Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/14] Allwinner MIPI CSI-2 support for A31/V3s/A83T
@ 2020-10-23 17:45 Paul Kocialkowski
  2020-10-23 17:45 ` [PATCH 01/14] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Paul Kocialkowski
                   ` (15 more replies)
  0 siblings, 16 replies; 66+ messages in thread
From: Paul Kocialkowski @ 2020-10-23 17:45 UTC (permalink / raw)
  To: linux-media, devicetree, linux-arm-kernel, linux-kernel, devel,
	linux-sunxi
  Cc: Mauro Carvalho Chehab, Rob Herring, Maxime Ripard, Chen-Yu Tsai,
	Yong Deng, Kishon Vijay Abraham I, Vinod Koul, Helen Koike,
	Greg Kroah-Hartman, Philipp Zabel, Paul Kocialkowski,
	Hans Verkuil, Sakari Ailus, Thomas Petazzoni, Hans Verkuil,
	kevin.lhopital

This series introduces support for MIPI CSI-2, with the A31 controller that is
found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific
controller. While the former uses the same MIPI D-PHY that is already supported
for DSI, the latter embeds its own D-PHY.

In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2)
and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API.
This allows adding Rx support in the A31 D-PHY driver.

A few changes and fixes are applied to the A31 CSI controller driver, in order
to support the MIPI CSI-2 use-case.

Follows is the V4L2 device topology representing the interactions between
the MIPI CSI-2 sensor, the MIPI CSI-2 controller (which controls the D-PHY)
and the CSI controller:
- entity 1: sun6i-csi (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video0
	pad0: Sink
		<- "sun6i-mipi-csi2":1 [ENABLED,IMMUTABLE]

- entity 5: sun6i-mipi-csi2 (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
	pad0: Sink
		<- "ov5648 0-0036":0 [ENABLED,IMMUTABLE]
	pad1: Source
		-> "sun6i-csi":0 [ENABLED,IMMUTABLE]

- entity 8: ov5648 0-0036 (1 pad, 1 link)
            type V4L2 subdev subtype Sensor flags 0
            device node name /dev/v4l-subdev0
	pad0: Source
		[fmt:SBGGR8_1X8/640x480@1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
		-> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE]

Happy reviewing!

Paul Kocialkowski (14):
  phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
  phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI
    CSI-2
  media: sun6i-csi: Support an optional dedicated memory pool
  media: sun6i-csi: Fix the image storage bpp for 10/12-bit Bayer
    formats
  media: sun6i-csi: Only configure the interface data width for parallel
  media: sun6i-csi: Support feeding from the MIPI CSI-2 controller
  dt-bindings: media: i2c: Add A31 MIPI CSI-2 bindings documentation
  media: sunxi: Add support for the A31 MIPI CSI-2 controller
  ARM: dts: sun8i: v3s: Add CSI0 camera interface node
  ARM: dts: sun8i: v3s: Add MIPI D-PHY and MIPI CSI-2 interface nodes
  dt-bindings: media: i2c: Add A83T MIPI CSI-2 bindings documentation
  media: sunxi: Add support for the A83T MIPI CSI-2 controller
  ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
  media: sunxi: sun8i-a83t-mipi-csi2: Avoid using the (unsolicited)
    interrupt

 .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 168 +++++
 .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 158 +++++
 arch/arm/boot/dts/sun8i-a83t.dtsi             |  26 +
 arch/arm/boot/dts/sun8i-v3s.dtsi              |  62 ++
 drivers/media/platform/sunxi/Kconfig          |   2 +
 drivers/media/platform/sunxi/Makefile         |   2 +
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  54 +-
 .../platform/sunxi/sun6i-csi/sun6i_csi.h      |  20 +-
 .../platform/sunxi/sun6i-mipi-csi2/Kconfig    |  11 +
 .../platform/sunxi/sun6i-mipi-csi2/Makefile   |   4 +
 .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c   | 635 +++++++++++++++++
 .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h   | 116 +++
 .../sunxi/sun8i-a83t-mipi-csi2/Kconfig        |  11 +
 .../sunxi/sun8i-a83t-mipi-csi2/Makefile       |   4 +
 .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c    |  92 +++
 .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h    |  39 ++
 .../sun8i_a83t_mipi_csi2.c                    | 660 ++++++++++++++++++
 .../sun8i_a83t_mipi_csi2.h                    | 196 ++++++
 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c   | 164 ++++-
 drivers/staging/media/rkisp1/rkisp1-isp.c     |   3 +-
 include/linux/phy/phy-mipi-dphy.h             |  13 +
 21 files changed, 2408 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
 create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
 create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
 create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
 create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
 create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h

-- 
2.28.0


^ permalink raw reply	[flat|nested] 66+ messages in thread

end of thread, back to index

Thread overview: 66+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-23 17:45 [PATCH 00/14] Allwinner MIPI CSI-2 support for A31/V3s/A83T Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 01/14] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Paul Kocialkowski
2020-10-23 18:18   ` [linux-sunxi] " Jernej Škrabec
2020-10-24  8:31     ` Paul Kocialkowski
2020-10-30 22:44   ` Helen Koike
2020-10-23 17:45 ` [PATCH 02/14] phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 Paul Kocialkowski
2020-10-26 15:38   ` Maxime Ripard
2020-10-27  9:23     ` Paul Kocialkowski
2020-10-27 18:28       ` Maxime Ripard
2020-11-04 10:53         ` Paul Kocialkowski
2020-10-30 22:44   ` Helen Koike
2020-11-04 10:54     ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 03/14] media: sun6i-csi: Support an optional dedicated memory pool Paul Kocialkowski
2020-10-26 15:41   ` Maxime Ripard
2020-10-27  9:26     ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 04/14] media: sun6i-csi: Fix the image storage bpp for 10/12-bit Bayer formats Paul Kocialkowski
2020-10-30 22:45   ` Helen Koike
2020-11-04 10:56     ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 05/14] media: sun6i-csi: Only configure the interface data width for parallel Paul Kocialkowski
2020-10-26 16:00   ` Maxime Ripard
2020-10-27  9:31     ` Paul Kocialkowski
2020-10-27 18:31       ` Maxime Ripard
2020-10-23 17:45 ` [PATCH 06/14] media: sun6i-csi: Support feeding from the MIPI CSI-2 controller Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 07/14] dt-bindings: media: i2c: Add A31 MIPI CSI-2 bindings documentation Paul Kocialkowski
2020-10-26 16:14   ` Maxime Ripard
2020-10-27  9:52     ` Paul Kocialkowski
2020-10-27 18:44       ` Maxime Ripard
2020-11-04 10:48         ` Paul Kocialkowski
2020-11-04 16:53           ` Maxime Ripard
2020-10-30 16:33   ` Rob Herring
2020-10-30 16:56   ` Sakari Ailus
2020-10-23 17:45 ` [PATCH 08/14] media: sunxi: Add support for the A31 MIPI CSI-2 controller Paul Kocialkowski
2020-10-26  8:39   ` Dan Carpenter
2020-10-26 16:54   ` Maxime Ripard
2020-11-04 11:34     ` Paul Kocialkowski
2020-11-04 18:56       ` Maxime Ripard
2020-11-05 14:52         ` Paul Kocialkowski
2020-10-30 22:45   ` Helen Koike
2020-11-02  9:21     ` Maxime Ripard
2020-11-04 11:17       ` Paul Kocialkowski
2020-11-04 16:38         ` Helen Koike
2020-11-04 18:45           ` Maxime Ripard
2020-11-05 14:14             ` Helen Koike
2020-11-05  8:45   ` Sakari Ailus
2020-11-05 14:55     ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 09/14] ARM: dts: sun8i: v3s: Add CSI0 camera interface node Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 10/14] ARM: dts: sun8i: v3s: Add MIPI D-PHY and MIPI CSI-2 interface nodes Paul Kocialkowski
2020-10-26 16:55   ` Maxime Ripard
2020-10-23 17:45 ` [PATCH 11/14] dt-bindings: media: i2c: Add A83T MIPI CSI-2 bindings documentation Paul Kocialkowski
2020-10-26 16:56   ` Maxime Ripard
2020-11-04 10:33     ` Paul Kocialkowski
2020-11-05  8:48   ` Sakari Ailus
2020-10-23 17:45 ` [PATCH 12/14] media: sunxi: Add support for the A83T MIPI CSI-2 controller Paul Kocialkowski
2020-10-26  8:53   ` Dan Carpenter
2020-10-26 17:00   ` Maxime Ripard
2020-11-04 10:37     ` Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 13/14] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node Paul Kocialkowski
2020-10-23 17:45 ` [PATCH 14/14] media: sunxi: sun8i-a83t-mipi-csi2: Avoid using the (unsolicited) interrupt Paul Kocialkowski
2020-10-26 16:57   ` Maxime Ripard
2020-10-26 17:20 ` [PATCH 00/14] Allwinner MIPI CSI-2 support for A31/V3s/A83T Maxime Ripard
2020-10-30 22:44 ` Helen Koike
2020-11-02  9:17   ` Maxime Ripard
2020-11-04 11:11   ` Paul Kocialkowski
2020-11-04 11:14     ` Paul Kocialkowski
2020-11-04 16:36     ` Helen Koike
2020-11-05 14:58       ` Paul Kocialkowski

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git