From: Mauro Carvalho Chehab <mchehab@kernel.org>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: robh+dt@kernel.org, hans.verkuil@cisco.com,
sakari.ailus@linux.intel.com, airlied@linux.ie, daniel@ffwll.ch,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, kernel@pengutronix.de
Subject: Re: [PATCH 5/5] media: tvp5150: add support to limit tv norms on connector
Date: Wed, 20 Mar 2019 11:18:51 -0300 [thread overview]
Message-ID: <20190320111851.1749c9ac@coco.lan> (raw)
In-Reply-To: <20190202121004.9014-6-m.felsch@pengutronix.de>
Em Sat, 2 Feb 2019 13:10:04 +0100
Marco Felsch <m.felsch@pengutronix.de> escreveu:
> The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video
> data and is able to auto-detect the input signal.
Hmm... I'm afraid of this change. As far as I remember, I tested some
weird format variants like V4L2_STD_PAL_60 a long time ago, but there's
no way to force video to use those. The format selection logic simply
places the device on auto-detect mode for those weirdos, and that
works fine at the devices I know.
A change like that may break things. So I would actually have a quirk
to optionally disable auto-detection on devices that this is not know
to work.
> The auto-detection
> does not work if the connector does not receive an input signal and the
> tvp5150 might not be configured correctly. This misconfiguration leads
> into wrong decoded video streams if the tvp5150 gets powered on before
> the video signal is present.
>
> Limit the supported tv norms according to the actual selected connector
> to avoid a misconfiguration.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> drivers/media/i2c/tvp5150.c | 42 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 41 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index f3a2ad00a40d..7619793dee67 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -32,6 +32,13 @@
> #define TVP5150_MBUS_FMT MEDIA_BUS_FMT_UYVY8_2X8
> #define TVP5150_FIELD V4L2_FIELD_ALTERNATE
> #define TVP5150_COLORSPACE V4L2_COLORSPACE_SMPTE170M
> +#define TVP5150_STD_MASK (V4L2_STD_NTSC | \
> + V4L2_STD_NTSC_443 | \
> + V4L2_STD_PAL | \
> + V4L2_STD_PAL_M | \
> + V4L2_STD_PAL_N | \
> + V4L2_STD_PAL_Nc | \
> + V4L2_STD_SECAM)
>
> MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
> MODULE_AUTHOR("Mauro Carvalho Chehab");
> @@ -74,6 +81,7 @@ struct tvp5150 {
> struct media_pad pads[TVP5150_NUM_PADS];
> int pads_state[TVP5150_NUM_PADS];
> struct tvp5150_connector *connectors;
> + struct tvp5150_connector *cur_connector;
> int connectors_num;
> bool modify_second_link;
> #endif
> @@ -794,17 +802,27 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
> static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
> {
> struct tvp5150 *decoder = to_tvp5150(sd);
> + v4l2_std_id supported_norms =
> + decoder->cur_connector->base.connector.analog.supported_tvnorms;
>
> if (decoder->norm == std)
> return 0;
>
> + /*
> + * check if requested std or group of std's is/are supported by the
> + * connector
> + */
> + if ((supported_norms & std) == 0)
> + return -EINVAL;
> +
> /* Change cropping height limits */
> if (std & V4L2_STD_525_60)
> decoder->rect.height = TVP5150_V_MAX_525_60;
> else
> decoder->rect.height = TVP5150_V_MAX_OTHERS;
>
> - decoder->norm = std;
> + /* set only the specific supported std in case of group of std's */
> + decoder->norm = supported_norms & std;
>
> return tvp5150_set_std(sd, std);
> }
> @@ -1298,6 +1316,7 @@ static int tvp5150_link_setup(struct media_entity *entity,
> int *pad_state = &decoder->pads_state[0];
> int i, active_pad, ret = 0;
> bool is_svideo = false;
> + bool update_cur_connector = false;
>
> /*
> * The tvp state is determined by the enabled sink pad link.
> @@ -1344,10 +1363,12 @@ static int tvp5150_link_setup(struct media_entity *entity,
> decoder->modify_second_link = false;
> tvp5150_s_routing(sd, TVP5150_SVIDEO,
> TVP5150_NORMAL, 0);
> + update_cur_connector = true;
> }
> } else {
> tvp5150_s_routing(sd, tvp5150_pad->index,
> TVP5150_NORMAL, 0);
> + update_cur_connector = true;
> }
> } else {
> /*
> @@ -1376,6 +1397,14 @@ static int tvp5150_link_setup(struct media_entity *entity,
> active_pad, TVP5150_BLACK_SCREEN, 0);
> decoder->modify_second_link = false;
> }
> +
> + if (update_cur_connector) {
> + /* Update tvnorm according to connector */
> + decoder->cur_connector =
> + container_of(remote, struct tvp5150_connector, pad);
> + tvp5150_s_std(sd,
> + decoder->cur_connector->base.connector.analog.supported_tvnorms);
> + }
> out:
> return ret;
> }
> @@ -1605,6 +1634,9 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
> }
> tvp5150_selmux(sd);
> decoder->modify_second_link = false;
> + decoder->cur_connector = &decoder->connectors[i];
> + tvp5150_s_std(sd,
> + decoder->connectors[i].base.connector.analog.supported_tvnorms);
> }
> }
> #endif
> @@ -1925,6 +1957,14 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> ret = -EINVAL;
> goto err;
> }
> + if (!(c.connector.analog.supported_tvnorms &
> + TVP5150_STD_MASK)) {
> + dev_err(dev,
> + "Invalid tv norm(s) on connector %s.\n",
> + c.label);
> + ret = -EINVAL;
> + goto err;
> + }
> in++;
> break;
> case TVP5150_PAD_VID_OUT:
Thanks,
Mauro
next prev parent reply other threads:[~2019-03-20 14:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-02 12:09 [PATCH 0/5] TV norms limit and TVP5150 implementation Marco Felsch
2019-02-02 12:10 ` [PATCH 1/5] dt-bindings: connector: analog: add tv norms property Marco Felsch
2019-02-25 20:11 ` Rob Herring
2019-02-02 12:10 ` [PATCH 2/5] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-02-02 12:10 ` [PATCH 3/5] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-02-02 12:10 ` [PATCH 4/5] media: tvp5150: make use of generic connector parsing Marco Felsch
2019-02-02 12:10 ` [PATCH 5/5] media: tvp5150: add support to limit tv norms on connector Marco Felsch
2019-03-20 14:18 ` Mauro Carvalho Chehab [this message]
2019-03-20 16:36 ` Marco Felsch
2019-03-20 17:29 ` Mauro Carvalho Chehab
2019-03-21 9:53 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190320111851.1749c9ac@coco.lan \
--to=mchehab@kernel.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hans.verkuil@cisco.com \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).