linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Ben Kao <ben.kao@intel.com>
Cc: linux-media@vger.kernel.org, andy.yeh@intel.com, tfiga@chromium.org
Subject: Re: [PATCH v2] media: ov8856: Add support for OV8856 sensor
Date: Mon, 14 Jan 2019 16:32:56 +0200	[thread overview]
Message-ID: <20190114143255.eumqh5nhcwqft7ng@paasikivi.fi.intel.com> (raw)
In-Reply-To: <1547176516-18074-1-git-send-email-ben.kao@intel.com>

Hi Ben,

Thanks for the update. A few trivial things below, and then I guess we're
done.

On Fri, Jan 11, 2019 at 11:15:16AM +0800, Ben Kao wrote:
> This patch adds driver for Omnivision's ov8856 sensor,
> the driver supports following features:
> 
> - manual exposure/gain(analog and digital) control support
> - two link frequencies
> - VBLANK/HBLANK support
> - test pattern support
> - media controller support
> - runtime PM support
> - enable Vsync signal output
> - supported resolutions
>   + 3280x2464 at 30FPS
>   + 1640x1232 at 30FPS
> 
> Signed-off-by: Ben Kao <ben.kao@intel.com>
> ---
> since v2:
> --Add MAINTAINERS entry for ov8856 driver.
> --Modify the type of variables buf_i/var_i to "unsigned int" in
>   ov8856_write_reg().
> --Add link_validate function.
> --Remove "ifdef CONFIG_ACPI" in ov8856_i2c_driver{}.
> --Move ov8856_check_hwcfg() to the top of ov8856_probe().
> --Remove unnecessary blank lines.
> --Remove unnecessary V4L2_SUBDEV_FL_HAS_EVENTS flag.
> --Enable Vsync signal output.
> ---
>  MAINTAINERS                |    7 +
>  drivers/media/i2c/Kconfig  |   12 +
>  drivers/media/i2c/Makefile |    1 +
>  drivers/media/i2c/ov8856.c | 1285 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 1305 insertions(+)
>  create mode 100644 drivers/media/i2c/ov8856.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0767f1d..74d4d50 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11068,6 +11068,13 @@ S:	Maintained
>  F:	drivers/media/i2c/ov7740.c
>  F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
>  
> +OMNIVISION OV8856 SENSOR DRIVER
> +M:	Ben Kao <ben.kao@intel.com>
> +L:	linux-media@vger.kernel.org
> +T:	git git://linuxtv.org/media_tree.git
> +S:	Maintained
> +F:	drivers/media/i2c/ov8856.c
> +
>  OMNIVISION OV9650 SENSOR DRIVER
>  M:	Sakari Ailus <sakari.ailus@linux.intel.com>
>  R:	Akinobu Mita <akinobu.mita@gmail.com>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 704af21..4fdcb92 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -806,6 +806,18 @@ config VIDEO_OV7740
>  	  This is a Video4Linux2 sensor driver for the OmniVision
>  	  OV7740 VGA camera sensor.
>  
> +config VIDEO_OV8856
> +	tristate "OmniVision OV8856 sensor support"
> +	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CAMERA_SUPPORT
> +	select V4L2_FWNODE
> +	help
> +	  This is a Video4Linux2 sensor driver for the OmniVision
> +	  OV8856 camera sensor.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ov8856.
> +
>  config VIDEO_OV9650
>  	tristate "OmniVision OV9650/OV9652 sensor support"
>  	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 260d4d9..47accb0 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -78,6 +78,7 @@ obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
>  obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
>  obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
>  obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
> +obj-$(CONFIG_VIDEO_OV8856) += ov8856.o
>  obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
>  obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
>  obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> new file mode 100644
> index 0000000..375f9bd
> --- /dev/null
> +++ b/drivers/media/i2c/ov8856.c
> @@ -0,0 +1,1285 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Intel Corporation.

2018--2019

> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#ifndef V4L2_CID_DIGITAL_GAIN
> +#define V4L2_CID_DIGITAL_GAIN		V4L2_CID_GAIN
> +#endif

You can drop the three lines (or actually four, including the empty one).

> +
> +#define OV8856_REG_VALUE_08BIT		1
> +#define OV8856_REG_VALUE_16BIT		2
> +#define OV8856_REG_VALUE_24BIT		3
> +
> +#define OV8856_LINK_FREQ_360MHZ		360000000ULL
> +#define OV8856_LINK_FREQ_180MHZ		180000000ULL
> +#define OV8856_SCLK			144000000ULL
> +#define OV8856_MCLK			19200000
> +#define OV8856_DATA_LANES		4
> +#define OV8856_RGB_DEPTH		10
> +
> +#define OV8856_REG_CHIP_ID		0x300a
> +#define OV8856_CHIP_ID			0x00885a
> +
> +#define OV8856_REG_MODE_SELECT		0x0100
> +#define OV8856_MODE_STANDBY		0x00
> +#define OV8856_MODE_STREAMING		0x01
> +
> +/* vertical-timings from sensor */
> +#define OV8856_REG_VTS			0x380e
> +#define OV8856_VTS_MAX			0x7fff
> +
> +/* horizontal-timings from sensor */
> +#define OV8856_REG_HTS			0x380c
> +
> +/* Exposure controls from sensor */
> +#define OV8856_REG_EXPOSURE		0x3500
> +#define	OV8856_EXPOSURE_MIN		6
> +#define OV8856_EXPOSURE_MAX_MARGIN	6
> +#define	OV8856_EXPOSURE_STEP		1
> +
> +/* Analog gain controls from sensor */
> +#define OV8856_REG_ANALOG_GAIN		0x3508
> +#define	OV8856_ANAL_GAIN_MIN		128
> +#define	OV8856_ANAL_GAIN_MAX		2047
> +#define	OV8856_ANAL_GAIN_STEP		1
> +
> +/* Digital gain controls from sensor */
> +#define OV8856_REG_MWB_R_GAIN		0x5019
> +#define OV8856_REG_MWB_G_GAIN		0x501b
> +#define OV8856_REG_MWB_B_GAIN		0x501d
> +#define OV8856_DGTL_GAIN_MIN		0
> +#define OV8856_DGTL_GAIN_MAX		4095
> +#define OV8856_DGTL_GAIN_STEP		1
> +#define OV8856_DGTL_GAIN_DEFAULT	1024
> +
> +/* Test Pattern Control */
> +#define OV8856_REG_TEST_PATTERN		0x5e00
> +#define OV8856_TEST_PATTERN_ENABLE	BIT(7)
> +#define OV8856_TEST_PATTERN_BAR_SHIFT	2
> +
> +#define to_ov8856(_sd)			container_of(_sd, struct ov8856, sd)
> +
> +enum {
> +	OV8856_LINK_FREQ_720MBPS,
> +	OV8856_LINK_FREQ_360MBPS,
> +};
> +
> +struct ov8856_reg {
> +	u16 address;
> +	u8 val;
> +};
> +
> +struct ov8856_reg_list {
> +	u32 num_of_regs;
> +	const struct ov8856_reg *regs;
> +};
> +
> +struct ov8856_link_freq_config {
> +	const struct ov8856_reg_list reg_list;
> +};
> +
> +struct ov8856_mode {
> +	/* Frame width in pixels */
> +	u32 width;
> +
> +	/* Frame height in pixels */
> +	u32 height;
> +
> +	/* Horizontal timining size */
> +	u32 hts;
> +
> +	/* Default vertical timining size */
> +	u32 vts_def;
> +
> +	/* Min vertical timining size */
> +	u32 vts_min;
> +
> +	/* Link frequency needed for this resolution */
> +	u32 link_freq_index;
> +
> +	/* Sensor register settings for this resolution */
> +	const struct ov8856_reg_list reg_list;
> +};
> +
> +static const struct ov8856_reg mipi_data_rate_720mbps[] = {
> +	{0x0103, 0x01},
> +	{0x0100, 0x00},
> +	{0x0302, 0x4b},
> +	{0x0303, 0x01},
> +	{0x030b, 0x02},
> +	{0x030d, 0x4b},
> +	{0x031e, 0x0c},
> +};
> +
> +static const struct ov8856_reg mipi_data_rate_360mbps[] = {
> +	{0x0103, 0x01},
> +	{0x0100, 0x00},
> +	{0x0302, 0x4b},
> +	{0x0303, 0x03},
> +	{0x030b, 0x02},
> +	{0x030d, 0x4b},
> +	{0x031e, 0x0c},
> +};
> +
> +static const struct ov8856_reg mode_3280x2464_regs[] = {
> +	{0x3000, 0x20},
> +	{0x3003, 0x08},
> +	{0x300e, 0x20},
> +	{0x3010, 0x00},
> +	{0x3015, 0x84},
> +	{0x3018, 0x72},
> +	{0x3021, 0x23},
> +	{0x3033, 0x24},
> +	{0x3500, 0x00},
> +	{0x3501, 0x9a},
> +	{0x3502, 0x20},
> +	{0x3503, 0x08},
> +	{0x3505, 0x83},
> +	{0x3508, 0x01},
> +	{0x3509, 0x80},
> +	{0x350c, 0x00},
> +	{0x350d, 0x80},
> +	{0x350e, 0x04},
> +	{0x350f, 0x00},
> +	{0x3510, 0x00},
> +	{0x3511, 0x02},
> +	{0x3512, 0x00},
> +	{0x3600, 0x72},
> +	{0x3601, 0x40},
> +	{0x3602, 0x30},
> +	{0x3610, 0xc5},
> +	{0x3611, 0x58},
> +	{0x3612, 0x5c},
> +	{0x3613, 0xca},
> +	{0x3614, 0x20},
> +	{0x3628, 0xff},
> +	{0x3629, 0xff},
> +	{0x362a, 0xff},
> +	{0x3633, 0x10},
> +	{0x3634, 0x10},
> +	{0x3635, 0x10},
> +	{0x3636, 0x10},
> +	{0x3663, 0x08},
> +	{0x3669, 0x34},
> +	{0x366e, 0x10},
> +	{0x3706, 0x86},
> +	{0x370b, 0x7e},
> +	{0x3714, 0x23},
> +	{0x3730, 0x12},
> +	{0x3733, 0x10},
> +	{0x3764, 0x00},
> +	{0x3765, 0x00},
> +	{0x3769, 0x62},
> +	{0x376a, 0x2a},
> +	{0x376b, 0x30},
> +	{0x3780, 0x00},
> +	{0x3781, 0x24},
> +	{0x3782, 0x00},
> +	{0x3783, 0x23},
> +	{0x3798, 0x2f},
> +	{0x37a1, 0x60},
> +	{0x37a8, 0x6a},
> +	{0x37ab, 0x3f},
> +	{0x37c2, 0x04},
> +	{0x37c3, 0xf1},
> +	{0x37c9, 0x80},
> +	{0x37cb, 0x16},
> +	{0x37cc, 0x16},
> +	{0x37cd, 0x16},
> +	{0x37ce, 0x16},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x07},
> +	{0x3804, 0x0c},
> +	{0x3805, 0xdf},
> +	{0x3806, 0x09},
> +	{0x3807, 0xa6},
> +	{0x3808, 0x0c},
> +	{0x3809, 0xd0},
> +	{0x380a, 0x09},
> +	{0x380b, 0xa0},
> +	{0x380c, 0x07},
> +	{0x380d, 0x88},
> +	{0x380e, 0x09},
> +	{0x380f, 0xb8},
> +	{0x3810, 0x00},
> +	{0x3811, 0x00},
> +	{0x3812, 0x00},
> +	{0x3813, 0x00},
> +	{0x3814, 0x01},
> +	{0x3815, 0x01},
> +	{0x3816, 0x00},
> +	{0x3817, 0x00},
> +	{0x3818, 0x00},
> +	{0x3819, 0x10},
> +	{0x3820, 0x80},
> +	{0x3821, 0x46},
> +	{0x382a, 0x01},
> +	{0x382b, 0x01},
> +	{0x3830, 0x06},
> +	{0x3836, 0x02},
> +	{0x3862, 0x04},
> +	{0x3863, 0x08},
> +	{0x3cc0, 0x33},
> +	{0x3d85, 0x17},
> +	{0x3d8c, 0x73},
> +	{0x3d8d, 0xde},
> +	{0x4001, 0xe0},
> +	{0x4003, 0x40},
> +	{0x4008, 0x00},
> +	{0x4009, 0x0b},
> +	{0x400a, 0x00},
> +	{0x400b, 0x84},
> +	{0x400f, 0x80},
> +	{0x4010, 0xf0},
> +	{0x4011, 0xff},
> +	{0x4012, 0x02},
> +	{0x4013, 0x01},
> +	{0x4014, 0x01},
> +	{0x4015, 0x01},
> +	{0x4042, 0x00},
> +	{0x4043, 0x80},
> +	{0x4044, 0x00},
> +	{0x4045, 0x80},
> +	{0x4046, 0x00},
> +	{0x4047, 0x80},
> +	{0x4048, 0x00},
> +	{0x4049, 0x80},
> +	{0x4041, 0x03},
> +	{0x404c, 0x20},
> +	{0x404d, 0x00},
> +	{0x404e, 0x20},
> +	{0x4203, 0x80},
> +	{0x4307, 0x30},
> +	{0x4317, 0x00},
> +	{0x4503, 0x08},
> +	{0x4601, 0x80},
> +	{0x4800, 0x44},
> +	{0x4816, 0x53},
> +	{0x481b, 0x58},
> +	{0x481f, 0x27},
> +	{0x4837, 0x16},
> +	{0x483c, 0x0f},
> +	{0x484b, 0x05},
> +	{0x5000, 0x57},
> +	{0x5001, 0x0a},
> +	{0x5004, 0x04},
> +	{0x502e, 0x03},
> +	{0x5030, 0x41},
> +	{0x5780, 0x14},
> +	{0x5781, 0x0f},
> +	{0x5782, 0x44},
> +	{0x5783, 0x02},
> +	{0x5784, 0x01},
> +	{0x5785, 0x01},
> +	{0x5786, 0x00},
> +	{0x5787, 0x04},
> +	{0x5788, 0x02},
> +	{0x5789, 0x0f},
> +	{0x578a, 0xfd},
> +	{0x578b, 0xf5},
> +	{0x578c, 0xf5},
> +	{0x578d, 0x03},
> +	{0x578e, 0x08},
> +	{0x578f, 0x0c},
> +	{0x5790, 0x08},
> +	{0x5791, 0x04},
> +	{0x5792, 0x00},
> +	{0x5793, 0x52},
> +	{0x5794, 0xa3},
> +	{0x5795, 0x02},
> +	{0x5796, 0x20},
> +	{0x5797, 0x20},
> +	{0x5798, 0xd5},
> +	{0x5799, 0xd5},
> +	{0x579a, 0x00},
> +	{0x579b, 0x50},
> +	{0x579c, 0x00},
> +	{0x579d, 0x2c},
> +	{0x579e, 0x0c},
> +	{0x579f, 0x40},
> +	{0x57a0, 0x09},
> +	{0x57a1, 0x40},
> +	{0x59f8, 0x3d},
> +	{0x5a08, 0x02},
> +	{0x5b00, 0x02},
> +	{0x5b01, 0x10},
> +	{0x5b02, 0x03},
> +	{0x5b03, 0xcf},
> +	{0x5b05, 0x6c},
> +	{0x5e00, 0x00}
> +};
> +
> +static const struct ov8856_reg mode_1640x1232_regs[] = {
> +	{0x3000, 0x20},
> +	{0x3003, 0x08},
> +	{0x300e, 0x20},
> +	{0x3010, 0x00},
> +	{0x3015, 0x84},
> +	{0x3018, 0x72},
> +	{0x3021, 0x23},
> +	{0x3033, 0x24},
> +	{0x3500, 0x00},
> +	{0x3501, 0x4c},
> +	{0x3502, 0xe0},
> +	{0x3503, 0x08},
> +	{0x3505, 0x83},
> +	{0x3508, 0x01},
> +	{0x3509, 0x80},
> +	{0x350c, 0x00},
> +	{0x350d, 0x80},
> +	{0x350e, 0x04},
> +	{0x350f, 0x00},
> +	{0x3510, 0x00},
> +	{0x3511, 0x02},
> +	{0x3512, 0x00},
> +	{0x3600, 0x72},
> +	{0x3601, 0x40},
> +	{0x3602, 0x30},
> +	{0x3610, 0xc5},
> +	{0x3611, 0x58},
> +	{0x3612, 0x5c},
> +	{0x3613, 0xca},
> +	{0x3614, 0x20},
> +	{0x3628, 0xff},
> +	{0x3629, 0xff},
> +	{0x362a, 0xff},
> +	{0x3633, 0x10},
> +	{0x3634, 0x10},
> +	{0x3635, 0x10},
> +	{0x3636, 0x10},
> +	{0x3663, 0x08},
> +	{0x3669, 0x34},
> +	{0x366e, 0x08},
> +	{0x3706, 0x86},
> +	{0x370b, 0x7e},
> +	{0x3714, 0x27},
> +	{0x3730, 0x12},
> +	{0x3733, 0x10},
> +	{0x3764, 0x00},
> +	{0x3765, 0x00},
> +	{0x3769, 0x62},
> +	{0x376a, 0x2a},
> +	{0x376b, 0x30},
> +	{0x3780, 0x00},
> +	{0x3781, 0x24},
> +	{0x3782, 0x00},
> +	{0x3783, 0x23},
> +	{0x3798, 0x2f},
> +	{0x37a1, 0x60},
> +	{0x37a8, 0x6a},
> +	{0x37ab, 0x3f},
> +	{0x37c2, 0x14},
> +	{0x37c3, 0xf1},
> +	{0x37c9, 0x80},
> +	{0x37cb, 0x16},
> +	{0x37cc, 0x16},
> +	{0x37cd, 0x16},
> +	{0x37ce, 0x16},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x07},
> +	{0x3804, 0x0c},
> +	{0x3805, 0xdf},
> +	{0x3806, 0x09},
> +	{0x3807, 0xa6},
> +	{0x3808, 0x06},
> +	{0x3809, 0x68},
> +	{0x380a, 0x04},
> +	{0x380b, 0xd0},
> +	{0x380c, 0x0e},
> +	{0x380d, 0xec},
> +	{0x380e, 0x04},
> +	{0x380f, 0xe8},
> +	{0x3810, 0x00},
> +	{0x3811, 0x00},
> +	{0x3812, 0x00},
> +	{0x3813, 0x00},
> +	{0x3814, 0x03},
> +	{0x3815, 0x01},
> +	{0x3816, 0x00},
> +	{0x3817, 0x00},
> +	{0x3818, 0x00},
> +	{0x3819, 0x10},
> +	{0x3820, 0x90},
> +	{0x3821, 0x67},
> +	{0x382a, 0x03},
> +	{0x382b, 0x01},
> +	{0x3830, 0x06},
> +	{0x3836, 0x02},
> +	{0x3862, 0x04},
> +	{0x3863, 0x08},
> +	{0x3cc0, 0x33},
> +	{0x3d85, 0x17},
> +	{0x3d8c, 0x73},
> +	{0x3d8d, 0xde},
> +	{0x4001, 0xe0},
> +	{0x4003, 0x40},
> +	{0x4008, 0x00},
> +	{0x4009, 0x05},
> +	{0x400a, 0x00},
> +	{0x400b, 0x84},
> +	{0x400f, 0x80},
> +	{0x4010, 0xf0},
> +	{0x4011, 0xff},
> +	{0x4012, 0x02},
> +	{0x4013, 0x01},
> +	{0x4014, 0x01},
> +	{0x4015, 0x01},
> +	{0x4042, 0x00},
> +	{0x4043, 0x80},
> +	{0x4044, 0x00},
> +	{0x4045, 0x80},
> +	{0x4046, 0x00},
> +	{0x4047, 0x80},
> +	{0x4048, 0x00},
> +	{0x4049, 0x80},
> +	{0x4041, 0x03},
> +	{0x404c, 0x20},
> +	{0x404d, 0x00},
> +	{0x404e, 0x20},
> +	{0x4203, 0x80},
> +	{0x4307, 0x30},
> +	{0x4317, 0x00},
> +	{0x4503, 0x08},
> +	{0x4601, 0x80},
> +	{0x4800, 0x44},
> +	{0x4816, 0x53},
> +	{0x481b, 0x58},
> +	{0x481f, 0x27},
> +	{0x4837, 0x16},
> +	{0x483c, 0x0f},
> +	{0x484b, 0x05},
> +	{0x5000, 0x57},
> +	{0x5001, 0x0a},
> +	{0x5004, 0x04},
> +	{0x502e, 0x03},
> +	{0x5030, 0x41},
> +	{0x5780, 0x14},
> +	{0x5781, 0x0f},
> +	{0x5782, 0x44},
> +	{0x5783, 0x02},
> +	{0x5784, 0x01},
> +	{0x5785, 0x01},
> +	{0x5786, 0x00},
> +	{0x5787, 0x04},
> +	{0x5788, 0x02},
> +	{0x5789, 0x0f},
> +	{0x578a, 0xfd},
> +	{0x578b, 0xf5},
> +	{0x578c, 0xf5},
> +	{0x578d, 0x03},
> +	{0x578e, 0x08},
> +	{0x578f, 0x0c},
> +	{0x5790, 0x08},
> +	{0x5791, 0x04},
> +	{0x5792, 0x00},
> +	{0x5793, 0x52},
> +	{0x5794, 0xa3},
> +	{0x5795, 0x00},
> +	{0x5796, 0x10},
> +	{0x5797, 0x10},
> +	{0x5798, 0x73},
> +	{0x5799, 0x73},
> +	{0x579a, 0x00},
> +	{0x579b, 0x28},
> +	{0x579c, 0x00},
> +	{0x579d, 0x16},
> +	{0x579e, 0x06},
> +	{0x579f, 0x20},
> +	{0x57a0, 0x04},
> +	{0x57a1, 0xa0},
> +	{0x59f8, 0x3d},
> +	{0x5a08, 0x02},
> +	{0x5b00, 0x02},
> +	{0x5b01, 0x10},
> +	{0x5b02, 0x03},
> +	{0x5b03, 0xcf},
> +	{0x5b05, 0x6c},
> +	{0x5e00, 0x00}
> +};
> +
> +static const char * const ov8856_test_pattern_menu[] = {
> +	"Disabled",
> +	"Standard Color Bar",
> +	"Top-Bottom Darker Color Bar",
> +	"Right-Left Darker Color Bar",
> +	"Bottom-Top Darker Color Bar"
> +};
> +
> +static const s64 link_freq_menu_items[] = {
> +	OV8856_LINK_FREQ_360MHZ,
> +	OV8856_LINK_FREQ_180MHZ
> +};
> +
> +static const struct ov8856_link_freq_config link_freq_configs[] = {
> +	[OV8856_LINK_FREQ_720MBPS] = {
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mipi_data_rate_720mbps),
> +			.regs = mipi_data_rate_720mbps,
> +		}
> +	},
> +	[OV8856_LINK_FREQ_360MBPS] = {
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mipi_data_rate_360mbps),
> +			.regs = mipi_data_rate_360mbps,
> +		}
> +	}
> +};
> +
> +static const struct ov8856_mode supported_modes[] = {
> +	{
> +		.width = 3280,
> +		.height = 2464,
> +		.hts = 1928,
> +		.vts_def = 2488,
> +		.vts_min = 2488,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
> +			.regs = mode_3280x2464_regs,
> +		},
> +		.link_freq_index = OV8856_LINK_FREQ_720MBPS,
> +	},
> +	{
> +		.width = 1640,
> +		.height = 1232,
> +		.hts = 3820,
> +		.vts_def = 1256,
> +		.vts_min = 1256,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_1640x1232_regs),
> +			.regs = mode_1640x1232_regs,
> +		},
> +		.link_freq_index = OV8856_LINK_FREQ_360MBPS,
> +	}
> +};
> +
> +struct ov8856 {
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +
> +	/* V4L2 Controls */
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_ctrl *vblank;
> +	struct v4l2_ctrl *hblank;
> +	struct v4l2_ctrl *exposure;
> +
> +	/* Current mode */
> +	const struct ov8856_mode *cur_mode;
> +
> +	/* To serialize asynchronus callbacks */
> +	struct mutex mutex;
> +
> +	/* Streaming on/off */
> +	bool streaming;
> +};
> +
> +static u64 to_pixel_rate(u32 f_index)
> +{
> +	u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV8856_DATA_LANES;
> +
> +	do_div(pixel_rate, OV8856_RGB_DEPTH);
> +
> +	return pixel_rate;
> +}
> +
> +static u64 to_pixels_per_line(u32 hts, u32 f_index)
> +{
> +	u64 ppl = hts * to_pixel_rate(f_index);
> +
> +	do_div(ppl, OV8856_SCLK);
> +
> +	return ppl;
> +}
> +
> +static int ov8856_read_reg(struct ov8856 *ov8856, u16 reg, u16 len, u32 *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	struct i2c_msg msgs[2];
> +	u8 *data_be_p;
> +	__be32 data_be = 0;
> +	__be16 reg_addr_be = cpu_to_be16(reg);
> +	int ret;
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	data_be_p = (u8 *)&data_be;
> +	msgs[0].addr = client->addr;
> +	msgs[0].flags = 0;
> +	msgs[0].len = 2;
> +	msgs[0].buf = (u8 *)&reg_addr_be;
> +	msgs[1].addr = client->addr;
> +	msgs[1].flags = I2C_M_RD;
> +	msgs[1].len = len;
> +	msgs[1].buf = &data_be_p[4 - len];
> +
> +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> +	if (ret != ARRAY_SIZE(msgs))
> +		return -EIO;
> +
> +	*val = be32_to_cpu(data_be);
> +
> +	return 0;
> +}
> +
> +static int ov8856_write_reg(struct ov8856 *ov8856, u16 reg, u16 len, u32 __val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	unsigned int buf_i, val_i;
> +	u8 buf[6];
> +	u8 *val_p;
> +	__be32 val;
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	buf[0] = reg >> 8;
> +	buf[1] = reg & 0xff;
> +
> +	val = cpu_to_be32(__val);
> +	val_p = (u8 *)&val;
> +	buf_i = 2;
> +	val_i = 4 - len;
> +
> +	while (val_i < 4)
> +		buf[buf_i++] = val_p[val_i++];
> +
> +	if (i2c_master_send(client, buf, len + 2) != len + 2)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int ov8856_write_reg_list(struct ov8856 *ov8856,
> +				 const struct ov8856_reg_list *r_list)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < r_list->num_of_regs; i++) {
> +		ret = ov8856_write_reg(ov8856, r_list->regs[i].address, 1,
> +				       r_list->regs[i].val);
> +		if (ret) {
> +			dev_err_ratelimited(&client->dev,
> +				    "failed to write reg 0x%4.4x. error = %d",
> +				    r_list->regs[i].address, ret);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov8856_update_digital_gain(struct ov8856 *ov8856, u32 d_gain)
> +{
> +	int ret;
> +
> +	ret = ov8856_write_reg(ov8856, OV8856_REG_MWB_R_GAIN,
> +			       OV8856_REG_VALUE_16BIT, d_gain);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov8856_write_reg(ov8856, OV8856_REG_MWB_G_GAIN,
> +			       OV8856_REG_VALUE_16BIT, d_gain);
> +	if (ret)
> +		return ret;
> +
> +	return ov8856_write_reg(ov8856, OV8856_REG_MWB_B_GAIN,
> +				OV8856_REG_VALUE_16BIT, d_gain);
> +}
> +
> +static int ov8856_test_pattern(struct ov8856 *ov8856, u32 pattern)
> +{
> +	if (pattern)
> +		pattern = (pattern - 1) << OV8856_TEST_PATTERN_BAR_SHIFT |
> +			  OV8856_TEST_PATTERN_ENABLE;
> +
> +	return ov8856_write_reg(ov8856, OV8856_REG_TEST_PATTERN,
> +				OV8856_REG_VALUE_08BIT, pattern);
> +}
> +
> +static int ov8856_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ov8856 *ov8856 = container_of(ctrl->handler,
> +					     struct ov8856, ctrl_handler);
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	s64 exposure_max;
> +	int ret = 0;
> +
> +	/* Propagate change of current control to all related controls */
> +	if (ctrl->id == V4L2_CID_VBLANK) {
> +		/* Update max exposure while meeting expected vblanking */
> +		exposure_max = ov8856->cur_mode->height + ctrl->val -
> +			       OV8856_EXPOSURE_MAX_MARGIN;
> +		__v4l2_ctrl_modify_range(ov8856->exposure,
> +					 ov8856->exposure->minimum,
> +					 exposure_max, ov8856->exposure->step,
> +					 exposure_max);
> +	}
> +
> +	/* V4L2 controls values will be applied only when power is already up */
> +	if (!pm_runtime_get_if_in_use(&client->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = ov8856_write_reg(ov8856, OV8856_REG_ANALOG_GAIN,
> +				       OV8856_REG_VALUE_16BIT, ctrl->val);
> +		break;
> +
> +	case V4L2_CID_DIGITAL_GAIN:
> +		ret = ov8856_update_digital_gain(ov8856, ctrl->val);
> +		break;
> +
> +	case V4L2_CID_EXPOSURE:
> +		/* 4 least significant bits of expsoure are fractional part */
> +		ret = ov8856_write_reg(ov8856, OV8856_REG_EXPOSURE,
> +				       OV8856_REG_VALUE_24BIT, ctrl->val << 4);
> +		break;
> +
> +	case V4L2_CID_VBLANK:
> +		ret = ov8856_write_reg(ov8856, OV8856_REG_VTS,
> +				       OV8856_REG_VALUE_16BIT,
> +				       ov8856->cur_mode->height + ctrl->val);
> +		break;
> +
> +	case V4L2_CID_TEST_PATTERN:
> +		ret = ov8856_test_pattern(ov8856, ctrl->val);
> +		break;
> +
> +	default:
> +		dev_info(&client->dev, "unhandled id:0x%x, val:0x%x",
> +			 ctrl->id, ctrl->val);

This should set ret accordingly. The message is not needed IMO though; up
to you.

> +		break;
> +	}
> +
> +	pm_runtime_put(&client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ov8856_ctrl_ops = {
> +	.s_ctrl = ov8856_set_ctrl,
> +};
> +
> +static int ov8856_init_controls(struct ov8856 *ov8856)
> +{
> +	struct v4l2_ctrl_handler *ctrl_hdlr;
> +	s64 exposure_max, h_blank;
> +	int ret;
> +
> +	ctrl_hdlr = &ov8856->ctrl_handler;
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
> +	if (ret)
> +		return ret;
> +
> +	ctrl_hdlr->lock = &ov8856->mutex;
> +	ov8856->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov8856_ctrl_ops,
> +					   V4L2_CID_LINK_FREQ,
> +					   ARRAY_SIZE(link_freq_menu_items) - 1,
> +					   0, link_freq_menu_items);
> +	if (ov8856->link_freq)
> +		ov8856->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	ov8856->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops,
> +				       V4L2_CID_PIXEL_RATE, 0,
> +				       to_pixel_rate(OV8856_LINK_FREQ_720MBPS),
> +				       1,
> +				       to_pixel_rate(OV8856_LINK_FREQ_720MBPS));
> +	ov8856->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops,
> +			  V4L2_CID_VBLANK,
> +			  ov8856->cur_mode->vts_min - ov8856->cur_mode->height,
> +			  OV8856_VTS_MAX - ov8856->cur_mode->height, 1,
> +			  ov8856->cur_mode->vts_def - ov8856->cur_mode->height);
> +	h_blank = to_pixels_per_line(ov8856->cur_mode->hts,
> +		  ov8856->cur_mode->link_freq_index) - ov8856->cur_mode->width;
> +	ov8856->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops,
> +					   V4L2_CID_HBLANK, h_blank, h_blank, 1,
> +					   h_blank);
> +	if (ov8856->hblank)
> +		ov8856->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> +			  OV8856_ANAL_GAIN_MIN, OV8856_ANAL_GAIN_MAX,
> +			  OV8856_ANAL_GAIN_STEP, OV8856_ANAL_GAIN_MIN);
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> +			  OV8856_DGTL_GAIN_MIN, OV8856_DGTL_GAIN_MAX,
> +			  OV8856_DGTL_GAIN_STEP, OV8856_DGTL_GAIN_DEFAULT);
> +	exposure_max = ov8856->cur_mode->vts_def - OV8856_EXPOSURE_MAX_MARGIN;
> +	ov8856->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov8856_ctrl_ops,
> +					     V4L2_CID_EXPOSURE,
> +					     OV8856_EXPOSURE_MIN, exposure_max,
> +					     OV8856_EXPOSURE_STEP,
> +					     exposure_max);
> +	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov8856_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(ov8856_test_pattern_menu) - 1,
> +				     0, 0, ov8856_test_pattern_menu);
> +	if (ctrl_hdlr->error)
> +		return ctrl_hdlr->error;
> +
> +	ov8856->sd.ctrl_handler = ctrl_hdlr;
> +
> +	return 0;
> +}
> +
> +static void ov8856_update_pad_format(const struct ov8856_mode *mode,
> +				     struct v4l2_mbus_framefmt *fmt)
> +{
> +	fmt->width = mode->width;
> +	fmt->height = mode->height;
> +	fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	fmt->field = V4L2_FIELD_NONE;
> +}
> +
> +static int ov8856_start_streaming(struct ov8856 *ov8856)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	const struct ov8856_reg_list *reg_list;
> +	int link_freq_index, ret;
> +
> +	link_freq_index = ov8856->cur_mode->link_freq_index;
> +	reg_list = &link_freq_configs[link_freq_index].reg_list;
> +	ret = ov8856_write_reg_list(ov8856, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to set plls");
> +		return ret;
> +	}
> +
> +	reg_list = &ov8856->cur_mode->reg_list;
> +	ret = ov8856_write_reg_list(ov8856, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to set mode");
> +		return ret;
> +	}
> +
> +	ret = __v4l2_ctrl_handler_setup(ov8856->sd.ctrl_handler);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
> +			       OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to set stream");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ov8856_stop_streaming(struct ov8856 *ov8856)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +
> +	if (ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
> +		OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY))

Wrong indentation.

> +		dev_err(&client->dev, "failed to set stream");
> +}
> +
> +static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	if (ov8856->streaming == enable)
> +		return 0;
> +
> +	mutex_lock(&ov8856->mutex);
> +	if (enable) {
> +		ret = pm_runtime_get_sync(&client->dev);
> +		if (ret < 0) {
> +			pm_runtime_put_noidle(&client->dev);
> +			mutex_unlock(&ov8856->mutex);
> +			return ret;
> +		}
> +
> +		ret = ov8856_start_streaming(ov8856);
> +		if (ret) {
> +			enable = 0;
> +			ov8856_stop_streaming(ov8856);
> +			pm_runtime_put(&client->dev);
> +		}
> +	} else {
> +		ov8856_stop_streaming(ov8856);
> +		pm_runtime_put(&client->dev);
> +	}
> +
> +	ov8856->streaming = enable;
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ov8856_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +
> +	mutex_lock(&ov8856->mutex);
> +	if (ov8856->streaming)
> +		ov8856_stop_streaming(ov8856);
> +
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ov8856_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +	int ret;
> +
> +	mutex_lock(&ov8856->mutex);
> +	if (ov8856->streaming) {
> +		ret = ov8856_start_streaming(ov8856);
> +		if (ret) {
> +			ov8856->streaming = false;
> +			ov8856_stop_streaming(ov8856);
> +			mutex_unlock(&ov8856->mutex);
> +			return ret;
> +		}
> +	}
> +
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov8856_set_format(struct v4l2_subdev *sd,
> +			     struct v4l2_subdev_pad_config *cfg,
> +			     struct v4l2_subdev_format *fmt)
> +{
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +	const struct ov8856_mode *mode;
> +	s32 vblank_def, h_blank;
> +
> +	mode = v4l2_find_nearest_size(supported_modes,
> +				      ARRAY_SIZE(supported_modes), width,
> +				      height, fmt->format.width,
> +				      fmt->format.height);
> +
> +	mutex_lock(&ov8856->mutex);
> +	ov8856_update_pad_format(mode, &fmt->format);
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> +	} else {
> +		ov8856->cur_mode = mode;
> +		__v4l2_ctrl_s_ctrl(ov8856->link_freq, mode->link_freq_index);
> +		__v4l2_ctrl_s_ctrl_int64(ov8856->pixel_rate,
> +					 to_pixel_rate(mode->link_freq_index));
> +
> +		/* Update limits and set FPS to default */
> +		vblank_def = mode->vts_def - mode->height;
> +		__v4l2_ctrl_modify_range(ov8856->vblank,
> +					 mode->vts_min - mode->height,
> +					 OV8856_VTS_MAX - mode->height, 1,
> +					 vblank_def);
> +		__v4l2_ctrl_s_ctrl(ov8856->vblank, vblank_def);
> +		h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
> +			  mode->width;
> +		__v4l2_ctrl_modify_range(ov8856->hblank, h_blank, h_blank, 1,
> +					 h_blank);
> +	}
> +
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov8856_get_format(struct v4l2_subdev *sd,
> +			     struct v4l2_subdev_pad_config *cfg,
> +			     struct v4l2_subdev_format *fmt)
> +{
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +
> +	mutex_lock(&ov8856->mutex);
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> +		fmt->format = *v4l2_subdev_get_try_format(&ov8856->sd, cfg,
> +							  fmt->pad);
> +	else
> +		ov8856_update_pad_format(ov8856->cur_mode, &fmt->format);
> +
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_pad_config *cfg,
> +				 struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	/* Only one bayer order GRBG is supported */
> +	if (code->index > 0)
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	return 0;
> +}
> +
> +static int ov8856_enum_frame_size(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_pad_config *cfg,
> +				  struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +		return -EINVAL;
> +
> +	fse->min_width = supported_modes[fse->index].width;
> +	fse->max_width = fse->min_width;
> +	fse->min_height = supported_modes[fse->index].height;
> +	fse->max_height = fse->min_height;
> +
> +	return 0;
> +}
> +
> +static int ov8856_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +
> +	mutex_lock(&ov8856->mutex);
> +	ov8856_update_pad_format(&supported_modes[0],
> +				 v4l2_subdev_get_try_format(sd, fh->pad, 0));
> +	mutex_unlock(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops ov8856_video_ops = {
> +	.s_stream = ov8856_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov8856_pad_ops = {
> +	.set_fmt = ov8856_set_format,
> +	.get_fmt = ov8856_get_format,
> +	.enum_mbus_code = ov8856_enum_mbus_code,
> +	.enum_frame_size = ov8856_enum_frame_size,
> +};
> +
> +static const struct v4l2_subdev_ops ov8856_subdev_ops = {
> +	.video = &ov8856_video_ops,
> +	.pad = &ov8856_pad_ops,
> +};
> +
> +static const struct media_entity_operations ov8856_subdev_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static const struct v4l2_subdev_internal_ops ov8856_internal_ops = {
> +	.open = ov8856_open,
> +};
> +
> +static int ov8856_identify_module(struct ov8856 *ov8856)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +	int ret;
> +	u32 val;
> +
> +	ret = ov8856_read_reg(ov8856, OV8856_REG_CHIP_ID,
> +			      OV8856_REG_VALUE_24BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val != OV8856_CHIP_ID) {
> +		dev_err(&client->dev, "chip id mismatch: %x!=%x",
> +			OV8856_CHIP_ID, val);
> +		return -ENXIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov8856_check_hwcfg(struct device *dev)
> +{
> +	struct fwnode_handle *ep;
> +	struct fwnode_handle *fwnode = dev_fwnode(dev);
> +	struct v4l2_fwnode_endpoint bus_cfg = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY
> +	};
> +	u32 mclk;
> +	int ret;
> +	unsigned int i, j;
> +
> +	if (!fwnode)
> +		return -ENXIO;
> +
> +	fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
> +	if (mclk != OV8856_MCLK) {
> +		dev_err(dev, "external clock %d is not supported", mclk);
> +		return -EINVAL;
> +	}
> +
> +	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> +	if (!ep)
> +		return -ENXIO;
> +
> +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> +	fwnode_handle_put(ep);
> +	if (ret)
> +		return ret;
> +
> +	if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV8856_DATA_LANES) {
> +		dev_err(dev, "number of CSI2 data lanes %d is not supported",
> +			bus_cfg.bus.mipi_csi2.num_data_lanes);
> +		ret = -EINVAL;
> +		goto check_hwcfg_error;
> +	}
> +
> +	if (!bus_cfg.nr_of_link_frequencies) {
> +		dev_err(dev, "no link frequencies defined");
> +		ret = -EINVAL;
> +		goto check_hwcfg_error;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
> +		for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
> +			if (link_freq_menu_items[i] ==
> +				bus_cfg.link_frequencies[j])
> +				break;
> +		}
> +
> +		if (j == bus_cfg.nr_of_link_frequencies) {
> +			dev_err(dev, "no link frequency %lld supported",
> +				link_freq_menu_items[i]);
> +			ret = -EINVAL;
> +			goto check_hwcfg_error;
> +		}
> +	}
> +
> +check_hwcfg_error:
> +	v4l2_fwnode_endpoint_free(&bus_cfg);
> +
> +	return ret;
> +}
> +
> +static int ov8856_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov8856 *ov8856 = to_ov8856(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +	pm_runtime_disable(&client->dev);
> +	mutex_destroy(&ov8856->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov8856_probe(struct i2c_client *client)
> +{
> +	struct ov8856 *ov8856;
> +	int ret;
> +
> +	ret = ov8856_check_hwcfg(&client->dev);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to check HW configuration: %d",
> +			ret);
> +		return ret;
> +	}
> +
> +	ov8856 = devm_kzalloc(&client->dev, sizeof(*ov8856), GFP_KERNEL);
> +	if (!ov8856)
> +		return -ENOMEM;
> +
> +	v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
> +	ret = ov8856_identify_module(ov8856);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to find sensor: %d", ret);
> +		return ret;
> +	}
> +
> +	mutex_init(&ov8856->mutex);
> +	ov8856->cur_mode = &supported_modes[0];
> +	ret = ov8856_init_controls(ov8856);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to init controls: %d", ret);
> +		goto probe_error_v4l2_ctrl_handler_free;
> +	}
> +
> +	ov8856->sd.internal_ops = &ov8856_internal_ops;
> +	ov8856->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov8856->sd.entity.ops = &ov8856_subdev_entity_ops;
> +	ov8856->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ov8856->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&ov8856->sd.entity, 1, &ov8856->pad);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to init entity pads: %d", ret);
> +		goto probe_error_v4l2_ctrl_handler_free;
> +	}
> +
> +	ret = v4l2_async_register_subdev_sensor_common(&ov8856->sd);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "failed to register V4L2 subdev: %d",
> +			ret);
> +		goto probe_error_media_entity_cleanup;
> +	}
> +
> +	/*
> +	 * Device is already turned on by i2c-core with ACPI domain PM.
> +	 * Enable runtime PM and turn off the device.
> +	 */
> +	pm_runtime_set_active(&client->dev);
> +	pm_runtime_enable(&client->dev);
> +	pm_runtime_idle(&client->dev);
> +
> +	return 0;
> +
> +probe_error_media_entity_cleanup:
> +	media_entity_cleanup(&ov8856->sd.entity);
> +
> +probe_error_v4l2_ctrl_handler_free:
> +	v4l2_ctrl_handler_free(ov8856->sd.ctrl_handler);
> +	mutex_destroy(&ov8856->mutex);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops ov8856_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(ov8856_suspend, ov8856_resume)
> +};
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id ov8856_acpi_ids[] = {
> +	{"OVTI8856"},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, ov8856_acpi_ids);
> +#endif
> +
> +static struct i2c_driver ov8856_i2c_driver = {
> +	.driver = {
> +		.name = "ov8856",
> +		.pm = &ov8856_pm_ops,
> +		.acpi_match_table = ACPI_PTR(ov8856_acpi_ids),
> +	},
> +	.probe_new = ov8856_probe,
> +	.remove = ov8856_remove,
> +};
> +
> +module_i2c_driver(ov8856_i2c_driver);
> +
> +MODULE_AUTHOR("Ben Kao <ben.kao@intel.com>");
> +MODULE_DESCRIPTION("OmniVision OV8856 sensor driver");
> +MODULE_LICENSE("GPL v2");

-- 
Kind regards,

Sakari Ailus
sakari.ailus@linux.intel.com

  reply	other threads:[~2019-01-14 14:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11  3:15 [PATCH v2] media: ov8856: Add support for OV8856 sensor Ben Kao
2019-01-14 14:32 ` Sakari Ailus [this message]
2019-01-15  3:22 ` Tomasz Figa
2019-01-15  5:18   ` Yeh, Andy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190114143255.eumqh5nhcwqft7ng@paasikivi.fi.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=andy.yeh@intel.com \
    --cc=ben.kao@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).