Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller
@ 2019-05-20 15:06 megous
  2019-05-20 15:06 ` [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant megous
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: megous @ 2019-05-20 15:06 UTC (permalink / raw)
  To: Chen-Yu Tsai, Maxime Ripard, Michael Turquette, Stephen Boyd,
	Rob Herring, Mark Rutland, Yong Deng, Mauro Carvalho Chehab
  Cc: Ondrej Jirman, devicetree, linux-kernel, Paul Kocialkowski,
	Chen-Yu Tsai, linux-clk, linux-arm-kernel, linux-media

From: Ondrej Jirman <megous@megous.com>

This is a re-send of Chen-Yu's A83T CSI patch series with review tags
applied and removed address/size cells from csi_in port. Already applied
patches from v1  were dropped.

The series is ready to be merged:

  Patch 1 and 2 via sunxi tree
  Patch 3 via media tree

v2:
- dropped address/size cells from csi_in port
- added review tags

Please take a look and merge.

Thank you,
	Ondrej

--------------------------
Original description:

Hi everyone,

This series adds support for the camera sensor interface controller
found on the Allwinner A83T SoC. The controller is similar to the one
found on  the H3, with the addition of a MIPI CSI-2 interface. However,
this series only supports parallel and BT.656 interfaces, based on the
existing driver.

Patch 1 adds an undocumented clock parent of the CSI MCLK. This was
found after finding the default value to sometimes work and sometimes
not, and then comparing against BSP code.

Patch 2 adds a compatible string for the A83T variant.

Patch 3 adds support for the A83T variant to the existing sun6i-csi
driver.

Patch 4 adds a device node for the controller, as well as commonly
used pin muxing options.

Patch 5 adds a pin muxing option for I2C1 on the PE pins, used in
conjunction with the CSI pins.

Patch 6 provides an example usage of the CSI controller: the Bananapi M3
with its camera module attached.

Please have a look.

Regards
ChenYu

Chen-Yu Tsai (3):
  dt-bindings: media: sun6i-csi: Add compatible string for A83T variant
  media: sun6i: Support A83T variant
  ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor
    Interface)

 .../devicetree/bindings/media/sun6i-csi.txt   |  1 +
 arch/arm/boot/dts/sun8i-a83t.dtsi             | 29 +++++++++++++++++++
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  1 +
 3 files changed, 31 insertions(+)

-- 
2.21.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant
  2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
@ 2019-05-20 15:06 ` megous
  2019-05-20 15:06 ` [PATCH v2 2/3] media: sun6i: Support " megous
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 8+ messages in thread
From: megous @ 2019-05-20 15:06 UTC (permalink / raw)
  To: Chen-Yu Tsai, Maxime Ripard, Michael Turquette, Stephen Boyd,
	Rob Herring, Mark Rutland, Yong Deng, Mauro Carvalho Chehab
  Cc: Chen-Yu Tsai, devicetree, linux-kernel, Paul Kocialkowski,
	linux-clk, linux-arm-kernel, linux-media, Rob Herring

From: Chen-Yu Tsai <wens@csie.org>

The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.

Add a compatible string for this variant.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/media/sun6i-csi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
index 0dd540bb03db..a2e3e56f0257 100644
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -6,6 +6,7 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
 Required properties:
   - compatible: value must be one of:
     * "allwinner,sun6i-a31-csi"
+    * "allwinner,sun8i-a83t-csi"
     * "allwinner,sun8i-h3-csi"
     * "allwinner,sun8i-v3s-csi"
     * "allwinner,sun50i-a64-csi"
-- 
2.21.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] media: sun6i: Support A83T variant
  2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
  2019-05-20 15:06 ` [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant megous
@ 2019-05-20 15:06 ` " megous
  2019-05-20 15:06 ` [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) megous
  2019-05-20 15:10 ` [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller Ondřej Jirman
  3 siblings, 0 replies; 8+ messages in thread
From: megous @ 2019-05-20 15:06 UTC (permalink / raw)
  To: Chen-Yu Tsai, Maxime Ripard, Michael Turquette, Stephen Boyd,
	Rob Herring, Mark Rutland, Yong Deng, Mauro Carvalho Chehab
  Cc: Chen-Yu Tsai, devicetree, linux-kernel, Paul Kocialkowski,
	linux-clk, linux-arm-kernel, linux-media

From: Chen-Yu Tsai <wens@csie.org>

The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.

Add support for this variant.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 4c79eb64a7a7..6e0e894154f4 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -924,6 +924,7 @@ static int sun6i_csi_remove(struct platform_device *pdev)
 
 static const struct of_device_id sun6i_csi_of_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-csi", },
+	{ .compatible = "allwinner,sun8i-a83t-csi", },
 	{ .compatible = "allwinner,sun8i-h3-csi", },
 	{ .compatible = "allwinner,sun8i-v3s-csi", },
 	{ .compatible = "allwinner,sun50i-a64-csi", },
-- 
2.21.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
  2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
  2019-05-20 15:06 ` [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant megous
  2019-05-20 15:06 ` [PATCH v2 2/3] media: sun6i: Support " megous
@ 2019-05-20 15:06 ` megous
  2019-05-29 11:12   ` Maxime Ripard
  2019-05-20 15:10 ` [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller Ondřej Jirman
  3 siblings, 1 reply; 8+ messages in thread
From: megous @ 2019-05-20 15:06 UTC (permalink / raw)
  To: Chen-Yu Tsai, Maxime Ripard, Michael Turquette, Stephen Boyd,
	Rob Herring, Mark Rutland, Yong Deng, Mauro Carvalho Chehab
  Cc: Chen-Yu Tsai, devicetree, linux-kernel, Paul Kocialkowski,
	linux-clk, linux-arm-kernel, linux-media, Ondrej Jirman

From: Chen-Yu Tsai <wens@csie.org>

The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.

Add a device node for it, and pinctrl nodes for the commonly used MCLK
and 8-bit parallel interface. The property /omit-if-no-ref/ is added to
the pinctrl nodes to keep the device tree blob size down if they are
unused.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 392b0cabbf0d..ada6d08bc540 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -679,6 +679,20 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
 			emac_rgmii_pins: emac-rgmii-pins {
 				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
 				       "PD11", "PD12", "PD13", "PD14", "PD18",
@@ -997,6 +1011,21 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+
+			csi_in: port {
+			};
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
-- 
2.21.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller
  2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
                   ` (2 preceding siblings ...)
  2019-05-20 15:06 ` [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) megous
@ 2019-05-20 15:10 ` Ondřej Jirman
  2019-05-28 13:03   ` Chen-Yu Tsai
  3 siblings, 1 reply; 8+ messages in thread
From: Ondřej Jirman @ 2019-05-20 15:10 UTC (permalink / raw)
  To: Chen-Yu Tsai, Maxime Ripard, Michael Turquette, Stephen Boyd,
	Rob Herring, Mark Rutland, Yong Deng, Mauro Carvalho Chehab
  Cc: devicetree, linux-kernel, Paul Kocialkowski, Chen-Yu Tsai,
	linux-clk, linux-arm-kernel, linux-media

On Mon, May 20, 2019 at 05:06:34PM +0200, verejna wrote:
> From: Ondrej Jirman <megous@megous.com>
> 
> This is a re-send of Chen-Yu's A83T CSI patch series with review tags
> applied and removed address/size cells from csi_in port. Already applied
> patches from v1  were dropped.
> 
> The series is ready to be merged:
> 
>   Patch 1 and 2 via sunxi tree
>   Patch 3 via media tree

Sorry, wrong numbers. 2 is for media tree, 3 is for sunxi, 1 is a dt-bindings
patch, where I'm not sure.

thanks,
	Ondrej

> v2:
> - dropped address/size cells from csi_in port
> - added review tags
> 
> Please take a look and merge.
> 
> Thank you,
> 	Ondrej
> 
> --------------------------
> Original description:
> 
> Hi everyone,
> 
> This series adds support for the camera sensor interface controller
> found on the Allwinner A83T SoC. The controller is similar to the one
> found on  the H3, with the addition of a MIPI CSI-2 interface. However,
> this series only supports parallel and BT.656 interfaces, based on the
> existing driver.
> 
> Patch 1 adds an undocumented clock parent of the CSI MCLK. This was
> found after finding the default value to sometimes work and sometimes
> not, and then comparing against BSP code.
> 
> Patch 2 adds a compatible string for the A83T variant.
> 
> Patch 3 adds support for the A83T variant to the existing sun6i-csi
> driver.
> 
> Patch 4 adds a device node for the controller, as well as commonly
> used pin muxing options.
> 
> Patch 5 adds a pin muxing option for I2C1 on the PE pins, used in
> conjunction with the CSI pins.
> 
> Patch 6 provides an example usage of the CSI controller: the Bananapi M3
> with its camera module attached.
> 
> Please have a look.
> 
> Regards
> ChenYu
> 
> Chen-Yu Tsai (3):
>   dt-bindings: media: sun6i-csi: Add compatible string for A83T variant
>   media: sun6i: Support A83T variant
>   ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor
>     Interface)
> 
>  .../devicetree/bindings/media/sun6i-csi.txt   |  1 +
>  arch/arm/boot/dts/sun8i-a83t.dtsi             | 29 +++++++++++++++++++
>  .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  1 +
>  3 files changed, 31 insertions(+)
> 
> -- 
> 2.21.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller
  2019-05-20 15:10 ` [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller Ondřej Jirman
@ 2019-05-28 13:03   ` Chen-Yu Tsai
  2019-05-29 10:11     ` Sakari Ailus
  0 siblings, 1 reply; 8+ messages in thread
From: Chen-Yu Tsai @ 2019-05-28 13:03 UTC (permalink / raw)
  To: Sakari Ailus, Ondrej Jirman
  Cc: devicetree, linux-kernel, Paul Kocialkowski, Yong Deng,
	linux-arm-kernel, Linux Media Mailing List, Chen-Yu Tsai,
	Maxime Ripard, Mauro Carvalho Chehab

On Mon, May 20, 2019 at 11:10 PM Ondřej Jirman <megous@megous.com> wrote:
>
> On Mon, May 20, 2019 at 05:06:34PM +0200, verejna wrote:
> > From: Ondrej Jirman <megous@megous.com>
> >
> > This is a re-send of Chen-Yu's A83T CSI patch series with review tags
> > applied and removed address/size cells from csi_in port. Already applied
> > patches from v1  were dropped.
> >
> > The series is ready to be merged:
> >
> >   Patch 1 and 2 via sunxi tree
> >   Patch 3 via media tree
>
> Sorry, wrong numbers. 2 is for media tree, 3 is for sunxi, 1 is a dt-bindings
> patch, where I'm not sure.

Bindings typically go with the driver.

Sakari, this series is and has been ready for some time since before the merge
window. Could you please merge patches 1 and 2.


Thanks
ChenYu


>
> thanks,
>         Ondrej
>
> > v2:
> > - dropped address/size cells from csi_in port
> > - added review tags
> >
> > Please take a look and merge.
> >
> > Thank you,
> >       Ondrej
> >
> > --------------------------
> > Original description:
> >
> > Hi everyone,
> >
> > This series adds support for the camera sensor interface controller
> > found on the Allwinner A83T SoC. The controller is similar to the one
> > found on  the H3, with the addition of a MIPI CSI-2 interface. However,
> > this series only supports parallel and BT.656 interfaces, based on the
> > existing driver.
> >
> > Patch 1 adds an undocumented clock parent of the CSI MCLK. This was
> > found after finding the default value to sometimes work and sometimes
> > not, and then comparing against BSP code.
> >
> > Patch 2 adds a compatible string for the A83T variant.
> >
> > Patch 3 adds support for the A83T variant to the existing sun6i-csi
> > driver.
> >
> > Patch 4 adds a device node for the controller, as well as commonly
> > used pin muxing options.
> >
> > Patch 5 adds a pin muxing option for I2C1 on the PE pins, used in
> > conjunction with the CSI pins.
> >
> > Patch 6 provides an example usage of the CSI controller: the Bananapi M3
> > with its camera module attached.
> >
> > Please have a look.
> >
> > Regards
> > ChenYu
> >
> > Chen-Yu Tsai (3):
> >   dt-bindings: media: sun6i-csi: Add compatible string for A83T variant
> >   media: sun6i: Support A83T variant
> >   ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor
> >     Interface)
> >
> >  .../devicetree/bindings/media/sun6i-csi.txt   |  1 +
> >  arch/arm/boot/dts/sun8i-a83t.dtsi             | 29 +++++++++++++++++++
> >  .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  1 +
> >  3 files changed, 31 insertions(+)
> >
> > --
> > 2.21.0
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller
  2019-05-28 13:03   ` Chen-Yu Tsai
@ 2019-05-29 10:11     ` Sakari Ailus
  0 siblings, 0 replies; 8+ messages in thread
From: Sakari Ailus @ 2019-05-29 10:11 UTC (permalink / raw)
  To: Chen-Yu Tsai
  Cc: Ondrej Jirman, devicetree, linux-kernel, Paul Kocialkowski,
	Yong Deng, linux-arm-kernel, Linux Media Mailing List,
	Maxime Ripard, Mauro Carvalho Chehab

Hi Chen-Yu,

On Tue, May 28, 2019 at 09:03:06PM +0800, Chen-Yu Tsai wrote:
> On Mon, May 20, 2019 at 11:10 PM Ondřej Jirman <megous@megous.com> wrote:
> >
> > On Mon, May 20, 2019 at 05:06:34PM +0200, verejna wrote:
> > > From: Ondrej Jirman <megous@megous.com>
> > >
> > > This is a re-send of Chen-Yu's A83T CSI patch series with review tags
> > > applied and removed address/size cells from csi_in port. Already applied
> > > patches from v1  were dropped.
> > >
> > > The series is ready to be merged:
> > >
> > >   Patch 1 and 2 via sunxi tree
> > >   Patch 3 via media tree
> >
> > Sorry, wrong numbers. 2 is for media tree, 3 is for sunxi, 1 is a dt-bindings
> > patch, where I'm not sure.
> 
> Bindings typically go with the driver.
> 
> Sakari, this series is and has been ready for some time since before the merge
> window. Could you please merge patches 1 and 2.

Don't wait, instead cc or ping me; that helps. :-)

The two patches are fine; I'll merge them.

-- 
Kind regards,

Sakari Ailus
sakari.ailus@linux.intel.com

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
  2019-05-20 15:06 ` [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) megous
@ 2019-05-29 11:12   ` Maxime Ripard
  0 siblings, 0 replies; 8+ messages in thread
From: Maxime Ripard @ 2019-05-29 11:12 UTC (permalink / raw)
  To: megous
  Cc: Chen-Yu Tsai, Michael Turquette, Stephen Boyd, Rob Herring,
	Mark Rutland, Yong Deng, Mauro Carvalho Chehab, Chen-Yu Tsai,
	devicetree, linux-kernel, Paul Kocialkowski, linux-clk,
	linux-arm-kernel, linux-media

[-- Attachment #1: Type: text/plain, Size: 780 bytes --]

On Mon, May 20, 2019 at 05:06:37PM +0200, megous@megous.com wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> The A83T SoC has a camera sensor interface (known as CSI in Allwinner
> lingo), which is similar to the one found on the A64 and H3. The only
> difference seems to be that support of MIPI CSI through a connected
> MIPI CSI-2 bridge.
>
> Add a device node for it, and pinctrl nodes for the commonly used MCLK
> and 8-bit parallel interface. The property /omit-if-no-ref/ is added to
> the pinctrl nodes to keep the device tree blob size down if they are
> unused.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
2019-05-20 15:06 ` [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant megous
2019-05-20 15:06 ` [PATCH v2 2/3] media: sun6i: Support " megous
2019-05-20 15:06 ` [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) megous
2019-05-29 11:12   ` Maxime Ripard
2019-05-20 15:10 ` [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller Ondřej Jirman
2019-05-28 13:03   ` Chen-Yu Tsai
2019-05-29 10:11     ` Sakari Ailus

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org linux-media@archiver.kernel.org
	public-inbox-index linux-media


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/ public-inbox