From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: linux-media@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Subject: [PATCH 2/4] via-camera: use struct v4l2_fh
Date: Wed, 17 Jul 2019 11:03:43 +0200 [thread overview]
Message-ID: <20190717090345.26521-3-hverkuil-cisco@xs4all.nl> (raw)
In-Reply-To: <20190717090345.26521-1-hverkuil-cisco@xs4all.nl>
Modern V4L2 drivers should use struct v4l2_fh to represent a filehandle.
This driver was one of the few that didn't use it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
drivers/media/platform/via-camera.c | 47 +++++++++++++++++------------
1 file changed, 27 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c
index f9016c2ee70d..49e51feebc7d 100644
--- a/drivers/media/platform/via-camera.c
+++ b/drivers/media/platform/via-camera.c
@@ -660,19 +660,22 @@ static const struct videobuf_queue_ops viacam_vb_ops = {
static int viacam_open(struct file *filp)
{
struct via_camera *cam = video_drvdata(filp);
+ int ret;
- filp->private_data = cam;
/*
* Note the new user. If this is the first one, we'll also
* need to power up the sensor.
*/
mutex_lock(&cam->lock);
- if (cam->users == 0) {
- int ret = viafb_request_dma();
+ ret = v4l2_fh_open(filp);
+ if (ret)
+ goto out;
+ if (v4l2_fh_is_singular_file(filp)) {
+ ret = viafb_request_dma();
if (ret) {
- mutex_unlock(&cam->lock);
- return ret;
+ v4l2_fh_release(filp);
+ goto out;
}
via_sensor_power_up(cam);
set_bit(CF_CONFIG_NEEDED, &cam->flags);
@@ -685,16 +688,19 @@ static int viacam_open(struct file *filp)
sizeof(struct videobuf_buffer), cam, NULL);
}
(cam->users)++;
+out:
mutex_unlock(&cam->lock);
- return 0;
+ return ret;
}
static int viacam_release(struct file *filp)
{
struct via_camera *cam = video_drvdata(filp);
+ bool last_open;
mutex_lock(&cam->lock);
(cam->users)--;
+ last_open = v4l2_fh_is_singular_file(filp);
/*
* If the "owner" is closing, shut down any ongoing
* operations.
@@ -714,11 +720,12 @@ static int viacam_release(struct file *filp)
/*
* Last one out needs to turn out the lights.
*/
- if (cam->users == 0) {
+ if (last_open) {
videobuf_mmap_free(&cam->vb_queue);
via_sensor_power_down(cam);
viafb_release_dma();
}
+ v4l2_fh_release(filp);
mutex_unlock(&cam->lock);
return 0;
}
@@ -927,7 +934,7 @@ static int viacam_do_try_fmt(struct via_camera *cam,
static int viacam_try_fmt_vid_cap(struct file *filp, void *priv,
struct v4l2_format *fmt)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
struct v4l2_format sfmt;
int ret;
@@ -941,7 +948,7 @@ static int viacam_try_fmt_vid_cap(struct file *filp, void *priv,
static int viacam_g_fmt_vid_cap(struct file *filp, void *priv,
struct v4l2_format *fmt)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
mutex_lock(&cam->lock);
fmt->fmt.pix = cam->user_format;
@@ -952,7 +959,7 @@ static int viacam_g_fmt_vid_cap(struct file *filp, void *priv,
static int viacam_s_fmt_vid_cap(struct file *filp, void *priv,
struct v4l2_format *fmt)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
int ret;
struct v4l2_format sfmt;
struct via_format *f = via_find_format(fmt->fmt.pix.pixelformat);
@@ -1004,7 +1011,7 @@ static int viacam_querycap(struct file *filp, void *priv,
static int viacam_reqbufs(struct file *filp, void *priv,
struct v4l2_requestbuffers *rb)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
return videobuf_reqbufs(&cam->vb_queue, rb);
}
@@ -1012,28 +1019,28 @@ static int viacam_reqbufs(struct file *filp, void *priv,
static int viacam_querybuf(struct file *filp, void *priv,
struct v4l2_buffer *buf)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
return videobuf_querybuf(&cam->vb_queue, buf);
}
static int viacam_qbuf(struct file *filp, void *priv, struct v4l2_buffer *buf)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
return videobuf_qbuf(&cam->vb_queue, buf);
}
static int viacam_dqbuf(struct file *filp, void *priv, struct v4l2_buffer *buf)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
return videobuf_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK);
}
static int viacam_streamon(struct file *filp, void *priv, enum v4l2_buf_type t)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
int ret = 0;
if (t != V4L2_BUF_TYPE_VIDEO_CAPTURE)
@@ -1084,7 +1091,7 @@ static int viacam_streamon(struct file *filp, void *priv, enum v4l2_buf_type t)
static int viacam_streamoff(struct file *filp, void *priv, enum v4l2_buf_type t)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
int ret;
if (t != V4L2_BUF_TYPE_VIDEO_CAPTURE)
@@ -1113,7 +1120,7 @@ static int viacam_streamoff(struct file *filp, void *priv, enum v4l2_buf_type t)
static int viacam_g_parm(struct file *filp, void *priv,
struct v4l2_streamparm *parm)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
int ret;
mutex_lock(&cam->lock);
@@ -1126,7 +1133,7 @@ static int viacam_g_parm(struct file *filp, void *priv,
static int viacam_s_parm(struct file *filp, void *priv,
struct v4l2_streamparm *parm)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
int ret;
mutex_lock(&cam->lock);
@@ -1153,7 +1160,7 @@ static int viacam_enum_framesizes(struct file *filp, void *priv,
static int viacam_enum_frameintervals(struct file *filp, void *priv,
struct v4l2_frmivalenum *interval)
{
- struct via_camera *cam = priv;
+ struct via_camera *cam = video_drvdata(filp);
struct v4l2_subdev_frame_interval_enum fie = {
.index = interval->index,
.code = cam->mbus_code,
@@ -1427,10 +1434,10 @@ static int viacam_probe(struct platform_device *pdev)
*/
cam->vdev = viacam_v4l_template;
cam->vdev.v4l2_dev = &cam->v4l2_dev;
+ video_set_drvdata(&cam->vdev, cam);
ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
if (ret)
goto out_irq;
- video_set_drvdata(&cam->vdev, cam);
#ifdef CONFIG_PM
/*
--
2.20.1
next prev parent reply other threads:[~2019-07-17 9:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 9:03 [PATCH 0/4] via-camera/ov7670: various fixes/improvements Hans Verkuil
2019-07-17 9:03 ` [PATCH 1/4] via-camera: call viafb_pm_unregister in remove() Hans Verkuil
2019-07-17 9:03 ` Hans Verkuil [this message]
2019-07-21 14:30 ` [PATCH 2/4] via-camera: use struct v4l2_fh Ezequiel Garcia
2019-07-17 9:03 ` [PATCH 3/4] ov7670: don't return ENOTTY if SUBDEV_API is not set Hans Verkuil
2019-07-17 9:03 ` [PATCH 4/4] via-camera: fix v4l2-compliance fails Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717090345.26521-3-hverkuil-cisco@xs4all.nl \
--to=hverkuil-cisco@xs4all.nl \
--cc=corbet@lwn.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).