[PATCH v4 0/4] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode

[PATCH v4 0/4] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode

[Niklas Söderlund]

Hi,

This series allows the TXA CSI-2 transmitter of the adv748x to function
in 1-, 2- and 4- lane mode. Currently the driver fixes the hardware in
4-lane mode. The driver looks at the standard DT property 'data-lanes'
to determine which mode it should operate in.

Patch 1/4 lists the 'data-lanes' DT property as mandatory for endpoints
describing the CSI-2 transmitters. Patch 2/4 refactors the
initialization sequence of the adv748x to be able to reuse more code.
Patch 3/4 adds the DT parsing and storing of the number of lanes. Patch
4/4 merges the TXA and TXB power up/down procedure while also taking the
configurable number of lanes into account.

The series is based on the latest media-tree master and is tested on
Renesas M3-N in 1-, 2- and 4- lane mode.

Niklas Söderlund (4):
  dt-bindings: adv748x: make data-lanes property mandatory for CSI-2
    endpoints
  i2c: adv748x: reuse power up sequence when initializing CSI-2
  i2c: adv748x: store number of CSI-2 lanes described in device tree
  i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter

 .../devicetree/bindings/media/i2c/adv748x.txt |  11 +-
 drivers/media/i2c/adv748x/adv748x-core.c      | 235 ++++++++++--------
 drivers/media/i2c/adv748x/adv748x.h           |   1 +
 3 files changed, 142 insertions(+), 105 deletions(-)

-- 
2.19.1

[PATCH v4 1/4] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints

[Niklas Söderlund]

The CSI-2 transmitters can use a different number of lanes to transmit
data. Make the data-lanes mandatory for the endpoints that describe the
transmitters as no good default can be set to fallback on.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

---
* Changes since v3
- Add paragraph to describe the accepted values for the source endpoint
  data-lane property. Thanks Jacopo for pointing this out and sorry for
  missing this in v2.
* Changes since v2
- Update paragraph according to Laurents comments.
---
 .../devicetree/bindings/media/i2c/adv748x.txt         | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 5dddc95f9cc46084..4f91686e54a6b939 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -48,7 +48,16 @@ are numbered as follows.
 	  TXA		source		10
 	  TXB		source		11
 
-The digital output port nodes must contain at least one endpoint.
+The digital output port nodes, when present, shall contain at least one
+endpoint. Each of those endpoints shall contain the data-lanes property as
+described in video-interfaces.txt.
+
+Required source endpoint properties:
+  - data-lanes: an array of physical data lane indexes
+    The accepted value(s) for this property depends on which of the two
+    sources are described. For TXA 1, 2 or 4 data lanes can be described
+    while for TXB only 1 data lane is valid. See video-interfaces.txt
+    for detailed description.
 
 Ports are optional if they are not connected to anything at the hardware level.
 
-- 
2.19.1

Re: [PATCH v4 1/4] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints

[Laurent Pinchart]

Hi Niklas,

Thank you for the patch.

On Thursday, 29 November 2018 04:01:44 EET Niklas Söderlund wrote:
> The CSI-2 transmitters can use a different number of lanes to transmit
> data. Make the data-lanes mandatory for the endpoints that describe the
> transmitters as no good default can be set to fallback on.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> * Changes since v3
> - Add paragraph to describe the accepted values for the source endpoint
>   data-lane property. Thanks Jacopo for pointing this out and sorry for
>   missing this in v2.
> * Changes since v2
> - Update paragraph according to Laurents comments.
> ---
>  .../devicetree/bindings/media/i2c/adv748x.txt         | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index
> 5dddc95f9cc46084..4f91686e54a6b939 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -48,7 +48,16 @@ are numbered as follows.
>  	  TXA		source		10
>  	  TXB		source		11
> 
> -The digital output port nodes must contain at least one endpoint.
> +The digital output port nodes, when present, shall contain at least one
> +endpoint. Each of those endpoints shall contain the data-lanes property as
> +described in video-interfaces.txt.
> +
> +Required source endpoint properties:
> +  - data-lanes: an array of physical data lane indexes
> +    The accepted value(s) for this property depends on which of the two
> +    sources are described. For TXA 1, 2 or 4 data lanes can be described
> +    while for TXB only 1 data lane is valid. See video-interfaces.txt
> +    for detailed description.
> 
>  Ports are optional if they are not connected to anything at the hardware
> level.


-- 
Regards,

Laurent Pinchart

Re: [PATCH v4 1/4] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints

[Rob Herring]

On Thu, 29 Nov 2018 03:01:44 +0100, =?UTF-8?q?Niklas=20S=C3=B6derlund?=          wrote:
> The CSI-2 transmitters can use a different number of lanes to transmit
> data. Make the data-lanes mandatory for the endpoints that describe the
> transmitters as no good default can be set to fallback on.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> ---
> * Changes since v3
> - Add paragraph to describe the accepted values for the source endpoint
>   data-lane property. Thanks Jacopo for pointing this out and sorry for
>   missing this in v2.
> * Changes since v2
> - Update paragraph according to Laurents comments.
> ---
>  .../devicetree/bindings/media/i2c/adv748x.txt         | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 1/4] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints

[Kieran Bingham]

Hi Niklas,

Thank you for this series.

On 29/11/2018 02:01, Niklas Söderlund wrote:
> The CSI-2 transmitters can use a different number of lanes to transmit
> data. Make the data-lanes mandatory for the endpoints that describe the
> transmitters as no good default can be set to fallback on.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> 
> ---
> * Changes since v3
> - Add paragraph to describe the accepted values for the source endpoint
>   data-lane property. Thanks Jacopo for pointing this out and sorry for
>   missing this in v2.
> * Changes since v2
> - Update paragraph according to Laurents comments.
> ---
>  .../devicetree/bindings/media/i2c/adv748x.txt         | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> index 5dddc95f9cc46084..4f91686e54a6b939 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -48,7 +48,16 @@ are numbered as follows.
>  	  TXA		source		10
>  	  TXB		source		11
>  
> -The digital output port nodes must contain at least one endpoint.
> +The digital output port nodes, when present, shall contain at least one
> +endpoint. Each of those endpoints shall contain the data-lanes property as
> +described in video-interfaces.txt.
> +
> +Required source endpoint properties:
> +  - data-lanes: an array of physical data lane indexes
> +    The accepted value(s) for this property depends on which of the two
> +    sources are described. For TXA 1, 2 or 4 data lanes can be described
> +    while for TXB only 1 data lane is valid. See video-interfaces.txt
> +    for detailed description.
>  
>  Ports are optional if they are not connected to anything at the hardware level.
>  
> 

-- 
Regards
--
Kieran

[PATCH v4 2/4] i2c: adv748x: reuse power up sequence when initializing CSI-2

[Niklas Söderlund]

Extend the MIPI CSI-2 power up sequence to match the power up sequence
in the hardware manual chapter "9.5.1 Power Up Sequence". This change
allows the power up functions to be reused when initializing the
hardware reducing code duplicating as well aligning with the
documentation.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

---
* Changes since v2
- Bring in the undocumented registers in the power on sequence from the
  initialization sequence after confirming in the hardware manual that
  this is the correct behavior.
---
 drivers/media/i2c/adv748x/adv748x-core.c | 50 ++++++------------------
 1 file changed, 13 insertions(+), 37 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 6854d898fdd1f192..2384f50dacb0ccff 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -234,6 +234,12 @@ static const struct adv748x_reg_value adv748x_power_up_txa_4lane[] = {
 
 	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
 	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
+	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
+	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
+	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
+	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
+	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
+	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
 
 	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
 	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
@@ -263,6 +269,11 @@ static const struct adv748x_reg_value adv748x_power_up_txb_1lane[] = {
 
 	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
 	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
+	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
+	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
+	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
+	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
+	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
 
 	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
 	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
@@ -383,25 +394,6 @@ static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
 	{ADV748X_PAGE_IO, 0x0c, 0xe0},	/* Enable LLC_DLL & Double LLC Timing */
 	{ADV748X_PAGE_IO, 0x0e, 0xdd},	/* LLC/PIX/SPI PINS TRISTATED AUD */
 
-	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
-	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
-	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
-
-	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
-	{ADV748X_PAGE_TXA, 0x00, 0x24 },/* Power-up CSI-TX */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXA, 0xc1, 0x2b},	/* ADI Required Write */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXA, 0x31, 0x80},	/* ADI Required Write */
-
 	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
 };
 
@@ -435,24 +427,6 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
 	{ADV748X_PAGE_SDP, 0x31, 0x12},	/* ADI Required Write */
 	{ADV748X_PAGE_SDP, 0xe6, 0x4f},  /* V bit end pos manually in NTSC */
 
-	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
-	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
-	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
-	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-
-	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
-	{ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXB, 0xc1, 0x2b},	/* ADI Required Write */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXB, 0x31, 0x80},	/* ADI Required Write */
-
 	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
 };
 
@@ -474,6 +448,7 @@ static int adv748x_reset(struct adv748x_state *state)
 	if (ret)
 		return ret;
 
+	adv748x_tx_power(&state->txa, 1);
 	adv748x_tx_power(&state->txa, 0);
 
 	/* Init and power down TXB */
@@ -481,6 +456,7 @@ static int adv748x_reset(struct adv748x_state *state)
 	if (ret)
 		return ret;
 
+	adv748x_tx_power(&state->txb, 1);
 	adv748x_tx_power(&state->txb, 0);
 
 	/* Disable chip powerdown & Enable HDMI Rx block */
-- 
2.19.1

Re: [PATCH v4 2/4] i2c: adv748x: reuse power up sequence when initializing CSI-2

[Kieran Bingham]

Hi Niklas,

On 29/11/2018 02:01, Niklas Söderlund wrote:
> Extend the MIPI CSI-2 power up sequence to match the power up sequence
> in the hardware manual chapter "9.5.1 Power Up Sequence". This change
> allows the power up functions to be reused when initializing the
> hardware reducing code duplicating as well aligning with the
> documentation.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> 
> ---
> * Changes since v2
> - Bring in the undocumented registers in the power on sequence from the
>   initialization sequence after confirming in the hardware manual that
>   this is the correct behavior.
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 50 ++++++------------------
>  1 file changed, 13 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 6854d898fdd1f192..2384f50dacb0ccff 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -234,6 +234,12 @@ static const struct adv748x_reg_value adv748x_power_up_txa_4lane[] = {
>  
>  	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
>  	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
> +	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
>  
>  	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
>  	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
> @@ -263,6 +269,11 @@ static const struct adv748x_reg_value adv748x_power_up_txb_1lane[] = {
>  
>  	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
>  	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
> +	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
> +	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
>  
>  	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
>  	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
> @@ -383,25 +394,6 @@ static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
>  	{ADV748X_PAGE_IO, 0x0c, 0xe0},	/* Enable LLC_DLL & Double LLC Timing */
>  	{ADV748X_PAGE_IO, 0x0e, 0xdd},	/* LLC/PIX/SPI PINS TRISTATED AUD */
>  
> -	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
> -	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
> -	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
> -
> -	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXA, 0x00, 0x24 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0x31, 0x80},	/* ADI Required Write */
> -
>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>  };
>  
> @@ -435,24 +427,6 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
>  	{ADV748X_PAGE_SDP, 0x31, 0x12},	/* ADI Required Write */
>  	{ADV748X_PAGE_SDP, 0xe6, 0x4f},  /* V bit end pos manually in NTSC */
>  
> -	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
> -	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
> -	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
> -	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0x31, 0x80},	/* ADI Required Write */
> -
>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>  };
>  
> @@ -474,6 +448,7 @@ static int adv748x_reset(struct adv748x_state *state)
>  	if (ret)
>  		return ret;
>  
> +	adv748x_tx_power(&state->txa, 1);
>  	adv748x_tx_power(&state->txa, 0);
>  
>  	/* Init and power down TXB */
> @@ -481,6 +456,7 @@ static int adv748x_reset(struct adv748x_state *state)
>  	if (ret)
>  		return ret;
>  
> +	adv748x_tx_power(&state->txb, 1);
>  	adv748x_tx_power(&state->txb, 0);
>  
>  	/* Disable chip powerdown & Enable HDMI Rx block */
> 

-- 
Regards
--
Kieran

[PATCH v4 3/4] i2c: adv748x: store number of CSI-2 lanes described in device tree

[Niklas Söderlund]

The adv748x CSI-2 transmitters TXA and TXB can use different number of
lanes to transmit data. In order to be able to configure the device
correctly this information need to be parsed from device tree and stored
in each TX private data structure.

TXA supports 1, 2 and 4 lanes while TXB supports 1 lane.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

---
* Changes since v2
- Rebase to latest media-tree requires the bus_type filed in struct
  v4l2_fwnode_endpoint to be initialized, set it to V4L2_MBUS_CSI2_DPHY.

* Changes since v1
- Use %u instead of %d to print unsigned int.
- Fix spelling in commit message, thanks Laurent.
---
 drivers/media/i2c/adv748x/adv748x-core.c | 50 ++++++++++++++++++++++++
 drivers/media/i2c/adv748x/adv748x.h      |  1 +
 2 files changed, 51 insertions(+)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 2384f50dacb0ccff..9d80d7f3062b16bc 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -23,6 +23,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-dv-timings.h>
+#include <media/v4l2-fwnode.h>
 #include <media/v4l2-ioctl.h>
 
 #include "adv748x.h"
@@ -521,12 +522,56 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
 	sd->entity.ops = &adv748x_media_ops;
 }
 
+static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
+				    unsigned int port,
+				    struct device_node *ep)
+{
+	struct v4l2_fwnode_endpoint vep;
+	unsigned int num_lanes;
+	int ret;
+
+	if (port != ADV748X_PORT_TXA && port != ADV748X_PORT_TXB)
+		return 0;
+
+	vep.bus_type = V4L2_MBUS_CSI2_DPHY;
+	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &vep);
+	if (ret)
+		return ret;
+
+	num_lanes = vep.bus.mipi_csi2.num_data_lanes;
+
+	if (vep.base.port == ADV748X_PORT_TXA) {
+		if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4) {
+			adv_err(state, "TXA: Invalid number (%u) of lanes\n",
+				num_lanes);
+			return -EINVAL;
+		}
+
+		state->txa.num_lanes = num_lanes;
+		adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
+	}
+
+	if (vep.base.port == ADV748X_PORT_TXB) {
+		if (num_lanes != 1) {
+			adv_err(state, "TXB: Invalid number (%u) of lanes\n",
+				num_lanes);
+			return -EINVAL;
+		}
+
+		state->txb.num_lanes = num_lanes;
+		adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
+	}
+
+	return 0;
+}
+
 static int adv748x_parse_dt(struct adv748x_state *state)
 {
 	struct device_node *ep_np = NULL;
 	struct of_endpoint ep;
 	bool out_found = false;
 	bool in_found = false;
+	int ret;
 
 	for_each_endpoint_of_node(state->dev->of_node, ep_np) {
 		of_graph_parse_endpoint(ep_np, &ep);
@@ -557,6 +602,11 @@ static int adv748x_parse_dt(struct adv748x_state *state)
 			in_found = true;
 		else
 			out_found = true;
+
+		/* Store number of CSI-2 lanes used for TXA and TXB. */
+		ret = adv748x_parse_csi2_lanes(state, ep.port, ep_np);
+		if (ret)
+			return ret;
 	}
 
 	return in_found && out_found ? 0 : -ENODEV;
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 39c2fdc3b41667d8..b482c7fe6957eb85 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -79,6 +79,7 @@ struct adv748x_csi2 {
 	struct v4l2_mbus_framefmt format;
 	unsigned int page;
 	unsigned int port;
+	unsigned int num_lanes;
 
 	struct media_pad pads[ADV748X_CSI2_NR_PADS];
 	struct v4l2_ctrl_handler ctrl_hdl;
-- 
2.19.1

Re: [PATCH v4 3/4] i2c: adv748x: store number of CSI-2 lanes described in device tree

[Kieran Bingham]

Hi Niklas,

On 29/11/2018 02:01, Niklas Söderlund wrote:
> The adv748x CSI-2 transmitters TXA and TXB can use different number of
> lanes to transmit data. In order to be able to configure the device
> correctly this information need to be parsed from device tree and stored
> in each TX private data structure.
> 
> TXA supports 1, 2 and 4 lanes while TXB supports 1 lane.
> 

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

> 
> ---
> * Changes since v2
> - Rebase to latest media-tree requires the bus_type filed in struct
>   v4l2_fwnode_endpoint to be initialized, set it to V4L2_MBUS_CSI2_DPHY.
> 
> * Changes since v1
> - Use %u instead of %d to print unsigned int.
> - Fix spelling in commit message, thanks Laurent.
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 50 ++++++++++++++++++++++++
>  drivers/media/i2c/adv748x/adv748x.h      |  1 +
>  2 files changed, 51 insertions(+)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 2384f50dacb0ccff..9d80d7f3062b16bc 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -23,6 +23,7 @@
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-dv-timings.h>
> +#include <media/v4l2-fwnode.h>
>  #include <media/v4l2-ioctl.h>
>  
>  #include "adv748x.h"
> @@ -521,12 +522,56 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
>  	sd->entity.ops = &adv748x_media_ops;
>  }
>  
> +static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
> +				    unsigned int port,
> +				    struct device_node *ep)
> +{
> +	struct v4l2_fwnode_endpoint vep;
> +	unsigned int num_lanes;
> +	int ret;
> +
> +	if (port != ADV748X_PORT_TXA && port != ADV748X_PORT_TXB)
> +		return 0;
> +
> +	vep.bus_type = V4L2_MBUS_CSI2_DPHY;
> +	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &vep);
> +	if (ret)
> +		return ret;
> +
> +	num_lanes = vep.bus.mipi_csi2.num_data_lanes;
> +
> +	if (vep.base.port == ADV748X_PORT_TXA) {
> +		if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4) {
> +			adv_err(state, "TXA: Invalid number (%u) of lanes\n",
> +				num_lanes);
> +			return -EINVAL;
> +		}
> +
> +		state->txa.num_lanes = num_lanes;
> +		adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
> +	}
> +
> +	if (vep.base.port == ADV748X_PORT_TXB) {
> +		if (num_lanes != 1) {
> +			adv_err(state, "TXB: Invalid number (%u) of lanes\n",
> +				num_lanes);
> +			return -EINVAL;
> +		}
> +
> +		state->txb.num_lanes = num_lanes;
> +		adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
> +	}
> +
> +	return 0;
> +}
> +
>  static int adv748x_parse_dt(struct adv748x_state *state)
>  {
>  	struct device_node *ep_np = NULL;
>  	struct of_endpoint ep;
>  	bool out_found = false;
>  	bool in_found = false;
> +	int ret;
>  
>  	for_each_endpoint_of_node(state->dev->of_node, ep_np) {
>  		of_graph_parse_endpoint(ep_np, &ep);
> @@ -557,6 +602,11 @@ static int adv748x_parse_dt(struct adv748x_state *state)
>  			in_found = true;
>  		else
>  			out_found = true;
> +
> +		/* Store number of CSI-2 lanes used for TXA and TXB. */
> +		ret = adv748x_parse_csi2_lanes(state, ep.port, ep_np);
> +		if (ret)
> +			return ret;
>  	}
>  
>  	return in_found && out_found ? 0 : -ENODEV;
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index 39c2fdc3b41667d8..b482c7fe6957eb85 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -79,6 +79,7 @@ struct adv748x_csi2 {
>  	struct v4l2_mbus_framefmt format;
>  	unsigned int page;
>  	unsigned int port;
> +	unsigned int num_lanes;
>  
>  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
>  	struct v4l2_ctrl_handler ctrl_hdl;
> 

-- 
Regards
--
Kieran

[PATCH v4 4/4] i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter

[Niklas Söderlund]

The driver fixed the TXA CSI-2 transmitter in 4-lane mode while it could
operate using 1-, 2- and 4-lanes. Update the driver to support all
available modes.

The driver makes use of large tables of static register/value writes
when powering up/down the TXA and TXB transmitters which include the
write to the NUM_LANES register. By converting the tables into functions
and using parameters the power up/down functions for TXA and TXB power
up/down can be merged and used for both transmitters.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

---
* Changes since v3
- Fix spelling in commit message, thanks Laurent!
* Changes since v2
- Fix typos in comments.
- Remove unneeded boiler plait code in adv748x_tx_power() as suggested
  by Jacopo and Laurent.
- Take into account the two different register used when powering up TXA
  and TXB due to an earlier patch in this series aligns the power
  sequence with the manual.

* Changes since v1
- Convert tables of register/value writes into functions instead of
  intercepting and modifying the writes to the NUM_LANES register.
---
 drivers/media/i2c/adv748x/adv748x-core.c | 157 ++++++++++++-----------
 1 file changed, 79 insertions(+), 78 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 9d80d7f3062b16bc..d94c63cb6a2efdba 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -125,6 +125,16 @@ int adv748x_write(struct adv748x_state *state, u8 page, u8 reg, u8 value)
 	return regmap_write(state->regmap[page], reg, value);
 }
 
+static int adv748x_write_check(struct adv748x_state *state, u8 page, u8 reg,
+			       u8 value, int *error)
+{
+	if (*error)
+		return *error;
+
+	*error = adv748x_write(state, page, reg, value);
+	return *error;
+}
+
 /* adv748x_write_block(): Write raw data with a maximum of I2C_SMBUS_BLOCK_MAX
  * size to one or more registers.
  *
@@ -231,79 +241,77 @@ static int adv748x_write_regs(struct adv748x_state *state,
  * TXA and TXB
  */
 
-static const struct adv748x_reg_value adv748x_power_up_txa_4lane[] = {
-
-	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
-	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
-	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
-
-	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
-	{ADV748X_PAGE_TXA, 0x00, 0x24 },/* Power-up CSI-TX */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXA, 0xc1, 0x2b},	/* ADI Required Write */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXA, 0x31, 0x80},	/* ADI Required Write */
-
-	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
-};
-
-static const struct adv748x_reg_value adv748x_power_down_txa_4lane[] = {
-
-	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x1e, 0x00},	/* ADI Required Write */
-	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
-	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-	{ADV748X_PAGE_TXA, 0xc1, 0x3b},	/* ADI Required Write */
-
-	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
-};
-
-static const struct adv748x_reg_value adv748x_power_up_txb_1lane[] = {
-
-	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
-	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
-	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
-
-	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
-	{ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXB, 0xc1, 0x2b},	/* ADI Required Write */
-	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
-	{ADV748X_PAGE_TXB, 0x31, 0x80},	/* ADI Required Write */
-
-	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
-};
-
-static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
-
-	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x1e, 0x00},	/* ADI Required Write */
-	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
-	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
-	{ADV748X_PAGE_TXB, 0xc1, 0x3b},	/* ADI Required Write */
-
-	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
-};
+static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
+{
+	struct adv748x_state *state = tx->state;
+	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
+	int ret = 0;
+
+	/* Enable n-lane MIPI */
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+
+	/* Set Auto DPHY Timing */
+	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
+
+	/* ADI Required Write */
+	if (is_txa(tx)) {
+		adv748x_write_check(state, page, 0xdb, 0x10, &ret);
+		adv748x_write_check(state, page, 0xd6, 0x07, &ret);
+	} else {
+		adv748x_write_check(state, page, 0xd2, 0x40, &ret);
+	}
+
+	adv748x_write_check(state, page, 0xc4, 0x0a, &ret);
+	adv748x_write_check(state, page, 0x71, 0x33, &ret);
+	adv748x_write_check(state, page, 0x72, 0x11, &ret);
+
+	/* i2c_dphy_pwdn - 1'b0 */
+	adv748x_write_check(state, page, 0xf0, 0x00, &ret);
+
+	/* ADI Required Writes*/
+	adv748x_write_check(state, page, 0x31, 0x82, &ret);
+	adv748x_write_check(state, page, 0x1e, 0x40, &ret);
+
+	/* i2c_mipi_pll_en - 1'b1 */
+	adv748x_write_check(state, page, 0xda, 0x01, &ret);
+	usleep_range(2000, 2500);
+
+	/* Power-up CSI-TX */
+	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
+	usleep_range(1000, 1500);
+
+	/* ADI Required Writes */
+	adv748x_write_check(state, page, 0xc1, 0x2b, &ret);
+	usleep_range(1000, 1500);
+	adv748x_write_check(state, page, 0x31, 0x80, &ret);
+
+	return ret;
+}
+
+static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
+{
+	struct adv748x_state *state = tx->state;
+	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
+	int ret = 0;
+
+	/* ADI Required Writes */
+	adv748x_write_check(state, page, 0x31, 0x82, &ret);
+	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
+
+	/* Enable n-lane MIPI */
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+
+	/* i2c_mipi_pll_en - 1'b1 */
+	adv748x_write_check(state, page, 0xda, 0x01, &ret);
+
+	/* ADI Required Write */
+	adv748x_write_check(state, page, 0xc1, 0x3b, &ret);
+
+	return ret;
+}
 
 int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
 {
-	struct adv748x_state *state = tx->state;
-	const struct adv748x_reg_value *reglist;
 	int val;
 
 	if (!is_tx_enabled(tx))
@@ -321,14 +329,7 @@ int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
 	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
 			"Enabling with unknown bit set");
 
-	if (on)
-		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
-				       adv748x_power_up_txb_1lane;
-	else
-		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
-				       adv748x_power_down_txb_1lane;
-
-	return adv748x_write_regs(state, reglist);
+	return on ? adv748x_power_up_tx(tx) : adv748x_power_down_tx(tx);
 }
 
 /* -----------------------------------------------------------------------------
-- 
2.19.1

Re: [PATCH v4 4/4] i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter

[Kieran Bingham]

Hi Niklas,

On 29/11/2018 02:01, Niklas Söderlund wrote:
> The driver fixed the TXA CSI-2 transmitter in 4-lane mode while it could
> operate using 1-, 2- and 4-lanes. Update the driver to support all
> available modes.
> 
> The driver makes use of large tables of static register/value writes
> when powering up/down the TXA and TXB transmitters which include the
> write to the NUM_LANES register. By converting the tables into functions
> and using parameters the power up/down functions for TXA and TXB power
> up/down can be merged and used for both transmitters.
> 

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> 
> ---
> * Changes since v3
> - Fix spelling in commit message, thanks Laurent!
> * Changes since v2
> - Fix typos in comments.
> - Remove unneeded boiler plait code in adv748x_tx_power() as suggested
>   by Jacopo and Laurent.
> - Take into account the two different register used when powering up TXA
>   and TXB due to an earlier patch in this series aligns the power
>   sequence with the manual.
> 
> * Changes since v1
> - Convert tables of register/value writes into functions instead of
>   intercepting and modifying the writes to the NUM_LANES register.
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 157 ++++++++++++-----------
>  1 file changed, 79 insertions(+), 78 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 9d80d7f3062b16bc..d94c63cb6a2efdba 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -125,6 +125,16 @@ int adv748x_write(struct adv748x_state *state, u8 page, u8 reg, u8 value)
>  	return regmap_write(state->regmap[page], reg, value);
>  }
>  
> +static int adv748x_write_check(struct adv748x_state *state, u8 page, u8 reg,
> +			       u8 value, int *error)
> +{
> +	if (*error)
> +		return *error;
> +
> +	*error = adv748x_write(state, page, reg, value);
> +	return *error;
> +}
> +
>  /* adv748x_write_block(): Write raw data with a maximum of I2C_SMBUS_BLOCK_MAX
>   * size to one or more registers.
>   *
> @@ -231,79 +241,77 @@ static int adv748x_write_regs(struct adv748x_state *state,
>   * TXA and TXB
>   */
>  
> -static const struct adv748x_reg_value adv748x_power_up_txa_4lane[] = {
> -
> -	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
> -	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
> -	{ADV748X_PAGE_TXA, 0xdb, 0x10},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xd6, 0x07},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xc4, 0x0a},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x71, 0x33},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x72, 0x11},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
> -
> -	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXA, 0x00, 0x24 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0x31, 0x80},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_down_txa_4lane[] = {
> -
> -	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x1e, 0x00},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
> -	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_TXA, 0xc1, 0x3b},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_up_txb_1lane[] = {
> -
> -	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
> -	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
> -	{ADV748X_PAGE_TXB, 0xd2, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xc4, 0x0a},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x71, 0x33},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x72, 0x11},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xf0, 0x00},	/* i2c_dphy_pwdn - 1'b0 */
> -
> -	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0x31, 0x80},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
> -
> -	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x1e, 0x00},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
> -	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_TXB, 0xc1, 0x3b},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> +static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
> +{
> +	struct adv748x_state *state = tx->state;
> +	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> +	int ret = 0;
> +
> +	/* Enable n-lane MIPI */
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +
> +	/* Set Auto DPHY Timing */
> +	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
> +
> +	/* ADI Required Write */
> +	if (is_txa(tx)) {
> +		adv748x_write_check(state, page, 0xdb, 0x10, &ret);
> +		adv748x_write_check(state, page, 0xd6, 0x07, &ret);
> +	} else {
> +		adv748x_write_check(state, page, 0xd2, 0x40, &ret);
> +	}
> +
> +	adv748x_write_check(state, page, 0xc4, 0x0a, &ret);
> +	adv748x_write_check(state, page, 0x71, 0x33, &ret);
> +	adv748x_write_check(state, page, 0x72, 0x11, &ret);
> +
> +	/* i2c_dphy_pwdn - 1'b0 */
> +	adv748x_write_check(state, page, 0xf0, 0x00, &ret);
> +
> +	/* ADI Required Writes*/
> +	adv748x_write_check(state, page, 0x31, 0x82, &ret);
> +	adv748x_write_check(state, page, 0x1e, 0x40, &ret);
> +
> +	/* i2c_mipi_pll_en - 1'b1 */
> +	adv748x_write_check(state, page, 0xda, 0x01, &ret);
> +	usleep_range(2000, 2500);
> +
> +	/* Power-up CSI-TX */
> +	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
> +	usleep_range(1000, 1500);
> +
> +	/* ADI Required Writes */
> +	adv748x_write_check(state, page, 0xc1, 0x2b, &ret);
> +	usleep_range(1000, 1500);
> +	adv748x_write_check(state, page, 0x31, 0x80, &ret);
> +
> +	return ret;
> +}
> +
> +static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
> +{
> +	struct adv748x_state *state = tx->state;
> +	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> +	int ret = 0;
> +
> +	/* ADI Required Writes */
> +	adv748x_write_check(state, page, 0x31, 0x82, &ret);
> +	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
> +
> +	/* Enable n-lane MIPI */
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +
> +	/* i2c_mipi_pll_en - 1'b1 */
> +	adv748x_write_check(state, page, 0xda, 0x01, &ret);
> +
> +	/* ADI Required Write */
> +	adv748x_write_check(state, page, 0xc1, 0x3b, &ret);
> +
> +	return ret;
> +}
>  
>  int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
>  {
> -	struct adv748x_state *state = tx->state;
> -	const struct adv748x_reg_value *reglist;
>  	int val;
>  
>  	if (!is_tx_enabled(tx))
> @@ -321,14 +329,7 @@ int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
>  	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
>  			"Enabling with unknown bit set");
>  
> -	if (on)
> -		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
> -				       adv748x_power_up_txb_1lane;
> -	else
> -		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
> -				       adv748x_power_down_txb_1lane;
> -
> -	return adv748x_write_regs(state, reglist);
> +	return on ? adv748x_power_up_tx(tx) : adv748x_power_down_tx(tx);
>  }
>  
>  /* -----------------------------------------------------------------------------
> 

-- 
Regards
--
Kieran

Re: [PATCH v4 0/4] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode

[Kieran Bingham]

Hi Niklas,

Thank you for this series. I think it really helps towards breaking down
those pre-defined tables of register data.

--
Kieran


On 29/11/2018 02:01, Niklas Söderlund wrote:
> Hi,
> 
> This series allows the TXA CSI-2 transmitter of the adv748x to function
> in 1-, 2- and 4- lane mode. Currently the driver fixes the hardware in
> 4-lane mode. The driver looks at the standard DT property 'data-lanes'
> to determine which mode it should operate in.
> 
> Patch 1/4 lists the 'data-lanes' DT property as mandatory for endpoints
> describing the CSI-2 transmitters. Patch 2/4 refactors the
> initialization sequence of the adv748x to be able to reuse more code.
> Patch 3/4 adds the DT parsing and storing of the number of lanes. Patch
> 4/4 merges the TXA and TXB power up/down procedure while also taking the
> configurable number of lanes into account.
> 
> The series is based on the latest media-tree master and is tested on
> Renesas M3-N in 1-, 2- and 4- lane mode.
> 
> Niklas Söderlund (4):
>   dt-bindings: adv748x: make data-lanes property mandatory for CSI-2
>     endpoints
>   i2c: adv748x: reuse power up sequence when initializing CSI-2
>   i2c: adv748x: store number of CSI-2 lanes described in device tree
>   i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter
> 
>  .../devicetree/bindings/media/i2c/adv748x.txt |  11 +-
>  drivers/media/i2c/adv748x/adv748x-core.c      | 235 ++++++++++--------
>  drivers/media/i2c/adv748x/adv748x.h           |   1 +
>  3 files changed, 142 insertions(+), 105 deletions(-)
> 

-- 
Regards
--
Kieran