> +			ov02a10->upside_down = true;
> +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> +		}
> +	}

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-11  8:51   ` Sakari Ailus
@ 2020-05-11 11:52     ` Dongchun Zhu
  0 siblings, 0 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-11 11:52 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, drinkcat, tfiga, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang

Hi Sakari,

Thanks for your timely review.

On Mon, 2020-05-11 at 11:51 +0300, Sakari Ailus wrote:
> Hi Dongchun,
> 
> A few small matters. Feel free to address these in a follow-up patch.
> 
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> > 
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  MAINTAINERS                 |    1 +
> >  drivers/media/i2c/Kconfig   |   13 +
> >  drivers/media/i2c/Makefile  |    1 +
> >  drivers/media/i2c/ov02a10.c | 1094 +++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 1109 insertions(+)
> >  create mode 100644 drivers/media/i2c/ov02a10.c
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 63a2335..e7677c5 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -12395,6 +12395,7 @@ L:	linux-media@vger.kernel.org
> >  S:	Maintained
> >  T:	git git://linuxtv.org/media_tree.git
> >  F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > +F:	drivers/media/i2c/ov02a10.c
> >  
> >  OMNIVISION OV13858 SENSOR DRIVER
> >  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 125d596..d8572cd 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -655,6 +655,19 @@ config VIDEO_IMX355
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called imx355.
> >  
> > +config VIDEO_OV02A10
> > +	tristate "OmniVision OV02A10 sensor support"
> > +	depends on I2C && VIDEO_V4L2
> > +	select MEDIA_CONTROLLER
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	select V4L2_FWNODE
> > +	help
> > +	  This is a Video4Linux2 sensor driver for the OmniVision
> > +	  OV02A10 camera.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called ov02a10.
> > +
> >  config VIDEO_OV2640
> >  	tristate "OmniVision OV2640 sensor support"
> >  	depends on VIDEO_V4L2 && I2C
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 77bf7d0..6566dd9 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
> >  obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
> >  obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
> >  obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
> > +obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o
> >  obj-$(CONFIG_VIDEO_OV2640) += ov2640.o
> >  obj-$(CONFIG_VIDEO_OV2680) += ov2680.o
> >  obj-$(CONFIG_VIDEO_OV2685) += ov2685.o
> > diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c
> > new file mode 100644
> > index 0000000..778619e
> > --- /dev/null
> > +++ b/drivers/media/i2c/ov02a10.c
> > @@ -0,0 +1,1094 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2020 MediaTek Inc.
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-subdev.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#define CHIP_ID						0x2509
> > +#define OV02A10_REG_CHIP_ID_H				0x02
> > +#define OV02A10_REG_CHIP_ID_L				0x03
> > +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> > +
> > +/* Bit[1] vertical upside down */
> > +/* Bit[0] horizontal mirror */
> > +#define REG_MIRROR_FLIP_CONTROL				0x3f
> > +
> > +/* Orientation */
> > +#define REG_MIRROR_FLIP_ENABLE				0x03
> > +
> > +/* Bit[7] clock HS mode enable
> > + * 0: Clock continue
> > + * 1: Clock HS
> > + * Bit[6:2] HS VOD adjust
> > + * Bit[1:0] P VHI adjust
> > + */
> > +#define REG_HS_MODE_BLC					0x9d
> > +
> > +#define CLOCK_HS_MODE_ENABLE				BIT(7)
> > +
> > +/* Bit[2:0] MIPI transmission speed select */
> > +#define TX_SPEED_AREA_SEL				0xa1
> > +
> > +#define REG_PAGE_SWITCH					0xfd
> > +#define REG_GLOBAL_EFFECTIVE				0x01
> > +#define REG_ENABLE					BIT(0)
> > +
> > +#define REG_SC_CTRL_MODE				0xac
> > +#define SC_CTRL_MODE_STANDBY				0x00
> > +#define SC_CTRL_MODE_STREAMING				0x01
> > +
> > +#define OV02A10_EXP_SHIFT				8
> > +#define OV02A10_REG_EXPOSURE_H				0x03
> > +#define OV02A10_REG_EXPOSURE_L				0x04
> > +#define	OV02A10_EXPOSURE_MIN				4
> > +#define OV02A10_EXPOSURE_MAX_MARGIN			4
> > +#define	OV02A10_EXPOSURE_STEP				1
> > +
> > +#define OV02A10_VTS_SHIFT				8
> > +#define OV02A10_REG_VTS_H				0x05
> > +#define OV02A10_REG_VTS_L				0x06
> > +#define OV02A10_VTS_MAX					0x209f
> > +#define OV02A10_VTS_MIN					0x04cf
> > +#define OV02A10_BASIC_LINE				1224
> > +
> > +#define OV02A10_REG_GAIN				0x24
> > +#define OV02A10_GAIN_MIN				0x10
> > +#define OV02A10_GAIN_MAX				0xf8
> > +#define OV02A10_GAIN_STEP				0x01
> > +#define OV02A10_GAIN_DEFAULT				0x40
> > +
> > +/* Test pattern control */
> > +#define OV02A10_REG_TEST_PATTERN			0xb6
> > +#define OV02A10_TEST_PATTERN_ENABLE			BIT(0)
> > +
> > +#define HZ_PER_MHZ					1000000L
> > +#define OV02A10_LINK_FREQ_390MHZ			(390 * HZ_PER_MHZ)
> > +#define OV02A10_ECLK_FREQ				(24 * HZ_PER_MHZ)
> > +#define OV02A10_DATA_LANES				1
> > +#define OV02A10_BITS_PER_SAMPLE				10
> > +
> > +static const char * const ov02a10_supply_names[] = {
> > +	"dovdd",	/* Digital I/O power */
> > +	"avdd",		/* Analog power */
> > +	"dvdd",		/* Digital core power */
> > +};
> > +
> > +#define OV02A10_NUM_SUPPLIES ARRAY_SIZE(ov02a10_supply_names)
> 
> Please use ARRAY_SIZE() directly.
> 

Copy that.
Fixed in next release.

> > +
> > +struct ov02a10_reg {
> > +	u8 addr;
> > +	u8 val;
> > +};
> > +
> > +struct ov02a10_reg_list {
> > +	u32 num_of_regs;
> > +	const struct ov02a10_reg *regs;
> > +};
> > +
> > +struct ov02a10_mode {
> > +	u32 width;
> > +	u32 height;
> > +	u32 exp_def;
> > +	u32 hts_def;
> > +	u32 vts_def;
> > +	const struct ov02a10_reg_list reg_list;
> > +};
> > +
> > +struct ov02a10 {
> > +	u32			eclk_freq;
> > +	u32                     mipi_clock_tx_speed;
> > +
> > +	struct clk		*eclk;
> > +	struct gpio_desc	*pd_gpio;
> > +	struct gpio_desc	*n_rst_gpio;
> > +	struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES];
> > +
> > +	bool			streaming;
> > +	bool			upside_down;
> > +	bool			mipi_clock_tx_speed_select_enable;
> > +	bool			mipi_clock_hs_mode_enable;
> > +
> > +	/*
> > +	 * Serialize control access, get/set format, get selection
> > +	 * and start streaming.
> > +	 */
> > +	struct mutex		mutex;
> > +	struct v4l2_subdev	subdev;
> > +	struct media_pad	pad;
> > +	struct v4l2_ctrl	*anal_gain;
> 
> again? analogue_gain?
> 

Yeah, sensor analogue gain, as OV2685 does.

> > +	struct v4l2_ctrl	*exposure;
> > +	struct v4l2_ctrl	*hblank;
> > +	struct v4l2_ctrl	*vblank;
> > +	struct v4l2_ctrl	*test_pattern;
> > +	struct v4l2_mbus_framefmt	fmt;
> > +	struct v4l2_ctrl_handler ctrl_handler;
> > +
> > +	const struct ov02a10_mode *cur_mode;
> > +};
> > +
> > +static inline struct ov02a10 *to_ov02a10(struct v4l2_subdev *sd)
> > +{
> > +	return container_of(sd, struct ov02a10, subdev);
> > +}
> > +
> > +/*
> > + * eclk 24Mhz
> > + * pclk 39Mhz
> > + * linelength 934(0x3a6)
> > + * framelength 1390(0x56E)
> > + * grabwindow_width 1600
> > + * grabwindow_height 1200
> > + * max_framerate 30fps
> > + * mipi_datarate per lane 780Mbps
> > + */
> > +static const struct ov02a10_reg ov02a10_1600x1200_regs[] = {
> > +	{0xfd, 0x01},
> > +	{0xac, 0x00},
> > +	{0xfd, 0x00},
> > +	{0x2f, 0x29},
> > +	{0x34, 0x00},
> > +	{0x35, 0x21},
> > +	{0x30, 0x15},
> > +	{0x33, 0x01},
> > +	{0xfd, 0x01},
> > +	{0x44, 0x00},
> > +	{0x2a, 0x4c},
> > +	{0x2b, 0x1e},
> > +	{0x2c, 0x60},
> > +	{0x25, 0x11},
> > +	{0x03, 0x01},
> > +	{0x04, 0xae},
> > +	{0x09, 0x00},
> > +	{0x0a, 0x02},
> > +	{0x06, 0xa6},
> > +	{0x31, 0x00},
> > +	{0x24, 0x40},
> > +	{0x01, 0x01},
> > +	{0xfb, 0x73},
> > +	{0xfd, 0x01},
> > +	{0x16, 0x04},
> > +	{0x1c, 0x09},
> > +	{0x21, 0x42},
> > +	{0x12, 0x04},
> > +	{0x13, 0x10},
> > +	{0x11, 0x40},
> > +	{0x33, 0x81},
> > +	{0xd0, 0x00},
> > +	{0xd1, 0x01},
> > +	{0xd2, 0x00},
> > +	{0x50, 0x10},
> > +	{0x51, 0x23},
> > +	{0x52, 0x20},
> > +	{0x53, 0x10},
> > +	{0x54, 0x02},
> > +	{0x55, 0x20},
> > +	{0x56, 0x02},
> > +	{0x58, 0x48},
> > +	{0x5d, 0x15},
> > +	{0x5e, 0x05},
> > +	{0x66, 0x66},
> > +	{0x68, 0x68},
> > +	{0x6b, 0x00},
> > +	{0x6c, 0x00},
> > +	{0x6f, 0x40},
> > +	{0x70, 0x40},
> > +	{0x71, 0x0a},
> > +	{0x72, 0xf0},
> > +	{0x73, 0x10},
> > +	{0x75, 0x80},
> > +	{0x76, 0x10},
> > +	{0x84, 0x00},
> > +	{0x85, 0x10},
> > +	{0x86, 0x10},
> > +	{0x87, 0x00},
> > +	{0x8a, 0x22},
> > +	{0x8b, 0x22},
> > +	{0x19, 0xf1},
> > +	{0x29, 0x01},
> > +	{0xfd, 0x01},
> > +	{0x9d, 0x16},
> > +	{0xa0, 0x29},
> > +	{0xa1, 0x04},
> > +	{0xad, 0x62},
> > +	{0xae, 0x00},
> > +	{0xaf, 0x85},
> > +	{0xb1, 0x01},
> > +	{0x8e, 0x06},
> > +	{0x8f, 0x40},
> > +	{0x90, 0x04},
> > +	{0x91, 0xb0},
> > +	{0x45, 0x01},
> > +	{0x46, 0x00},
> > +	{0x47, 0x6c},
> > +	{0x48, 0x03},
> > +	{0x49, 0x8b},
> > +	{0x4a, 0x00},
> > +	{0x4b, 0x07},
> > +	{0x4c, 0x04},
> > +	{0x4d, 0xb7},
> > +	{0xf0, 0x40},
> > +	{0xf1, 0x40},
> > +	{0xf2, 0x40},
> > +	{0xf3, 0x40},
> > +	{0x3f, 0x00},
> > +	{0xfd, 0x01},
> > +	{0x05, 0x00},
> > +	{0x06, 0xa6},
> > +	{0xfd, 0x01},
> > +};
> > +
> > +static const char * const ov02a10_test_pattern_menu[] = {
> > +	"Disabled",
> > +	"Color Bar",
> > +};
> > +
> > +static const s64 link_freq_menu_items[] = {
> > +	OV02A10_LINK_FREQ_390MHZ,
> > +};
> > +
> > +static u64 to_pixel_rate(u32 f_index)
> > +{
> > +	u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV02A10_DATA_LANES;
> > +
> > +	do_div(pixel_rate, OV02A10_BITS_PER_SAMPLE);
> > +
> > +	return pixel_rate;
> > +}
> > +
> > +static const struct ov02a10_mode supported_modes[] = {
> > +	{
> > +		.width = 1600,
> > +		.height = 1200,
> > +		.exp_def = 0x01ae,
> > +		.hts_def = 0x03a6,
> > +		.vts_def = 0x056e,
> > +		.reg_list = {
> > +			.num_of_regs = ARRAY_SIZE(ov02a10_1600x1200_regs),
> > +			.regs = ov02a10_1600x1200_regs,
> > +		},
> > +	},
> > +};
> > +
> > +static int ov02a10_write_array(struct ov02a10 *ov02a10,
> > +			       const struct ov02a10_reg_list *r_list)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	for (i = 0; i < r_list->num_of_regs; i++) {
> > +		ret = i2c_smbus_write_byte_data(client, r_list->regs[i].addr,
> > +						r_list->regs[i].val);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> > +
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_mod_reg(struct ov02a10 *ov02a10, u8 reg, u8 mask, u8 val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	u8 readval;
> > +	int ret;
> > +
> > +	ret = ov02a10_read_smbus(ov02a10, reg, &readval);
> > +	if (ret)
> > +		return ret;
> > +
> > +	val = (readval & ~mask) | (val & mask);
> > +
> > +	return i2c_smbus_write_byte_data(client, reg, val);
> > +}
> > +
> > +static void ov02a10_fill_fmt(const struct ov02a10_mode *mode,
> > +			     struct v4l2_mbus_framefmt *fmt)
> > +{
> > +	fmt->width = mode->width;
> > +	fmt->height = mode->height;
> > +	fmt->field = V4L2_FIELD_NONE;
> > +}
> > +
> > +static int ov02a10_set_fmt(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_pad_config *cfg,
> > +			   struct v4l2_subdev_format *fmt)
> > +{
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> > +
> > +	mutex_lock(&ov02a10->mutex);
> > +
> > +	if (ov02a10->streaming) {
> > +		mutex_unlock(&ov02a10->mutex);
> > +		return -EBUSY;
> > +	}
> > +
> > +	/* Only one sensor mode supported */
> > +	mbus_fmt->code = ov02a10->fmt.code;
> > +	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
> > +	ov02a10->fmt = fmt->format;
> > +
> > +	mutex_unlock(&ov02a10->mutex);
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_get_fmt(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_pad_config *cfg,
> > +			   struct v4l2_subdev_format *fmt)
> > +{
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +	struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> > +
> > +	mutex_lock(&ov02a10->mutex);
> > +
> > +	fmt->format = ov02a10->fmt;
> > +	mbus_fmt->code = ov02a10->fmt.code;
> > +	ov02a10_fill_fmt(ov02a10->cur_mode, mbus_fmt);
> > +
> > +	mutex_unlock(&ov02a10->mutex);
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_enum_mbus_code(struct v4l2_subdev *sd,
> > +				  struct v4l2_subdev_pad_config *cfg,
> > +				  struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +
> > +	if (code->index >= ARRAY_SIZE(supported_modes))
> > +		return -EINVAL;
> > +
> > +	code->code = ov02a10->fmt.code;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_enum_frame_sizes(struct v4l2_subdev *sd,
> > +				    struct v4l2_subdev_pad_config *cfg,
> > +				    struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > +	if (fse->index >= ARRAY_SIZE(supported_modes))
> > +		return -EINVAL;
> > +
> > +	fse->min_width  = supported_modes[fse->index].width;
> > +	fse->max_width  = supported_modes[fse->index].width;
> > +	fse->max_height = supported_modes[fse->index].height;
> > +	fse->min_height = supported_modes[fse->index].height;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_check_sensor_id(struct ov02a10 *ov02a10)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	u16 id;
> > +	u8 chip_id_h;
> > +	u8 chip_id_l;
> > +	int ret;
> > +
> > +	/* Check sensor revision */
> > +	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_H, &chip_id_h);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = ov02a10_read_smbus(ov02a10, OV02A10_REG_CHIP_ID_L, &chip_id_l);
> > +	if (ret)
> > +		return ret;
> > +
> > +	id = OV02A10_ID(chip_id_h, chip_id_l);
> > +	if (id != CHIP_ID) {
> > +		dev_err(&client->dev, "Unexpected sensor id(%04x)\n", id);
> > +		return -EINVAL;
> > +	}
> > +
> > +	dev_dbg(&client->dev, "Detected OV%04X sensor\n", id);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused ov02a10_power_on(struct device *dev)
> 
> __maybe_unused is unnecessary. Same on ov02a10_power_off() below.
> 

Got it.
__maybe_unused would be removed in next release.

> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +	int ret;
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> > +
> > +	ret = clk_prepare_enable(ov02a10->eclk);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to enable eclk\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to enable regulators\n");
> > +		goto disable_clk;
> > +	}
> > +	usleep_range(5000, 6000);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 1);
> > +	usleep_range(5000, 6000);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1);
> > +	usleep_range(5000, 6000);
> > +
> > +	ret = ov02a10_check_sensor_id(ov02a10);
> > +	if (ret)
> > +		goto disable_regulator;
> > +
> > +	return 0;
> > +
> > +disable_regulator:
> > +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> > +disable_clk:
> > +	clk_disable_unprepare(ov02a10->eclk);
> > +
> > +	return ret;
> > +}
> > +
> > +static int __maybe_unused ov02a10_power_off(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> > +	clk_disable_unprepare(ov02a10->eclk);
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> > +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __ov02a10_start_stream(struct ov02a10 *ov02a10)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	const struct ov02a10_reg_list *reg_list;
> > +	int ret;
> > +
> > +	/* Apply default values of current mode */
> > +	reg_list = &ov02a10->cur_mode->reg_list;
> > +	ret = ov02a10_write_array(ov02a10, reg_list);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Apply customized values from user */
> > +	ret = __v4l2_ctrl_handler_setup(ov02a10->subdev.ctrl_handler);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Set orientation to 180 degree */
> > +	if (ov02a10->upside_down) {
> > +		ret = i2c_smbus_write_byte_data(client, REG_MIRROR_FLIP_CONTROL,
> > +						REG_MIRROR_FLIP_ENABLE);
> > +		if (ret) {
> > +			dev_err(&client->dev, "failed to set orientation\n");
> > +			return ret;
> > +		}
> > +		ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +						REG_ENABLE);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +
> > +	/* Set clock lane transmission mode according to DT property */
> > +	ret = ov02a10_mod_reg(ov02a10, REG_HS_MODE_BLC, CLOCK_HS_MODE_ENABLE,
> > +			      ov02a10->mipi_clock_hs_mode_enable ?
> > +			      CLOCK_HS_MODE_ENABLE : 0);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	/* Set mipi TX speed according to DT property */
> > +	if (ov02a10->mipi_clock_tx_speed_select_enable) {
> > +		ret = i2c_smbus_write_byte_data(client, TX_SPEED_AREA_SEL,
> > +						ov02a10->mipi_clock_tx_speed);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +
> > +	/* Set stream on register */
> > +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> > +					 SC_CTRL_MODE_STREAMING);
> > +}
> > +
> > +static int __ov02a10_stop_stream(struct ov02a10 *ov02a10)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> > +					 SC_CTRL_MODE_STANDBY);
> > +}
> > +
> > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = {
> > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> > +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> > +		.format = {
> > +			.width = 1600,
> > +			.height = 1200,
> > +		}
> > +	};
> > +
> > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> > +{
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	dev_dbg(&client->dev, "ov02a10 s_stream (%d)\n", on);
> 
> Please remove.
> 

Fixed in next release.

> > +	mutex_lock(&ov02a10->mutex);
> > +
> > +	if (ov02a10->streaming == on)
> > +		goto unlock_and_return;
> > +
> > +	if (on) {
> > +		ret = pm_runtime_get_sync(&client->dev);
> > +		if (ret < 0) {
> > +			pm_runtime_put_noidle(&client->dev);
> > +			goto unlock_and_return;
> > +		}
> > +
> > +		ret = __ov02a10_start_stream(ov02a10);
> > +		if (ret) {
> > +			__ov02a10_stop_stream(ov02a10);
> > +			ov02a10->streaming = !on;
> > +			goto err_rpm_put;
> > +		}
> > +	} else {
> > +		__ov02a10_stop_stream(ov02a10);
> > +		pm_runtime_put(&client->dev);
> > +	}
> > +
> > +	ov02a10->streaming = on;
> > +	mutex_unlock(&ov02a10->mutex);
> > +
> > +	return 0;
> > +
> > +err_rpm_put:
> > +	pm_runtime_put(&client->dev);
> > +unlock_and_return:
> > +	mutex_unlock(&ov02a10->mutex);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct dev_pm_ops ov02a10_pm_ops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > +				pm_runtime_force_resume)
> > +	SET_RUNTIME_PM_OPS(ov02a10_power_off, ov02a10_power_on, NULL)
> > +};
> > +
> > +/*
> > + * ov02a10_set_exposure - Function called when setting exposure time
> > + * @priv: Pointer to device structure
> > + * @val: Variable for exposure time, in the unit of micro-second
> > + *
> > + * Set exposure time based on input value.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H,
> > +					val >> OV02A10_EXP_SHIFT);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> > +}
> > +
> > +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> > +}
> > +
> > +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	u32 vts = val + ov02a10->cur_mode->height - OV02A10_BASIC_LINE;
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H,
> > +					vts >> OV02A10_VTS_SHIFT);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, vts);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> > +}
> > +
> > +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	if (pattern)
> > +		pattern = OV02A10_TEST_PATTERN_ENABLE;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_TEST_PATTERN,
> > +					pattern);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_SC_CTRL_MODE,
> > +					 SC_CTRL_MODE_STREAMING);
> > +}
> > +
> > +static int ov02a10_set_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +	struct ov02a10 *ov02a10 = container_of(ctrl->handler,
> > +					       struct ov02a10, ctrl_handler);
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	s64 max_expo;
> > +	int ret;
> > +
> > +	/* Propagate change of current control to all related controls */
> > +	if (ctrl->id == V4L2_CID_VBLANK) {
> > +		/* Update max exposure while meeting expected vblanking */
> > +		max_expo = ov02a10->cur_mode->height + ctrl->val -
> > +			   OV02A10_EXPOSURE_MAX_MARGIN;
> > +		__v4l2_ctrl_modify_range(ov02a10->exposure,
> > +					 ov02a10->exposure->minimum, max_expo,
> > +					 ov02a10->exposure->step,
> > +					 ov02a10->exposure->default_value);
> > +	}
> > +
> > +	/* V4L2 controls values will be applied only when power is already up */
> > +	if (!pm_runtime_get_if_in_use(&client->dev))
> > +		return 0;
> > +
> > +	switch (ctrl->id) {
> > +	case V4L2_CID_EXPOSURE:
> > +		ret = ov02a10_set_exposure(ov02a10, ctrl->val);
> > +		break;
> > +	case V4L2_CID_ANALOGUE_GAIN:
> > +		ret = ov02a10_set_gain(ov02a10, ctrl->val);
> > +		break;
> > +	case V4L2_CID_VBLANK:
> > +		ret = ov02a10_set_vblank(ov02a10, ctrl->val);
> > +		break;
> > +	case V4L2_CID_TEST_PATTERN:
> > +		ret = ov02a10_set_test_pattern(ov02a10, ctrl->val);
> > +		break;
> > +	default:
> > +		ret = -EINVAL;
> > +		break;
> > +	};
> > +
> > +	pm_runtime_put(&client->dev);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops ov02a10_video_ops = {
> > +	.s_stream = ov02a10_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops ov02a10_pad_ops = {
> > +	.init_cfg = ov02a10_entity_init_cfg,
> > +	.enum_mbus_code = ov02a10_enum_mbus_code,
> > +	.enum_frame_size = ov02a10_enum_frame_sizes,
> > +	.get_fmt = ov02a10_get_fmt,
> > +	.set_fmt = ov02a10_set_fmt,
> > +};
> > +
> > +static const struct v4l2_subdev_ops ov02a10_subdev_ops = {
> > +	.video	= &ov02a10_video_ops,
> > +	.pad	= &ov02a10_pad_ops,
> > +};
> > +
> > +static const struct media_entity_operations ov02a10_subdev_entity_ops = {
> > +	.link_validate = v4l2_subdev_link_validate,
> > +};
> > +
> > +static const struct v4l2_ctrl_ops ov02a10_ctrl_ops = {
> > +	.s_ctrl = ov02a10_set_ctrl,
> > +};
> > +
> > +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	const struct ov02a10_mode *mode;
> > +	struct v4l2_ctrl_handler *handler;
> > +	struct v4l2_ctrl *ctrl;
> > +	u64 exposure_max;
> > +	u32 pixel_rate, h_blank;
> > +	int ret;
> > +
> > +	handler = &ov02a10->ctrl_handler;
> > +	mode = ov02a10->cur_mode;
> > +	ret = v4l2_ctrl_handler_init(handler, 7);
> > +	if (ret)
> > +		return ret;
> > +
> > +	handler->lock = &ov02a10->mutex;
> > +
> > +	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
> > +				      link_freq_menu_items);
> > +	if (ctrl)
> > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	pixel_rate = to_pixel_rate(0);
> > +	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
> > +			  pixel_rate);
> > +
> > +	h_blank = mode->hts_def - mode->width;
> > +	ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> > +					    h_blank, h_blank, 1, h_blank);
> > +	if (ov02a10->hblank)
> > +		ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					    V4L2_CID_VBLANK, mode->vts_def -
> > +					    mode->height,
> > +					    OV02A10_VTS_MAX - mode->height, 1,
> > +					    mode->vts_def - mode->height);
> > +
> > +	exposure_max = mode->vts_def - 4;
> > +	ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					      V4L2_CID_EXPOSURE,
> > +					      OV02A10_EXPOSURE_MIN,
> > +					      exposure_max,
> > +					      OV02A10_EXPOSURE_STEP,
> > +					      mode->exp_def);
> > +
> > +	ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					       V4L2_CID_ANALOGUE_GAIN,
> > +					       OV02A10_GAIN_MIN,
> > +					       OV02A10_GAIN_MAX,
> > +					       OV02A10_GAIN_STEP,
> > +					       OV02A10_GAIN_DEFAULT);
> > +
> > +	ov02a10->test_pattern =
> > +		v4l2_ctrl_new_std_menu_items(handler, &ov02a10_ctrl_ops,
> > +					     V4L2_CID_TEST_PATTERN,
> > +					     ARRAY_SIZE(ov02a10_test_pattern_menu) -
> > +					     1, 0, 0,
> > +					     ov02a10_test_pattern_menu);
> > +
> > +	if (handler->error) {
> > +		ret = handler->error;
> > +		dev_err(&client->dev, "failed to init controls(%d)\n", ret);
> > +		goto err_free_handler;
> > +	}
> > +
> > +	ov02a10->subdev.ctrl_handler = handler;
> > +
> > +	return 0;
> > +
> > +err_free_handler:
> > +	v4l2_ctrl_handler_free(handler);
> > +
> > +	return ret;
> > +}
> > +
> > +static int ov02a10_check_hwcfg(struct device *dev, struct ov02a10 *ov02a10)
> > +{
> > +	struct fwnode_handle *ep;
> > +	struct fwnode_handle *fwnode = dev_fwnode(dev);
> > +	struct v4l2_fwnode_endpoint bus_cfg = {
> > +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> > +	};
> > +	unsigned int i, j;
> > +	int ret;
> > +
> > +	if (!fwnode)
> > +		return -EINVAL;
> > +
> > +	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> > +	if (!ep)
> > +		return -ENXIO;
> > +
> > +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> > +	fwnode_handle_put(ep);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Optional indication of mipi clock lane mode */
> > +	if (bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK)
> > +		ov02a10->mipi_clock_hs_mode_enable = true;
> > +
> > +	if (!bus_cfg.nr_of_link_frequencies) {
> > +		dev_err(dev, "no link frequencies defined");
> > +		ret = -EINVAL;
> > +		goto check_hwcfg_error;
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
> > +		for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
> > +			if (link_freq_menu_items[i] ==
> > +				bus_cfg.link_frequencies[j])
> > +				break;
> > +		}
> > +
> > +		if (j == bus_cfg.nr_of_link_frequencies) {
> > +			dev_err(dev, "no link frequency %lld supported",
> > +				link_freq_menu_items[i]);
> > +			ret = -EINVAL;
> > +			goto check_hwcfg_error;
> > +		}
> > +	}
> > +
> > +check_hwcfg_error:
> > +	v4l2_fwnode_endpoint_free(&bus_cfg);
> > +
> > +	return ret;
> > +}
> > +
> > +static int ov02a10_probe(struct i2c_client *client)
> > +{
> > +	struct device *dev = &client->dev;
> > +	struct ov02a10 *ov02a10;
> > +	unsigned int rotation;
> > +	unsigned int clock_lane_tx_speed;
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	ov02a10 = devm_kzalloc(dev, sizeof(*ov02a10), GFP_KERNEL);
> > +	if (!ov02a10)
> > +		return -ENOMEM;
> > +
> > +	ret = ov02a10_check_hwcfg(dev, ov02a10);
> > +	if (ret) {
> > +		dev_err(dev, "failed to check HW configuration: %d", ret);
> > +		return ret;
> > +	}
> > +
> > +	v4l2_i2c_subdev_init(&ov02a10->subdev, client, &ov02a10_subdev_ops);
> > +	ov02a10->upside_down = false;
> > +	ov02a10->mipi_clock_tx_speed_select_enable = false;
> > +	ov02a10->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> > +
> > +	/* Optional indication of physical rotation of sensor */
> > +	ret = fwnode_property_read_u32(dev_fwnode(dev), "rotation", &rotation);
> > +	if (!ret) {
> > +		if (rotation == 180) {
> > +			ov02a10->upside_down = true;
> > +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +		}
> > +	}
> > +
> > +	/* Optional indication of mipi TX speed */
> > +	ret = fwnode_property_read_u32(dev_fwnode(dev), "ovti,mipi-tx-speed",
> > +				       &clock_lane_tx_speed);
> > +
> > +	if (!ret) {
> > +		ov02a10->mipi_clock_tx_speed_select_enable = true;
> > +		ov02a10->mipi_clock_tx_speed = clock_lane_tx_speed;
> > +	}
> > +
> > +	/* Get system clock (eclk) */
> > +	ov02a10->eclk = devm_clk_get(dev, "eclk");
> > +	if (IS_ERR(ov02a10->eclk)) {
> > +		ret = PTR_ERR(ov02a10->eclk);
> > +		dev_err(dev, "failed to get eclk %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
> > +				       &ov02a10->eclk_freq);
> > +	if (ret) {
> > +		dev_err(dev, "failed to get eclk frequency\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq);
> > +	if (ret) {
> > +		dev_err(dev, "failed to set eclk frequency (24MHz)\n");
> > +		return ret;
> > +	}
> > +
> > +	if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) {
> > +		dev_warn(dev, "wrong eclk frequency %d Hz, expected: %d Hz\n",
> > +			 ov02a10->eclk_freq, OV02A10_ECLK_FREQ);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
> > +	if (IS_ERR(ov02a10->pd_gpio)) {
> > +		ret = PTR_ERR(ov02a10->pd_gpio);
> > +		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > +	if (IS_ERR(ov02a10->n_rst_gpio)) {
> > +		ret = PTR_ERR(ov02a10->n_rst_gpio);
> > +		dev_err(dev, "failed to get reset-gpios %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	for (i = 0; i < OV02A10_NUM_SUPPLIES; i++)
> > +		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
> > +
> > +	ret = devm_regulator_bulk_get(dev, OV02A10_NUM_SUPPLIES,
> > +				      ov02a10->supplies);
> > +	if (ret) {
> > +		dev_err(dev, "failed to get regulators\n");
> > +		return ret;
> > +	}
> > +
> > +	mutex_init(&ov02a10->mutex);
> > +	ov02a10->cur_mode = &supported_modes[0];
> > +	ret = ov02a10_initialize_controls(ov02a10);
> > +	if (ret) {
> > +		dev_err(dev, "failed to initialize controls\n");
> > +		goto err_destroy_mutex;
> > +	}
> > +
> > +	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
> > +	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
> > +	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to init entity pads: %d", ret);
> > +		goto err_free_handler;
> > +	}
> > +
> > +	pm_runtime_enable(dev);
> > +	if (!pm_runtime_enabled(dev)) {
> > +		ret = ov02a10_power_on(dev);
> > +		if (ret < 0) {
> > +			dev_err(dev, "failed to power on: %d\n", ret);
> > +			goto err_clean_entity;
> > +		}
> > +	}
> > +
> > +	ret = v4l2_async_register_subdev(&ov02a10->subdev);
> > +	if (ret) {
> > +		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
> > +		goto err_clean_entity;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_clean_entity:
> > +	media_entity_cleanup(&ov02a10->subdev.entity);
> > +err_free_handler:
> > +	v4l2_ctrl_handler_free(ov02a10->subdev.ctrl_handler);
> > +err_destroy_mutex:
> > +	mutex_destroy(&ov02a10->mutex);
> > +
> > +	return ret;
> > +}
> > +
> > +static int ov02a10_remove(struct i2c_client *client)
> > +{
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +
> > +	v4l2_async_unregister_subdev(sd);
> > +	media_entity_cleanup(&sd->entity);
> > +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> > +	pm_runtime_disable(&client->dev);
> > +	if (!pm_runtime_status_suspended(&client->dev))
> > +		ov02a10_power_off(&client->dev);
> > +	pm_runtime_set_suspended(&client->dev);
> > +	mutex_destroy(&ov02a10->mutex);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id ov02a10_of_match[] = {
> > +	{ .compatible = "ovti,ov02a10" },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(of, ov02a10_of_match);
> > +
> > +static struct i2c_driver ov02a10_i2c_driver = {
> > +	.driver = {
> > +		.name = "ov02a10",
> > +		.pm = &ov02a10_pm_ops,
> > +		.of_match_table = ov02a10_of_match,
> > +	},
> > +	.probe_new	= &ov02a10_probe,
> > +	.remove		= &ov02a10_remove,
> > +};
> > +
> > +module_i2c_driver(ov02a10_i2c_driver);
> > +
> > +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>");
> > +MODULE_DESCRIPTION("OmniVision OV02A10 sensor driver");
> > +MODULE_LICENSE("GPL v2");
> > +
> 


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-11  9:33   ` Andy Shevchenko
@ 2020-05-11 12:06     ` Dongchun Zhu
  0 siblings, 0 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-11 12:06 UTC (permalink / raw)
  To: Andy Shevchenko
  Cc: linus.walleij, bgolaszewski, mchehab, robh+dt, mark.rutland,
	sakari.ailus, drinkcat, tfiga, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang

Hi Andy,

Thanks for the kindly review.

On Mon, 2020-05-11 at 12:33 +0300, Andy Shevchenko wrote:
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> ...
> 
> > +#define OV02A10_ID(_msb, _lsb)				((_msb) << 8 | (_lsb))
> 
> How often do you use this macro?
> 

Just once.
I would try to use the macro function directly in next release.

> ...
> 
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> 
> > +
> 
> Extra blank line.
> 

Thanks for the carefully reminder.
This error can easily be neglected.
I would remove it in next release.

> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int ov02a10_entity_init_cfg(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = {
> 
> > +		.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
> > +			     : V4L2_SUBDEV_FORMAT_ACTIVE,
> 
> I think it would be fine to have it on one line.
> 

Got it.
Fixed in next release.

> > +		.format = {
> > +			.width = 1600,
> > +			.height = 1200,
> > +		}
> > +	};
> > +
> > +	ov02a10_set_fmt(sd, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +	if (!ret) {
> > +		if (rotation == 180) {
> 
> if (a) {
> 	if (b) {
> 		...
> 	}
> }
> 
> ==
> 
> if (a && b) {
> 	...
> }
> 

Thanks for the reminder :-)
Next release would use:
if (!ret && rotation == 180) {
	...
}

> > +			ov02a10->upside_down = true;
> > +			ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > +		}
> > +	}
> 


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-09  8:06 ` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings Dongchun Zhu
@ 2020-05-11 16:02   ` Rob Herring
  2020-05-11 19:54     ` Sakari Ailus
                       ` (2 more replies)
  0 siblings, 3 replies; 16+ messages in thread
From: Rob Herring @ 2020-05-11 16:02 UTC (permalink / raw)
  To: Dongchun Zhu
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko,
	mark.rutland, sakari.ailus, drinkcat, tfiga, matthias.bgg,
	bingbu.cao, srv_heupstream, linux-mediatek, linux-arm-kernel,
	sj.huang, linux-media, devicetree, louis.kuo, shengnan.wang

On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> Add DT bindings documentation for Omnivision OV02A10 image sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  .../bindings/media/i2c/ovti,ov02a10.yaml           | 184 +++++++++++++++++++++
>  MAINTAINERS                                        |   7 +
>  2 files changed, 191 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> new file mode 100644
> index 0000000..5468d1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> @@ -0,0 +1,184 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
> +
> +maintainers:
> +  - Dongchun Zhu <dongchun.zhu@mediatek.com>
> +
> +description: |-
> +  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
> +  image sensor, which is the latest production derived from Omnivision's CMOS
> +  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
> +  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
> +  sensor output is available via CSI-2 serial data output.
> +
> +properties:
> +  compatible:
> +    const: ovti,ov02a10
> +
> +  reg:
> +    description: I2C device address

Drop this. Nothing specific to this device.

> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: top mux camtg clock
> +      - description: devider clock

typo

> +
> +  clock-names:
> +    items:
> +      - const: eclk
> +      - const: freq_mux
> +
> +  clock-frequency:
> +    description:
> +      Frequency of the eclk clock in Hertz.
> +
> +  dovdd-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +
> +  avdd-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +  dvdd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +
> +  powerdown-gpios:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  rotation:
> +    description:
> +      Definition of the sensor's placement, valid values are 0 and 180.
> +    allOf:
> +      - $ref: "/schemas/types.yaml#/definitions/uint32"
> +      - enum:
> +          - 0    # Sensor Mounted Upright (default)
> +          - 180  # Sensor Mounted Upside Down
> +
> +  ovti,mipi-tx-speed:
> +    description:
> +      Indication of MIPI transmission speed select, which is to control D-PHY
> +      timing setting by adjusting MIPI clock voltage to improve the clock
> +      driver capability.
> +    allOf:
> +      - $ref: "/schemas/types.yaml#/definitions/uint32"
> +      - enum:
> +          - 0    #  20MHz -  30MHz
> +          - 1    #  30MHz -  50MHz
> +          - 2    #  50MHz -  75MHz
> +          - 3    #  75MHz - 100MHz
> +          - 4    # 100MHz - 130MHz (suggested)
> +          - 5    # Manual
> +
> +  # See ../video-interfaces.txt for details
> +  port:
> +    type: object
> +    additionalProperties: false
> +    description:
> +      A node containing an output port node with an endpoint definition
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt

No need for repeating a generic description of a common property.

> +
> +    properties:
> +      endpoint:
> +        type: object
> +
> +        properties:
> +          data-lanes:
> +            description: |-
> +              The driver only supports 1-lane operation.

What the driver supports is not relevant.

> +            items:
> +              - const: 1
> +              - const: 2
> +              - const: 3
> +              - const: 4
> +
> +          clock-noncontinuous:
> +            type: boolean
> +            description: |-
> +              MIPI CSI-2 clock is non-continuous if this property is present,
> +              otherwise it's continuous.

Assume this has a common definition, so just need:

clock-noncontinuous: true

> +
> +          link-frequencies:
> +            allOf:
> +              - $ref: /schemas/types.yaml#/definitions/uint64-array
> +            description:
> +              Allowed data bus frequencies. 39000000 Hz is supported by
> +              the driver.

This too is a common property.

Though 39000000 looks like a constraint. However, what the driver 
supports is not relevant.

> +
> +        required:
> +          - link-frequencies
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - clock-frequency
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - powerdown-gpios
> +  - reset-gpios
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/clock/mt8183-clk.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        clock-frequency = <400000>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov02a10: camera-sensor@3d {
> +            compatible = "ovti,ov02a10";
> +            reg = <0x3d>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&clk_24m_cam>;
> +
> +            clocks = <&topckgen CLK_TOP_MUX_CAMTG>,
> +                     <&topckgen CLK_TOP_UNIVP_192M_D8>;
> +            clock-names = "eclk", "freq_mux";
> +            clock-frequency = <24000000>;
> +
> +            rotation = <180>;
> +            ovti,mipi-tx-speed = <3>;
> +
> +            dovdd-supply = <&mt6358_vcamio_reg>;
> +            avdd-supply = <&mt6358_vcama1_reg>;
> +            dvdd-supply = <&mt6358_vcn18_reg>;
> +
> +            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
> +            reset-gpios = <&pio 109 GPIO_ACTIVE_HIGH>;
> +
> +            port {
> +                wcam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_wcam>;
> +                    data-lanes = <1>;

This doesn't match the schema which says this should be 4 entries.

> +                    clock-noncontinuous;
> +                    link-frequencies = /bits/ 64 <390000000>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e64e5db..63a2335 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12389,6 +12389,13 @@ M:	Harald Welte <laforge@gnumonks.org>
>  S:	Maintained
>  F:	drivers/char/pcmcia/cm4040_cs.*
>  
> +OMNIVISION OV02A10 SENSOR DRIVER
> +M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
> +L:	linux-media@vger.kernel.org
> +S:	Maintained
> +T:	git git://linuxtv.org/media_tree.git
> +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> +
>  OMNIVISION OV13858 SENSOR DRIVER
>  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
>  L:	linux-media@vger.kernel.org
> -- 
> 2.9.2

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-11 16:02   ` Rob Herring
@ 2020-05-11 19:54     ` Sakari Ailus
  2020-05-12  2:40     ` Dongchun Zhu
  2020-05-21 19:35     ` Tomasz Figa
  2 siblings, 0 replies; 16+ messages in thread
From: Sakari Ailus @ 2020-05-11 19:54 UTC (permalink / raw)
  To: Rob Herring
  Cc: Dongchun Zhu, linus.walleij, bgolaszewski, mchehab,
	andriy.shevchenko, mark.rutland, drinkcat, tfiga, matthias.bgg,
	bingbu.cao, srv_heupstream, linux-mediatek, linux-arm-kernel,
	sj.huang, linux-media, devicetree, louis.kuo, shengnan.wang

Hi Rob,

On Mon, May 11, 2020 at 11:02:07AM -0500, Rob Herring wrote:
> On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
...

> > +    properties:
> > +      endpoint:
> > +        type: object
> > +
> > +        properties:
> > +          data-lanes:
> > +            description: |-
> > +              The driver only supports 1-lane operation.
> 
> What the driver supports is not relevant.
> 
> > +            items:
> > +              - const: 1
> > +              - const: 2
> > +              - const: 3
> > +              - const: 4
> > +
> > +          clock-noncontinuous:
> > +            type: boolean
> > +            description: |-
> > +              MIPI CSI-2 clock is non-continuous if this property is present,
> > +              otherwise it's continuous.
> 
> Assume this has a common definition, so just need:
> 
> clock-noncontinuous: true
> 

...

> > +                    data-lanes = <1>;
> 
> This doesn't match the schema which says this should be 4 entries.

I believe the intent has been to say there would be 1, 2, 3 or 4 entries
--- i.e. the number of lanes.

-- 
Kind regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-11 16:02   ` Rob Herring
  2020-05-11 19:54     ` Sakari Ailus
@ 2020-05-12  2:40     ` Dongchun Zhu
  2020-05-21 18:59       ` Tomasz Figa
  2020-05-21 19:35     ` Tomasz Figa
  2 siblings, 1 reply; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-12  2:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko,
	mark.rutland, sakari.ailus, drinkcat, tfiga, matthias.bgg,
	bingbu.cao, srv_heupstream, linux-mediatek, linux-arm-kernel,
	sj.huang, linux-media, devicetree, louis.kuo, shengnan.wang

Hi Rob,

Thanks for the review.

On Mon, 2020-05-11 at 11:02 -0500, Rob Herring wrote:
> On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> > Add DT bindings documentation for Omnivision OV02A10 image sensor.
> > 
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  .../bindings/media/i2c/ovti,ov02a10.yaml           | 184 +++++++++++++++++++++
> >  MAINTAINERS                                        |   7 +
> >  2 files changed, 191 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > new file mode 100644
> > index 0000000..5468d1b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > @@ -0,0 +1,184 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (c) 2020 MediaTek Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
> > +
> > +maintainers:
> > +  - Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +
> > +description: |-
> > +  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
> > +  image sensor, which is the latest production derived from Omnivision's CMOS
> > +  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
> > +  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
> > +  sensor output is available via CSI-2 serial data output.
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov02a10
> > +
> > +  reg:
> > +    description: I2C device address
> 
> Drop this. Nothing specific to this device.
> 

Okay. I would release this description in next release.

> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: top mux camtg clock
> > +      - description: devider clock
> 
> typo
> 

Sorry for the mistake.
devider would be replaced of divider in next release.

> > +
> > +  clock-names:
> > +    items:
> > +      - const: eclk
> > +      - const: freq_mux
> > +
> > +  clock-frequency:
> > +    description:
> > +      Frequency of the eclk clock in Hertz.
> > +
> > +  dovdd-supply:
> > +    description:
> > +      Definition of the regulator used as interface power supply.
> > +
> > +  avdd-supply:
> > +    description:
> > +      Definition of the regulator used as analog power supply.
> > +
> > +  dvdd-supply:
> > +    description:
> > +      Definition of the regulator used as digital power supply.
> > +
> > +  powerdown-gpios:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +
> > +  rotation:
> > +    description:
> > +      Definition of the sensor's placement, valid values are 0 and 180.
> > +    allOf:
> > +      - $ref: "/schemas/types.yaml#/definitions/uint32"
> > +      - enum:
> > +          - 0    # Sensor Mounted Upright (default)
> > +          - 180  # Sensor Mounted Upside Down
> > +
> > +  ovti,mipi-tx-speed:
> > +    description:
> > +      Indication of MIPI transmission speed select, which is to control D-PHY
> > +      timing setting by adjusting MIPI clock voltage to improve the clock
> > +      driver capability.
> > +    allOf:
> > +      - $ref: "/schemas/types.yaml#/definitions/uint32"
> > +      - enum:
> > +          - 0    #  20MHz -  30MHz
> > +          - 1    #  30MHz -  50MHz
> > +          - 2    #  50MHz -  75MHz
> > +          - 3    #  75MHz - 100MHz
> > +          - 4    # 100MHz - 130MHz (suggested)
> > +          - 5    # Manual
> > +
> > +  # See ../video-interfaces.txt for details
> > +  port:
> > +    type: object
> > +    additionalProperties: false
> > +    description:
> > +      A node containing an output port node with an endpoint definition
> > +      as documented in
> > +      Documentation/devicetree/bindings/media/video-interfaces.txt
> 
> No need for repeating a generic description of a common property.
> 

Got it.
Description of common property "port" would be removed in next release.

> > +
> > +    properties:
> > +      endpoint:
> > +        type: object
> > +
> > +        properties:
> > +          data-lanes:
> > +            description: |-
> > +              The driver only supports 1-lane operation.
> 
> What the driver supports is not relevant.
> 

Got it.
Remove description in next release by using like this:
data-lanes:
  maxItems: 1

> > +            items:
> > +              - const: 1
> > +              - const: 2
> > +              - const: 3
> > +              - const: 4
> > +
> > +          clock-noncontinuous:
> > +            type: boolean
> > +            description: |-
> > +              MIPI CSI-2 clock is non-continuous if this property is present,
> > +              otherwise it's continuous.
> 
> Assume this has a common definition, so just need:
> 
> clock-noncontinuous: true
> 

Fixed in next release.

> > +
> > +          link-frequencies:
> > +            allOf:
> > +              - $ref: /schemas/types.yaml#/definitions/uint64-array
> > +            description:
> > +              Allowed data bus frequencies. 39000000 Hz is supported by
> > +              the driver.
> 
> This too is a common property.
> 
> Though 39000000 looks like a constraint. However, what the driver 
> supports is not relevant.
> 

Fixed in next release by using:
link-frequencies: true

> > +
> > +        required:
> > +          - link-frequencies
> > +
> > +    required:
> > +      - endpoint
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - clock-frequency
> > +  - dovdd-supply
> > +  - avdd-supply
> > +  - dvdd-supply
> > +  - powerdown-gpios
> > +  - reset-gpios
> > +  - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +
> > +    #include <dt-bindings/clock/mt8183-clk.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c {
> > +        clock-frequency = <400000>;
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        ov02a10: camera-sensor@3d {
> > +            compatible = "ovti,ov02a10";
> > +            reg = <0x3d>;
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&clk_24m_cam>;
> > +
> > +            clocks = <&topckgen CLK_TOP_MUX_CAMTG>,
> > +                     <&topckgen CLK_TOP_UNIVP_192M_D8>;
> > +            clock-names = "eclk", "freq_mux";
> > +            clock-frequency = <24000000>;
> > +
> > +            rotation = <180>;
> > +            ovti,mipi-tx-speed = <3>;
> > +
> > +            dovdd-supply = <&mt6358_vcamio_reg>;
> > +            avdd-supply = <&mt6358_vcama1_reg>;
> > +            dvdd-supply = <&mt6358_vcn18_reg>;
> > +
> > +            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
> > +            reset-gpios = <&pio 109 GPIO_ACTIVE_HIGH>;
> > +
> > +            port {
> > +                wcam_out: endpoint {
> > +                    remote-endpoint = <&mipi_in_wcam>;
> > +                    data-lanes = <1>;
> 
> This doesn't match the schema which says this should be 4 entries.
> 

Property "data-lanes" shows the number of lanes that sensor supports.
If this property is omitted, four-lane operation is assumed.
For OV02A10, it is one-lane operation, so the property is supposed to be
set to <1>.

> > +                    clock-noncontinuous;
> > +                    link-frequencies = /bits/ 64 <390000000>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index e64e5db..63a2335 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -12389,6 +12389,13 @@ M:	Harald Welte <laforge@gnumonks.org>
> >  S:	Maintained
> >  F:	drivers/char/pcmcia/cm4040_cs.*
> >  
> > +OMNIVISION OV02A10 SENSOR DRIVER
> > +M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +L:	linux-media@vger.kernel.org
> > +S:	Maintained
> > +T:	git git://linuxtv.org/media_tree.git
> > +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > +
> >  OMNIVISION OV13858 SENSOR DRIVER
> >  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
> >  L:	linux-media@vger.kernel.org
> > -- 
> > 2.9.2


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-12  2:40     ` Dongchun Zhu
@ 2020-05-21 18:59       ` Tomasz Figa
  2020-05-24 20:33         ` Sakari Ailus
  0 siblings, 1 reply; 16+ messages in thread
From: Tomasz Figa @ 2020-05-21 18:59 UTC (permalink / raw)
  To: Dongchun Zhu, Rob Herring
  Cc: Linus Walleij, Bartosz Golaszewski, Mauro Carvalho Chehab,
	Andy Shevchenko, Mark Rutland, Sakari Ailus, Nicolas Boichat,
	Matthias Brugger, Cao Bing Bu, srv_heupstream,
	moderated list:ARM/Mediatek SoC support,
	list@263.net:IOMMU DRIVERS
	<iommu@lists.linux-foundation.org>,
	Joerg Roedel <joro@8bytes.org>,,
	Sj Huang, Linux Media Mailing List, linux-devicetree, Louis Kuo,
	Shengnan Wang (王圣男)

Hi Dongchun, Rob,

On Tue, May 12, 2020 at 4:41 AM Dongchun Zhu <dongchun.zhu@mediatek.com> wrote:
>
> Hi Rob,
>
> Thanks for the review.
>
> On Mon, 2020-05-11 at 11:02 -0500, Rob Herring wrote:
> > On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
[snip]
> > > +            port {
> > > +                wcam_out: endpoint {
> > > +                    remote-endpoint = <&mipi_in_wcam>;
> > > +                    data-lanes = <1>;
> >
> > This doesn't match the schema which says this should be 4 entries.
> >
>
> Property "data-lanes" shows the number of lanes that sensor supports.
> If this property is omitted, four-lane operation is assumed.
> For OV02A10, it is one-lane operation, so the property is supposed to be
> set to <1>.
>

To clarify on this, the ov02a10 sensor supports only 1 lane. It's not
a driver limitation.

Best regards,
Tomasz

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
  2020-05-11  8:51   ` Sakari Ailus
  2020-05-11  9:33   ` Andy Shevchenko
@ 2020-05-21 19:32   ` Tomasz Figa
  2020-05-23  4:50     ` Dongchun Zhu
  2 siblings, 1 reply; 16+ messages in thread
From: Tomasz Figa @ 2020-05-21 19:32 UTC (permalink / raw)
  To: Dongchun Zhu
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, sakari.ailus, drinkcat, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang

Hi Dongchun,

On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> Add a V4L2 sub-device driver for OV02A10 image sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  MAINTAINERS                 |    1 +
>  drivers/media/i2c/Kconfig   |   13 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/ov02a10.c | 1094 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 1109 insertions(+)
>  create mode 100644 drivers/media/i2c/ov02a10.c
> 

Thank you for the patch. Please see my comments inline.

[snip]
> +struct ov02a10 {
> +	u32			eclk_freq;
> +	u32                     mipi_clock_tx_speed;
> +
> +	struct clk		*eclk;
> +	struct gpio_desc	*pd_gpio;
> +	struct gpio_desc	*n_rst_gpio;
> +	struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES];
> +
> +	bool			streaming;
> +	bool			upside_down;
> +	bool			mipi_clock_tx_speed_select_enable;
> +	bool			mipi_clock_hs_mode_enable;
> +
> +	/*
> +	 * Serialize control access, get/set format, get selection
> +	 * and start streaming.
> +	 */
> +	struct mutex		mutex;
> +	struct v4l2_subdev	subdev;
> +	struct media_pad	pad;
> +	struct v4l2_ctrl	*anal_gain;
> +	struct v4l2_ctrl	*exposure;
> +	struct v4l2_ctrl	*hblank;
> +	struct v4l2_ctrl	*vblank;
> +	struct v4l2_ctrl	*test_pattern;
> +	struct v4l2_mbus_framefmt	fmt;

nit: Remove the tabs between types and names and use single spaces. As you
can see above, even tabs don't guarantee equal alignment. And they actually
make adding fields more difficult, because if a longer field is added, the
alignment breaks.

[snip]
> +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> +			      unsigned char *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(client, reg);
> +

nit: Unnecessary blank line.

> +	if (ret < 0)
> +		return ret;
> +
> +	*val = (unsigned char)ret;
> +
> +	return 0;
> +}
[snip]
> +static int __maybe_unused ov02a10_power_on(struct device *dev)

How is it possible that this function may be unused? If this driver allows
disabling runtime PM, then there is still a need to configure the clock,
regulator and GPIO. If not, there shouldn't be a case where this function
is unused.

> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +	int ret;
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> +
> +	ret = clk_prepare_enable(ov02a10->eclk);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable eclk\n");
> +		return ret;
> +	}
> +
> +	ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable regulators\n");
> +		goto disable_clk;
> +	}
> +	usleep_range(5000, 6000);
> +
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 1);

This is a "powerdown" GPIO. It must be set to 0 if the sensor is to be
powered on.

> +	usleep_range(5000, 6000);
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1);
> +	usleep_range(5000, 6000);
> +
> +	ret = ov02a10_check_sensor_id(ov02a10);
> +	if (ret)
> +		goto disable_regulator;
> +
> +	return 0;
> +
> +disable_regulator:
> +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> +disable_clk:
> +	clk_disable_unprepare(ov02a10->eclk);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ov02a10_power_off(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> +
> +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> +	clk_disable_unprepare(ov02a10->eclk);
> +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);

Similar comment as above. To power off the sensor, the "powerdown" GPIO
needs to be active, i.e. 1.

[snip]
> +/*
> + * ov02a10_set_exposure - Function called when setting exposure time
> + * @priv: Pointer to device structure
> + * @val: Variable for exposure time, in the unit of micro-second
> + *
> + * Set exposure time based on input value.
> + *
> + * Return: 0 on success
> + */
> +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;

How does this page switch work? According to the documentation I have, the
register allows selecting between a few different pages. However, there
should be two page pointers - one for the AP and the other for the sensor,
so that when the AP is programming page X, the sensor can have consistent
settings from page Y. But here we only set one register and always with
page 1.

> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H,
> +					val >> OV02A10_EXP_SHIFT);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);

This patch defines REG_GLOBAL_EFFECTIVE to 0x01. I don't see such register
mentioned in the documentation.

> +}
> +
> +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);
> +}
> +
> +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	u32 vts = val + ov02a10->cur_mode->height - OV02A10_BASIC_LINE;
> +	int ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H,
> +					vts >> OV02A10_VTS_SHIFT);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, vts);
> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> +					 REG_ENABLE);
> +}
> +
> +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	int ret;
> +
> +	if (pattern)
> +		pattern = OV02A10_TEST_PATTERN_ENABLE;

Is this necessary? Our control can be 0 for disabled and 1 for color bars.
The latter is the same as the above macro.

[snip]
> +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> +	const struct ov02a10_mode *mode;
> +	struct v4l2_ctrl_handler *handler;
> +	struct v4l2_ctrl *ctrl;
> +	u64 exposure_max;
> +	u32 pixel_rate, h_blank;
> +	int ret;
> +
> +	handler = &ov02a10->ctrl_handler;
> +	mode = ov02a10->cur_mode;
> +	ret = v4l2_ctrl_handler_init(handler, 7);
> +	if (ret)
> +		return ret;
> +
> +	handler->lock = &ov02a10->mutex;
> +
> +	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
> +				      link_freq_menu_items);
> +	if (ctrl)
> +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	pixel_rate = to_pixel_rate(0);
> +	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
> +			  pixel_rate);
> +
> +	h_blank = mode->hts_def - mode->width;
> +	ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> +					    h_blank, h_blank, 1, h_blank);
> +	if (ov02a10->hblank)
> +		ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +

Do we need to hold a pointer to this control? We don't seem to ever access
it anywhere else in the driver.

> +	ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					    V4L2_CID_VBLANK, mode->vts_def -
> +					    mode->height,
> +					    OV02A10_VTS_MAX - mode->height, 1,
> +					    mode->vts_def - mode->height);
> +

Ditto.

> +	exposure_max = mode->vts_def - 4;
> +	ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					      V4L2_CID_EXPOSURE,
> +					      OV02A10_EXPOSURE_MIN,
> +					      exposure_max,
> +					      OV02A10_EXPOSURE_STEP,
> +					      mode->exp_def);
> +
> +	ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> +					       V4L2_CID_ANALOGUE_GAIN,
> +					       OV02A10_GAIN_MIN,
> +					       OV02A10_GAIN_MAX,
> +					       OV02A10_GAIN_STEP,
> +					       OV02A10_GAIN_DEFAULT);

Ditto.

> +
> +	ov02a10->test_pattern =
> +		v4l2_ctrl_new_std_menu_items(handler, &ov02a10_ctrl_ops,
> +					     V4L2_CID_TEST_PATTERN,
> +					     ARRAY_SIZE(ov02a10_test_pattern_menu) -
> +					     1, 0, 0,
> +					     ov02a10_test_pattern_menu);

Ditto.

[snip]
> +	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ov02a10->pd_gpio)) {
> +		ret = PTR_ERR(ov02a10->pd_gpio);
> +		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);

I've asked a question about the right convention to define active low pins,
but I don't remember seeing an answer. We need to clarify this to avoid
confusion. Especially since the current binding documentation doesn't
mention anything about the sensor being active low. Let me also post a
comment to the binding patch.

> +	if (IS_ERR(ov02a10->n_rst_gpio)) {
> +		ret = PTR_ERR(ov02a10->n_rst_gpio);
> +		dev_err(dev, "failed to get reset-gpios %d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < OV02A10_NUM_SUPPLIES; i++)
> +		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
> +
> +	ret = devm_regulator_bulk_get(dev, OV02A10_NUM_SUPPLIES,
> +				      ov02a10->supplies);
> +	if (ret) {
> +		dev_err(dev, "failed to get regulators\n");
> +		return ret;
> +	}
> +
> +	mutex_init(&ov02a10->mutex);
> +	ov02a10->cur_mode = &supported_modes[0];
> +	ret = ov02a10_initialize_controls(ov02a10);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize controls\n");
> +		goto err_destroy_mutex;
> +	}
> +
> +	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
> +	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to init entity pads: %d", ret);
> +		goto err_free_handler;
> +	}
> +
> +	pm_runtime_enable(dev);
> +	if (!pm_runtime_enabled(dev)) {
> +		ret = ov02a10_power_on(dev);
> +		if (ret < 0) {
> +			dev_err(dev, "failed to power on: %d\n", ret);
> +			goto err_clean_entity;
> +		}
> +	}
> +
> +	ret = v4l2_async_register_subdev(&ov02a10->subdev);
> +	if (ret) {
> +		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
> +		goto err_clean_entity;
> +	}
> +
> +	return 0;
> +
> +err_clean_entity:

Need to power off if !pm_runtime_enabled().

Best regards,
Tomasz

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-11 16:02   ` Rob Herring
  2020-05-11 19:54     ` Sakari Ailus
  2020-05-12  2:40     ` Dongchun Zhu
@ 2020-05-21 19:35     ` Tomasz Figa
  2020-05-22  9:44       ` Dongchun Zhu
  2 siblings, 1 reply; 16+ messages in thread
From: Tomasz Figa @ 2020-05-21 19:35 UTC (permalink / raw)
  To: Rob Herring
  Cc: Dongchun Zhu, linus.walleij, bgolaszewski, mchehab,
	andriy.shevchenko, mark.rutland, sakari.ailus, drinkcat,
	matthias.bgg, bingbu.cao, srv_heupstream, linux-mediatek,
	linux-arm-kernel, sj.huang, linux-media, devicetree, louis.kuo,
	shengnan.wang

Hi Rob,

On Mon, May 11, 2020 at 11:02:07AM -0500, Rob Herring wrote:
> On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> > Add DT bindings documentation for Omnivision OV02A10 image sensor.
> > 
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  .../bindings/media/i2c/ovti,ov02a10.yaml           | 184 +++++++++++++++++++++
> >  MAINTAINERS                                        |   7 +
> >  2 files changed, 191 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > new file mode 100644
> > index 0000000..5468d1b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > @@ -0,0 +1,184 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (c) 2020 MediaTek Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
> > +
> > +maintainers:
> > +  - Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +
> > +description: |-
> > +  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
> > +  image sensor, which is the latest production derived from Omnivision's CMOS
> > +  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
> > +  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
> > +  sensor output is available via CSI-2 serial data output.
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov02a10
> > +
> > +  reg:
> > +    description: I2C device address
> 
> Drop this. Nothing specific to this device.
> 
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: top mux camtg clock
> > +      - description: devider clock
> 
> typo
> 
> > +
> > +  clock-names:
> > +    items:
> > +      - const: eclk
> > +      - const: freq_mux
> > +
> > +  clock-frequency:
> > +    description:
> > +      Frequency of the eclk clock in Hertz.
> > +
> > +  dovdd-supply:
> > +    description:
> > +      Definition of the regulator used as interface power supply.
> > +
> > +  avdd-supply:
> > +    description:
> > +      Definition of the regulator used as analog power supply.
> > +
> > +  dvdd-supply:
> > +    description:
> > +      Definition of the regulator used as digital power supply.
> > +
> > +  powerdown-gpios:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    maxItems: 1

I asked a question about defining GPIO polarities some time ago, but I
guess it slipped through.

The chip documentation calls the reset pin as "RST_PAD (low level
reset)". Where should the inversion be handled, in the driver or here,
by having the DT include a necessary flag in the specifier?

Best regards,
Tomasz

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-21 19:35     ` Tomasz Figa
@ 2020-05-22  9:44       ` Dongchun Zhu
  0 siblings, 0 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-22  9:44 UTC (permalink / raw)
  To: Tomasz Figa
  Cc: Rob Herring, linus.walleij, bgolaszewski, mchehab,
	andriy.shevchenko, mark.rutland, sakari.ailus, drinkcat,
	matthias.bgg, bingbu.cao, srv_heupstream, linux-mediatek,
	linux-arm-kernel, sj.huang, linux-media, devicetree, louis.kuo,
	shengnan.wang, dongchun.zhu

Hi Tomasz, Rob,

On Thu, 2020-05-21 at 19:35 +0000, Tomasz Figa wrote:
> Hi Rob,
> 
> On Mon, May 11, 2020 at 11:02:07AM -0500, Rob Herring wrote:
> > On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> > > Add DT bindings documentation for Omnivision OV02A10 image sensor.
> > > 
> > > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > > ---
> > >  .../bindings/media/i2c/ovti,ov02a10.yaml           | 184 +++++++++++++++++++++
> > >  MAINTAINERS                                        |   7 +
> > >  2 files changed, 191 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > > new file mode 100644
> > > index 0000000..5468d1b
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> > > @@ -0,0 +1,184 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +# Copyright (c) 2020 MediaTek Inc.
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Dongchun Zhu <dongchun.zhu@mediatek.com>
> > > +
> > > +description: |-
> > > +  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
> > > +  image sensor, which is the latest production derived from Omnivision's CMOS
> > > +  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
> > > +  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
> > > +  sensor output is available via CSI-2 serial data output.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: ovti,ov02a10
> > > +
> > > +  reg:
> > > +    description: I2C device address
> > 
> > Drop this. Nothing specific to this device.
> > 
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: top mux camtg clock
> > > +      - description: devider clock
> > 
> > typo
> > 
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: eclk
> > > +      - const: freq_mux
> > > +
> > > +  clock-frequency:
> > > +    description:
> > > +      Frequency of the eclk clock in Hertz.
> > > +
> > > +  dovdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as interface power supply.
> > > +
> > > +  avdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as analog power supply.
> > > +
> > > +  dvdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as digital power supply.
> > > +
> > > +  powerdown-gpios:
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    maxItems: 1
> 
> I asked a question about defining GPIO polarities some time ago, but I
> guess it slipped through.
> 
> The chip documentation calls the reset pin as "RST_PAD (low level
> reset)". Where should the inversion be handled, in the driver or here,
> by having the DT include a necessary flag in the specifier?
> 
> Best regards,
> Tomasz

For powerdown-gpios and reset-gpios, I actually defined two totally
different GPIO polarities in DT according to OV02A10 chip documentation.
One is GPIO_ACTIVE_LOW, the other is GPIO_ACTIVE_HIGH (see examples
below).

So I'm wondering if we could add such one polarity-flag that Tomasz
suggested.


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver
  2020-05-21 19:32   ` Tomasz Figa
@ 2020-05-23  4:50     ` Dongchun Zhu
  0 siblings, 0 replies; 16+ messages in thread
From: Dongchun Zhu @ 2020-05-23  4:50 UTC (permalink / raw)
  To: Tomasz Figa
  Cc: linus.walleij, bgolaszewski, mchehab, andriy.shevchenko, robh+dt,
	mark.rutland, sakari.ailus, drinkcat, matthias.bgg, bingbu.cao,
	srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
	linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu

Hi Tomasz,

Thanks for the review. My replies are as below.

On Thu, 2020-05-21 at 19:32 +0000, Tomasz Figa wrote:
> Hi Dongchun,
> 
> On Sat, May 09, 2020 at 04:06:27PM +0800, Dongchun Zhu wrote:
> > Add a V4L2 sub-device driver for OV02A10 image sensor.
> > 
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  MAINTAINERS                 |    1 +
> >  drivers/media/i2c/Kconfig   |   13 +
> >  drivers/media/i2c/Makefile  |    1 +
> >  drivers/media/i2c/ov02a10.c | 1094 +++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 1109 insertions(+)
> >  create mode 100644 drivers/media/i2c/ov02a10.c
> > 
> 
> Thank you for the patch. Please see my comments inline.
> 
> [snip]
> > +struct ov02a10 {
> > +	u32			eclk_freq;
> > +	u32                     mipi_clock_tx_speed;
> > +
> > +	struct clk		*eclk;
> > +	struct gpio_desc	*pd_gpio;
> > +	struct gpio_desc	*n_rst_gpio;
> > +	struct regulator_bulk_data supplies[OV02A10_NUM_SUPPLIES];
> > +
> > +	bool			streaming;
> > +	bool			upside_down;
> > +	bool			mipi_clock_tx_speed_select_enable;
> > +	bool			mipi_clock_hs_mode_enable;
> > +
> > +	/*
> > +	 * Serialize control access, get/set format, get selection
> > +	 * and start streaming.
> > +	 */
> > +	struct mutex		mutex;
> > +	struct v4l2_subdev	subdev;
> > +	struct media_pad	pad;
> > +	struct v4l2_ctrl	*anal_gain;
> > +	struct v4l2_ctrl	*exposure;
> > +	struct v4l2_ctrl	*hblank;
> > +	struct v4l2_ctrl	*vblank;
> > +	struct v4l2_ctrl	*test_pattern;
> > +	struct v4l2_mbus_framefmt	fmt;
> 
> nit: Remove the tabs between types and names and use single spaces. As you
> can see above, even tabs don't guarantee equal alignment. And they actually
> make adding fields more difficult, because if a longer field is added, the
> alignment breaks.
> 

Thanks for sharing the rule of adding new fields.
Fixed in next release.

> [snip]
> > +static int ov02a10_read_smbus(struct ov02a10 *ov02a10, unsigned char reg,
> > +			      unsigned char *val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_read_byte_data(client, reg);
> > +
> 
> nit: Unnecessary blank line.
> 

Sorry for the carelessness.
Fixed in next release.

> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = (unsigned char)ret;
> > +
> > +	return 0;
> > +}
> [snip]
> > +static int __maybe_unused ov02a10_power_on(struct device *dev)
> 
> How is it possible that this function may be unused? If this driver allows
> disabling runtime PM, then there is still a need to configure the clock,
> regulator and GPIO. If not, there shouldn't be a case where this function
> is unused.
> 

Thanks for the reminder.
Modifier __maybe_unused would be removed in next release.

> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +	int ret;
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> > +
> > +	ret = clk_prepare_enable(ov02a10->eclk);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to enable eclk\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = regulator_bulk_enable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to enable regulators\n");
> > +		goto disable_clk;
> > +	}
> > +	usleep_range(5000, 6000);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 1);
> 
> This is a "powerdown" GPIO. It must be set to 0 if the sensor is to be
> powered on.
> 

The value set by gpiod_set_value_cansleep() API actually depends upon
GPIO polarity defined in DT.
Since I set GPIO_ACTIVE_LOW to powerdown,
gpiod_set_value_cansleep(gpio_desc, value) would set !value to
gpio_desc.
Thus here powerdown would be low-state when sensor is powered on.
For GPIO polarity, I also post a comment to the binding patch.

> > +	usleep_range(5000, 6000);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 1);
> > +	usleep_range(5000, 6000);
> > +
> > +	ret = ov02a10_check_sensor_id(ov02a10);
> > +	if (ret)
> > +		goto disable_regulator;
> > +
> > +	return 0;
> > +
> > +disable_regulator:
> > +	regulator_bulk_disable(OV02A10_NUM_SUPPLIES, ov02a10->supplies);
> > +disable_clk:
> > +	clk_disable_unprepare(ov02a10->eclk);
> > +
> > +	return ret;
> > +}
> > +
> > +static int __maybe_unused ov02a10_power_off(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > +
> > +	gpiod_set_value_cansleep(ov02a10->n_rst_gpio, 0);
> > +	clk_disable_unprepare(ov02a10->eclk);
> > +	gpiod_set_value_cansleep(ov02a10->pd_gpio, 0);
> 
> Similar comment as above. To power off the sensor, the "powerdown" GPIO
> needs to be active, i.e. 1.
> 

Similar setting.
It depends upon GPIO polarity.

> [snip]
> > +/*
> > + * ov02a10_set_exposure - Function called when setting exposure time
> > + * @priv: Pointer to device structure
> > + * @val: Variable for exposure time, in the unit of micro-second
> > + *
> > + * Set exposure time based on input value.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int ov02a10_set_exposure(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> 
> How does this page switch work? According to the documentation I have, the
> register allows selecting between a few different pages. However, there
> should be two page pointers - one for the AP and the other for the sensor,
> so that when the AP is programming page X, the sensor can have consistent
> settings from page Y. But here we only set one register and always with
> page 1.
> 

Thanks for the carefully observation.
The style or requirement of register setting here is suggested by OV
vendor.
From hardware signal behavior and effect-test, this setting should be
right.
But for your concern, we can also dig into it with OV.
Let's have time to talk with OV.

> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_H,
> > +					val >> OV02A10_EXP_SHIFT);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_EXPOSURE_L, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> 
> This patch defines REG_GLOBAL_EFFECTIVE to 0x01. I don't see such register
> mentioned in the documentation.
> 

There may be several editions of sensor documentation.
From OV, 0x01 is one register shall be updated to keep
exposure/gain/test pattern... register settings effective.

> > +}
> > +
> > +static int ov02a10_set_gain(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_GAIN, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> > +}
> > +
> > +static int ov02a10_set_vblank(struct ov02a10 *ov02a10, int val)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	u32 vts = val + ov02a10->cur_mode->height - OV02A10_BASIC_LINE;
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, REG_PAGE_SWITCH, REG_ENABLE);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_H,
> > +					vts >> OV02A10_VTS_SHIFT);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = i2c_smbus_write_byte_data(client, OV02A10_REG_VTS_L, vts);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, REG_GLOBAL_EFFECTIVE,
> > +					 REG_ENABLE);
> > +}
> > +
> > +static int ov02a10_set_test_pattern(struct ov02a10 *ov02a10, int pattern)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	int ret;
> > +
> > +	if (pattern)
> > +		pattern = OV02A10_TEST_PATTERN_ENABLE;
> 
> Is this necessary? Our control can be 0 for disabled and 1 for color bars.
> The latter is the same as the above macro.
> 

Yes. It looks redundant here.
Fixed in next release.

> [snip]
> > +static int ov02a10_initialize_controls(struct ov02a10 *ov02a10)
> > +{
> > +	struct i2c_client *client = v4l2_get_subdevdata(&ov02a10->subdev);
> > +	const struct ov02a10_mode *mode;
> > +	struct v4l2_ctrl_handler *handler;
> > +	struct v4l2_ctrl *ctrl;
> > +	u64 exposure_max;
> > +	u32 pixel_rate, h_blank;
> > +	int ret;
> > +
> > +	handler = &ov02a10->ctrl_handler;
> > +	mode = ov02a10->cur_mode;
> > +	ret = v4l2_ctrl_handler_init(handler, 7);
> > +	if (ret)
> > +		return ret;
> > +
> > +	handler->lock = &ov02a10->mutex;
> > +
> > +	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
> > +				      link_freq_menu_items);
> > +	if (ctrl)
> > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	pixel_rate = to_pixel_rate(0);
> > +	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
> > +			  pixel_rate);
> > +
> > +	h_blank = mode->hts_def - mode->width;
> > +	ov02a10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> > +					    h_blank, h_blank, 1, h_blank);
> > +	if (ov02a10->hblank)
> > +		ov02a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> 
> Do we need to hold a pointer to this control? We don't seem to ever access
> it anywhere else in the driver.
> 

No.
These lines would be removed in next release.

> > +	ov02a10->vblank = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					    V4L2_CID_VBLANK, mode->vts_def -
> > +					    mode->height,
> > +					    OV02A10_VTS_MAX - mode->height, 1,
> > +					    mode->vts_def - mode->height);
> > +
> 
> Ditto.
> 

These lines would be removed in next release.

> > +	exposure_max = mode->vts_def - 4;
> > +	ov02a10->exposure = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					      V4L2_CID_EXPOSURE,
> > +					      OV02A10_EXPOSURE_MIN,
> > +					      exposure_max,
> > +					      OV02A10_EXPOSURE_STEP,
> > +					      mode->exp_def);
> > +
> > +	ov02a10->anal_gain = v4l2_ctrl_new_std(handler, &ov02a10_ctrl_ops,
> > +					       V4L2_CID_ANALOGUE_GAIN,
> > +					       OV02A10_GAIN_MIN,
> > +					       OV02A10_GAIN_MAX,
> > +					       OV02A10_GAIN_STEP,
> > +					       OV02A10_GAIN_DEFAULT);
> 
> Ditto.
> 

Fields: exposure and anal_gain would be removed in next release.
But v4l2_ctrl_new_std remains, as user may set exp/gain. 

> > +
> > +	ov02a10->test_pattern =
> > +		v4l2_ctrl_new_std_menu_items(handler, &ov02a10_ctrl_ops,
> > +					     V4L2_CID_TEST_PATTERN,
> > +					     ARRAY_SIZE(ov02a10_test_pattern_menu) -
> > +					     1, 0, 0,
> > +					     ov02a10_test_pattern_menu);
> 
> Ditto.
> 

Fields: test_pattern would be removed in next release.
But v4l2_ctrl_new_std_menu_items remains.

> [snip]
> > +	ov02a10->pd_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
> > +	if (IS_ERR(ov02a10->pd_gpio)) {
> > +		ret = PTR_ERR(ov02a10->pd_gpio);
> > +		dev_err(dev, "failed to get powerdown-gpios %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ov02a10->n_rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> 
> I've asked a question about the right convention to define active low pins,
> but I don't remember seeing an answer. We need to clarify this to avoid
> confusion. Especially since the current binding documentation doesn't
> mention anything about the sensor being active low. Let me also post a
> comment to the binding patch.
> 

It depends upon GPIO polarity, however, which may not be emphasized in
current DT version.

> > +	if (IS_ERR(ov02a10->n_rst_gpio)) {
> > +		ret = PTR_ERR(ov02a10->n_rst_gpio);
> > +		dev_err(dev, "failed to get reset-gpios %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	for (i = 0; i < OV02A10_NUM_SUPPLIES; i++)
> > +		ov02a10->supplies[i].supply = ov02a10_supply_names[i];
> > +
> > +	ret = devm_regulator_bulk_get(dev, OV02A10_NUM_SUPPLIES,
> > +				      ov02a10->supplies);
> > +	if (ret) {
> > +		dev_err(dev, "failed to get regulators\n");
> > +		return ret;
> > +	}
> > +
> > +	mutex_init(&ov02a10->mutex);
> > +	ov02a10->cur_mode = &supported_modes[0];
> > +	ret = ov02a10_initialize_controls(ov02a10);
> > +	if (ret) {
> > +		dev_err(dev, "failed to initialize controls\n");
> > +		goto err_destroy_mutex;
> > +	}
> > +
> > +	ov02a10->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	ov02a10->subdev.entity.ops = &ov02a10_subdev_entity_ops;
> > +	ov02a10->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +	ov02a10->pad.flags = MEDIA_PAD_FL_SOURCE;
> > +	ret = media_entity_pads_init(&ov02a10->subdev.entity, 1, &ov02a10->pad);
> > +	if (ret < 0) {
> > +		dev_err(dev, "failed to init entity pads: %d", ret);
> > +		goto err_free_handler;
> > +	}
> > +
> > +	pm_runtime_enable(dev);
> > +	if (!pm_runtime_enabled(dev)) {
> > +		ret = ov02a10_power_on(dev);
> > +		if (ret < 0) {
> > +			dev_err(dev, "failed to power on: %d\n", ret);
> > +			goto err_clean_entity;
> > +		}
> > +	}
> > +
> > +	ret = v4l2_async_register_subdev(&ov02a10->subdev);
> > +	if (ret) {
> > +		dev_err(dev, "failed to register V4L2 subdev: %d", ret);
> > +		goto err_clean_entity;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_clean_entity:
> 
> Need to power off if !pm_runtime_enabled().
> 

Thanks for the reminder.
Fixed in next release by adding power off into err_clean_entity.

> Best regards,
> Tomasz


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
  2020-05-21 18:59       ` Tomasz Figa
@ 2020-05-24 20:33         ` Sakari Ailus
  0 siblings, 0 replies; 16+ messages in thread
From: Sakari Ailus @ 2020-05-24 20:33 UTC (permalink / raw)
  To: Tomasz Figa
  Cc: Dongchun Zhu, Rob Herring, Linus Walleij, Bartosz Golaszewski,
	Mauro Carvalho Chehab, Andy Shevchenko, Mark Rutland,
	Nicolas Boichat, Matthias Brugger, Cao Bing Bu, srv_heupstream,
	moderated list:ARM/Mediatek SoC support,
	list@263.net:IOMMU DRIVERS
	<iommu@lists.linux-foundation.org>,
	Joerg Roedel <joro@8bytes.org>,,
	Sj Huang, Linux Media Mailing List, linux-devicetree, Louis Kuo,
	Shengnan Wang (王圣男)

On Thu, May 21, 2020 at 08:59:56PM +0200, Tomasz Figa wrote:
> Hi Dongchun, Rob,
> 
> On Tue, May 12, 2020 at 4:41 AM Dongchun Zhu <dongchun.zhu@mediatek.com> wrote:
> >
> > Hi Rob,
> >
> > Thanks for the review.
> >
> > On Mon, 2020-05-11 at 11:02 -0500, Rob Herring wrote:
> > > On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> [snip]
> > > > +            port {
> > > > +                wcam_out: endpoint {
> > > > +                    remote-endpoint = <&mipi_in_wcam>;
> > > > +                    data-lanes = <1>;
> > >
> > > This doesn't match the schema which says this should be 4 entries.
> > >
> >
> > Property "data-lanes" shows the number of lanes that sensor supports.
> > If this property is omitted, four-lane operation is assumed.
> > For OV02A10, it is one-lane operation, so the property is supposed to be
> > set to <1>.
> >
> 
> To clarify on this, the ov02a10 sensor supports only 1 lane. It's not
> a driver limitation.

If there's nothing to configure there, then the property should be omitted.
I understood the sensor supported one to four lanes...

-- 
Sakari Ailus

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-09  8:06 [V8, 0/2] media: i2c: Add support for OV02A10 sensor Dongchun Zhu
2020-05-09  8:06 ` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings Dongchun Zhu
2020-05-11 16:02   ` Rob Herring
2020-05-11 19:54     ` Sakari Ailus
2020-05-12  2:40     ` Dongchun Zhu
2020-05-21 18:59       ` Tomasz Figa
2020-05-24 20:33         ` Sakari Ailus
2020-05-21 19:35     ` Tomasz Figa
2020-05-22  9:44       ` Dongchun Zhu
2020-05-09  8:06 ` [V8, 2/2] media: i2c: ov02a10: Add OV02A10 image sensor driver Dongchun Zhu
2020-05-11  8:51   ` Sakari Ailus
2020-05-11 11:52     ` Dongchun Zhu
2020-05-11  9:33   ` Andy Shevchenko
2020-05-11 12:06     ` Dongchun Zhu
2020-05-21 19:32   ` Tomasz Figa
2020-05-23  4:50     ` Dongchun Zhu

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git