Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
@ 2019-05-20 20:18 Marek Vasut
  2019-05-20 20:18 ` [PATCH 2/2] media: i2c: isl7998x: Add driver for Intersil ISL7998x Marek Vasut
  2019-05-28 11:47 ` [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Jacopo Mondi
  0 siblings, 2 replies; 12+ messages in thread
From: Marek Vasut @ 2019-05-20 20:18 UTC (permalink / raw)
  To: linux-media
  Cc: Marek Vasut, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

Add bindings for the Intersil ISL7998x BT656-to-MIPI-CSI2 decoder.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
To: linux-media@vger.kernel.org
---
 .../bindings/media/i2c/isl7998x.txt           | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/isl7998x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/isl7998x.txt b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
new file mode 100644
index 000000000000..c21703983360
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
@@ -0,0 +1,37 @@
+Intersil ISL7998x BT656-to-MIPI-CSI2 decoder
+
+The Intersil ISL7998x is a BT656-to-MIPI-CSI decoder which, capable of
+receiving up to four analog stream and multiplexing them into up to four
+MIPI CSI2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+Required Properties:
+- compatible: value should be "isil,isl79987"
+- pd-gpios: a GPIO spec for the Power Down pin (active high)
+
+Option Properties:
+- isil,num-inputs: Number of connected inputs (1, 2 or 4)
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c_master {
+		isl7998x_mipi@44 {
+			compatible = "isil,isl79987";
+			reg = <0x44>;
+			isil,num-inputs = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_videoadc>;
+			pd-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+
+			port {
+				isl79987_to_mipi_csi2: endpoint {
+					remote-endpoint = <&mipi_csi2_in>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
-- 
2.20.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 2/2] media: i2c: isl7998x: Add driver for Intersil ISL7998x
  2019-05-20 20:18 [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Marek Vasut
@ 2019-05-20 20:18 ` Marek Vasut
  2019-05-28 11:47 ` [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Jacopo Mondi
  1 sibling, 0 replies; 12+ messages in thread
From: Marek Vasut @ 2019-05-20 20:18 UTC (permalink / raw)
  To: linux-media; +Cc: Marek Vasut, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring

Add driver for the Intersil ISL7998x BT656-to-MIPI-CSI2 video decoder.
This chip supports 1/2/4 analog video inputs and converts them into
1/2/4 VCs in MIPI CSI2 stream.

This driver currently supports ISL79987 and both 720x480 and 720x576
resolutions, however as per specification, all inputs must use the
same resolution and standard. The only supported pixel format is now
YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but
this is currently unsupported.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
To: linux-media@vger.kernel.org
---
 drivers/media/i2c/Kconfig    |    6 +
 drivers/media/i2c/Makefile   |    1 +
 drivers/media/i2c/isl7998x.c | 1111 ++++++++++++++++++++++++++++++++++
 3 files changed, 1118 insertions(+)
 create mode 100644 drivers/media/i2c/isl7998x.c

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 7793358ab8b3..af2ea08d6c59 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -929,6 +929,12 @@ config VIDEO_NOON010PC30
 	help
 	  This driver supports NOON010PC30 CIF camera from Siliconfile
 
+config VIDEO_ISL7998X
+	tristate "Intersil ISL7998x support"
+	depends on I2C && VIDEO_V4L2
+	help
+	  This driver supports Intersil ISL7998x BT656-to-MIPI-CSI2 bridge.
+
 source "drivers/media/i2c/m5mols/Kconfig"
 
 config VIDEO_RJ54N1
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index d8ad9dad495d..a66f105a7bcc 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -113,6 +113,7 @@ obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
+obj-$(CONFIG_VIDEO_ISL7998X)	+= isl7998x.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
 
 obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/isl7998x.c b/drivers/media/i2c/isl7998x.c
new file mode 100644
index 000000000000..858e98d8b494
--- /dev/null
+++ b/drivers/media/i2c/isl7998x.c
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intersil ISL7998x BT656-to-MIPI-CSI2 driver
+ *
+ * Copyright (C) 2018-2019 Marek Vasut <marex@denx.de>
+ */
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+
+#define ISL7998x_WIDTH			720
+#define ISL7998x_HEIGHT			480
+#define ISL7998x_INPUTS			4
+
+#define V4L2_CID_TEST_PATTERN_COLOR	(V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_TEST_PATTERN_CHANNELS	(V4L2_CID_USER_BASE | 0x1002)
+#define V4L2_CID_TEST_PATTERN_BARS	(V4L2_CID_USER_BASE | 0x1003)
+
+#define ISL7998x_REG(page, reg)		(((page) << 8) | (reg))
+
+#define ISL7998x_REG_Pn_SIZE			256
+#define ISL7998x_REG_Pn_BASE(n)			((n) * ISL7998x_REG_Pn_SIZE)
+
+#define ISL7998x_REG_Px_DEC_PAGE(page)		ISL7998x_REG((page), 0xff)
+#define ISL7998x_REG_Px_DEC_PAGE_MASK		0xf
+#define ISL7998x_REG_P0_PRODUCT_ID_CODE		ISL7998x_REG(0, 0x00)
+#define ISL7998x_REG_P0_PRODUCT_REV_CODE	ISL7998x_REG(0, 0x01)
+#define ISL7998x_REG_P0_SW_RESET_CTL		ISL7998x_REG(0, 0x02)
+#define ISL7998x_REG_P0_IO_BUFFER_CTL		ISL7998x_REG(0, 0x03)
+#define ISL7998x_REG_P0_IO_BUFFER_CTL_1_1	ISL7998x_REG(0, 0x04)
+#define ISL7998x_REG_P0_IO_PAD_PULL_EN_CTL	ISL7998x_REG(0, 0x05)
+#define ISL7998x_REG_P0_IO_BUFFER_CTL_1_2	ISL7998x_REG(0, 0x06)
+#define ISL7998x_REG_P0_VIDEO_IN_CHAN_CTL	ISL7998x_REG(0, 0x07)
+#define ISL7998x_REG_P0_CLK_CTL_1		ISL7998x_REG(0, 0x08)
+#define ISL7998x_REG_P0_CLK_CTL_2		ISL7998x_REG(0, 0x09)
+#define ISL7998x_REG_P0_CLK_CTL_3		ISL7998x_REG(0, 0x0a)
+#define ISL7998x_REG_P0_CLK_CTL_4		ISL7998x_REG(0, 0x0b)
+#define ISL7998x_REG_P0_MPP1_SYNC_CTL		ISL7998x_REG(0, 0x0c)
+#define ISL7998x_REG_P0_MPP2_SYNC_CTL		ISL7998x_REG(0, 0x0d)
+#define ISL7998x_REG_P0_IRQ_SYNC_CTL		ISL7998x_REG(0, 0x0e)
+#define ISL7998x_REG_P0_INTERRUPT_STATUS	ISL7998x_REG(0, 0x10)
+#define ISL7998x_REG_P0_CHAN_1_IRQ		ISL7998x_REG(0, 0x11)
+#define ISL7998x_REG_P0_CHAN_2_IRQ		ISL7998x_REG(0, 0x12)
+#define ISL7998x_REG_P0_CHAN_3_IRQ		ISL7998x_REG(0, 0x13)
+#define ISL7998x_REG_P0_CHAN_4_IRQ		ISL7998x_REG(0, 0x14)
+#define ISL7998x_REG_P0_SHORT_DIAG_IRQ		ISL7998x_REG(0, 0x15)
+#define ISL7998x_REG_P0_CHAN_1_IRQ_EN		ISL7998x_REG(0, 0x16)
+#define ISL7998x_REG_P0_CHAN_2_IRQ_EN		ISL7998x_REG(0, 0x17)
+#define ISL7998x_REG_P0_CHAN_3_IRQ_EN		ISL7998x_REG(0, 0x18)
+#define ISL7998x_REG_P0_CHAN_4_IRQ_EN		ISL7998x_REG(0, 0x19)
+#define ISL7998x_REG_P0_SHORT_DIAG_IRQ_EN	ISL7998x_REG(0, 0x1a)
+#define ISL7998x_REG_P0_CHAN_1_STATUS		ISL7998x_REG(0, 0x1b)
+#define ISL7998x_REG_P0_CHAN_2_STATUS		ISL7998x_REG(0, 0x1c)
+#define ISL7998x_REG_P0_CHAN_3_STATUS		ISL7998x_REG(0, 0x1d)
+#define ISL7998x_REG_P0_CHAN_4_STATUS		ISL7998x_REG(0, 0x1e)
+#define ISL7998x_REG_P0_SHORT_DIAG_STATUS	ISL7998x_REG(0, 0x1f)
+#define ISL7998x_REG_P0_CLOCK_DELAY		ISL7998x_REG(0, 0x20)
+
+#define ISL7998x_REG_Px_DEC_INPUT_FMT(pg)	ISL7998x_REG((pg), 0x02)
+#define ISL7998x_REG_Px_DEC_STATUS_1(pg)	ISL7998x_REG((pg), 0x03)
+#define ISL7998x_REG_Px_DEC_HS_DELAY_CTL(pg)	ISL7998x_REG((pg), 0x04)
+#define ISL7998x_REG_Px_DEC_ANCTL(pg)		ISL7998x_REG((pg), 0x06)
+#define ISL7998x_REG_Px_DEC_CROP_HI(pg)		ISL7998x_REG((pg), 0x07)
+#define ISL7998x_REG_Px_DEC_VDELAY_LO(pg)	ISL7998x_REG((pg), 0x08)
+#define ISL7998x_REG_Px_DEC_VACTIVE_LO(pg)	ISL7998x_REG((pg), 0x09)
+#define ISL7998x_REG_Px_DEC_HDELAY_LO(pg)	ISL7998x_REG((pg), 0x0a)
+#define ISL7998x_REG_Px_DEC_HACTIVE_LO(pg)	ISL7998x_REG((pg), 0x0b)
+#define ISL7998x_REG_Px_DEC_CNTRL1(pg)		ISL7998x_REG((pg), 0x0c)
+#define ISL7998x_REG_Px_DEC_CSC_CTL(pg)		ISL7998x_REG((pg), 0x0d)
+#define ISL7998x_REG_Px_DEC_BRIGHT(pg)		ISL7998x_REG((pg), 0x10)
+#define ISL7998x_REG_Px_DEC_CONTRAST(pg)	ISL7998x_REG((pg), 0x11)
+#define ISL7998x_REG_Px_DEC_SHARPNESS(pg)	ISL7998x_REG((pg), 0x12)
+#define ISL7998x_REG_Px_DEC_SAT_U(pg)		ISL7998x_REG((pg), 0x13)
+#define ISL7998x_REG_Px_DEC_SAT_V(pg)		ISL7998x_REG((pg), 0x14)
+#define ISL7998x_REG_Px_DEC_HUE(pg)		ISL7998x_REG((pg), 0x15)
+#define ISL7998x_REG_Px_DEC_VERT_PEAK(pg)	ISL7998x_REG((pg), 0x17)
+#define ISL7998x_REG_Px_DEC_CORING(pg)		ISL7998x_REG((pg), 0x18)
+#define ISL7998x_REG_Px_DEC_SDT(pg)		ISL7998x_REG((pg), 0x1c)
+#define ISL7998x_REG_Px_DEC_SDT_DET		BIT(7)
+#define ISL7998x_REG_Px_DEC_SDTR(pg)		ISL7998x_REG((pg), 0x1d)
+#define ISL7998x_REG_Px_DEC_CLMPG(pg)		ISL7998x_REG((pg), 0x20)
+#define ISL7998x_REG_Px_DEC_IAGC(pg)		ISL7998x_REG((pg), 0x21)
+#define ISL7998x_REG_Px_DEC_AGCGAIN(pg)		ISL7998x_REG((pg), 0x22)
+#define ISL7998x_REG_Px_DEC_PEAKWT(pg)		ISL7998x_REG((pg), 0x23)
+#define ISL7998x_REG_Px_DEC_CLMPL(pg)		ISL7998x_REG((pg), 0x24)
+#define ISL7998x_REG_Px_DEC_SYNCT(pg)		ISL7998x_REG((pg), 0x25)
+#define ISL7998x_REG_Px_DEC_MISSCNT(pg)		ISL7998x_REG((pg), 0x26)
+#define ISL7998x_REG_Px_DEC_PCLAMP(pg)		ISL7998x_REG((pg), 0x27)
+#define ISL7998x_REG_Px_DEC_VERT_CTL_1(pg)	ISL7998x_REG((pg), 0x28)
+#define ISL7998x_REG_Px_DEC_VERT_CTL_2(pg)	ISL7998x_REG((pg), 0x29)
+#define ISL7998x_REG_Px_DEC_CLR_KILL_LVL(pg)	ISL7998x_REG((pg), 0x2a)
+#define ISL7998x_REG_Px_DEC_COMB_FILTER_CTL(pg)	ISL7998x_REG((pg), 0x2b)
+#define ISL7998x_REG_Px_DEC_LUMA_DELAY(pg)	ISL7998x_REG((pg), 0x2c)
+#define ISL7998x_REG_Px_DEC_MISC1(pg)		ISL7998x_REG((pg), 0x2d)
+#define ISL7998x_REG_Px_DEC_MISC2(pg)		ISL7998x_REG((pg), 0x2e)
+#define ISL7998x_REG_Px_DEC_MISC3(pg)		ISL7998x_REG((pg), 0x2f)
+#define ISL7998x_REG_Px_DEC_MVSN(pg)		ISL7998x_REG((pg), 0x30)
+#define ISL7998x_REG_Px_DEC_CSTATUS2(pg)	ISL7998x_REG((pg), 0x31)
+#define ISL7998x_REG_Px_DEC_HFREF(pg)		ISL7998x_REG((pg), 0x32)
+#define ISL7998x_REG_Px_DEC_CLMD(pg)		ISL7998x_REG((pg), 0x33)
+#define ISL7998x_REG_Px_DEC_ID_DET_CTL(pg)	ISL7998x_REG((pg), 0x34)
+#define ISL7998x_REG_Px_DEC_CLCNTL(pg)		ISL7998x_REG((pg), 0x35)
+#define ISL7998x_REG_Px_DEC_DIFF_CLMP_CTL_1(pg)	ISL7998x_REG((pg), 0x36)
+#define ISL7998x_REG_Px_DEC_DIFF_CLMP_CTL_2(pg)	ISL7998x_REG((pg), 0x37)
+#define ISL7998x_REG_Px_DEC_DIFF_CLMP_CTL_3(pg)	ISL7998x_REG((pg), 0x38)
+#define ISL7998x_REG_Px_DEC_DIFF_CLMP_CTL_4(pg)	ISL7998x_REG((pg), 0x39)
+#define ISL7998x_REG_Px_DEC_SHORT_DET_CTL(pg)	ISL7998x_REG((pg), 0x3a)
+#define ISL7998x_REG_Px_DEC_SHORT_DET_CTL_1(pg)	ISL7998x_REG((pg), 0x3b)
+#define ISL7998x_REG_Px_DEC_AFE_TST_MUX_CTL(pg)	ISL7998x_REG((pg), 0x3c)
+#define ISL7998x_REG_Px_DEC_DATA_CONV(pg)	ISL7998x_REG((pg), 0x3d)
+#define ISL7998x_REG_Px_DEC_INTERNAL_TEST(pg)	ISL7998x_REG((pg), 0x3f)
+#define ISL7998x_REG_Px_DEC_H_DELAY_CTL(pg)	ISL7998x_REG((pg), 0x43)
+#define ISL7998x_REG_Px_DEC_H_DELAY_II_HI(pg)	ISL7998x_REG((pg), 0x44)
+#define ISL7998x_REG_Px_DEC_H_DELAY_II_LOW(pg)	ISL7998x_REG((pg), 0x45)
+
+#define ISL7998x_REG_Px_ACA_CTL_1(pg)		ISL7998x_REG((pg), 0x80)
+#define ISL7998x_REG_Px_ACA_GAIN_CTL(pg)	ISL7998x_REG((pg), 0x81)
+#define ISL7998x_REG_Px_ACA_Y_AVG_HI_LIMIT(pg)	ISL7998x_REG((pg), 0x82)
+#define ISL7998x_REG_Px_ACA_Y_AVG_LO_LIMIT(pg)	ISL7998x_REG((pg), 0x83)
+#define ISL7998x_REG_Px_ACA_Y_DET_THRESHOLD(pg)	ISL7998x_REG((pg), 0x84)
+#define ISL7998x_REG_Px_ACA_BLACK_LVL(pg)	ISL7998x_REG((pg), 0x85)
+#define ISL7998x_REG_Px_ACA_CENTER_LVL(pg)	ISL7998x_REG((pg), 0x86)
+#define ISL7998x_REG_Px_ACA_WHITE_LVL(pg)	ISL7998x_REG((pg), 0x87)
+#define ISL7998x_REG_Px_ACA_MEAN_OFF_LIMIT(pg)	ISL7998x_REG((pg), 0x88)
+#define ISL7998x_REG_Px_ACA_MEAN_OFF_UPGAIN(pg)	ISL7998x_REG((pg), 0x89)
+#define ISL7998x_REG_Px_ACA_MEAN_OFF_SLOPE(pg)	ISL7998x_REG((pg), 0x8a)
+#define ISL7998x_REG_Px_ACA_MEAN_OFF_DNGAIN(pg)	ISL7998x_REG((pg), 0x8b)
+#define ISL7998x_REG_Px_ACA_DELTA_CO_THRES(pg)	ISL7998x_REG((pg), 0x8c)
+#define ISL7998x_REG_Px_ACA_DELTA_SLOPE(pg)	ISL7998x_REG((pg), 0x8d)
+#define ISL7998x_REG_Px_ACA_LO_HI_AVG_THRES(pg)	ISL7998x_REG((pg), 0x8e)
+#define ISL7998x_REG_Px_ACA_LO_MAX_LVL_CTL(pg)	ISL7998x_REG((pg), 0x8f)
+#define ISL7998x_REG_Px_ACA_HI_MAX_LVL_CTL(pg)	ISL7998x_REG((pg), 0x90)
+#define ISL7998x_REG_Px_ACA_LO_UPGAIN_CTL(pg)	ISL7998x_REG((pg), 0x91)
+#define ISL7998x_REG_Px_ACA_LO_DNGAIN_CTL(pg)	ISL7998x_REG((pg), 0x92)
+#define ISL7998x_REG_Px_ACA_HI_UPGAIN_CTL(pg)	ISL7998x_REG((pg), 0x93)
+#define ISL7998x_REG_Px_ACA_HI_DNGAIN_CTL(pg)	ISL7998x_REG((pg), 0x94)
+#define ISL7998x_REG_Px_ACA_LOPASS_FLT_COEF(pg)	ISL7998x_REG((pg), 0x95)
+#define ISL7998x_REG_Px_ACA_PDF_INDEX(pg)	ISL7998x_REG((pg), 0x96)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_H_STT(pg)	ISL7998x_REG((pg), 0x97)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_H_SZ1(pg)	ISL7998x_REG((pg), 0x98)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_H_SZ2(pg)	ISL7998x_REG((pg), 0x99)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_V_STT(pg)	ISL7998x_REG((pg), 0x9a)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_V_SZ1(pg)	ISL7998x_REG((pg), 0x9b)
+#define ISL7998x_REG_Px_ACA_HIST_WIN_V_SZ2(pg)	ISL7998x_REG((pg), 0x9c)
+#define ISL7998x_REG_Px_ACA_Y_AVG(pg)		ISL7998x_REG((pg), 0xa0)
+#define ISL7998x_REG_Px_ACA_Y_AVG_LIM(pg)	ISL7998x_REG((pg), 0xa1)
+#define ISL7998x_REG_Px_ACA_LO_AVG(pg)		ISL7998x_REG((pg), 0xa2)
+#define ISL7998x_REG_Px_ACA_HI_AVG(pg)		ISL7998x_REG((pg), 0xa3)
+#define ISL7998x_REG_Px_ACA_Y_MAX(pg)		ISL7998x_REG((pg), 0xa4)
+#define ISL7998x_REG_Px_ACA_Y_MIN(pg)		ISL7998x_REG((pg), 0xa5)
+#define ISL7998x_REG_Px_ACA_MOFFSET(pg)		ISL7998x_REG((pg), 0xa6)
+#define ISL7998x_REG_Px_ACA_LO_GAIN(pg)		ISL7998x_REG((pg), 0xa7)
+#define ISL7998x_REG_Px_ACA_HI_GAIN(pg)		ISL7998x_REG((pg), 0xa8)
+#define ISL7998x_REG_Px_ACA_LL_SLOPE(pg)	ISL7998x_REG((pg), 0xa9)
+#define ISL7998x_REG_Px_ACA_LH_SLOPE(pg)	ISL7998x_REG((pg), 0xaa)
+#define ISL7998x_REG_Px_ACA_HL_SLOPE(pg)	ISL7998x_REG((pg), 0xab)
+#define ISL7998x_REG_Px_ACA_HH_SLOPE(pg)	ISL7998x_REG((pg), 0xac)
+#define ISL7998x_REG_Px_ACA_X_LOW(pg)		ISL7998x_REG((pg), 0xad)
+#define ISL7998x_REG_Px_ACA_X_MEAN(pg)		ISL7998x_REG((pg), 0xae)
+#define ISL7998x_REG_Px_ACA_X_HIGH(pg)		ISL7998x_REG((pg), 0xaf)
+#define ISL7998x_REG_Px_ACA_Y_LOW(pg)		ISL7998x_REG((pg), 0xb0)
+#define ISL7998x_REG_Px_ACA_Y_MEAN(pg)		ISL7998x_REG((pg), 0xb1)
+#define ISL7998x_REG_Px_ACA_Y_HIGH(pg)		ISL7998x_REG((pg), 0xb2)
+#define ISL7998x_REG_Px_ACA_CTL_2(pg)		ISL7998x_REG((pg), 0xb3)
+#define ISL7998x_REG_Px_ACA_CTL_3(pg)		ISL7998x_REG((pg), 0xb4)
+#define ISL7998x_REG_Px_ACA_CTL_4(pg)		ISL7998x_REG((pg), 0xb5)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_HIST(pg)	ISL7998x_REG((pg), 0xc0)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TL_H(pg)	ISL7998x_REG((pg), 0xc1)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TL_L(pg)	ISL7998x_REG((pg), 0xc2)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TL_H(pg)	ISL7998x_REG((pg), 0xc3)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TL_L(pg)	ISL7998x_REG((pg), 0xc4)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TR_H(pg)	ISL7998x_REG((pg), 0xc5)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TR_L(pg)	ISL7998x_REG((pg), 0xc6)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TR_H(pg)	ISL7998x_REG((pg), 0xc7)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TR_L(pg)	ISL7998x_REG((pg), 0xc8)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BL_H(pg)	ISL7998x_REG((pg), 0xc9)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BL_L(pg)	ISL7998x_REG((pg), 0xca)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BL_H(pg)	ISL7998x_REG((pg), 0xcb)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BL_L(pg)	ISL7998x_REG((pg), 0xcc)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BR_H(pg)	ISL7998x_REG((pg), 0xcd)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BR_L(pg)	ISL7998x_REG((pg), 0xce)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BR_H(pg)	ISL7998x_REG((pg), 0xcf)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BR_L(pg)	ISL7998x_REG((pg), 0xd0)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_LM_H(pg)	ISL7998x_REG((pg), 0xd1)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_LM_L(pg)	ISL7998x_REG((pg), 0xd2)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_LM_H(pg)	ISL7998x_REG((pg), 0xd3)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_LM_L(pg)	ISL7998x_REG((pg), 0xd4)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TM_H(pg)	ISL7998x_REG((pg), 0xd5)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_TM_L(pg)	ISL7998x_REG((pg), 0xd6)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TM_H(pg)	ISL7998x_REG((pg), 0xd7)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_TM_L(pg)	ISL7998x_REG((pg), 0xd8)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BM_H(pg)	ISL7998x_REG((pg), 0xd9)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_BM_L(pg)	ISL7998x_REG((pg), 0xda)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BM_H(pg)	ISL7998x_REG((pg), 0xdb)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_BM_L(pg)	ISL7998x_REG((pg), 0xdc)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_RM_H(pg)	ISL7998x_REG((pg), 0xdd)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_X_RM_L(pg)	ISL7998x_REG((pg), 0xde)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_RM_H(pg)	ISL7998x_REG((pg), 0xdf)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_RM_L(pg)	ISL7998x_REG((pg), 0xe0)
+#define ISL7998x_REG_Px_ACA_HIST_DATA_LO(pg)	ISL7998x_REG((pg), 0xe1)
+#define ISL7998x_REG_Px_ACA_HIST_DATA_MID(pg)	ISL7998x_REG((pg), 0xe2)
+#define ISL7998x_REG_Px_ACA_HIST_DATA_HI(pg)	ISL7998x_REG((pg), 0xe3)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_Y_CLR(pg)	ISL7998x_REG((pg), 0xe4)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_CB_CLR(pg)	ISL7998x_REG((pg), 0xe5)
+#define ISL7998x_REG_Px_ACA_FLEX_WIN_CR_CLR(pg)	ISL7998x_REG((pg), 0xe6)
+#define ISL7998x_REG_Px_ACA_XFER_HIST_HOST(pg)	ISL7998x_REG((pg), 0xe7)
+
+#define ISL7998x_REG_P5_LI_ENGINE_CTL		ISL7998x_REG(5, 0x00)
+#define ISL7998x_REG_P5_LI_ENGINE_LINE_CTL	ISL7998x_REG(5, 0x01)
+#define ISL7998x_REG_P5_LI_ENGINE_PIC_WIDTH	ISL7998x_REG(5, 0x02)
+#define ISL7998x_REG_P5_LI_ENGINE_SYNC_CTL	ISL7998x_REG(5, 0x03)
+#define ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT	ISL7998x_REG(5, 0x04)
+#define ISL7998x_REG_P5_LI_ENGINE_TYPE_CTL	ISL7998x_REG(5, 0x05)
+#define ISL7998x_REG_P5_LI_ENGINE_FIFO_CTL	ISL7998x_REG(5, 0x06)
+#define ISL7998x_REG_P5_MIPI_READ_START_CTL	ISL7998x_REG(5, 0x07)
+#define ISL7998x_REG_P5_PSEUDO_FRM_FIELD_CTL	ISL7998x_REG(5, 0x08)
+#define ISL7998x_REG_P5_ONE_FIELD_MODE_CTL	ISL7998x_REG(5, 0x09)
+#define ISL7998x_REG_P5_MIPI_INT_HW_TST_CTR	ISL7998x_REG(5, 0x0a)
+#define ISL7998x_REG_P5_TP_GEN_BAR_PATTERN	ISL7998x_REG(5, 0x0b)
+#define ISL7998x_REG_P5_MIPI_PCNT_PSFRM		ISL7998x_REG(5, 0x0c)
+#define ISL7998x_REG_P5_LI_ENGINE_TP_GEN_CTL	ISL7998x_REG(5, 0x0d)
+#define ISL7998x_REG_P5_MIPI_VBLANK_PSFRM	ISL7998x_REG(5, 0x0e)
+#define ISL7998x_REG_P5_LI_ENGINE_CTL_2		ISL7998x_REG(5, 0x0f)
+#define ISL7998x_REG_P5_MIPI_WCNT_1		ISL7998x_REG(5, 0x10)
+#define ISL7998x_REG_P5_MIPI_WCNT_2		ISL7998x_REG(5, 0x11)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_1	ISL7998x_REG(5, 0x12)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_2	ISL7998x_REG(5, 0x13)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_3	ISL7998x_REG(5, 0x14)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_4	ISL7998x_REG(5, 0x15)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_5	ISL7998x_REG(5, 0x16)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_6	ISL7998x_REG(5, 0x17)
+#define ISL7998x_REG_P5_MIPI_DPHY_PARAMS_1	ISL7998x_REG(5, 0x18)
+#define ISL7998x_REG_P5_MIPI_DPHY_SOT_PERIOD	ISL7998x_REG(5, 0x19)
+#define ISL7998x_REG_P5_MIPI_DPHY_EOT_PERIOD	ISL7998x_REG(5, 0x1a)
+#define ISL7998x_REG_P5_MIPI_DPHY_PARAMS_2	ISL7998x_REG(5, 0x1b)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_7	ISL7998x_REG(5, 0x1c)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_8	ISL7998x_REG(5, 0x1d)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_9	ISL7998x_REG(5, 0x1e)
+#define ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_10	ISL7998x_REG(5, 0x1f)
+#define ISL7998x_REG_P5_TP_GEN_MIPI		ISL7998x_REG(5, 0x20)
+#define ISL7998x_REG_P5_ESC_MODE_TIME_CTL	ISL7998x_REG(5, 0x21)
+#define ISL7998x_REG_P5_AUTO_TEST_ERR_DET	ISL7998x_REG(5, 0x22)
+#define ISL7998x_REG_P5_MIPI_TIMING		ISL7998x_REG(5, 0x23)
+#define ISL7998x_REG_P5_PIC_HEIGHT_HIGH		ISL7998x_REG(5, 0x24)
+#define ISL7998x_REG_P5_PIC_HEIGHT_LOW		ISL7998x_REG(5, 0x25)
+#define ISL7998x_REG_P5_MIPI_SP_HS_TRL_CTL	ISL7998x_REG(5, 0x26)
+#define ISL7998x_REG_P5_FIFO_THRSH_CNT_1	ISL7998x_REG(5, 0x28)
+#define ISL7998x_REG_P5_FIFO_THRSH_CNT_2	ISL7998x_REG(5, 0x29)
+#define ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_1	ISL7998x_REG(5, 0x2a)
+#define ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_2	ISL7998x_REG(5, 0x2b)
+#define ISL7998x_REG_P5_PSF_FIELD_END_CTL_1	ISL7998x_REG(5, 0x2c)
+#define ISL7998x_REG_P5_PSF_FIELD_END_CTL_2	ISL7998x_REG(5, 0x2d)
+#define ISL7998x_REG_P5_PSF_FIELD_END_CTL_3	ISL7998x_REG(5, 0x2e)
+#define ISL7998x_REG_P5_PSF_FIELD_END_CTL_4	ISL7998x_REG(5, 0x2f)
+#define ISL7998x_REG_P5_MIPI_ANA_DATA_CTL_1	ISL7998x_REG(5, 0x30)
+#define ISL7998x_REG_P5_MIPI_ANA_DATA_CTL_2	ISL7998x_REG(5, 0x31)
+#define ISL7998x_REG_P5_MIPI_ANA_CLK_CTL	ISL7998x_REG(5, 0x32)
+#define ISL7998x_REG_P5_PLL_ANA_STATUS		ISL7998x_REG(5, 0x33)
+#define ISL7998x_REG_P5_PLL_ANA_MISC_CTL	ISL7998x_REG(5, 0x34)
+#define ISL7998x_REG_P5_MIPI_ANA		ISL7998x_REG(5, 0x35)
+#define ISL7998x_REG_P5_PLL_ANA			ISL7998x_REG(5, 0x36)
+#define ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_1	ISL7998x_REG(5, 0x38)
+#define ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_2	ISL7998x_REG(5, 0x39)
+#define ISL7998x_REG_P5_H_LINE_CNT_1		ISL7998x_REG(5, 0x3a)
+#define ISL7998x_REG_P5_H_LINE_CNT_2		ISL7998x_REG(5, 0x3b)
+#define ISL7998x_REG_P5_HIST_LINE_CNT_1		ISL7998x_REG(5, 0x3c)
+#define ISL7998x_REG_P5_HIST_LINE_CNT_2		ISL7998x_REG(5, 0x3d)
+
+static const struct reg_sequence isl7998x_init_seq_1[] = {
+	{ ISL7998x_REG_P0_SHORT_DIAG_IRQ_EN, 0xff },
+	{ ISL7998x_REG_Px_DEC_SDT(0x1), 0x07 },
+	{ ISL7998x_REG_Px_DEC_SHORT_DET_CTL_1(0x1), 0x03 },
+	{ ISL7998x_REG_Px_DEC_SDT(0x2), 0x07 },
+	{ ISL7998x_REG_Px_DEC_SHORT_DET_CTL_1(0x2), 0x03 },
+	{ ISL7998x_REG_Px_DEC_SDT(0x3), 0x07 },
+	{ ISL7998x_REG_Px_DEC_SHORT_DET_CTL_1(0x3), 0x03 },
+	{ ISL7998x_REG_Px_DEC_SDT(0x4), 0x07 },
+	{ ISL7998x_REG_Px_DEC_SHORT_DET_CTL_1(0x4), 0x03 },
+	{ ISL7998x_REG_P5_LI_ENGINE_CTL, 0x00 },
+	{ ISL7998x_REG_P0_SW_RESET_CTL, 0x1f, 10 },
+	{ ISL7998x_REG_P0_IO_BUFFER_CTL, 0x00 },
+	{ ISL7998x_REG_P0_MPP2_SYNC_CTL, 0xc9 },
+	{ ISL7998x_REG_P0_IRQ_SYNC_CTL, 0xc9 },
+	{ ISL7998x_REG_P0_CHAN_1_IRQ, 0x03 },
+	{ ISL7998x_REG_P0_CHAN_2_IRQ, 0x00 },
+	{ ISL7998x_REG_P0_CHAN_3_IRQ, 0x00 },
+	{ ISL7998x_REG_P0_CHAN_4_IRQ, 0x00 },
+	{ ISL7998x_REG_P5_LI_ENGINE_CTL, 0x02 },
+	{ ISL7998x_REG_P5_LI_ENGINE_LINE_CTL, 0x85 },
+	{ ISL7998x_REG_P5_LI_ENGINE_PIC_WIDTH, 0xa0 },
+	{ ISL7998x_REG_P5_LI_ENGINE_SYNC_CTL, 0x18 },
+	{ ISL7998x_REG_P5_LI_ENGINE_TYPE_CTL, 0x40 },
+	{ ISL7998x_REG_P5_LI_ENGINE_FIFO_CTL, 0x40 },
+	{ ISL7998x_REG_P5_MIPI_WCNT_1, 0x05 },
+	{ ISL7998x_REG_P5_MIPI_WCNT_2, 0xa0 },
+	{ ISL7998x_REG_P5_TP_GEN_MIPI, 0x00 },
+	{ ISL7998x_REG_P5_ESC_MODE_TIME_CTL, 0x0c },
+	{ ISL7998x_REG_P5_MIPI_SP_HS_TRL_CTL, 0x00 },
+	{ ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_1, 0x00 },
+	{ ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_2, 0x19 },
+	{ ISL7998x_REG_P5_PSF_FIELD_END_CTL_1, 0x18 },
+	{ ISL7998x_REG_P5_PSF_FIELD_END_CTL_2, 0xf1 },
+	{ ISL7998x_REG_P5_PSF_FIELD_END_CTL_3, 0x00 },
+	{ ISL7998x_REG_P5_PSF_FIELD_END_CTL_4, 0xf1 },
+	{ ISL7998x_REG_P5_MIPI_ANA_DATA_CTL_1, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_ANA_DATA_CTL_2, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_ANA_CLK_CTL, 0x00 },
+	{ ISL7998x_REG_P5_PLL_ANA_STATUS, 0xc0 },
+	{ ISL7998x_REG_P5_PLL_ANA_MISC_CTL, 0x18 },
+	{ ISL7998x_REG_P5_PLL_ANA, 0x00 },
+	{ ISL7998x_REG_P0_SW_RESET_CTL, 0x10, 10 },
+	/* Page 0xf means write to all of pages 1,2,3,4 */
+	{ ISL7998x_REG_Px_DEC_VDELAY_LO(0xf), 0x14 },
+	{ ISL7998x_REG_Px_DEC_MISC3(0xf), 0xe6 },
+	{ ISL7998x_REG_Px_DEC_CLMD(0xf), 0x85 },
+	{ ISL7998x_REG_Px_DEC_H_DELAY_II_LOW(0xf), 0x11 },
+	{ ISL7998x_REG_Px_ACA_XFER_HIST_HOST(0xf), 0x00 },
+	{ ISL7998x_REG_P0_CLK_CTL_1, 0x1f },
+	{ ISL7998x_REG_P0_CLK_CTL_2, 0x43 },
+	{ ISL7998x_REG_P0_CLK_CTL_3, 0x4f },
+};
+
+static const struct reg_sequence isl7998x_init_seq_2[] = {
+	{ ISL7998x_REG_P5_LI_ENGINE_SYNC_CTL, 0x10 },
+	{ ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT, 0xe4 },
+	{ ISL7998x_REG_P5_LI_ENGINE_TYPE_CTL, 0x00 },
+	{ ISL7998x_REG_P5_LI_ENGINE_FIFO_CTL, 0x60 },
+	{ ISL7998x_REG_P5_MIPI_READ_START_CTL, 0x2b },
+	{ ISL7998x_REG_P5_PSEUDO_FRM_FIELD_CTL, 0x02 },
+	{ ISL7998x_REG_P5_ONE_FIELD_MODE_CTL, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_INT_HW_TST_CTR, 0x62 },
+	{ ISL7998x_REG_P5_TP_GEN_BAR_PATTERN, 0x02 },
+	{ ISL7998x_REG_P5_MIPI_PCNT_PSFRM, 0x36 },
+	{ ISL7998x_REG_P5_LI_ENGINE_TP_GEN_CTL, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_VBLANK_PSFRM, 0x6c },
+	{ ISL7998x_REG_P5_LI_ENGINE_CTL_2, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_WCNT_1, 0x05 },
+	{ ISL7998x_REG_P5_MIPI_WCNT_2, 0xa0 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_1, 0x77 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_2, 0x17 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_3, 0x08 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_4, 0x38 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_5, 0x14 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_6, 0xf6 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_PARAMS_1, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_SOT_PERIOD, 0x17 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_EOT_PERIOD, 0x0a },
+	{ ISL7998x_REG_P5_MIPI_DPHY_PARAMS_2, 0x71 },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_7, 0x7a },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_8, 0x0f },
+	{ ISL7998x_REG_P5_MIPI_DPHY_TIMING_CTL_9, 0x8c },
+	{ ISL7998x_REG_P5_MIPI_SP_HS_TRL_CTL, 0x08 },
+	{ ISL7998x_REG_P5_FIFO_THRSH_CNT_1, 0x01 },
+	{ ISL7998x_REG_P5_FIFO_THRSH_CNT_2, 0x0e },
+	{ ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_1, 0x00 },
+	{ ISL7998x_REG_P5_TP_GEN_RND_SYNC_CTL_2, 0x00 },
+	{ ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_1, 0x03 },
+	{ ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_2, 0xc0 },
+	{ ISL7998x_REG_P5_H_LINE_CNT_1, 0x06 },
+	{ ISL7998x_REG_P5_H_LINE_CNT_2, 0xb3 },
+	{ ISL7998x_REG_P5_HIST_LINE_CNT_1, 0x00 },
+	{ ISL7998x_REG_P5_HIST_LINE_CNT_2, 0xf1 },
+	{ ISL7998x_REG_P5_LI_ENGINE_FIFO_CTL, 0x00 },
+	{ ISL7998x_REG_P5_MIPI_ANA, 0x00 },
+	/*
+	 * Wait a bit after reset so that the chip can capture a frame
+	 * and update internal line counters.
+	 */
+	{ ISL7998x_REG_P0_SW_RESET_CTL, 0x00, 50 },
+};
+
+struct isl7998x_datafmt {
+	u32			code;
+	enum v4l2_colorspace	colorspace;
+};
+
+static const struct isl7998x_datafmt isl7998x_colour_fmts[] = {
+	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB },
+};
+
+/* Menu items for LINK_FREQ V4L2 control */
+static const s64 link_freq_menu_items[] = {
+	108000000, 216000000, 432000000
+};
+
+/* Menu items for TEST_PATTERN V4L2 control */
+static const char * const isl7998x_test_pattern_menu[] = {
+	"Disabled", "Enabled-PAL (720x576)", "Enabled-NTSC (720x480)"
+};
+
+struct isl7998x {
+	struct v4l2_subdev		subdev;
+	struct regmap			*regmap;
+	struct gpio_desc		*pd_gpio;
+	unsigned int			nr_mipi_lanes;
+	u32				nr_inputs;
+
+	unsigned int			width;
+	unsigned int			height;
+	const struct isl7998x_datafmt	*fmt;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_pad		pad;
+#endif
+
+	struct v4l2_ctrl_handler	ctrl_handler;
+	struct mutex			ctrl_mutex;
+	/* V4L2 Controls */
+	struct v4l2_ctrl		*link_freq;
+	u8				test_pattern_enabled;
+	u8				test_pattern_bars;
+	u8				test_pattern_chans;
+	u8				test_pattern_color;
+};
+
+static struct isl7998x *sd_to_isl7998x(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct isl7998x, subdev);
+}
+
+static struct isl7998x *i2c_to_isl7998x(const struct i2c_client *client)
+{
+	return sd_to_isl7998x(i2c_get_clientdata(client));
+}
+
+static int isl7998x_init(struct isl7998x *isl7998x)
+{
+	const unsigned int lanes = isl7998x->nr_mipi_lanes;
+	const u32 isl7998x_video_in_chan_map[] = { 0x00, 0x11, 0x02, 0x02 };
+	const struct reg_sequence isl7998x_init_seq_custom[] = {
+		{ ISL7998x_REG_P0_VIDEO_IN_CHAN_CTL,
+		  isl7998x_video_in_chan_map[isl7998x->nr_inputs - 1] },
+		{ ISL7998x_REG_P0_CLK_CTL_4, (lanes == 1) ? 0x40 : 0x41 },
+		{ ISL7998x_REG_P5_LI_ENGINE_CTL, (lanes == 1) ? 0x01 : 0x02 },
+		{ ISL7998x_REG_P5_LI_ENGINE_LINE_CTL,
+		  0x20 | ((isl7998x->width >> 7) & 0x1f) },
+		{ ISL7998x_REG_P5_LI_ENGINE_PIC_WIDTH,
+		  (isl7998x->width << 1) & 0xff },
+	};
+	struct regmap *regmap = isl7998x->regmap;
+	int ret;
+
+	ret = regmap_register_patch(regmap, isl7998x_init_seq_1,
+				      ARRAY_SIZE(isl7998x_init_seq_1));
+	if (ret)
+		return ret;
+
+	ret = regmap_register_patch(regmap, isl7998x_init_seq_custom,
+				      ARRAY_SIZE(isl7998x_init_seq_custom));
+	if (ret)
+		return ret;
+
+	return regmap_register_patch(regmap, isl7998x_init_seq_2,
+				      ARRAY_SIZE(isl7998x_init_seq_2));
+}
+
+static int isl7998x_g_mbus_config(struct v4l2_subdev *sd,
+				  struct v4l2_mbus_config *cfg)
+{
+	struct isl7998x *isl7998x = sd_to_isl7998x(sd);
+
+	cfg->type = V4L2_MBUS_CSI2_DPHY;
+	cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+	if (isl7998x->nr_mipi_lanes == 1)
+		cfg->flags |= V4L2_MBUS_CSI2_1_LANE;
+	else
+		cfg->flags |= V4L2_MBUS_CSI2_2_LANE;
+
+	return 0;
+}
+
+static int isl7998x_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isl7998x *isl7998x = sd_to_isl7998x(sd);
+
+	return isl7998x_init(isl7998x);
+}
+
+static int isl7998x_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(isl7998x_colour_fmts))
+		return -EINVAL;
+
+	code->code = isl7998x_colour_fmts[code->index].code;
+	return 0;
+}
+
+static const unsigned int isl7998x_std_res[] = {
+	480, 576, 576, 480, 480, 576, 480, 480
+};
+
+static int isl7998x_update_std(struct isl7998x *isl7998x)
+{
+	unsigned int height[ISL7998x_INPUTS];
+	u8 scanning = GENMASK(ISL7998x_INPUTS - 1, 0);
+	unsigned int i;
+	int ret;
+	u32 reg;
+
+	while (true) {
+		for (i = 0; i < ISL7998x_INPUTS; i++) {
+			ret = regmap_read(isl7998x->regmap,
+					  ISL7998x_REG_Px_DEC_SDT(i + 1), &reg);
+			if (ret)
+				return ret;
+
+			/* Detection is still in progress, restart. */
+			if (reg & ISL7998x_REG_Px_DEC_SDT_DET) {
+				scanning = GENMASK(ISL7998x_INPUTS - 1, 0);
+				break;
+			}
+
+			scanning &= ~BIT(i);
+			height[i] = isl7998x_std_res[(reg >> 4) & 0x7];
+		}
+
+		if (!scanning)
+			break;
+
+		mdelay(1);
+	}
+
+	/*
+	 * According to Renesas FAE, all input cameras must have the
+	 * same standard on this chip.
+	 */
+	for (i = 1; i < isl7998x->nr_inputs ; i++)
+		if (height[i - 1] != height[i])
+			return -EINVAL;
+
+	isl7998x->height = height[0];
+
+	return 0;
+}
+
+static int isl7998x_get_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *format)
+{
+	struct isl7998x *isl7998x = sd_to_isl7998x(sd);
+	struct v4l2_mbus_framefmt *mf = &format->format;
+
+	if (format->pad != 0)
+		return -EINVAL;
+
+	if (isl7998x->test_pattern_enabled == 1) {
+		mf->width	= 720;
+		mf->height	= 576;
+	} else if (isl7998x->test_pattern_enabled == 2) {
+		mf->width	= 720;
+		mf->height	= 480;
+	} else {
+		mf->width	= isl7998x->width;
+		mf->height	= isl7998x->height;
+	}
+
+	mf->code	= isl7998x->fmt->code;
+	mf->field	= V4L2_FIELD_INTERLACED;
+	mf->colorspace	= 0;
+
+	return 0;
+}
+
+static int isl7998x_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct isl7998x *isl7998x = sd_to_isl7998x(sd);
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	int ret;
+
+	if (format->pad != 0)
+		return -EINVAL;
+
+	if (format->format.width != 720 ||
+	    (format->format.height != 480 && format->format.height != 576))
+		return -EINVAL;
+
+	if (format->format.code != MEDIA_BUS_FMT_YUYV8_2X8)
+		return -EINVAL;
+
+	mf->width	= format->format.width;
+	mf->height	= format->format.height;
+	mf->code	= format->format.code;
+	mf->field	= V4L2_FIELD_INTERLACED;
+	mf->colorspace	= 0;
+
+	if (format->which != V4L2_SUBDEV_FORMAT_TRY) {
+		ret = isl7998x_update_std(isl7998x);
+		if (ret)
+			return ret;
+		mf->width = isl7998x->width;
+		mf->height = isl7998x->height;
+		isl7998x->fmt = &isl7998x_colour_fmts[0];
+	}
+
+	return 0;
+}
+
+static int isl7998x_set_test_pattern(struct isl7998x *isl7998x)
+{
+	const struct reg_sequence isl7998x_init_seq_tpg_off[] = {
+		{ ISL7998x_REG_P5_LI_ENGINE_TP_GEN_CTL, 0 },
+		{ ISL7998x_REG_P5_LI_ENGINE_CTL_2, 0 }
+	};
+	const struct reg_sequence isl7998x_init_seq_tpg_on[] = {
+		{ ISL7998x_REG_P5_TP_GEN_BAR_PATTERN,
+		  isl7998x->test_pattern_bars << 6 },
+		{ ISL7998x_REG_P5_LI_ENGINE_CTL_2,
+		  isl7998x->test_pattern_enabled == 1 ? BIT(2) : 0 },
+		{ ISL7998x_REG_P5_LI_ENGINE_TP_GEN_CTL,
+		  (isl7998x->test_pattern_chans << 4) |
+		  (isl7998x->test_pattern_color << 2) }
+	};
+	struct regmap *regmap = isl7998x->regmap;
+
+	if (isl7998x->test_pattern_enabled) {
+		return regmap_register_patch(regmap, isl7998x_init_seq_tpg_on,
+					ARRAY_SIZE(isl7998x_init_seq_tpg_on));
+	} else {
+		return regmap_register_patch(regmap, isl7998x_init_seq_tpg_off,
+					ARRAY_SIZE(isl7998x_init_seq_tpg_off));
+	}
+}
+
+static int isl7998x_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct isl7998x *isl7998x = container_of(ctrl->handler,
+					       struct isl7998x, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_TEST_PATTERN_BARS:
+		isl7998x->test_pattern_bars = ctrl->val & 0x3;
+		return isl7998x_set_test_pattern(isl7998x);
+	case V4L2_CID_TEST_PATTERN_CHANNELS:
+		isl7998x->test_pattern_chans = ctrl->val & 0xf;
+		return isl7998x_set_test_pattern(isl7998x);
+	case V4L2_CID_TEST_PATTERN_COLOR:
+		isl7998x->test_pattern_color = ctrl->val & 0x3;
+		return isl7998x_set_test_pattern(isl7998x);
+	case V4L2_CID_TEST_PATTERN:
+		isl7998x->test_pattern_enabled = !!ctrl->val;
+		return isl7998x_set_test_pattern(isl7998x);
+	}
+
+	return 0;
+}
+
+static int isl7998x_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct isl7998x *isl7998x = container_of(ctrl->handler,
+					       struct isl7998x, ctrl_handler);
+
+	v4l2_info(&isl7998x->subdev, "ctrl(id:0x%x,val:0x%x) is not handled\n",
+		  ctrl->id, ctrl->val);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops isl7998x_subdev_video_ops = {
+	.g_mbus_config	= isl7998x_g_mbus_config,
+	.s_stream	= isl7998x_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops isl7998x_subdev_pad_ops = {
+	.enum_mbus_code = isl7998x_enum_mbus_code,
+	.get_fmt	= isl7998x_get_fmt,
+	.set_fmt	= isl7998x_set_fmt,
+};
+
+static const struct v4l2_subdev_ops isl7998x_subdev_ops = {
+	.video		= &isl7998x_subdev_video_ops,
+	.pad		= &isl7998x_subdev_pad_ops,
+};
+
+static const struct media_entity_operations isl7998x_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_ctrl_ops isl7998x_ctrl_ops = {
+	.s_ctrl			= isl7998x_set_ctrl,
+	.g_volatile_ctrl	= isl7998x_get_ctrl,
+};
+
+static const char * const isl7998x_test_pattern_bars[] = {
+	"bbbbwb", "bbbwwb", "bbwbwb", "bbwwwb"
+};
+
+static const char * const isl7998x_test_pattern_colors[] = {
+	"Yellow", "Blue", "Green", "Pink"
+};
+
+static const struct v4l2_ctrl_config isl7998x_ctrls[] = {
+	{
+		.ops		= &isl7998x_ctrl_ops,
+		.id		= V4L2_CID_TEST_PATTERN_BARS,
+		.type		= V4L2_CTRL_TYPE_MENU,
+		.name		= "Test Pattern Bars",
+		.max		= ARRAY_SIZE(isl7998x_test_pattern_bars) - 1,
+		.def		= 0,
+		.qmenu		= isl7998x_test_pattern_bars,
+	}, {
+		.ops		= &isl7998x_ctrl_ops,
+		.id		= V4L2_CID_TEST_PATTERN_CHANNELS,
+		.type		= V4L2_CTRL_TYPE_INTEGER,
+		.name		= "Test Pattern Channels",
+		.min		= 0,
+		.max		= 0xf,
+		.step		= 1,
+		.def		= 0,
+		.flags		= 0,
+	}, {
+		.ops		= &isl7998x_ctrl_ops,
+		.id		= V4L2_CID_TEST_PATTERN_COLOR,
+		.type		= V4L2_CTRL_TYPE_MENU,
+		.name		= "Test Pattern Color",
+		.max		= ARRAY_SIZE(isl7998x_test_pattern_colors) - 1,
+		.def		= 0,
+		.qmenu		= isl7998x_test_pattern_colors,
+	},
+};
+
+#define ISL7998x_REG_DECODER_ACA_READABLE_RANGE(page)			\
+	/* Decoder range */						\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_INPUT_FMT(page),		\
+			 ISL7998x_REG_Px_DEC_HS_DELAY_CTL(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_ANCTL(page),		\
+			 ISL7998x_REG_Px_DEC_CSC_CTL(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_BRIGHT(page),		\
+			 ISL7998x_REG_Px_DEC_HUE(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_VERT_PEAK(page),		\
+			 ISL7998x_REG_Px_DEC_CORING(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_SDT(page),			\
+			 ISL7998x_REG_Px_DEC_SDTR(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_CLMPG(page),		\
+			 ISL7998x_REG_Px_DEC_DATA_CONV(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_INTERNAL_TEST(page),	\
+			 ISL7998x_REG_Px_DEC_INTERNAL_TEST(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_H_DELAY_CTL(page),		\
+			 ISL7998x_REG_Px_DEC_H_DELAY_II_LOW(page)),	\
+	/* ACA range */							\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_CTL_1(page),		\
+			 ISL7998x_REG_Px_ACA_HIST_WIN_V_SZ2(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_Y_AVG(page),		\
+			 ISL7998x_REG_Px_ACA_CTL_4(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_FLEX_WIN_HIST(page),	\
+			 ISL7998x_REG_Px_ACA_XFER_HIST_HOST(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(page),		\
+			 ISL7998x_REG_Px_DEC_PAGE(page))
+
+#define ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(page)			\
+	/* Decoder range */						\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_INPUT_FMT(page),		\
+			 ISL7998x_REG_Px_DEC_INPUT_FMT(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_HS_DELAY_CTL(page),	\
+			 ISL7998x_REG_Px_DEC_HS_DELAY_CTL(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_ANCTL(page),		\
+			 ISL7998x_REG_Px_DEC_CSC_CTL(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_BRIGHT(page),		\
+			 ISL7998x_REG_Px_DEC_HUE(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_VERT_PEAK(page),		\
+			 ISL7998x_REG_Px_DEC_CORING(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_SDT(page),			\
+			 ISL7998x_REG_Px_DEC_SDTR(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_CLMPG(page),		\
+			 ISL7998x_REG_Px_DEC_MISC3(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_CLMD(page),		\
+			 ISL7998x_REG_Px_DEC_DATA_CONV(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_INTERNAL_TEST(page),	\
+			 ISL7998x_REG_Px_DEC_INTERNAL_TEST(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_H_DELAY_CTL(page),		\
+			 ISL7998x_REG_Px_DEC_H_DELAY_II_LOW(page)),	\
+	/* ACA range */							\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_CTL_1(page),		\
+			 ISL7998x_REG_Px_ACA_HIST_WIN_V_SZ2(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_CTL_2(page),		\
+			 ISL7998x_REG_Px_ACA_CTL_4(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_FLEX_WIN_HIST(page),	\
+			 ISL7998x_REG_Px_ACA_HIST_DATA_LO(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_XFER_HIST_HOST(page),	\
+			 ISL7998x_REG_Px_ACA_XFER_HIST_HOST(page)),	\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(page),		\
+			 ISL7998x_REG_Px_DEC_PAGE(page))
+
+#define ISL7998x_REG_DECODER_ACA_VOLATILE_RANGE(page)			\
+	/* Decoder range */						\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_STATUS_1(page),		\
+			 ISL7998x_REG_Px_DEC_STATUS_1(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_SDT(page),			\
+			 ISL7998x_REG_Px_DEC_SDT(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_DEC_MVSN(page),		\
+			 ISL7998x_REG_Px_DEC_HFREF(page)),		\
+	/* ACA range */							\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_Y_AVG(page),		\
+			 ISL7998x_REG_Px_ACA_Y_HIGH(page)),		\
+	regmap_reg_range(ISL7998x_REG_Px_ACA_HIST_DATA_LO(page),	\
+			 ISL7998x_REG_Px_ACA_FLEX_WIN_CR_CLR(page))
+
+static const struct regmap_range isl7998x_readable_ranges[] = {
+	regmap_reg_range(ISL7998x_REG_P0_PRODUCT_ID_CODE,
+			 ISL7998x_REG_P0_IRQ_SYNC_CTL),
+	regmap_reg_range(ISL7998x_REG_P0_INTERRUPT_STATUS,
+			 ISL7998x_REG_P0_CLOCK_DELAY),
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(0),
+			 ISL7998x_REG_Px_DEC_PAGE(0)),
+
+	ISL7998x_REG_DECODER_ACA_READABLE_RANGE(1),
+	ISL7998x_REG_DECODER_ACA_READABLE_RANGE(2),
+	ISL7998x_REG_DECODER_ACA_READABLE_RANGE(3),
+	ISL7998x_REG_DECODER_ACA_READABLE_RANGE(4),
+
+	regmap_reg_range(ISL7998x_REG_P5_LI_ENGINE_CTL,
+			 ISL7998x_REG_P5_MIPI_SP_HS_TRL_CTL),
+	regmap_reg_range(ISL7998x_REG_P5_FIFO_THRSH_CNT_1,
+			 ISL7998x_REG_P5_PLL_ANA),
+	regmap_reg_range(ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_1,
+			 ISL7998x_REG_P5_HIST_LINE_CNT_2),
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(5),
+			 ISL7998x_REG_Px_DEC_PAGE(5)),
+};
+
+static const struct regmap_range isl7998x_writeable_ranges[] = {
+	regmap_reg_range(ISL7998x_REG_P0_SW_RESET_CTL,
+			 ISL7998x_REG_P0_IRQ_SYNC_CTL),
+	regmap_reg_range(ISL7998x_REG_P0_CHAN_1_IRQ,
+			 ISL7998x_REG_P0_SHORT_DIAG_IRQ_EN),
+	regmap_reg_range(ISL7998x_REG_P0_CLOCK_DELAY,
+			 ISL7998x_REG_P0_CLOCK_DELAY),
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(0),
+			 ISL7998x_REG_Px_DEC_PAGE(0)),
+
+	ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(1),
+	ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(2),
+	ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(3),
+	ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(4),
+
+	regmap_reg_range(ISL7998x_REG_P5_LI_ENGINE_CTL,
+			 ISL7998x_REG_P5_ESC_MODE_TIME_CTL),
+	regmap_reg_range(ISL7998x_REG_P5_MIPI_SP_HS_TRL_CTL,
+			 ISL7998x_REG_P5_PLL_ANA),
+	regmap_reg_range(ISL7998x_REG_P5_TOTAL_PF_LINE_CNT_1,
+			 ISL7998x_REG_P5_HIST_LINE_CNT_2),
+	regmap_reg_range(ISL7998x_REG_Px_DEC_PAGE(5),
+			 ISL7998x_REG_Px_DEC_PAGE(5)),
+
+	ISL7998x_REG_DECODER_ACA_WRITEABLE_RANGE(0xf),
+};
+
+static const struct regmap_range isl7998x_volatile_ranges[] = {
+	regmap_reg_range(ISL7998x_REG_P0_MPP1_SYNC_CTL,
+			 ISL7998x_REG_P0_IRQ_SYNC_CTL),
+	regmap_reg_range(ISL7998x_REG_P0_INTERRUPT_STATUS,
+			 ISL7998x_REG_P0_INTERRUPT_STATUS),
+	regmap_reg_range(ISL7998x_REG_P0_CHAN_1_STATUS,
+			 ISL7998x_REG_P0_SHORT_DIAG_STATUS),
+
+	ISL7998x_REG_DECODER_ACA_VOLATILE_RANGE(1),
+	ISL7998x_REG_DECODER_ACA_VOLATILE_RANGE(2),
+	ISL7998x_REG_DECODER_ACA_VOLATILE_RANGE(3),
+	ISL7998x_REG_DECODER_ACA_VOLATILE_RANGE(4),
+
+	regmap_reg_range(ISL7998x_REG_P5_AUTO_TEST_ERR_DET,
+			 ISL7998x_REG_P5_PIC_HEIGHT_LOW),
+};
+
+static const struct regmap_access_table isl7998x_readable_table = {
+	.yes_ranges = isl7998x_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(isl7998x_readable_ranges),
+};
+
+static const struct regmap_access_table isl7998x_writeable_table = {
+	.yes_ranges = isl7998x_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(isl7998x_writeable_ranges),
+};
+
+static const struct regmap_access_table isl7998x_volatile_table = {
+	.yes_ranges = isl7998x_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(isl7998x_volatile_ranges),
+};
+
+static const struct regmap_range_cfg isl7998x_ranges[] = {
+	{
+		.range_min	= ISL7998x_REG_Pn_BASE(0),
+		.range_max	= ISL7998x_REG_Px_ACA_XFER_HIST_HOST(0xf),
+		.selector_reg	= ISL7998x_REG_Px_DEC_PAGE(0),
+		.selector_mask	= ISL7998x_REG_Px_DEC_PAGE_MASK,
+		.window_start	= 0,
+		.window_len	= 256,
+	}
+};
+
+static const struct regmap_config isl7998x_regmap = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= ISL7998x_REG_Px_ACA_XFER_HIST_HOST(0xf),
+	.ranges		= isl7998x_ranges,
+	.num_ranges	= ARRAY_SIZE(isl7998x_ranges),
+	.rd_table	= &isl7998x_readable_table,
+	.wr_table	= &isl7998x_writeable_table,
+	.volatile_table	= &isl7998x_volatile_table,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int isl7998x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *did)
+{
+	struct device *dev = &client->dev;
+	struct v4l2_fwnode_endpoint endpoint;
+	struct device_node *ep;
+	struct isl7998x *isl7998x;
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	u32 chip_id;
+	int i, ret;
+
+	ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA);
+	if (!ret) {
+		dev_warn(&adapter->dev,
+			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
+		return -EIO;
+	}
+
+	isl7998x = devm_kzalloc(dev, sizeof(*isl7998x), GFP_KERNEL);
+	if (!isl7998x)
+		return -ENOMEM;
+
+	/* Default to all four inputs active unless specified otherwise. */
+	ret = of_property_read_u32(dev->of_node, "isil,num-inputs",
+				   &isl7998x->nr_inputs);
+	if (ret)
+		isl7998x->nr_inputs = 4;
+
+	if (isl7998x->nr_inputs != 1 && isl7998x->nr_inputs != 2 &&
+	    isl7998x->nr_inputs != 4) {
+		dev_err(dev, "Invalid number of inputs selected in DT\n");
+		return -EINVAL;
+	}
+
+	isl7998x->pd_gpio = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(isl7998x->pd_gpio)) {
+		dev_err(dev, "Failed to retrieve/request PD GPIO: %ld\n",
+			PTR_ERR(isl7998x->pd_gpio));
+		return PTR_ERR(isl7998x->pd_gpio);
+	}
+
+	isl7998x->regmap = devm_regmap_init_i2c(client, &isl7998x_regmap);
+	if (IS_ERR(isl7998x->regmap)) {
+		ret = PTR_ERR(isl7998x->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ep = of_graph_get_next_endpoint(dev->of_node, NULL);
+	if (!ep) {
+		dev_err(dev, "Missing endpoint node\n");
+		return -EINVAL;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &endpoint);
+	of_node_put(ep);
+	if (ret) {
+		dev_err(dev, "Failed to parse endpoint\n");
+		return ret;
+	}
+
+	if (endpoint.bus_type != V4L2_MBUS_CSI2_DPHY ||
+	    endpoint.bus.mipi_csi2.num_data_lanes == 0 ||
+	    endpoint.bus.mipi_csi2.num_data_lanes > 2) {
+		dev_err(dev, "Invalid bus type or number of MIPI lanes\n");
+		return -EINVAL;
+	}
+
+	isl7998x->nr_mipi_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
+
+	v4l2_i2c_subdev_init(&isl7998x->subdev, client, &isl7998x_subdev_ops);
+	isl7998x->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	isl7998x->pad.flags = MEDIA_PAD_FL_SOURCE;
+	isl7998x->subdev.entity.ops = &isl7998x_entity_ops;
+	isl7998x->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+	ret = media_entity_pads_init(&isl7998x->subdev.entity, 1,
+				     &isl7998x->pad);
+	if (ret < 0)
+		return ret;
+#endif
+
+	isl7998x->width = ISL7998x_WIDTH;
+	isl7998x->height = ISL7998x_HEIGHT;
+	isl7998x->fmt = &isl7998x_colour_fmts[0];
+
+	ret = v4l2_ctrl_handler_init(&isl7998x->ctrl_handler,
+				     2 + ARRAY_SIZE(isl7998x_ctrls));
+	if (ret)
+		return ret;
+
+	mutex_init(&isl7998x->ctrl_mutex);
+	isl7998x->ctrl_handler.lock = &isl7998x->ctrl_mutex;
+	isl7998x->link_freq = v4l2_ctrl_new_int_menu(&isl7998x->ctrl_handler,
+				&isl7998x_ctrl_ops, V4L2_CID_LINK_FREQ,
+				ARRAY_SIZE(link_freq_menu_items) - 1,
+				endpoint.bus.mipi_csi2.num_data_lanes == 2 ?
+				1 : 0, link_freq_menu_items);
+	isl7998x->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	for (i = 0; i < ARRAY_SIZE(isl7998x_ctrls); i++) {
+		v4l2_ctrl_new_custom(&isl7998x->ctrl_handler,
+				     &isl7998x_ctrls[i], NULL);
+	}
+
+	v4l2_ctrl_new_std_menu_items(&isl7998x->ctrl_handler,
+				&isl7998x_ctrl_ops, V4L2_CID_TEST_PATTERN,
+				ARRAY_SIZE(isl7998x_test_pattern_menu) - 1,
+				0, 0, isl7998x_test_pattern_menu);
+
+	isl7998x->subdev.ctrl_handler = &isl7998x->ctrl_handler;
+
+	isl7998x->subdev.dev = dev;
+	ret = v4l2_async_register_subdev(&isl7998x->subdev);
+	if (ret < 0)
+		goto err_entity_cleanup;
+
+	/*
+	 * Turn the chip ON and keep it ON, otherwise the camera standard
+	 * detection takes about 600 mS every time we do VIDIOC_G_FMT.
+	 */
+	if (isl7998x->pd_gpio)
+		gpiod_set_value(isl7998x->pd_gpio, 0);
+
+	ret = regmap_read(isl7998x->regmap, ISL7998x_REG_P0_PRODUCT_ID_CODE,
+			  &chip_id);
+	if (ret) {
+		dev_err(dev, "Failed to read ID register: %d\n", ret);
+		goto err_init_cleanup;
+	}
+
+	dev_info(dev, "ISL7998x found (id=%x)\n", chip_id);
+
+	ret = isl7998x_init(isl7998x);
+	if (ret)
+		goto err_init_cleanup;
+
+	ret = isl7998x_update_std(isl7998x);
+	if (ret)
+		goto err_init_cleanup;
+
+	return 0;
+
+err_init_cleanup:
+	if (isl7998x->pd_gpio)
+		gpiod_set_value(isl7998x->pd_gpio, 1);
+err_entity_cleanup:
+#ifdef CONFIG_MEDIA_CONTROLLER
+	media_entity_cleanup(&isl7998x->subdev.entity);
+#endif
+	return ret;
+}
+
+static int isl7998x_remove(struct i2c_client *client)
+{
+	struct isl7998x *isl7998x = i2c_to_isl7998x(client);
+
+	if (isl7998x->pd_gpio)
+		gpiod_set_value(isl7998x->pd_gpio, 1);
+	v4l2_async_unregister_subdev(&isl7998x->subdev);
+	v4l2_ctrl_handler_free(isl7998x->subdev.ctrl_handler);
+	media_entity_cleanup(&isl7998x->subdev.entity);
+
+	return 0;
+}
+
+static const struct of_device_id isl7998x_of_match[] = {
+	{ .compatible = "isil,isl79987", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, isl7998x_of_match);
+
+static const struct i2c_device_id isl7998x_id[] = {
+	{ "isl79987", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl7998x_id);
+
+static struct i2c_driver isl7998x_i2c_driver = {
+	.driver = {
+		.name = "isl7998x",
+		.of_match_table = of_match_ptr(isl7998x_of_match),
+	},
+	.probe		= isl7998x_probe,
+	.remove		= isl7998x_remove,
+	.id_table	= isl7998x_id,
+};
+
+module_i2c_driver(isl7998x_i2c_driver);
+
+MODULE_DESCRIPTION("Intersil ISL7998x BT656-to-MIPI-CSI2 driver");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_LICENSE("GPL");
-- 
2.20.1



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-20 20:18 [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Marek Vasut
  2019-05-20 20:18 ` [PATCH 2/2] media: i2c: isl7998x: Add driver for Intersil ISL7998x Marek Vasut
@ 2019-05-28 11:47 ` Jacopo Mondi
  2019-05-28 14:36   ` Marek Vasut
  1 sibling, 1 reply; 12+ messages in thread
From: Jacopo Mondi @ 2019-05-28 11:47 UTC (permalink / raw)
  To: Marek Vasut
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

[-- Attachment #1: Type: text/plain, Size: 2989 bytes --]

Hi Marek,
   thanks for the patch

On Mon, May 20, 2019 at 10:18:11PM +0200, Marek Vasut wrote:
> Add bindings for the Intersil ISL7998x BT656-to-MIPI-CSI2 decoder.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> To: linux-media@vger.kernel.org
> ---
>  .../bindings/media/i2c/isl7998x.txt           | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/isl7998x.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/isl7998x.txt b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
> new file mode 100644
> index 000000000000..c21703983360
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
> @@ -0,0 +1,37 @@
> +Intersil ISL7998x BT656-to-MIPI-CSI2 decoder
> +
> +The Intersil ISL7998x is a BT656-to-MIPI-CSI decoder which, capable of
> +receiving up to four analog stream and multiplexing them into up to four
> +MIPI CSI2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
> +

The documentation is not public, so I can only read what's reported on
the website and the short public datasheet at [1]

From my understanding of the product page, both the ISL79987 and
ILS79988 devices support up to 4 analog inputs, and provide a CSI-2
output and a BT656 output respectively.

What am I reading wrong ?

[1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html

> +Required Properties:
> +- compatible: value should be "isil,isl79987"
> +- pd-gpios: a GPIO spec for the Power Down pin (active high)
> +
> +Option Properties:
> +- isil,num-inputs: Number of connected inputs (1, 2 or 4)

Can't you derive this from the number of connected input endpoints
instead of providing a custom property?

> +
> +For further reading on port node refer to
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +

I think a description of the supported ports and their intended
usages is required here. You have up to 4 inputs and 1 output port,
how do you expect them to be numbered? is port@4 the last input or the
output one?

> +Example:
> +
> +	i2c_master {
> +		isl7998x_mipi@44 {
> +			compatible = "isil,isl79987";
> +			reg = <0x44>;
> +			isil,num-inputs = <4>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_videoadc>;
> +			pd-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> +			status = "okay";
> +
> +			port {
> +				isl79987_to_mipi_csi2: endpoint {
> +					remote-endpoint = <&mipi_csi2_in>;
> +					clock-lanes = <0>;
> +					data-lanes = <1 2>;
> +				};

I see from the example you only support one output port? How do you
model the input ones.

Thanks
   j

> +			};
> +		};
> +	};
> --
> 2.20.1
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-28 11:47 ` [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Jacopo Mondi
@ 2019-05-28 14:36   ` Marek Vasut
  2019-05-28 15:10     ` Jacopo Mondi
  0 siblings, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2019-05-28 14:36 UTC (permalink / raw)
  To: Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

On 5/28/19 1:47 PM, Jacopo Mondi wrote:
> Hi Marek,
>    thanks for the patch

Hi,

> On Mon, May 20, 2019 at 10:18:11PM +0200, Marek Vasut wrote:
>> Add bindings for the Intersil ISL7998x BT656-to-MIPI-CSI2 decoder.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: devicetree@vger.kernel.org
>> To: linux-media@vger.kernel.org
>> ---
>>  .../bindings/media/i2c/isl7998x.txt           | 37 +++++++++++++++++++
>>  1 file changed, 37 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/i2c/isl7998x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/isl7998x.txt b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
>> new file mode 100644
>> index 000000000000..c21703983360
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
>> @@ -0,0 +1,37 @@
>> +Intersil ISL7998x BT656-to-MIPI-CSI2 decoder
>> +
>> +The Intersil ISL7998x is a BT656-to-MIPI-CSI decoder which, capable of
>> +receiving up to four analog stream and multiplexing them into up to four
>> +MIPI CSI2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
>> +
> 
> The documentation is not public, so I can only read what's reported on
> the website and the short public datasheet at [1]

Right

> From my understanding of the product page, both the ISL79987 and
> ILS79988 devices support up to 4 analog inputs, and provide a CSI-2
> output and a BT656 output respectively.
> 
> What am I reading wrong ?

ISL79987 is analog video to mipi csi2 ; I have this chip.
ISL79988 is analog video to bt656 ; I don't have this chip.

> [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
> 
>> +Required Properties:
>> +- compatible: value should be "isil,isl79987"
>> +- pd-gpios: a GPIO spec for the Power Down pin (active high)
>> +
>> +Option Properties:
>> +- isil,num-inputs: Number of connected inputs (1, 2 or 4)
> 
> Can't you derive this from the number of connected input endpoints
> instead of providing a custom property?

Input endpoints from where ?

>> +
>> +For further reading on port node refer to
>> +Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
> 
> I think a description of the supported ports and their intended
> usages is required here. You have up to 4 inputs and 1 output port,
> how do you expect them to be numbered? is port@4 the last input or the
> output one?

The only port is the MIPI CSI2 , see the example below.

>> +Example:
>> +
>> +	i2c_master {
>> +		isl7998x_mipi@44 {
>> +			compatible = "isil,isl79987";
>> +			reg = <0x44>;
>> +			isil,num-inputs = <4>;
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&pinctrl_videoadc>;
>> +			pd-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
>> +			status = "okay";
>> +
>> +			port {
>> +				isl79987_to_mipi_csi2: endpoint {
>> +					remote-endpoint = <&mipi_csi2_in>;
>> +					clock-lanes = <0>;
>> +					data-lanes = <1 2>;
>> +				};
> 
> I see from the example you only support one output port? How do you
> model the input ones.

I don't . Do we model analog inputs now somehow ?

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-28 14:36   ` Marek Vasut
@ 2019-05-28 15:10     ` Jacopo Mondi
  2019-05-28 17:49       ` Marek Vasut
  0 siblings, 1 reply; 12+ messages in thread
From: Jacopo Mondi @ 2019-05-28 15:10 UTC (permalink / raw)
  To: Marek Vasut
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

[-- Attachment #1: Type: text/plain, Size: 4679 bytes --]

Hi Marek,

On Tue, May 28, 2019 at 04:36:27PM +0200, Marek Vasut wrote:
> On 5/28/19 1:47 PM, Jacopo Mondi wrote:
> > Hi Marek,
> >    thanks for the patch
>
> Hi,
>
> > On Mon, May 20, 2019 at 10:18:11PM +0200, Marek Vasut wrote:
> >> Add bindings for the Intersil ISL7998x BT656-to-MIPI-CSI2 decoder.
> >>
> >> Signed-off-by: Marek Vasut <marex@denx.de>
> >> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> >> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> >> Cc: Rob Herring <robh+dt@kernel.org>
> >> Cc: devicetree@vger.kernel.org
> >> To: linux-media@vger.kernel.org
> >> ---
> >>  .../bindings/media/i2c/isl7998x.txt           | 37 +++++++++++++++++++
> >>  1 file changed, 37 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/media/i2c/isl7998x.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/media/i2c/isl7998x.txt b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
> >> new file mode 100644
> >> index 000000000000..c21703983360
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/media/i2c/isl7998x.txt
> >> @@ -0,0 +1,37 @@
> >> +Intersil ISL7998x BT656-to-MIPI-CSI2 decoder
> >> +
> >> +The Intersil ISL7998x is a BT656-to-MIPI-CSI decoder which, capable of
> >> +receiving up to four analog stream and multiplexing them into up to four
> >> +MIPI CSI2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
> >> +
> >
> > The documentation is not public, so I can only read what's reported on
> > the website and the short public datasheet at [1]
>
> Right
>
> > From my understanding of the product page, both the ISL79987 and
> > ILS79988 devices support up to 4 analog inputs, and provide a CSI-2
> > output and a BT656 output respectively.
> >
> > What am I reading wrong ?
>
> ISL79987 is analog video to mipi csi2 ; I have this chip.
> ISL79988 is analog video to bt656 ; I don't have this chip.
>

So please change the description to "Analog to MIPI CSI-2/BT565
decoder"

> > [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
> >
> >> +Required Properties:
> >> +- compatible: value should be "isil,isl79987"

And here you might want to have 2 different compatibles for 79987 and
79988.


> >> +- pd-gpios: a GPIO spec for the Power Down pin (active high)
> >> +
> >> +Option Properties:
> >> +- isil,num-inputs: Number of connected inputs (1, 2 or 4)
> >
> > Can't you derive this from the number of connected input endpoints
> > instead of providing a custom property?
>
> Input endpoints from where ?
>

See below :)

> >> +
> >> +For further reading on port node refer to
> >> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> >> +
> >
> > I think a description of the supported ports and their intended
> > usages is required here. You have up to 4 inputs and 1 output port,
> > how do you expect them to be numbered? is port@4 the last input or the
> > output one?
>
> The only port is the MIPI CSI2 , see the example below.
>
> >> +Example:
> >> +
> >> +	i2c_master {
> >> +		isl7998x_mipi@44 {
> >> +			compatible = "isil,isl79987";
> >> +			reg = <0x44>;
> >> +			isil,num-inputs = <4>;
> >> +			pinctrl-names = "default";
> >> +			pinctrl-0 = <&pinctrl_videoadc>;
> >> +			pd-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> >> +			status = "okay";
> >> +
> >> +			port {
> >> +				isl79987_to_mipi_csi2: endpoint {
> >> +					remote-endpoint = <&mipi_csi2_in>;
> >> +					clock-lanes = <0>;
> >> +					data-lanes = <1 2>;
> >> +				};
> >
> > I see from the example you only support one output port? How do you
> > model the input ones.
>
> I don't . Do we model analog inputs now somehow ?

I really think so, please see:
Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt

And as an example of a board device tree using connectors to model
analog input see how the cvbs input on Salvator-X is described:

	cvbs-in {
		compatible = "composite-video-connector";
		label = "CVBS IN";

		port {
			cvbs_con: endpoint {
				remote-endpoint = <&adv7482_ain7>;
			};
		};
	};

I think you should provide 4 input ports, where to connect input from
the analog connectors, and derive the number of enabled inputs from
the number of endpoints connected to an active remote.

Also, you might want to provide 2 output ports, one CSI-2 and one
BT565 and parse the right one depending on the compatible string.

I would also place the input ports last (from port@2 to port@5) so
that we make easier to support similar chips with more inputs (if
any).

That said, I'm no expert of analog video, so others might have
different opinions :)

Thanks
   j

>
> --
> Best regards,
> Marek Vasut

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-28 15:10     ` Jacopo Mondi
@ 2019-05-28 17:49       ` Marek Vasut
  2019-05-29  6:28         ` Jacopo Mondi
  0 siblings, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2019-05-28 17:49 UTC (permalink / raw)
  To: Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

On 5/28/19 5:10 PM, Jacopo Mondi wrote:
[...]

>>> From my understanding of the product page, both the ISL79987 and
>>> ILS79988 devices support up to 4 analog inputs, and provide a CSI-2
>>> output and a BT656 output respectively.
>>>
>>> What am I reading wrong ?
>>
>> ISL79987 is analog video to mipi csi2 ; I have this chip.
>> ISL79988 is analog video to bt656 ; I don't have this chip.
>>
> 
> So please change the description to "Analog to MIPI CSI-2/BT565
> decoder"

Done

>>> [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
>>>
>>>> +Required Properties:
>>>> +- compatible: value should be "isil,isl79987"
> 
> And here you might want to have 2 different compatibles for 79987 and
> 79988.

The 79988 is not supported yet, do we want to have it in the binding doc?

[...]

>>> I see from the example you only support one output port? How do you
>>> model the input ones.
>>
>> I don't . Do we model analog inputs now somehow ?
> 
> I really think so, please see:
> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> 
> And as an example of a board device tree using connectors to model
> analog input see how the cvbs input on Salvator-X is described:
> 
> 	cvbs-in {
> 		compatible = "composite-video-connector";
> 		label = "CVBS IN";
> 
> 		port {
> 			cvbs_con: endpoint {
> 				remote-endpoint = <&adv7482_ain7>;
> 			};
> 		};
> 	};
> 
> I think you should provide 4 input ports, where to connect input from
> the analog connectors, and derive the number of enabled inputs from
> the number of endpoints connected to an active remote.

Deriving the number of active physical inputs from some existing binding
makes sense.

However unlike the adv7482, the isl79987 does not support remapping the
physical inputs to ADCs in the chip. It does support some remapping of
physical inputs to MIPI CSI2 channels, but that's probably not very useful.

> Also, you might want to provide 2 output ports, one CSI-2 and one
> BT565 and parse the right one depending on the compatible string.

The chip only has one physical output port (either CSI2 or parallel) and
DT should model the hardware, so I would expect there to be one output
port per chip ?

> I would also place the input ports last (from port@2 to port@5) so
> that we make easier to support similar chips with more inputs (if
> any).
> 
> That said, I'm no expert of analog video, so others might have
> different opinions :)
> 
> Thanks
>    j
> 
>>
>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-28 17:49       ` Marek Vasut
@ 2019-05-29  6:28         ` Jacopo Mondi
  2019-05-29 10:41           ` Marek Vasut
  0 siblings, 1 reply; 12+ messages in thread
From: Jacopo Mondi @ 2019-05-29  6:28 UTC (permalink / raw)
  To: Marek Vasut
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

[-- Attachment #1: Type: text/plain, Size: 3600 bytes --]

Hi Marek,

On Tue, May 28, 2019 at 07:49:57PM +0200, Marek Vasut wrote:
> On 5/28/19 5:10 PM, Jacopo Mondi wrote:
> [...]
>
> >>> From my understanding of the product page, both the ISL79987 and
> >>> ILS79988 devices support up to 4 analog inputs, and provide a CSI-2
> >>> output and a BT656 output respectively.
> >>>
> >>> What am I reading wrong ?
> >>
> >> ISL79987 is analog video to mipi csi2 ; I have this chip.
> >> ISL79988 is analog video to bt656 ; I don't have this chip.
> >>
> >
> > So please change the description to "Analog to MIPI CSI-2/BT565
> > decoder"
>
> Done
>

Great!

> >>> [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
> >>>
> >>>> +Required Properties:
> >>>> +- compatible: value should be "isil,isl79987"
> >
> > And here you might want to have 2 different compatibles for 79987 and
> > 79988.
>
> The 79988 is not supported yet, do we want to have it in the binding doc?
>

I got mislead by the isl7998x naming scheme you used...

I would say that's up to you, the two chips seems very similar,
and it might make sense to provide bindings that support both. At the
same time, as long as the here defined bindings does not prevent
future expansions to include the ISL79988, its support could be safely
post-poned. In that case please s/isl7998x/isl79987/ in this document
and do not mention BT565 in the description.

> [...]
>
> >>> I see from the example you only support one output port? How do you
> >>> model the input ones.
> >>
> >> I don't . Do we model analog inputs now somehow ?
> >
> > I really think so, please see:
> > Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> >
> > And as an example of a board device tree using connectors to model
> > analog input see how the cvbs input on Salvator-X is described:
> >
> > 	cvbs-in {
> > 		compatible = "composite-video-connector";
> > 		label = "CVBS IN";
> >
> > 		port {
> > 			cvbs_con: endpoint {
> > 				remote-endpoint = <&adv7482_ain7>;
> > 			};
> > 		};
> > 	};
> >
> > I think you should provide 4 input ports, where to connect input from
> > the analog connectors, and derive the number of enabled inputs from
> > the number of endpoints connected to an active remote.
>
> Deriving the number of active physical inputs from some existing binding
> makes sense.
>
> However unlike the adv7482, the isl79987 does not support remapping the
> physical inputs to ADCs in the chip. It does support some remapping of
> physical inputs to MIPI CSI2 channels, but that's probably not very useful.
>

I understand, but I will now use against you the argument you have
correctly pointed out here below that DT should describe hardware, and
the hardware has indeed 4 input ports..

> > Also, you might want to provide 2 output ports, one CSI-2 and one
> > BT565 and parse the right one depending on the compatible string.
>
> The chip only has one physical output port (either CSI2 or parallel) and
> DT should model the hardware, so I would expect there to be one output
> port per chip ?

You are right indeed, there should be one output port only, whose
content will be different between the two chips... Sorry for the
confusion.

Thanks
  j

>
> > I would also place the input ports last (from port@2 to port@5) so
> > that we make easier to support similar chips with more inputs (if
> > any).
> >
> > That said, I'm no expert of analog video, so others might have
> > different opinions :)
> >
> > Thanks
> >    j
> >
> >>
> >> --
> >> Best regards,
> >> Marek Vasut
>
>
> --
> Best regards,
> Marek Vasut

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-29  6:28         ` Jacopo Mondi
@ 2019-05-29 10:41           ` Marek Vasut
  2019-05-29 11:04             ` Ian Arkver
  0 siblings, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2019-05-29 10:41 UTC (permalink / raw)
  To: Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

On 5/29/19 8:28 AM, Jacopo Mondi wrote:

[...]

>>>>> [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
>>>>>
>>>>>> +Required Properties:
>>>>>> +- compatible: value should be "isil,isl79987"
>>>
>>> And here you might want to have 2 different compatibles for 79987 and
>>> 79988.
>>
>> The 79988 is not supported yet, do we want to have it in the binding doc?
>>
> 
> I got mislead by the isl7998x naming scheme you used...
> 
> I would say that's up to you, the two chips seems very similar,
> and it might make sense to provide bindings that support both. At the
> same time, as long as the here defined bindings does not prevent
> future expansions to include the ISL79988, its support could be safely
> post-poned. In that case please s/isl7998x/isl79987/ in this document
> and do not mention BT565 in the description.

Right

>> [...]
>>
>>>>> I see from the example you only support one output port? How do you
>>>>> model the input ones.
>>>>
>>>> I don't . Do we model analog inputs now somehow ?
>>>
>>> I really think so, please see:
>>> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>>
>>> And as an example of a board device tree using connectors to model
>>> analog input see how the cvbs input on Salvator-X is described:
>>>
>>> 	cvbs-in {
>>> 		compatible = "composite-video-connector";
>>> 		label = "CVBS IN";
>>>
>>> 		port {
>>> 			cvbs_con: endpoint {
>>> 				remote-endpoint = <&adv7482_ain7>;
>>> 			};
>>> 		};
>>> 	};
>>>
>>> I think you should provide 4 input ports, where to connect input from
>>> the analog connectors, and derive the number of enabled inputs from
>>> the number of endpoints connected to an active remote.
>>
>> Deriving the number of active physical inputs from some existing binding
>> makes sense.
>>
>> However unlike the adv7482, the isl79987 does not support remapping the
>> physical inputs to ADCs in the chip. It does support some remapping of
>> physical inputs to MIPI CSI2 channels, but that's probably not very useful.
>>
> 
> I understand, but I will now use against you the argument you have
> correctly pointed out here below that DT should describe hardware, and
> the hardware has indeed 4 input ports..

My question here is whether it makes sense to describe the ports even if
they cannot be muxed to different ADC. Does it ?

[...]

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-29 10:41           ` Marek Vasut
@ 2019-05-29 11:04             ` Ian Arkver
  2019-05-29 11:09               ` Marek Vasut
  0 siblings, 1 reply; 12+ messages in thread
From: Ian Arkver @ 2019-05-29 11:04 UTC (permalink / raw)
  To: Marek Vasut, Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

Hi,

On 29/05/2019 11:41, Marek Vasut wrote:
> On 5/29/19 8:28 AM, Jacopo Mondi wrote:
> 
> [...]
> 
>>>>>> [1] https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
>>>>>>
>>>>>>> +Required Properties:
>>>>>>> +- compatible: value should be "isil,isl79987"
>>>>
>>>> And here you might want to have 2 different compatibles for 79987 and
>>>> 79988.
>>>
>>> The 79988 is not supported yet, do we want to have it in the binding doc?
>>>
>>
>> I got mislead by the isl7998x naming scheme you used...
>>
>> I would say that's up to you, the two chips seems very similar,
>> and it might make sense to provide bindings that support both. At the
>> same time, as long as the here defined bindings does not prevent
>> future expansions to include the ISL79988, its support could be safely
>> post-poned. In that case please s/isl7998x/isl79987/ in this document
>> and do not mention BT565 in the description.
> 
> Right
> 
>>> [...]
>>>
>>>>>> I see from the example you only support one output port? How do you
>>>>>> model the input ones.
>>>>>
>>>>> I don't . Do we model analog inputs now somehow ?
>>>>
>>>> I really think so, please see:
>>>> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>>>
>>>> And as an example of a board device tree using connectors to model
>>>> analog input see how the cvbs input on Salvator-X is described:
>>>>
>>>> 	cvbs-in {
>>>> 		compatible = "composite-video-connector";
>>>> 		label = "CVBS IN";
>>>>
>>>> 		port {
>>>> 			cvbs_con: endpoint {
>>>> 				remote-endpoint = <&adv7482_ain7>;
>>>> 			};
>>>> 		};
>>>> 	};
>>>>
>>>> I think you should provide 4 input ports, where to connect input from
>>>> the analog connectors, and derive the number of enabled inputs from
>>>> the number of endpoints connected to an active remote.
>>>
>>> Deriving the number of active physical inputs from some existing binding
>>> makes sense.
>>>
>>> However unlike the adv7482, the isl79987 does not support remapping the
>>> physical inputs to ADCs in the chip. It does support some remapping of
>>> physical inputs to MIPI CSI2 channels, but that's probably not very useful.
>>>
>>
>> I understand, but I will now use against you the argument you have
>> correctly pointed out here below that DT should describe hardware, and
>> the hardware has indeed 4 input ports..
> 
> My question here is whether it makes sense to describe the ports even if
> they cannot be muxed to different ADC. Does it ?

Each input port can be either differential CVBS or single ended with a 
2:1 input select mux. It would be nice to be able to describe this.

You cannot remap the inputs to different ADCs, but you can remap the 
ADCs to different VC IDs using the 
ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT register. Describing each input 
would proivde somewhere to specify the vc-id.

Regards,
Ian
> 
> [...]
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-29 11:04             ` Ian Arkver
@ 2019-05-29 11:09               ` Marek Vasut
  2019-05-29 11:15                 ` Ian Arkver
  2019-05-29 13:43                 ` Jacopo Mondi
  0 siblings, 2 replies; 12+ messages in thread
From: Marek Vasut @ 2019-05-29 11:09 UTC (permalink / raw)
  To: Ian Arkver, Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

On 5/29/19 1:04 PM, Ian Arkver wrote:
> Hi,
> 
> On 29/05/2019 11:41, Marek Vasut wrote:
>> On 5/29/19 8:28 AM, Jacopo Mondi wrote:
>>
>> [...]
>>
>>>>>>> [1]
>>>>>>> https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
>>>>>>>
>>>>>>>
>>>>>>>> +Required Properties:
>>>>>>>> +- compatible: value should be "isil,isl79987"
>>>>>
>>>>> And here you might want to have 2 different compatibles for 79987 and
>>>>> 79988.
>>>>
>>>> The 79988 is not supported yet, do we want to have it in the binding
>>>> doc?
>>>>
>>>
>>> I got mislead by the isl7998x naming scheme you used...
>>>
>>> I would say that's up to you, the two chips seems very similar,
>>> and it might make sense to provide bindings that support both. At the
>>> same time, as long as the here defined bindings does not prevent
>>> future expansions to include the ISL79988, its support could be safely
>>> post-poned. In that case please s/isl7998x/isl79987/ in this document
>>> and do not mention BT565 in the description.
>>
>> Right
>>
>>>> [...]
>>>>
>>>>>>> I see from the example you only support one output port? How do you
>>>>>>> model the input ones.
>>>>>>
>>>>>> I don't . Do we model analog inputs now somehow ?
>>>>>
>>>>> I really think so, please see:
>>>>> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>>>>
>>>>>
>>>>> And as an example of a board device tree using connectors to model
>>>>> analog input see how the cvbs input on Salvator-X is described:
>>>>>
>>>>>     cvbs-in {
>>>>>         compatible = "composite-video-connector";
>>>>>         label = "CVBS IN";
>>>>>
>>>>>         port {
>>>>>             cvbs_con: endpoint {
>>>>>                 remote-endpoint = <&adv7482_ain7>;
>>>>>             };
>>>>>         };
>>>>>     };
>>>>>
>>>>> I think you should provide 4 input ports, where to connect input from
>>>>> the analog connectors, and derive the number of enabled inputs from
>>>>> the number of endpoints connected to an active remote.
>>>>
>>>> Deriving the number of active physical inputs from some existing
>>>> binding
>>>> makes sense.
>>>>
>>>> However unlike the adv7482, the isl79987 does not support remapping the
>>>> physical inputs to ADCs in the chip. It does support some remapping of
>>>> physical inputs to MIPI CSI2 channels, but that's probably not very
>>>> useful.
>>>>
>>>
>>> I understand, but I will now use against you the argument you have
>>> correctly pointed out here below that DT should describe hardware, and
>>> the hardware has indeed 4 input ports..
>>
>> My question here is whether it makes sense to describe the ports even if
>> they cannot be muxed to different ADC. Does it ?
> 
> Each input port can be either differential CVBS or single ended with a
> 2:1 input select mux. It would be nice to be able to describe this.

Where do you see that ?

> You cannot remap the inputs to different ADCs, but you can remap the
> ADCs to different VC IDs using the
> ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT register. Describing each input
> would proivde somewhere to specify the vc-id.

I think Jacopo mentioned above the input muxing and the MIPI CSI2 VC
muxing are two separate things. But I have to wonder, do we have a way
of muxing the VCs in the DT or via the media controller yet ?

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-29 11:09               ` Marek Vasut
@ 2019-05-29 11:15                 ` Ian Arkver
  2019-05-29 13:43                 ` Jacopo Mondi
  1 sibling, 0 replies; 12+ messages in thread
From: Ian Arkver @ 2019-05-29 11:15 UTC (permalink / raw)
  To: Marek Vasut, Jacopo Mondi
  Cc: linux-media, Sakari Ailus, Mauro Carvalho Chehab, Rob Herring,
	devicetree

Hi Marek,

On 29/05/2019 12:09, Marek Vasut wrote:
> On 5/29/19 1:04 PM, Ian Arkver wrote:
>> Hi,
>>
>> On 29/05/2019 11:41, Marek Vasut wrote:
>>> On 5/29/19 8:28 AM, Jacopo Mondi wrote:
>>>
>>> [...]
>>>
>>>>>>>> [1]
>>>>>>>> https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
>>>>>>>>
>>>>>>>>
>>>>>>>>> +Required Properties:
>>>>>>>>> +- compatible: value should be "isil,isl79987"
>>>>>>
>>>>>> And here you might want to have 2 different compatibles for 79987 and
>>>>>> 79988.
>>>>>
>>>>> The 79988 is not supported yet, do we want to have it in the binding
>>>>> doc?
>>>>>
>>>>
>>>> I got mislead by the isl7998x naming scheme you used...
>>>>
>>>> I would say that's up to you, the two chips seems very similar,
>>>> and it might make sense to provide bindings that support both. At the
>>>> same time, as long as the here defined bindings does not prevent
>>>> future expansions to include the ISL79988, its support could be safely
>>>> post-poned. In that case please s/isl7998x/isl79987/ in this document
>>>> and do not mention BT565 in the description.
>>>
>>> Right
>>>
>>>>> [...]
>>>>>
>>>>>>>> I see from the example you only support one output port? How do you
>>>>>>>> model the input ones.
>>>>>>>
>>>>>>> I don't . Do we model analog inputs now somehow ?
>>>>>>
>>>>>> I really think so, please see:
>>>>>> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>>>>>
>>>>>>
>>>>>> And as an example of a board device tree using connectors to model
>>>>>> analog input see how the cvbs input on Salvator-X is described:
>>>>>>
>>>>>>      cvbs-in {
>>>>>>          compatible = "composite-video-connector";
>>>>>>          label = "CVBS IN";
>>>>>>
>>>>>>          port {
>>>>>>              cvbs_con: endpoint {
>>>>>>                  remote-endpoint = <&adv7482_ain7>;
>>>>>>              };
>>>>>>          };
>>>>>>      };
>>>>>>
>>>>>> I think you should provide 4 input ports, where to connect input from
>>>>>> the analog connectors, and derive the number of enabled inputs from
>>>>>> the number of endpoints connected to an active remote.
>>>>>
>>>>> Deriving the number of active physical inputs from some existing
>>>>> binding
>>>>> makes sense.
>>>>>
>>>>> However unlike the adv7482, the isl79987 does not support remapping the
>>>>> physical inputs to ADCs in the chip. It does support some remapping of
>>>>> physical inputs to MIPI CSI2 channels, but that's probably not very
>>>>> useful.
>>>>>
>>>>
>>>> I understand, but I will now use against you the argument you have
>>>> correctly pointed out here below that DT should describe hardware, and
>>>> the hardware has indeed 4 input ports..
>>>
>>> My question here is whether it makes sense to describe the ports even if
>>> they cannot be muxed to different ADC. Does it ?
>>
>> Each input port can be either differential CVBS or single ended with a
>> 2:1 input select mux. It would be nice to be able to describe this.
> 
> Where do you see that ?

Bits 0 and 1 of each channel page's Differential Clamping Control 4 
(0x39, ISL7998x_REG_Px_DEC_DIFF_CLMP_CTL_4).

I don't think you change it from the default (single ended on the first 
input).

Regards,
Ian

> 
>> You cannot remap the inputs to different ADCs, but you can remap the
>> ADCs to different VC IDs using the
>> ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT register. Describing each input
>> would proivde somewhere to specify the vc-id.
> 
> I think Jacopo mentioned above the input muxing and the MIPI CSI2 VC
> muxing are two separate things. But I have to wonder, do we have a way
> of muxing the VCs in the DT or via the media controller yet ?
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings
  2019-05-29 11:09               ` Marek Vasut
  2019-05-29 11:15                 ` Ian Arkver
@ 2019-05-29 13:43                 ` Jacopo Mondi
  1 sibling, 0 replies; 12+ messages in thread
From: Jacopo Mondi @ 2019-05-29 13:43 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Ian Arkver, linux-media, Sakari Ailus, Mauro Carvalho Chehab,
	Rob Herring, devicetree

[-- Attachment #1: Type: text/plain, Size: 6223 bytes --]

HI Marek,

On Wed, May 29, 2019 at 01:09:47PM +0200, Marek Vasut wrote:
> On 5/29/19 1:04 PM, Ian Arkver wrote:
> > Hi,
> >
> > On 29/05/2019 11:41, Marek Vasut wrote:
> >> On 5/29/19 8:28 AM, Jacopo Mondi wrote:
> >>
> >> [...]
> >>
> >>>>>>> [1]
> >>>>>>> https://www.renesas.com/eu/en/products/audio-video/video-decoders-encoders/video-decoders/device/ISL79987.html
> >>>>>>>
> >>>>>>>
> >>>>>>>> +Required Properties:
> >>>>>>>> +- compatible: value should be "isil,isl79987"
> >>>>>
> >>>>> And here you might want to have 2 different compatibles for 79987 and
> >>>>> 79988.
> >>>>
> >>>> The 79988 is not supported yet, do we want to have it in the binding
> >>>> doc?
> >>>>
> >>>
> >>> I got mislead by the isl7998x naming scheme you used...
> >>>
> >>> I would say that's up to you, the two chips seems very similar,
> >>> and it might make sense to provide bindings that support both. At the
> >>> same time, as long as the here defined bindings does not prevent
> >>> future expansions to include the ISL79988, its support could be safely
> >>> post-poned. In that case please s/isl7998x/isl79987/ in this document
> >>> and do not mention BT565 in the description.
> >>
> >> Right
> >>
> >>>> [...]
> >>>>
> >>>>>>> I see from the example you only support one output port? How do you
> >>>>>>> model the input ones.
> >>>>>>
> >>>>>> I don't . Do we model analog inputs now somehow ?
> >>>>>
> >>>>> I really think so, please see:
> >>>>> Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> >>>>>
> >>>>>
> >>>>> And as an example of a board device tree using connectors to model
> >>>>> analog input see how the cvbs input on Salvator-X is described:
> >>>>>
> >>>>>     cvbs-in {
> >>>>>         compatible = "composite-video-connector";
> >>>>>         label = "CVBS IN";
> >>>>>
> >>>>>         port {
> >>>>>             cvbs_con: endpoint {
> >>>>>                 remote-endpoint = <&adv7482_ain7>;
> >>>>>             };
> >>>>>         };
> >>>>>     };
> >>>>>
> >>>>> I think you should provide 4 input ports, where to connect input from
> >>>>> the analog connectors, and derive the number of enabled inputs from
> >>>>> the number of endpoints connected to an active remote.
> >>>>
> >>>> Deriving the number of active physical inputs from some existing
> >>>> binding
> >>>> makes sense.
> >>>>
> >>>> However unlike the adv7482, the isl79987 does not support remapping the
> >>>> physical inputs to ADCs in the chip. It does support some remapping of
> >>>> physical inputs to MIPI CSI2 channels, but that's probably not very
> >>>> useful.
> >>>>
> >>>
> >>> I understand, but I will now use against you the argument you have
> >>> correctly pointed out here below that DT should describe hardware, and
> >>> the hardware has indeed 4 input ports..
> >>
> >> My question here is whether it makes sense to describe the ports even if
> >> they cannot be muxed to different ADC. Does it ?
> >
> > Each input port can be either differential CVBS or single ended with a
> > 2:1 input select mux. It would be nice to be able to describe this.
>
> Where do you see that ?
>
> > You cannot remap the inputs to different ADCs, but you can remap the
> > ADCs to different VC IDs using the
> > ISL7998x_REG_P5_LI_ENGINE_VC_ASSIGNMENT register. Describing each input
> > would proivde somewhere to specify the vc-id.
>
> I think Jacopo mentioned above the input muxing and the MIPI CSI2 VC
> muxing are two separate things. But I have to wonder, do we have a way
> of muxing the VCs in the DT or via the media controller yet ?

I'm not sure I get what you mean with "input muxing", do you mean
controlling which input is directed to which ADC ? I don't have the
chip manual, but according to what you and Ian said this is not
possible.

Selecting which input video stream is directed to which CSI-2 virtual
channel in the output CSI-2 stream is not possible in mainline. There
are patches in development that would allow you to do so, but their
design is not fully finalized yet. They would, in any case, require
you to have one sink pad for each input port, and while you could
register as many pads as it is specified in your custom property,
you would loose the notion of which input is connected to which port
ie. when a single input (isil,num-inputs=1) is connected to an input
port which is not the first one (anyway, quickly looking at 2/2 it
seems to me you only register a single source pad for this device).

The DT bindings layout is an orthogonal problem though. My opinion is
that as the chip has 4 available input connections it should have 4
input ports in the bindings definition, and for each one you would
register a sink pad. Only the actually connected ones should be present
in the DTS, so that the driver knows which input port is active and,
once something that allows you to control VC will land in mainline,
it will let you tell something like "I want the video stream
received on the input port@2 sent in virtual channel x in the output
CSI-2 stream", but again this is quite an orthogonal issue. Sure thing
is that with the current design and implementation, which afaict does
not provides any sink pad, this is frowned upon (but you can then say
'who cares, since it's not here yet' :)

Or what Ian said, if you can model a connector that provides 2 single
ended inputs, each connected to an input port and muxed internally by
the chip, you could only do that if you have numbered input ports I
guess. Nobody requires you support any of these, but at least bindings
should be defined in a future proof way, to avoid later changes to the
ABI.

Anyway, you had my opinion, multiple times already, and as I'm not in
any position to judge if something is acceptable for merge or not,
I'll now get quiet hoping that this prolonged email exchange drags in
opinion from more experienced people to tell you which direction you
should take and if what you have here is fine already or not :)

Cheers
   j

>
> --
> Best regards,
> Marek Vasut

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-20 20:18 [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Marek Vasut
2019-05-20 20:18 ` [PATCH 2/2] media: i2c: isl7998x: Add driver for Intersil ISL7998x Marek Vasut
2019-05-28 11:47 ` [PATCH 1/2] media: dt-bindings: Add Intersil ISL7998x DT bindings Jacopo Mondi
2019-05-28 14:36   ` Marek Vasut
2019-05-28 15:10     ` Jacopo Mondi
2019-05-28 17:49       ` Marek Vasut
2019-05-29  6:28         ` Jacopo Mondi
2019-05-29 10:41           ` Marek Vasut
2019-05-29 11:04             ` Ian Arkver
2019-05-29 11:09               ` Marek Vasut
2019-05-29 11:15                 ` Ian Arkver
2019-05-29 13:43                 ` Jacopo Mondi

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org linux-media@archiver.kernel.org
	public-inbox-index linux-media


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/ public-inbox