From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D14E2C43387 for ; Wed, 9 Jan 2019 00:17:07 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8A25E20883 for ; Wed, 9 Jan 2019 00:17:07 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="ry9YYp2Y" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729336AbfAIAQG (ORCPT ); Tue, 8 Jan 2019 19:16:06 -0500 Received: from mail-pf1-f194.google.com ([209.85.210.194]:36465 "EHLO mail-pf1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727917AbfAIAQF (ORCPT ); Tue, 8 Jan 2019 19:16:05 -0500 Received: by mail-pf1-f194.google.com with SMTP id b85so2733908pfc.3; Tue, 08 Jan 2019 16:16:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=MBi5JXMF6IAoyZuiQMt08z0S53KWX73DIBDJGZRLFh4=; b=ry9YYp2YWHrxucrdzBHO8CgeYDKRjHS/3IWTbwsvrhKUXsZGanzVWjHETyk8MgilJX 45p1b9W2dRgW6u5Mw2rZG9VbXExqhQYnVa5pv1g59E/oRLLmM0zS7tFQqhusTfo7jSKD QvnZBuI8mfq7xzAG7s3LD5hWGpAf6wfzQhIQyNGwed07yBTFLxJXmVhRc5Ku9D3h7unj I0xmQ75lRwZ9n1eAf0oiZz8S7609FwfiN/RFkTU9xb2FSDjfUPlwQyFmcaas98qogJAB grgBI2tHVVY8M/4k2pDXR87fMSYqn6nkaHOTAWkPD5lS2mMmXzoiaFp0DTt7arpNAnvJ 5Kgg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=MBi5JXMF6IAoyZuiQMt08z0S53KWX73DIBDJGZRLFh4=; b=PrCSrpffLGv0EZ/h/O7Px90g6ohja76u5Q5tACf3XxUeTE//PWT8co+mPJq9KacJcs hhnSLOTxb2mLoz52ir0V/PM2i4uMyjIved2IdZac3YuyNYahwy36K/Vidv926sDh/W0m JbLRbOECrTmWoSSIX5tF3i8wtDPx2JWVKtGsNZ2ZidX0LxhEeY/DBkSh9mMP/nXTAnKd 9Scbx3/H25TUlepKXljZrsZh5H3Lf6eZsdwelGZXZo06cjBaF/w395JqTco3jmvlr+bb 18GAC/gk2NvMTTEDxkqpKr8XDVofwOTK0de4jseIwyEG30prg/28TLYs5RW8QyDCiOxz KO3w== X-Gm-Message-State: AJcUukeqdiWtDEDTOJqvlK3bXJ2dAa/JLXBfmPH87EmERpNU13kKX0TX HPrpBwLDYce/SG50p+eEG8UMkoc2 X-Google-Smtp-Source: ALg8bN6UcmFnysHEVfh2NWnX8zBpEuRef1X6ZgLJ/nCiF7BS6lb8Kh8Tt6sRx8BdHhEW0oUSJ6fUaw== X-Received: by 2002:a63:ae01:: with SMTP id q1mr3339133pgf.402.1546992962442; Tue, 08 Jan 2019 16:16:02 -0800 (PST) Received: from majic.sklembedded.com (c-98-210-181-167.hsd1.ca.comcast.net. [98.210.181.167]) by smtp.googlemail.com with ESMTPSA id 134sm83978490pgb.78.2019.01.08.16.16.00 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 08 Jan 2019 16:16:01 -0800 (PST) From: Steve Longerbeam To: linux-media@vger.kernel.org Cc: Steve Longerbeam , Philipp Zabel , Mauro Carvalho Chehab , Greg Kroah-Hartman , Bartlomiej Zolnierkiewicz , dri-devel@lists.freedesktop.org (open list:DRM DRIVERS FOR FREESCALE IMX), linux-kernel@vger.kernel.org (open list), devel@driverdev.osuosl.org (open list:STAGING SUBSYSTEM), linux-fbdev@vger.kernel.org (open list:FRAMEBUFFER LAYER) Subject: [PATCH v6 02/12] gpu: ipu-csi: Swap fields according to input/output field types Date: Tue, 8 Jan 2019 16:15:41 -0800 Message-Id: <20190109001551.16113-3-slongerbeam@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190109001551.16113-1-slongerbeam@gmail.com> References: <20190109001551.16113-1-slongerbeam@gmail.com> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The function ipu_csi_init_interface() was inverting the F-bit for NTSC case, in the CCIR_CODE_1/2 registers. The result being that for NTSC bottom-top field order, the CSI would swap fields and capture in top-bottom order. Instead, base field swap on the field order of the input to the CSI, and the field order of the requested output. If the input/output fields are sequential but different, swap fields, otherwise do not swap. This requires passing both the input and output mbus frame formats to ipu_csi_init_interface(). Move this code to a new private function ipu_csi_set_bt_interlaced_codes() that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and possibly interlaced BT.1120 in the future). When detecting input video standard from the input frame width/height, make sure to double height if input field type is alternate, since in that case input height only includes lines for one field. Signed-off-by: Steve Longerbeam Reviewed-by: Philipp Zabel --- Changes since v5: - Convert to const the infmt, outfmt, and mbus_cfg pointer args to ipu_csi_init_interface(), suggested by Philipp Zabel. - Bring back if_fmt local var and don't copy outfmt to local stack in csi_setup(), suggested by Philipp. Changes since v4: - Cleaned up some convoluted code in ipu_csi_init_interface(), suggested by Philipp. - Fixed a regression in csi_setup(), caught by Philipp. --- drivers/gpu/ipu-v3/ipu-csi.c | 126 +++++++++++++++------- drivers/staging/media/imx/imx-media-csi.c | 7 +- include/video/imx-ipu-v3.h | 5 +- 3 files changed, 89 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index aa0e30a2ba18..d1e575571a8d 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -325,12 +325,21 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code, return 0; } +/* translate alternate field mode based on given standard */ +static inline enum v4l2_field +ipu_csi_translate_field(enum v4l2_field field, v4l2_std_id std) +{ + return (field != V4L2_FIELD_ALTERNATE) ? field : + ((std & V4L2_STD_525_60) ? + V4L2_FIELD_SEQ_BT : V4L2_FIELD_SEQ_TB); +} + /* * Fill a CSI bus config struct from mbus_config and mbus_framefmt. */ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, - struct v4l2_mbus_config *mbus_cfg, - struct v4l2_mbus_framefmt *mbus_fmt) + const struct v4l2_mbus_config *mbus_cfg, + const struct v4l2_mbus_framefmt *mbus_fmt) { int ret; @@ -374,22 +383,76 @@ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, return 0; } +static int +ipu_csi_set_bt_interlaced_codes(struct ipu_csi *csi, + const struct v4l2_mbus_framefmt *infmt, + const struct v4l2_mbus_framefmt *outfmt, + v4l2_std_id std) +{ + enum v4l2_field infield, outfield; + bool swap_fields; + + /* get translated field type of input and output */ + infield = ipu_csi_translate_field(infmt->field, std); + outfield = ipu_csi_translate_field(outfmt->field, std); + + /* + * Write the H-V-F codes the CSI will match against the + * incoming data for start/end of active and blanking + * field intervals. If input and output field types are + * sequential but not the same (one is SEQ_BT and the other + * is SEQ_TB), swap the F-bit so that the CSI will capture + * field 1 lines before field 0 lines. + */ + swap_fields = (V4L2_FIELD_IS_SEQUENTIAL(infield) && + V4L2_FIELD_IS_SEQUENTIAL(outfield) && + infield != outfield); + + if (!swap_fields) { + /* + * Field0BlankEnd = 110, Field0BlankStart = 010 + * Field0ActiveEnd = 100, Field0ActiveStart = 000 + * Field1BlankEnd = 111, Field1BlankStart = 011 + * Field1ActiveEnd = 101, Field1ActiveStart = 001 + */ + ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN, + CSI_CCIR_CODE_1); + ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2); + } else { + dev_dbg(csi->ipu->dev, "capture field swap\n"); + + /* same as above but with F-bit inverted */ + ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN, + CSI_CCIR_CODE_1); + ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2); + } + + ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3); + + return 0; +} + + int ipu_csi_init_interface(struct ipu_csi *csi, - struct v4l2_mbus_config *mbus_cfg, - struct v4l2_mbus_framefmt *mbus_fmt) + const struct v4l2_mbus_config *mbus_cfg, + const struct v4l2_mbus_framefmt *infmt, + const struct v4l2_mbus_framefmt *outfmt) { struct ipu_csi_bus_config cfg; unsigned long flags; u32 width, height, data = 0; + v4l2_std_id std; int ret; - ret = fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt); + ret = fill_csi_bus_cfg(&cfg, mbus_cfg, infmt); if (ret < 0) return ret; /* set default sensor frame width and height */ - width = mbus_fmt->width; - height = mbus_fmt->height; + width = infmt->width; + height = infmt->height; + if (infmt->field == V4L2_FIELD_ALTERNATE) + height *= 2; /* Set the CSI_SENS_CONF register remaining fields */ data |= cfg.data_width << CSI_SENS_CONF_DATA_WIDTH_SHIFT | @@ -416,42 +479,22 @@ int ipu_csi_init_interface(struct ipu_csi *csi, ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3); break; case IPU_CSI_CLK_MODE_CCIR656_INTERLACED: - if (mbus_fmt->width == 720 && mbus_fmt->height == 576) { - /* - * PAL case - * - * Field0BlankEnd = 0x6, Field0BlankStart = 0x2, - * Field0ActiveEnd = 0x4, Field0ActiveStart = 0 - * Field1BlankEnd = 0x7, Field1BlankStart = 0x3, - * Field1ActiveEnd = 0x5, Field1ActiveStart = 0x1 - */ - height = 625; /* framelines for PAL */ - - ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN, - CSI_CCIR_CODE_1); - ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2); - ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3); - } else if (mbus_fmt->width == 720 && mbus_fmt->height == 480) { - /* - * NTSC case - * - * Field0BlankEnd = 0x7, Field0BlankStart = 0x3, - * Field0ActiveEnd = 0x5, Field0ActiveStart = 0x1 - * Field1BlankEnd = 0x6, Field1BlankStart = 0x2, - * Field1ActiveEnd = 0x4, Field1ActiveStart = 0 - */ - height = 525; /* framelines for NTSC */ - - ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN, - CSI_CCIR_CODE_1); - ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2); - ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3); + if (width == 720 && height == 480) { + std = V4L2_STD_NTSC; + height = 525; + } else if (width == 720 && height == 576) { + std = V4L2_STD_PAL; + height = 625; } else { dev_err(csi->ipu->dev, - "Unsupported CCIR656 interlaced video mode\n"); - spin_unlock_irqrestore(&csi->lock, flags); - return -EINVAL; + "Unsupported interlaced video mode\n"); + ret = -EINVAL; + goto out_unlock; } + + ret = ipu_csi_set_bt_interlaced_codes(csi, infmt, outfmt, std); + if (ret) + goto out_unlock; break; case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR: case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR: @@ -476,9 +519,10 @@ int ipu_csi_init_interface(struct ipu_csi *csi, dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n", ipu_csi_read(csi, CSI_ACT_FRM_SIZE)); +out_unlock: spin_unlock_irqrestore(&csi->lock, flags); - return 0; + return ret; } EXPORT_SYMBOL_GPL(ipu_csi_init_interface); diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c index 4223f8d418ae..c2a8d9cd31b7 100644 --- a/drivers/staging/media/imx/imx-media-csi.c +++ b/drivers/staging/media/imx/imx-media-csi.c @@ -679,12 +679,7 @@ static int csi_setup(struct csi_priv *priv) priv->upstream_ep.bus.parallel.flags : priv->upstream_ep.bus.mipi_csi2.flags; - /* - * we need to pass input frame to CSI interface, but - * with translated field type from output format - */ if_fmt = *infmt; - if_fmt.field = outfmt->field; crop = priv->crop; /* @@ -702,7 +697,7 @@ static int csi_setup(struct csi_priv *priv) priv->crop.width == 2 * priv->compose.width, priv->crop.height == 2 * priv->compose.height); - ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt); + ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt, outfmt); ipu_csi_set_dest(priv->csi, priv->dest); diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h index e582e8e7527a..bbc8481f567d 100644 --- a/include/video/imx-ipu-v3.h +++ b/include/video/imx-ipu-v3.h @@ -354,8 +354,9 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan, */ struct ipu_csi; int ipu_csi_init_interface(struct ipu_csi *csi, - struct v4l2_mbus_config *mbus_cfg, - struct v4l2_mbus_framefmt *mbus_fmt); + const struct v4l2_mbus_config *mbus_cfg, + const struct v4l2_mbus_framefmt *infmt, + const struct v4l2_mbus_framefmt *outfmt); bool ipu_csi_is_interlaced(struct ipu_csi *csi); void ipu_csi_get_window(struct ipu_csi *csi, struct v4l2_rect *w); void ipu_csi_set_window(struct ipu_csi *csi, struct v4l2_rect *w); -- 2.17.1