From: Sebastian Reichel <sre@kernel.org>
To: Pavel Machek <pavel@ucw.cz>
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
ivo.g.dimitrov.75@gmail.com, sakari.ailus@iki.fi,
pali.rohar@gmail.com, linux-media@vger.kernel.org
Subject: Re: [PATCHv2] dt: bindings: Add support for CSI1 bus
Date: Thu, 12 Jan 2017 00:55:35 +0100 [thread overview]
Message-ID: <20170111235535.nfvr6vzorm5unyjr@earth> (raw)
In-Reply-To: <20170111225335.GA21553@amd>
[-- Attachment #1: Type: text/plain, Size: 2366 bytes --]
Hi,
On Wed, Jan 11, 2017 at 11:53:35PM +0100, Pavel Machek wrote:
> From: Sakari Ailus <sakari.ailus@iki.fi>
>
> In the vast majority of cases the bus type is known to the driver(s)
> since a receiver or transmitter can only support a single one. There
> are cases however where different options are possible.
>
> The existing V4L2 OF support tries to figure out the bus type and
> parse the bus parameters based on that. This does not scale too well
> as there are multiple serial busses that share common properties.
>
> Some hardware also supports multiple types of busses on the same
> interfaces.
>
> Document the CSI1/CCP2 property strobe. It signifies the clock or
> strobe mode.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
> index 9cd2a36..08c4498 100644
> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> @@ -76,6 +76,11 @@ Optional endpoint properties
> mode horizontal and vertical synchronization signals are provided to the
> slave device (data source) by the master device (data sink). In the master
> mode the data source device is also the source of the synchronization signals.
> +- bus-type: data bus type. Possible values are:
> + 0 - MIPI CSI2
> + 1 - parallel / Bt656
> + 2 - MIPI CSI1
> + 3 - CCP2
> - bus-width: number of data lines actively used, valid for the parallel busses.
> - data-shift: on the parallel data busses, if bus-width is used to specify the
> number of data lines, data-shift can be used to specify which data lines are
> @@ -112,7 +117,8 @@ Optional endpoint properties
> should be the combined length of data-lanes and clock-lanes properties.
> If the lane-polarities property is omitted, the value must be interpreted
> as 0 (normal). This property is valid for serial busses only.
> -
> +- strobe: Whether the clock signal is used as clock or strobe. Used
> + with CCP2, for instance.
>
> Example
> -------
>
>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-01-11 23:55 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-28 18:30 [PATCH] dt: bindings: Add support for CSI1 bus Pavel Machek
2017-01-02 7:00 ` Sakari Ailus
2017-01-11 21:38 ` Pavel Machek
2017-01-03 20:38 ` Rob Herring
2017-01-04 8:54 ` Sakari Ailus
2017-01-11 22:06 ` Pavel Machek
2017-01-11 22:19 ` Sakari Ailus
2017-01-11 22:53 ` [PATCHv2] " Pavel Machek
2017-01-11 23:55 ` Sebastian Reichel [this message]
2017-01-12 12:06 ` Baruch Siach
2017-01-19 21:37 ` Sakari Ailus
2017-01-19 21:49 ` Sakari Ailus
2017-01-20 7:59 ` Ivaylo Dimitrov
2017-01-20 11:46 ` Sakari Ailus
2017-02-03 11:50 ` Pavel Machek
2017-02-03 14:16 ` Sakari Ailus
2017-02-06 9:53 ` Pavel Machek
2017-02-06 9:49 ` Pavel Machek
2017-02-08 8:38 ` Sakari Ailus
2017-02-08 12:57 ` [PATCH] omap3isp: add " Pavel Machek
2017-02-08 18:32 ` kbuild test robot
2017-02-08 21:03 ` Laurent Pinchart
2017-02-15 9:42 ` Pavel Machek
2017-02-20 0:59 ` Laurent Pinchart
2017-02-20 12:06 ` [PATCH] omap3isp: avoid uninitialized memory Pavel Machek
2017-02-21 11:20 ` Sakari Ailus
2017-03-01 11:45 ` [media] omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 mode Pavel Machek
2017-03-03 11:13 ` kbuild test robot
2017-03-03 21:48 ` Pavel Machek
2017-03-10 1:24 ` [kbuild-all] " Ye Xiaolong
2017-03-10 2:49 ` Fengguang Wu
2017-03-04 15:15 ` Sakari Ailus
2017-03-04 19:44 ` Pavel Machek
2017-03-02 9:01 ` [PATCH] omap3isp: add support for CSI1 bus Pavel Machek
2017-03-02 10:16 ` [PATCHv2] " Pavel Machek
2017-03-02 11:24 ` Sakari Ailus
2017-03-02 12:38 ` Pavel Machek
2017-03-03 22:17 ` Sakari Ailus
2017-03-04 13:03 ` Sakari Ailus
2017-03-04 15:39 ` Sakari Ailus
2017-03-04 18:44 ` Laurent Pinchart
2017-04-26 21:19 ` [bug] omap3isp: missing support for ENUM_FMT Pavel Machek
2017-04-28 7:59 ` Sakari Ailus
2017-03-04 22:53 ` [PATCHv2] omap3isp: add support for CSI1 bus Pavel Machek
2017-03-05 14:13 ` Pavel Machek
2017-03-06 7:23 ` [PATCH] v4l2-fwnode: Fix clock lane parsing Pavel Machek
2017-03-10 22:54 ` Sakari Ailus
2017-06-13 12:22 ` v4l2-fwnode: status, plans for merge, any branch to merge against? Pavel Machek
2017-06-13 12:47 ` Sakari Ailus
2017-06-13 21:09 ` Pavel Machek
2017-06-14 11:06 ` Sakari Ailus
2017-06-14 19:41 ` Pavel Machek
2017-06-15 22:07 ` Sakari Ailus
2017-06-16 6:23 ` Pavel Machek
2017-06-15 22:22 ` n900 camera on v4.12-rc (was Re: v4l2-fwnode: status, plans for merge, any branch to merge against?) Pavel Machek
2017-06-15 22:23 ` [PATCH] omap3isp: fix compilation Pavel Machek
2017-06-16 8:03 ` Hans Verkuil
2017-06-16 11:59 ` Sakari Ailus
2017-07-04 15:08 ` v4l2-fwnode: status, plans for merge, any branch to merge against? Pavel Machek
2017-07-05 9:32 ` Sakari Ailus
2017-07-06 10:38 ` Pavel Machek
2017-07-11 16:12 ` Sakari Ailus
2017-07-12 16:32 ` Pavel Machek
2017-07-12 20:31 ` omap3isp: is capture mode working? what hardware? was " Pavel Machek
2017-03-06 7:57 ` [RFC] omap3isp: add support for CSI1 bus Pavel Machek
2017-03-10 13:41 ` Pavel Machek
2017-04-11 18:15 ` Pavel Machek
2017-05-03 7:43 ` [PATCHv2] " Sakari Ailus
2017-05-03 19:50 ` Pavel Machek
2017-05-03 20:24 ` Pavel Machek
2017-03-02 12:45 ` [PATCH] omap3isp: wait for regulators to come up Pavel Machek
2017-03-02 14:46 ` Laurent Pinchart
2017-03-04 15:33 ` Sakari Ailus
2017-02-15 10:23 ` [PATCH] omap3isp: add support for CSI1 bus Pavel Machek
2017-02-15 16:57 ` Sebastian Reichel
2017-02-15 17:06 ` Pavel Machek
2017-02-08 23:03 ` [PATCHv2] dt: bindings: Add " Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170111235535.nfvr6vzorm5unyjr@earth \
--to=sre@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).