From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: laurent.pinchart@ideasonboard.com,
kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M
Date: Mon, 10 Dec 2018 16:24:50 +0100 [thread overview]
Message-ID: <20181210152450.GJ17972@bigcity.dyn.berto.se> (raw)
In-Reply-To: <1544453635-16359-1-git-send-email-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thanks for fixing this.
On 2018-12-10 15:53:55 +0100, Jacopo Mondi wrote:
> The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks for
> lower bound of the interval used to match the desired bandwidth. Use that
> in place of the currently used upport bound.
>
> Fixes: 10c08812fe60 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables")
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++++---------------
> 1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index 80ad906d1136..7e9cb8bcfe70 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = {
> };
>
> static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
> - { .mbps = 89, .reg = 0x00 },
> - { .mbps = 99, .reg = 0x20 },
> - { .mbps = 109, .reg = 0x40 },
> - { .mbps = 129, .reg = 0x02 },
> - { .mbps = 139, .reg = 0x22 },
> - { .mbps = 149, .reg = 0x42 },
> - { .mbps = 169, .reg = 0x04 },
> - { .mbps = 179, .reg = 0x24 },
> - { .mbps = 199, .reg = 0x44 },
> - { .mbps = 219, .reg = 0x06 },
> - { .mbps = 239, .reg = 0x26 },
> - { .mbps = 249, .reg = 0x46 },
> - { .mbps = 269, .reg = 0x08 },
> - { .mbps = 299, .reg = 0x28 },
> - { .mbps = 329, .reg = 0x0a },
> - { .mbps = 359, .reg = 0x2a },
> - { .mbps = 399, .reg = 0x4a },
> - { .mbps = 449, .reg = 0x0c },
> - { .mbps = 499, .reg = 0x2c },
> - { .mbps = 549, .reg = 0x0e },
> - { .mbps = 599, .reg = 0x2e },
> - { .mbps = 649, .reg = 0x10 },
> - { .mbps = 699, .reg = 0x30 },
> - { .mbps = 749, .reg = 0x12 },
> - { .mbps = 799, .reg = 0x32 },
> - { .mbps = 849, .reg = 0x52 },
> - { .mbps = 899, .reg = 0x72 },
> - { .mbps = 949, .reg = 0x14 },
> - { .mbps = 999, .reg = 0x34 },
> - { .mbps = 1049, .reg = 0x54 },
> - { .mbps = 1099, .reg = 0x74 },
> + { .mbps = 80, .reg = 0x00 },
> + { .mbps = 90, .reg = 0x20 },
> + { .mbps = 100, .reg = 0x40 },
> + { .mbps = 110, .reg = 0x02 },
> + { .mbps = 130, .reg = 0x22 },
> + { .mbps = 140, .reg = 0x42 },
> + { .mbps = 150, .reg = 0x04 },
> + { .mbps = 170, .reg = 0x24 },
> + { .mbps = 180, .reg = 0x44 },
> + { .mbps = 200, .reg = 0x06 },
> + { .mbps = 220, .reg = 0x26 },
> + { .mbps = 240, .reg = 0x46 },
> + { .mbps = 250, .reg = 0x08 },
> + { .mbps = 270, .reg = 0x28 },
> + { .mbps = 300, .reg = 0x0a },
> + { .mbps = 330, .reg = 0x2a },
> + { .mbps = 360, .reg = 0x4a },
> + { .mbps = 400, .reg = 0x0c },
> + { .mbps = 450, .reg = 0x2c },
> + { .mbps = 500, .reg = 0x0e },
> + { .mbps = 550, .reg = 0x2e },
> + { .mbps = 600, .reg = 0x10 },
> + { .mbps = 650, .reg = 0x30 },
> + { .mbps = 700, .reg = 0x12 },
> + { .mbps = 750, .reg = 0x32 },
> + { .mbps = 800, .reg = 0x52 },
> + { .mbps = 850, .reg = 0x72 },
> + { .mbps = 900, .reg = 0x14 },
> + { .mbps = 950, .reg = 0x34 },
> + { .mbps = 1000, .reg = 0x54 },
> + { .mbps = 1050, .reg = 0x74 },
> { .mbps = 1125, .reg = 0x16 },
> { /* sentinel */ },
> };
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
next prev parent reply other threads:[~2018-12-10 15:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 14:53 [PATCH] media: rcar-csi2: Fix PHTW table values for E3/V3M Jacopo Mondi
2018-12-10 15:24 ` Niklas Söderlund [this message]
2018-12-10 20:16 ` Laurent Pinchart
2018-12-11 2:01 ` Niklas Söderlund
2018-12-11 7:49 ` Laurent Pinchart
2018-12-11 11:33 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210152450.GJ17972@bigcity.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).