omap3isp: add rest of CSI1 support CSI1 needs one more bit to be set up. Do just that. Signed-off-by: Pavel Machek --- Hmm. Looking at that... num_data_lanes probably should be modified in local variable, not globally like this. Should I do that? Anything else that needs fixing? index 24a9fc5..6feba36 100644 --- a/drivers/media/platform/omap3isp/ispccp2.c +++ b/drivers/media/platform/omap3isp/ispccp2.c @@ -21,6 +23,7 @@ #include #include #include +#include #include "isp.h" #include "ispreg.h" @@ -1149,6 +1152,7 @@ int omap3isp_ccp2_init(struct isp_device *isp) "Could not get regulator vdds_csib\n"); ccp2->vdds_csib = NULL; } + ccp2->phy = &isp->isp_csiphy2; } else if (isp->revision == ISP_REVISION_15_0) { ccp2->phy = &isp->isp_csiphy1; } diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c index 50c0f64..cd6351b 100644 --- a/drivers/media/platform/omap3isp/ispcsiphy.c +++ b/drivers/media/platform/omap3isp/ispcsiphy.c @@ -197,9 +200,10 @@ static int omap3isp_csiphy_config(struct isp_csiphy *phy) } if (buscfg->interface == ISP_INTERFACE_CCP2B_PHY1 - || buscfg->interface == ISP_INTERFACE_CCP2B_PHY2) + || buscfg->interface == ISP_INTERFACE_CCP2B_PHY2) { lanes = &buscfg->bus.ccp2.lanecfg; - else + phy->num_data_lanes = 1; + } else lanes = &buscfg->bus.csi2.lanecfg; /* Clock and data lanes verification */ @@ -302,13 +306,16 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy) if (rval < 0) goto done; - rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON); - if (rval) { - regulator_disable(phy->vdd); - goto done; + if (phy->isp->revision == ISP_REVISION_15_0) { + rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON); + if (rval) { + regulator_disable(phy->vdd); + goto done; + } + + csiphy_power_autoswitch_enable(phy, true); } - csiphy_power_autoswitch_enable(phy, true); phy->phy_in_use = 1; done: -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html