[PATCH v8 0/5] media/sun6i: Allwinner A64 CSI support

[PATCH v8 0/5] media/sun6i: Allwinner A64 CSI support

[Jagan Teki]

Add CSI support for Allwinner A64. Here is previous series[1]

Changes for v8:
- update proper enable and disable sequnce for clk_mod
- fix warning for patch "media: sun6i: Add A64 CSI block support"
- collect Maxime Acked-by
Changes for v7:
- Drop quirk change, and add as suggusted by Maxime
- Use csi instead csi0 in pinctrl function
Changes for v6:
- set the mod rate in seett_power instead of probe
Changes for v5:
- Add mod_rate quirk for better handling clk_set code
Changes for v4:
- update the compatible string order
- add proper commit message
- included BPI-M64 patch
- skipped amarula-a64 patch
Changes for v3:
- update dt-bindings for A64
- set mod clock via csi driver
- remove assign clocks from dtsi
- remove i2c-gpio opendrian
- fix avdd and dovdd supplies
- remove vcc-csi pin group supply

[1] https://patchwork.kernel.org/cover/10779831/

Jagan Teki (5):
  dt-bindings: media: sun6i: Add A64 CSI compatible
  media: sun6i: Add A64 CSI block support
  arm64: dts: allwinner: a64: Add A64 CSI controller
  arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1
  [DO NOT MERGE] arm64: dts: allwinner: bananapi-m64: Add HDF5640 camera module

 .../devicetree/bindings/media/sun6i-csi.txt   |  1 +
 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 65 +++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 11 ++++
 4 files changed, 102 insertions(+)

-- 
2.18.0.321.gffc6fa0e3

[PATCH v8 1/5] dt-bindings: media: sun6i: Add A64 CSI compatible

[Jagan Teki]

Allwinner A64 CSI is a single channel time-multiplexed BT.656
protocol interface.

Add separate compatible string for A64 since it require explicit
change in sun6i_csi driver to update default CSI_SCLK rate.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 Documentation/devicetree/bindings/media/sun6i-csi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
index cc37cf7fd051..0dd540bb03db 100644
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -8,6 +8,7 @@ Required properties:
     * "allwinner,sun6i-a31-csi"
     * "allwinner,sun8i-h3-csi"
     * "allwinner,sun8i-v3s-csi"
+    * "allwinner,sun50i-a64-csi"
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the CSI
-- 
2.18.0.321.gffc6fa0e3

[PATCH v8 2/5] media: sun6i: Add A64 CSI block support

[Jagan Teki]

CSI block in Allwinner A64 has similar features as like in H3,
but the default CSI_SCLK rate cannot work properly to drive the
connected sensor interface.

The tested mod cock rate is 300 MHz and BSP vfe media driver is also
using the same rate. Unfortunately there is no valid information about
clock rate in manual or any other sources except the BSP driver. so more
faith on BSP code, because same has tested in mainline.

So, add support for A64 CSI block by setting updated mod clock rate.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index ee882b66a5ea..5ecdfbf9f6ae 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -15,6 +15,7 @@
 #include <linux/ioctl.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -154,6 +155,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi,
 int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 {
 	struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
+	struct device *dev = sdev->dev;
 	struct regmap *regmap = sdev->regmap;
 	int ret;
 
@@ -161,6 +163,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
 
 		clk_disable_unprepare(sdev->clk_ram);
+		if (of_device_is_compatible(dev->of_node,
+					    "allwinner,sun50i-a64-csi"))
+			clk_rate_exclusive_put(sdev->clk_mod);
 		clk_disable_unprepare(sdev->clk_mod);
 		reset_control_assert(sdev->rstc_bus);
 		return 0;
@@ -172,6 +177,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 		return ret;
 	}
 
+	if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+		clk_set_rate_exclusive(sdev->clk_mod, 300000000);
+
 	ret = clk_prepare_enable(sdev->clk_ram);
 	if (ret) {
 		dev_err(sdev->dev, "Enable clk_dram_csi clk err %d\n", ret);
@@ -191,6 +199,8 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 clk_ram_disable:
 	clk_disable_unprepare(sdev->clk_ram);
 clk_mod_disable:
+	if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+		clk_rate_exclusive_put(sdev->clk_mod);
 	clk_disable_unprepare(sdev->clk_mod);
 	return ret;
 }
@@ -895,6 +905,7 @@ static const struct of_device_id sun6i_csi_of_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-csi", },
 	{ .compatible = "allwinner,sun8i-h3-csi", },
 	{ .compatible = "allwinner,sun8i-v3s-csi", },
+	{ .compatible = "allwinner,sun50i-a64-csi", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sun6i_csi_of_match);
-- 
2.18.0.321.gffc6fa0e3

Re: [PATCH v8 2/5] media: sun6i: Add A64 CSI block support

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 804 bytes --]

On Mon, Jan 28, 2019 at 02:28:44PM +0530, Jagan Teki wrote:
> CSI block in Allwinner A64 has similar features as like in H3,
> but the default CSI_SCLK rate cannot work properly to drive the
> connected sensor interface.
> 
> The tested mod cock rate is 300 MHz and BSP vfe media driver is also
> using the same rate. Unfortunately there is no valid information about
> clock rate in manual or any other sources except the BSP driver. so more
> faith on BSP code, because same has tested in mainline.
> 
> So, add support for A64 CSI block by setting updated mod clock rate.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v8 3/5] arm64: dts: allwinner: a64: Add A64 CSI controller

[Jagan Teki]

Add dts node details for Allwinner A64 CSI controller.

A64 CSI has similar features as like in H3, but the CSI_SCLK
need to update it to 300MHz than default clock rate.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 839b2ae88583..62fdf850e9e5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -558,6 +558,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi";
+			};
+
 			i2c0_pins: i2c0_pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";
@@ -925,6 +931,20 @@
 			status = "disabled";
 		};
 
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3

Re: [PATCH v8 3/5] arm64: dts: allwinner: a64: Add A64 CSI controller

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 479 bytes --]

On Mon, Jan 28, 2019 at 02:28:45PM +0530, Jagan Teki wrote:
> Add dts node details for Allwinner A64 CSI controller.
> 
> A64 CSI has similar features as like in H3, but the CSI_SCLK
> need to update it to 300MHz than default clock rate.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v8 4/5] arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1

[Jagan Teki]

Some camera modules have the SoC feeding a master clock to the sensor
instead of having a standalone crystal. This clock signal is generated
from the clock control unit and output from the CSI MCLK function of
pin PE1.

Add a pinmux setting for it for camera sensors to reference.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 62fdf850e9e5..6e5a608f56f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -564,6 +564,11 @@
 				function = "csi";
 			};
 
+			csi_mclk_pin: csi-mclk {
+				pins = "PE1";
+				function = "csi";
+			};
+
 			i2c0_pins: i2c0_pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";
-- 
2.18.0.321.gffc6fa0e3

[DO NOT MERGE] [PATCH v8 5/5] arm64: dts: allwinner: bananapi-m64: Add HDF5640 camera module

[Jagan Teki]

Bananapi M64 comes with an optional sensor based on the ov5640,
add support for it with below pin information.

- PE13, PE12 via i2c-gpio bitbanging
- CLK_CSI_MCLK as external clock
- PE1 as external clock pin muxing
- DLDO3 as AVDD supply
- ALDO1 as DOVDD supply
- ELDO3 as DVDD supply
- PE16 gpio for reset pin
- PE17 gpio for powerdown pin

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 9d0afd7d50ec..c99f66271287 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,41 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* CSI0-SDA: PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* CSI0-SCK: PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* CSI0-RST: PE16 */
+			powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* CSI0-PWDN: PE17 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -108,6 +143,24 @@
 	status = "okay";
 };
 
+&csi {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
 &dai {
 	status = "okay";
 };
@@ -298,6 +351,12 @@
 	regulator-name = "vcc-wifi";
 };
 
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
 &reg_dldo4 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <3300000>;
@@ -315,6 +374,12 @@
 	regulator-name = "cpvdd";
 };
 
+&reg_eldo3 {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "dvdd-csi";
+};
+
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-- 
2.18.0.321.gffc6fa0e3

Re: [PATCH v8 0/5] media/sun6i: Allwinner A64 CSI support

[Jagan Teki]

Mauro and Maxime,

On Mon, Jan 28, 2019 at 2:29 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Add CSI support for Allwinner A64. Here is previous series[1]
>
> Changes for v8:
> - update proper enable and disable sequnce for clk_mod
> - fix warning for patch "media: sun6i: Add A64 CSI block support"
> - collect Maxime Acked-by
> Changes for v7:
> - Drop quirk change, and add as suggusted by Maxime
> - Use csi instead csi0 in pinctrl function
> Changes for v6:
> - set the mod rate in seett_power instead of probe
> Changes for v5:
> - Add mod_rate quirk for better handling clk_set code
> Changes for v4:
> - update the compatible string order
> - add proper commit message
> - included BPI-M64 patch
> - skipped amarula-a64 patch
> Changes for v3:
> - update dt-bindings for A64
> - set mod clock via csi driver
> - remove assign clocks from dtsi
> - remove i2c-gpio opendrian
> - fix avdd and dovdd supplies
> - remove vcc-csi pin group supply
>
> [1] https://patchwork.kernel.org/cover/10779831/
>
> Jagan Teki (5):
>   dt-bindings: media: sun6i: Add A64 CSI compatible
>   media: sun6i: Add A64 CSI block support
>   arm64: dts: allwinner: a64: Add A64 CSI controller
>   arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1

Any chance to apply this patches? dtsi patch is already been merged
and all been Acked as well.