linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com,
	niklas.soderlund+renesas@ragnatech.se
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3 21/31] v4l: subdev: Improve link format validation debug messages
Date: Tue,  5 Mar 2019 19:51:40 +0100	[thread overview]
Message-ID: <20190305185150.20776-22-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190305185150.20776-1-jacopo+renesas@jmondi.org>

From: Sakari Ailus <sakari.ailus@linux.intel.com>

The existing link format validation failure debug message in media-entity.c
helped to poinpoint the point of failure but provided no additional
information what's wrong. Tell the user exactly why the validation failed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/v4l2-core/v4l2-subdev.c | 40 ++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 9b4f3528a4da..6c96d6f4bdfc 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -629,21 +629,47 @@ int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
 				      struct v4l2_subdev_format *source_fmt,
 				      struct v4l2_subdev_format *sink_fmt)
 {
+	bool pass = true;
+
 	/* The width, height and code must match. */
-	if (source_fmt->format.width != sink_fmt->format.width
-	    || source_fmt->format.height != sink_fmt->format.height
-	    || source_fmt->format.code != sink_fmt->format.code)
-		return -EPIPE;
+	if (source_fmt->format.width != sink_fmt->format.width) {
+		dev_dbg(sd->entity.graph_obj.mdev->dev,
+			"%s: width does not match (source %u, sink %u)\n",
+			__func__,
+			source_fmt->format.width, sink_fmt->format.width);
+		pass = false;
+	}
+
+	if (source_fmt->format.height != sink_fmt->format.height) {
+		dev_dbg(sd->entity.graph_obj.mdev->dev,
+			"%s: height does not match (source %u, sink %u)\n",
+			__func__,
+			source_fmt->format.height, sink_fmt->format.height);
+		pass = false;
+	}
+
+	if (source_fmt->format.code != sink_fmt->format.code) {
+		dev_dbg(sd->entity.graph_obj.mdev->dev,
+			"%s: media bus code does not match (source 0x%8.8x, sink 0x%8.8x)\n",
+			__func__,
+			source_fmt->format.code, sink_fmt->format.code);
+		pass = false;
+	}
 
 	/* The field order must match, or the sink field order must be NONE
 	 * to support interlaced hardware connected to bridges that support
 	 * progressive formats only.
 	 */
 	if (source_fmt->format.field != sink_fmt->format.field &&
-	    sink_fmt->format.field != V4L2_FIELD_NONE)
-		return -EPIPE;
+	    sink_fmt->format.field != V4L2_FIELD_NONE) {
+		dev_dbg(sd->entity.graph_obj.mdev->dev,
+			"%s: field does not match (source %u, sink %u)\n",
+			__func__,
+			source_fmt->format.field, sink_fmt->format.field);
+		pass = false;
+	}
 
-	return 0;
+	return pass ? 0 : -EPIPE;
 }
 EXPORT_SYMBOL_GPL(v4l2_subdev_link_validate_default);
 
-- 
2.20.1


  parent reply	other threads:[~2019-03-05 18:52 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-05 18:51 [PATCH v3 00/31] v4l: add support for multiplexed streams Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 01/31] media: entity: Use pad as a starting point for graph walk Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 02/31] media: entity: Use pads instead of entities in the media graph walk stack Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 03/31] media: entity: Walk the graph based on pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 04/31] v4l: mc: Start walk from a specific pad in use count calculation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 05/31] media: entity: Add iterator helper for entity pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 06/31] media: entity: Move the pipeline from entity to pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 07/31] media: entity: Use pad as the starting point for a pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 08/31] media: entity: Add has_route entity operation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 09/31] media: entity: Add media_has_route() function Jacopo Mondi
2019-03-14 14:45   ` Luca Ceresoli
2019-03-15  9:22     ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 10/31] media: entity: Use routing information during graph traversal Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 11/31] media: entity: Skip link validation for pads to which there is no route to Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 12/31] media: entity: Add an iterator helper for connected pads Jacopo Mondi
2019-03-07 10:09   ` Sakari Ailus
2019-03-07 10:27     ` Ian Arkver
2019-03-07 12:38       ` Sakari Ailus
2019-03-07 20:18       ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 13/31] media: entity: Add only connected pads to the pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 14/31] media: entity: Add debug information in graph walk route check Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 15/31] v4l: Add bus type to frame descriptors Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 16/31] v4l: Add CSI-2 bus configuration " Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 17/31] v4l: Add stream to frame descriptor Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 18/31] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 19/31] media: Documentation: Add GS_ROUTING documentation Jacopo Mondi
2019-03-07 15:19   ` Sakari Ailus
2019-03-08 13:31     ` Jacopo Mondi
2019-03-08 14:14       ` Sakari Ailus
2019-03-14 14:44     ` Luca Ceresoli
2019-03-14 14:43   ` Luca Ceresoli
2020-02-13 13:36   ` Hans Verkuil
2019-03-05 18:51 ` [PATCH v3 20/31] v4l: subdev: Take routing information into account in link validation Jacopo Mondi
2019-03-05 18:51 ` Jacopo Mondi [this message]
2019-03-05 18:51 ` [PATCH v3 22/31] v4l: mc: Add an S_ROUTING helper function for power state changes Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 23/31] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 24/31] adv748x: csi2: only allow formats on sink pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 25/31] adv748x: csi2: describe the multiplexed stream Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 26/31] adv748x: csi2: add internal routing configuration Jacopo Mondi
2019-03-14 14:45   ` Luca Ceresoli
2019-03-15  9:45     ` Jacopo Mondi
2019-03-15 10:06       ` Sakari Ailus
2019-03-16 10:23         ` Luca Ceresoli
2019-03-20 17:14           ` Jacopo Mondi
2019-03-22 16:52             ` Luca Ceresoli
2019-03-28 15:08               ` Jacopo Mondi
2019-03-28 15:17                 ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 27/31] adv748x: afe: add routing support Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 28/31] adv748x: afe: Implement has_route() Jacopo Mondi
2019-03-07 12:49   ` Sakari Ailus
2019-03-14 14:45   ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 29/31] rcar-csi2: use frame description information to configure CSI-2 bus Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 30/31] rcar-csi2: expose the subdevice internal routing Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 31/31] media: rcar-csi2: Implement has_route() Jacopo Mondi
2019-03-07 12:56   ` Sakari Ailus
2019-03-07 22:28     ` Jacopo Mondi
2019-03-07  9:47 ` [PATCH v3 00/31] v4l: add support for multiplexed streams Sakari Ailus
2019-03-08 13:19   ` Jacopo Mondi
2019-03-08 14:12     ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190305185150.20776-22-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).