Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
	robh+dt@kernel.org
Cc: laurent.pinchart@ideasonboard.com, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, kernel@pengutronix.de,
	Javier Martinez Canillas <javierm@redhat.com>,
	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
	Rob Herring <robh@kernel.org>
Subject: [PATCH v6 04/13] partial revert of "[media] tvp5150: add HW input connectors support"
Date: Mon, 15 Apr 2019 14:44:04 +0200
Message-ID: <20190415124413.18456-5-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20190415124413.18456-1-m.felsch@pengutronix.de>

From: Javier Martinez Canillas <javierm@redhat.com>

Commit f7b4b54e6364 ("[media] tvp5150: add HW input connectors support")
added input signals support for the tvp5150, but the approach was found
to be incorrect so the corresponding DT binding commit 82c2ffeb217a
("[media] tvp5150: document input connectors DT bindings") was reverted.

This left the driver with an undocumented (and wrong) DT parsing logic,
so lets get rid of this code as well until the input connectors support
is implemented properly.

It's a partial revert due other patches added on top of mentioned commit
not allowing the commit to be reverted cleanly anymore. But all the code
related to the DT parsing logic and input entities creation are removed.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[m.felsch@pengutronix.de: rm TVP5150_INPUT_NUM define]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 drivers/media/i2c/tvp5150.c         | 141 ----------------------------
 include/dt-bindings/media/tvp5150.h |   2 -
 2 files changed, 143 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index eaddd977ba40..89da921c8886 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -53,8 +53,6 @@ struct tvp5150 {
 	struct v4l2_subdev sd;
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pads[TVP5150_NUM_PADS];
-	struct media_entity input_ent[TVP5150_INPUT_NUM];
-	struct media_pad input_pad[TVP5150_INPUT_NUM];
 #endif
 	struct v4l2_ctrl_handler hdl;
 	struct v4l2_rect rect;
@@ -1169,40 +1167,6 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
 	return 0;
 }
 
-/****************************************************************************
-			Media entity ops
- ****************************************************************************/
-
-#ifdef CONFIG_MEDIA_CONTROLLER
-static int tvp5150_link_setup(struct media_entity *entity,
-			      const struct media_pad *local,
-			      const struct media_pad *remote, u32 flags)
-{
-	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	int i;
-
-	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
-		if (remote->entity == &decoder->input_ent[i])
-			break;
-	}
-
-	/* Do nothing for entities that are not input connectors */
-	if (i == TVP5150_INPUT_NUM)
-		return 0;
-
-	decoder->input = i;
-
-	tvp5150_selmux(sd);
-
-	return 0;
-}
-
-static const struct media_entity_operations tvp5150_sd_media_ops = {
-	.link_setup = tvp5150_link_setup,
-};
-#endif
-
 /****************************************************************************
 			I2C Command
  ****************************************************************************/
@@ -1350,42 +1314,6 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	return 0;
 }
 
-static int tvp5150_registered(struct v4l2_subdev *sd)
-{
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
-		struct media_entity *input = &decoder->input_ent[i];
-		struct media_pad *pad = &decoder->input_pad[i];
-
-		if (!input->name)
-			continue;
-
-		decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
-
-		ret = media_entity_pads_init(input, 1, pad);
-		if (ret < 0)
-			return ret;
-
-		ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
-		if (ret < 0)
-			return ret;
-
-		ret = media_create_pad_link(input, 0, &sd->entity,
-					    TVP5150_PAD_IF_INPUT, 0);
-		if (ret < 0) {
-			media_device_unregister_entity(input);
-			return ret;
-		}
-	}
-#endif
-
-	return 0;
-}
-
 /* ----------------------------------------------------------------------- */
 
 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
@@ -1439,10 +1367,6 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
 	.pad = &tvp5150_pad_ops,
 };
 
-static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
-	.registered = tvp5150_registered,
-};
-
 /****************************************************************************
 			I2C Client & Driver
  ****************************************************************************/
@@ -1595,12 +1519,6 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
 {
 	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
 	struct device_node *ep;
-#ifdef CONFIG_MEDIA_CONTROLLER
-	struct device_node *connectors, *child;
-	struct media_entity *input;
-	const char *name;
-	u32 input_type;
-#endif
 	unsigned int flags;
 	int ret = 0;
 
@@ -1624,63 +1542,6 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
 
 	decoder->mbus_type = bus_cfg.bus_type;
 
-#ifdef CONFIG_MEDIA_CONTROLLER
-	connectors = of_get_child_by_name(np, "connectors");
-
-	if (!connectors)
-		goto err;
-
-	for_each_available_child_of_node(connectors, child) {
-		ret = of_property_read_u32(child, "input", &input_type);
-		if (ret) {
-			dev_err(decoder->sd.dev,
-				 "missing type property in node %pOFn\n",
-				 child);
-			goto err_connector;
-		}
-
-		if (input_type >= TVP5150_INPUT_NUM) {
-			ret = -EINVAL;
-			goto err_connector;
-		}
-
-		input = &decoder->input_ent[input_type];
-
-		/* Each input connector can only be defined once */
-		if (input->name) {
-			dev_err(decoder->sd.dev,
-				 "input %s with same type already exists\n",
-				 input->name);
-			ret = -EINVAL;
-			goto err_connector;
-		}
-
-		switch (input_type) {
-		case TVP5150_COMPOSITE0:
-		case TVP5150_COMPOSITE1:
-			input->function = MEDIA_ENT_F_CONN_COMPOSITE;
-			break;
-		case TVP5150_SVIDEO:
-			input->function = MEDIA_ENT_F_CONN_SVIDEO;
-			break;
-		}
-
-		input->flags = MEDIA_ENT_FL_CONNECTOR;
-
-		ret = of_property_read_string(child, "label", &name);
-		if (ret < 0) {
-			dev_err(decoder->sd.dev,
-				 "missing label property in node %pOFn\n",
-				 child);
-			goto err_connector;
-		}
-
-		input->name = name;
-	}
-
-err_connector:
-	of_node_put(connectors);
-#endif
 err:
 	of_node_put(ep);
 	return ret;
@@ -1732,7 +1593,6 @@ static int tvp5150_probe(struct i2c_client *c,
 	}
 
 	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
-	sd->internal_ops = &tvp5150_internal_ops;
 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 
 #if defined(CONFIG_MEDIA_CONTROLLER)
@@ -1747,7 +1607,6 @@ static int tvp5150_probe(struct i2c_client *c,
 	if (res < 0)
 		return res;
 
-	sd->entity.ops = &tvp5150_sd_media_ops;
 #endif
 
 	res = tvp5150_detect_version(core);
diff --git a/include/dt-bindings/media/tvp5150.h b/include/dt-bindings/media/tvp5150.h
index c852a35e916e..8637910aae76 100644
--- a/include/dt-bindings/media/tvp5150.h
+++ b/include/dt-bindings/media/tvp5150.h
@@ -26,8 +26,6 @@
 #define TVP5150_COMPOSITE1 1
 #define TVP5150_SVIDEO     2
 
-#define TVP5150_INPUT_NUM  3
-
 /* TVP5150 HW outputs */
 #define TVP5150_NORMAL       0
 #define TVP5150_BLACK_SCREEN 1
-- 
2.20.1


  parent reply index

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-15 12:44 [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-04-15 12:44 ` [PATCH v6 01/13] dt-bindings: connector: analog: add tv norms property Marco Felsch
2019-05-06 10:01   ` Hans Verkuil
2019-05-06 10:06     ` Hans Verkuil
2019-05-14 18:11     ` Mauro Carvalho Chehab
2019-05-16 16:27   ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 02/13] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-05-06  9:50   ` Hans Verkuil
2019-05-14 18:17     ` Mauro Carvalho Chehab
2019-05-16 16:36   ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 03/13] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-05-06 10:10   ` Hans Verkuil
2019-05-14 18:20     ` Mauro Carvalho Chehab
2019-05-16 16:51       ` Laurent Pinchart
2019-04-15 12:44 ` Marco Felsch [this message]
2019-04-15 12:44 ` [PATCH v6 05/13] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-05-06 10:09   ` Jacopo Mondi
2019-05-14 18:25   ` Mauro Carvalho Chehab
2019-05-16 18:03     ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 06/13] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-05-14 18:27   ` Mauro Carvalho Chehab
2019-05-16 18:05   ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 07/13] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-05-06 13:36   ` Jacopo Mondi
2019-05-14 18:48   ` Mauro Carvalho Chehab
2019-04-15 12:44 ` [PATCH v6 08/13] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-05-14 20:20   ` Mauro Carvalho Chehab
2019-04-15 12:44 ` [PATCH v6 09/13] media: tvp5150: add s_power callback Marco Felsch
2019-05-14 20:13   ` Mauro Carvalho Chehab
2019-04-15 12:44 ` [PATCH v6 10/13] media: dt-bindings: tvp5150: cleanup bindings stlye Marco Felsch
2019-04-15 12:44 ` [PATCH v6 11/13] media: dt-bindings: tvp5150: add optional tvnorms documentation Marco Felsch
2019-04-15 12:44 ` [PATCH v6 12/13] media: tvp5150: add support to limit tv norms on connector Marco Felsch
2019-05-16 18:07   ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 13/13] media: tvp5150: make debug output more readable Marco Felsch
2019-05-06 13:39   ` Jacopo Mondi
2019-05-14 20:18     ` Mauro Carvalho Chehab
2019-05-06  5:47 ` [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-05-14 17:18   ` Mauro Carvalho Chehab
2019-05-14 20:20     ` Mauro Carvalho Chehab
2019-05-14 20:58       ` Marco Felsch
2019-05-14 23:41         ` Mauro Carvalho Chehab

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190415124413.18456-5-m.felsch@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=javierm@redhat.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab+samsung@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org linux-media@archiver.kernel.org
	public-inbox-index linux-media


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/ public-inbox