Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: megous@megous.com
To: Chen-Yu Tsai <wens@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Yong Deng <yong.deng@magewell.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, Ondrej Jirman <megous@megous.com>
Subject: [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
Date: Mon, 20 May 2019 17:06:37 +0200
Message-ID: <20190520150637.23557-4-megous@megous.com> (raw)
In-Reply-To: <20190520150637.23557-1-megous@megous.com>

From: Chen-Yu Tsai <wens@csie.org>

The A83T SoC has a camera sensor interface (known as CSI in Allwinner
lingo), which is similar to the one found on the A64 and H3. The only
difference seems to be that support of MIPI CSI through a connected
MIPI CSI-2 bridge.

Add a device node for it, and pinctrl nodes for the commonly used MCLK
and 8-bit parallel interface. The property /omit-if-no-ref/ is added to
the pinctrl nodes to keep the device tree blob size down if they are
unused.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 392b0cabbf0d..ada6d08bc540 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -679,6 +679,20 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
 			emac_rgmii_pins: emac-rgmii-pins {
 				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
 				       "PD11", "PD12", "PD13", "PD14", "PD18",
@@ -997,6 +1011,21 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+
+			csi_in: port {
+			};
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
-- 
2.21.0


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 15:06 [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller megous
2019-05-20 15:06 ` [PATCH v2 1/3] dt-bindings: media: sun6i-csi: Add compatible string for A83T variant megous
2019-05-20 15:06 ` [PATCH v2 2/3] media: sun6i: Support " megous
2019-05-20 15:06 ` megous [this message]
2019-05-29 11:12   ` [PATCH v2 3/3] ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) Maxime Ripard
2019-05-20 15:10 ` [PATCH v2 0/3] ARM: sun8i: a83t: Support Camera Sensor Interface controller Ondřej Jirman
2019-05-28 13:03   ` Chen-Yu Tsai
2019-05-29 10:11     ` Sakari Ailus

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520150637.23557-4-megous@megous.com \
    --to=megous@megous.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=wens@csie.org \
    --cc=wens@kernel.org \
    --cc=yong.deng@magewell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org linux-media@archiver.kernel.org
	public-inbox-index linux-media


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/ public-inbox