From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>
Subject: [PATCH v4 3/4] rcar-vin: Add support for RGB formats with alpha component
Date: Thu, 4 Jul 2019 19:16:01 +0200 [thread overview]
Message-ID: <20190704171602.29541-4-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20190704171602.29541-1-niklas.soderlund+renesas@ragnatech.se>
The R-Car VIN module supports V4L2_PIX_FMT_ARGB555 and
V4L2_PIX_FMT_ABGR32 pixel formats. Add the hardware register setup and
allow the alpha component to be changed while streaming using the
V4L2_CID_ALPHA_COMPONENT control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
drivers/media/platform/rcar-vin/rcar-dma.c | 35 +++++++++++++++++++++
drivers/media/platform/rcar-vin/rcar-v4l2.c | 8 +++++
2 files changed, 43 insertions(+)
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 4e991cce5fb56a90..620976d173585694 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -111,8 +111,11 @@
#define VNIE_EFE (1 << 1)
/* Video n Data Mode Register bits */
+#define VNDMR_A8BIT(n) ((n & 0xff) << 24)
+#define VNDMR_A8BIT_MASK (0xff << 24)
#define VNDMR_EXRGB (1 << 8)
#define VNDMR_BPSM (1 << 4)
+#define VNDMR_ABIT (1 << 2)
#define VNDMR_DTMD_YCSEP (1 << 1)
#define VNDMR_DTMD_ARGB (1 << 0)
@@ -730,6 +733,12 @@ static int rvin_setup(struct rvin_dev *vin)
/* Note: not supported on M1 */
dmr = VNDMR_EXRGB;
break;
+ case V4L2_PIX_FMT_ARGB555:
+ dmr = (vin->alpha ? VNDMR_ABIT : 0) | VNDMR_DTMD_ARGB;
+ break;
+ case V4L2_PIX_FMT_ABGR32:
+ dmr = VNDMR_A8BIT(vin->alpha) | VNDMR_EXRGB | VNDMR_DTMD_ARGB;
+ break;
default:
vin_err(vin, "Invalid pixelformat (0x%x)\n",
vin->format.pixelformat);
@@ -1346,5 +1355,31 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
void rvin_set_alpha(struct rvin_dev *vin, unsigned int alpha)
{
+ unsigned long flags;
+ u32 dmr;
+
+ spin_lock_irqsave(&vin->qlock, flags);
+
vin->alpha = alpha;
+
+ if (vin->state == STOPPED)
+ goto out;
+
+ switch (vin->format.pixelformat) {
+ case V4L2_PIX_FMT_ARGB555:
+ dmr = rvin_read(vin, VNDMR_REG) & ~VNDMR_ABIT;
+ if (vin->alpha)
+ dmr |= VNDMR_ABIT;
+ break;
+ case V4L2_PIX_FMT_ABGR32:
+ dmr = rvin_read(vin, VNDMR_REG) & ~VNDMR_A8BIT_MASK;
+ dmr |= VNDMR_A8BIT(vin->alpha);
+ break;
+ default:
+ goto out;
+ }
+
+ rvin_write(vin, dmr, VNDMR_REG);
+out:
+ spin_unlock_irqrestore(&vin->qlock, flags);
}
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 0936bcd98df1f75d..f8b6ec4408b2f5fa 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -54,6 +54,14 @@ static const struct rvin_video_format rvin_formats[] = {
.fourcc = V4L2_PIX_FMT_XBGR32,
.bpp = 4,
},
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB555,
+ .bpp = 2,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ABGR32,
+ .bpp = 4,
+ },
};
const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat)
--
2.21.0
next prev parent reply other threads:[~2019-07-04 17:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-04 17:15 [PATCH v4 0/4] rcar-vin: Add support for RGB formats with alpha component Niklas Söderlund
2019-07-04 17:15 ` [PATCH v4 1/4] rcar-vin: Rename VNDMR_DTMD_ARGB1555 to VNDMR_DTMD_ARGB Niklas Söderlund
2019-07-04 17:16 ` [PATCH v4 2/4] rcar-vin: Add control for alpha component Niklas Söderlund
2019-07-04 17:16 ` Niklas Söderlund [this message]
2019-07-04 17:16 ` [PATCH v4 4/4] rcar-vin: Always setup controls when opening video device Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190704171602.29541-4-niklas.soderlund+renesas@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).