From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.2 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1FD20C7618B for ; Mon, 29 Jul 2019 10:40:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id CCBFC206BA for ; Mon, 29 Jul 2019 10:40:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387470AbfG2Kkx (ORCPT ); Mon, 29 Jul 2019 06:40:53 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:53891 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2387451AbfG2Kkx (ORCPT ); Mon, 29 Jul 2019 06:40:53 -0400 Received: from pty.hi.pengutronix.de ([2001:67c:670:100:1d::c5]) by metis.ext.pengutronix.de with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1hs35C-0007bt-BI; Mon, 29 Jul 2019 12:40:46 +0200 Received: from mfe by pty.hi.pengutronix.de with local (Exim 4.89) (envelope-from ) id 1hs35A-0002qb-Us; Mon, 29 Jul 2019 12:40:44 +0200 Date: Mon, 29 Jul 2019 12:40:44 +0200 From: Marco Felsch To: Sakari Ailus Cc: mchehab@kernel.org, robh+dt@kernel.org, Jacopo Mondi , devicetree@vger.kernel.org, graphics@pengutronix.de, linux-media@vger.kernel.org Subject: Re: [PATCH v2 2/2] media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver Message-ID: <20190729104044.svemh7jvt2kiyn36@pengutronix.de> References: <20190619152838.25079-1-m.felsch@pengutronix.de> <20190619152838.25079-3-m.felsch@pengutronix.de> <20190625122719.xcl3gxxs4gpuvetf@paasikivi.fi.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20190625122719.xcl3gxxs4gpuvetf@paasikivi.fi.intel.com> X-Sent-From: Pengutronix Hildesheim X-URL: http://www.pengutronix.de/ X-IRC: #ptxdist @freenode X-Accept-Language: de,en X-Accept-Content-Type: text/plain X-Uptime: 10:19:56 up 59 days, 14:38, 51 users, load average: 0.00, 0.04, 0.08 User-Agent: NeoMutt/20170113 (1.7.2) X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::c5 X-SA-Exim-Mail-From: mfe@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-media@vger.kernel.org Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Sakari, On 19-06-25 15:27, Sakari Ailus wrote: > Hi Marco, > > Thanks for the set. > > Looks quite good to me in general; a few minor comments below. Sorry for the delayed response. > On Wed, Jun 19, 2019 at 05:28:38PM +0200, Marco Felsch wrote: > > Adding support for the TC358746 bridge. The Bridge can receive images on > > the parallel input port and send it to the host using the CSI-TX unit. > > Furthermore the Bridge can receive images from the host using the CSI-RX > > unit and send it to the parallel output port. > > > > Currently the only the first case is implemented and tested. The bridge > > driver needs two information from the connected sensor: hblank time and > > pixel-rate. Both information are requested using the v4l2_ctrl interface. > > The driver won't create a media-link if one or both information are > > missing. > > > > Missing feature: > > - Provide mclk on GPIO[0] > > - Sending pictures from the host to a parallel display > > - v4l_event support > > > > Signed-off-by: Marco Felsch > > --- > > Changes > > v2: > > - adapt Kconfig symbole description > > - reorder includes alphabetical > > - drop refclk input-clock is named 'refclk' > > - fix module license to GPL v2 > > - use unsigned int for zero-based count vars > > - use unsigned int for width parameter in tc358746_adjust_fifo_size() > > tc358746_adjust_timings() > > - use unsgined int for state->link_freq local variables since that > > can't be negative > > - drop tc358746_g_mbus_config() since it will be removed soon > > - store the sensor_pclk_ctrl and sensor_hblank_ctrl references to > > request the ctrl's only once. > > - replace dev_*() by v4l2_*() macros > > - move to probe_new() and drop i2c_device_id table > > - improve error path during probe() > > - change i2c_wr16_and_or() logic so the user only have to specify the > > mask. This avoids build warnings due to '-Woverflow' compilations. > > The bug was found by the kbuild test robot. > > > > drivers/media/i2c/Kconfig | 12 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/tc358746.c | 1807 +++++++++++++++++++++++++++++ > > drivers/media/i2c/tc358746_regs.h | 208 ++++ > > 4 files changed, 2028 insertions(+) > > create mode 100644 drivers/media/i2c/tc358746.c > > create mode 100644 drivers/media/i2c/tc358746_regs.h > > > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index cb8db944aa41..454d8f682126 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -360,6 +360,18 @@ config VIDEO_TC358743_CEC > > When selected the tc358743 will support the optional > > HDMI CEC feature. > > > > +config VIDEO_TC358746 > > + tristate "Toshiba TC358746 parallel-CSI2 bridge" > > + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER > > + select V4L2_FWNODE > > + help > > + Support for the Toshiba TC358746 PARALLEL to MIPI CSI-2 bridge. > > + The bridge can work in both directions but currenty only the > > "currently" Fixed, thanks. > > + parallel-in / csi-out path is supported. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called tc358746. > > + > > config VIDEO_TVP514X > > tristate "Texas Instruments TVP514x video decoder" > > depends on VIDEO_V4L2 && I2C > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index d8ad9dad495d..3d5073cc26cf 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -108,6 +108,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o > > obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o > > obj-$(CONFIG_VIDEO_OV2659) += ov2659.o > > obj-$(CONFIG_VIDEO_TC358743) += tc358743.o > > +obj-$(CONFIG_VIDEO_TC358746) += tc358746.o > > obj-$(CONFIG_VIDEO_IMX214) += imx214.o > > obj-$(CONFIG_VIDEO_IMX258) += imx258.o > > obj-$(CONFIG_VIDEO_IMX274) += imx274.o > > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c > > new file mode 100644 > > index 000000000000..58612824b267 > > --- /dev/null > > +++ b/drivers/media/i2c/tc358746.c > > @@ -0,0 +1,1807 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * tc358746 - Parallel to CSI-2 bridge > > + * > > + * Copyright 2018 Marco Felsch > > + * > > + * References: > > + * REF_01: > > + * - TC358746AXBG/TC358748XBG/TC358748IXBG Functional Specification Rev 1.2 > > + * REF_02: > > + * - TC358746(A)748XBG_Parallel-CSI2_Tv23p.xlsx, Rev Tv23 > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#include "tc358746_regs.h" > > + > > +static int debug; > > +module_param(debug, int, 0644); > > +MODULE_PARM_DESC(debug, "debug level (0-3)"); > > + > > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver"); > > +MODULE_AUTHOR("Marco Felsch "); > > +MODULE_LICENSE("GPL v2"); > > These are usually placed at the end. Okay, I will move it at the end. > > + > > +#define I2C_MAX_XFER_SIZE (512 + 2) > > +#define TC358746_MAX_FIFO_SIZE 512 > > +#define TC358746_DEF_LINK_FREQ 0 > > + > > +#define TC358746_LINEINIT_MIN_US 110 > > +#define TC358746_TWAKEUP_MIN_US 1200 > > +#define TC358746_LPTXTIME_MIN_NS 55 > > +#define TC358746_TCLKZERO_MIN_NS 305 > > +#define TC358746_TCLKTRAIL_MIN_NS 65 > > +#define TC358746_TCLKPOST_MIN_NS 65 > > +#define TC358746_THSZERO_MIN_NS 150 > > +#define TC358746_THSTRAIL_MIN_NS 65 > > +#define TC358746_THSPREPARE_MIN_NS 45 > > + > > +static const struct v4l2_mbus_framefmt tc358746_def_fmt = { > > + .width = 640, > > + .height = 480, > > + .code = MEDIA_BUS_FMT_UYVY8_2X8, > > + .field = V4L2_FIELD_NONE, > > + .colorspace = V4L2_COLORSPACE_DEFAULT, > > + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, > > + .quantization = V4L2_QUANTIZATION_DEFAULT, > > + .xfer_func = V4L2_XFER_FUNC_DEFAULT, > > +}; > > + > > +struct tc358746_csi_param { > > + unsigned char speed_range; > > + unsigned int unit_clk_hz; > > + unsigned char unit_clk_mul; > > + unsigned int speed_per_lane; /* bps / lane */ > > + unsigned short lane_num; > > + bool is_continuous_clk; > > + > > + /* CSI2-TX Parameters */ > > + u32 lineinitcnt; > > + u32 lptxtimecnt; > > + u32 twakeupcnt; > > + u32 tclk_preparecnt; > > + u32 tclk_zerocnt; > > + u32 tclk_trailcnt; > > + u32 tclk_postcnt; > > + u32 ths_preparecnt; > > + u32 ths_zerocnt; > > + u32 ths_trailcnt; > > + > > + unsigned int csi_hs_lp_hs_ps; > > +}; > > Would it be possible to use struct phy_configure_opts_mipi_dphy and perhaps > phy_mipi_dphy_get_default_config() as well? The result of the latter will > surely be different though, but still expected to be valid. I've checked the struct phy_configure_opts_mipi_dphy and have a few points to think about: 1) The values I need here are counter values. The struct you mentioned uses time based values. This is good but needs a retranslation into the count values. 2) The tclk_zerocnt and tclk_zerocnt has a other meaning here: tclk_zerocnt = ckl_prepare + clk_zero > 300ns ths_zerocnt = hs_prepare + hs_zero > 145ns + 10 * ui I can use the struct phy_configure_opts_mipi_dphy but then the meaning are not the same.. If I should use the phy_mipi_dphy_get_default_config() helper I had to reconstruct the whole logic. Currently the driver is based on the following behaviour: - the fw (DT in our case) defines possible link frequencies and data lane numbers - based on that information I calculate possible counter values to confirm the mipi-spec - now the user specifies a format and I try to serve the request by - adjusting the fifo-size if not possible - use other link frequency setting and retry adjusting fifo_size if till not possible - begin to reduce the resultion Imagine it that way: I configure the dphy side and adjust the parallel side. Now phy_mipi_dphy_get_default_config() uses the format bpp and the pixel_clk to calculate the exact default config. Those configs must be converted to the counter values. This wouldn't be a big deal but the excel-sheet I used to calculate the timings adds some "random" undocumented constants. So it would not be just a conversion from a time-val to a counter-val. After that we need to verify the parallel-input settings against the dphy-settings and do proper fifo/picture-soze adjustments. I would keep my approach beacause of the "random" undocumented constants and the other meaning of the struct phy_configure_opts_mipi_dphy members. Maybe I can convert it later if I have more time to verify that the "random" undocumented constants aren't important and can be dropped. Also I checked a few other Toshiba TC convert chips and it seems that all off them uses the same DPHY. So maybe we should split out the phy-part to share it. > > + > > +enum tc358746_csi_direction { > > + TC358746_CSI_RX, /* CSI-in -> Parallel-out */ > > + TC358746_CSI_TX /* Parallel-in -> CSI-out */ > > +}; > > + > > +struct tc358746_state { > > + struct v4l2_subdev sd; > > + struct i2c_client *i2c_client; > > + struct gpio_desc *reset_gpio; > > + > > + /* > > + * Generic > > + */ > > + struct media_pad pads[2]; > > + struct mutex confctl_mutex; > > + struct v4l2_mbus_framefmt fmt; > > + struct v4l2_ctrl_handler hdl; > > + bool fmt_changed; > > + bool test; > > + > > + /* > > + * Chip Clocks > > + */ > > + struct clk *refclk; > > + /* internal pll */ > > + unsigned int pllinclk_hz; > > + u16 pll_prd; > > + u16 pll_fbd; > > + > > + /* > > + * Video Buffer > > + */ > > + u16 vb_fifo; /* The FIFO size is 511x32 */ > > + > > + /* currently only TC358746_CSI_TX supported */ > > + enum tc358746_csi_direction csi_dir; > > + > > + /* > > + * CSI TX > > + */ > > + struct v4l2_ctrl *link_freq; > > + struct tc358746_csi_param *link_freq_settings; > > + u64 *link_frequencies; > > + unsigned int link_frequencies_num; > > + > > + /* > > + * Parallel input > > + */ > > + struct v4l2_ctrl *sensor_pclk_ctrl; > > + struct v4l2_ctrl *sensor_hblank_ctrl; > > + unsigned int pclk; > > + unsigned int hblank; > > +}; > > + > > +struct tc358746_mbus_fmt { > > + u32 code; > > + u8 bus_width; > > + u8 bpp; /* total bpp */ > > + u8 pdformat; /* peripheral data format */ > > + u8 pdataf; /* parallel data format option */ > > + u8 ppp; /* pclk per pixel */ > > + bool csitx_only; /* format only in csi-tx mode supported */ > > +}; > > + > > +/* TODO: Add other formats as required */ > > +static const struct tc358746_mbus_fmt tc358746_formats[] = { > > + { > > + .code = MEDIA_BUS_FMT_UYVY8_2X8, > > Note that on CSI-2 V4L2 uses the one pixel / sample variants. I.e. this > would be MEDIA_BUS_FMT_UYVY8_1X16. Sorry but I didn't get you. The format you mentioned is... > > + .bus_width = 8, > > + .bpp = 16, > > + .pdformat = DATAFMT_PDFMT_YCBCRFMT_422_8_BIT, > > + .pdataf = CONFCTL_PDATAF_MODE0, > > + .ppp = 2, > > + }, { > > + .code = MEDIA_BUS_FMT_UYVY8_1X16, here. > > + .bus_width = 16, > > + .bpp = 16, > > + .pdformat = DATAFMT_PDFMT_YCBCRFMT_422_8_BIT, > > + .pdataf = CONFCTL_PDATAF_MODE1, > > + .ppp = 1, > > + }, { > > + .code = MEDIA_BUS_FMT_YUYV8_1X16, > > + .bus_width = 16, > > + .bpp = 16, > > + .pdformat = DATAFMT_PDFMT_YCBCRFMT_422_8_BIT, > > + .pdataf = CONFCTL_PDATAF_MODE2, > > + .ppp = 1, > > + }, { > > + .code = MEDIA_BUS_FMT_UYVY10_2X10, > > + .bus_width = 10, > > + .bpp = 20, > > + .pdformat = DATAFMT_PDFMT_YCBCRFMT_422_10_BIT, > > + .pdataf = CONFCTL_PDATAF_MODE0, /* don't care */ > > + .ppp = 2, > > + }, { > > + /* in datasheet listed as YUV444 */ > > + .code = MEDIA_BUS_FMT_GBR888_1X24, > > + .bus_width = 24, > > + .bpp = 24, > > + .pdformat = DATAFMT_PDFMT_YCBCRFMT_444, > > + .pdataf = CONFCTL_PDATAF_MODE0, /* don't care */ > > + .ppp = 2, > > + .csitx_only = true, > > + }, > > +}; > > + > > +/* --------------- HELPERS ------------ */ > > +static void > > +tc358746_dump_csi(struct v4l2_subdev *sd, > > + struct tc358746_csi_param *csi_setting) > > +{ > > + v4l2_dbg(2, debug, sd, "Speed-Range value %u\n", > > + csi_setting->speed_range); > > + v4l2_dbg(2, debug, sd, "Unit Clock %u Hz\n", csi_setting->unit_clk_hz); > > + v4l2_dbg(2, debug, sd, "Unit Clock Mul %u\n", > > + csi_setting->unit_clk_mul); > > + v4l2_dbg(2, debug, sd, "CSI speed/lane %u bps/lane\n", > > + csi_setting->speed_per_lane); > > + v4l2_dbg(2, debug, sd, "CSI lanes %u\n", csi_setting->lane_num); > > + v4l2_dbg(2, debug, sd, "CSI clock during LP %sabled\n", > > + csi_setting->is_continuous_clk ? "en" : "dis"); > > + > > + v4l2_dbg(2, debug, sd, "lineinitcnt %u\n", csi_setting->lineinitcnt); > > + v4l2_dbg(2, debug, sd, "lptxtimecnt %u\n", csi_setting->lptxtimecnt); > > + v4l2_dbg(2, debug, sd, "tclk_preparecnt %u\n", > > + csi_setting->tclk_preparecnt); > > + v4l2_dbg(2, debug, sd, "tclk_zerocnt %u\n", csi_setting->tclk_zerocnt); > > + v4l2_dbg(2, debug, sd, "tclk_trailcnt %u\n", > > + csi_setting->tclk_trailcnt); > > + v4l2_dbg(2, debug, sd, "ths_preparecnt %u\n", > > + csi_setting->ths_preparecnt); > > + v4l2_dbg(2, debug, sd, "ths_zerocnt %u\n", csi_setting->ths_zerocnt); > > + v4l2_dbg(2, debug, sd, "twakeupcnt %u\n", csi_setting->twakeupcnt); > > + v4l2_dbg(2, debug, sd, "tclk_postcnt %u\n", csi_setting->tclk_postcnt); > > + v4l2_dbg(2, debug, sd, "ths_trailcnt %u\n", csi_setting->ths_trailcnt); > > + v4l2_dbg(2, debug, sd, "csi_hs_lp_hs_ps %u (%u us)\n", > > + csi_setting->csi_hs_lp_hs_ps, > > + csi_setting->csi_hs_lp_hs_ps / 1000); > > +} > > + > > +static void > > +tc358746_dump_pll(struct v4l2_subdev *sd, struct tc358746_state *state) > > +{ > > + v4l2_dbg(2, debug, sd, "refclk %lu Hz\n", clk_get_rate(state->refclk)); > > + v4l2_dbg(2, debug, sd, "pll input clock %u Hz\n", state->pllinclk_hz); > > + v4l2_dbg(2, debug, sd, "PLL_PRD %u\n", state->pll_prd - 1); > > + v4l2_dbg(2, debug, sd, "PLL_FBD %u\n", state->pll_fbd - 1); > > +} > > + > > +static inline struct tc358746_state *to_state(struct v4l2_subdev *sd) > > +{ > > + return container_of(sd, struct tc358746_state, sd); > > +} > > + > > +/* Find a data format by a pixel code */ > > +static int tc358746_format_supported(u32 code) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) > > + if (tc358746_formats[i].code == code) > > + return 0; > > + > > + return -EINVAL; > > +} > > + > > +static struct tc358746_csi_param * > > +tc358746_g_cur_csi_settings(struct tc358746_state *state) > > +{ > > + unsigned int cur_freq = v4l2_ctrl_g_ctrl(state->link_freq); > > + > > + return &state->link_freq_settings[cur_freq]; > > +} > > + > > +static const struct tc358746_mbus_fmt *tc358746_get_format(u32 code) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) > > + if (tc358746_formats[i].code == code) > > + return &tc358746_formats[i]; > > + > > + return NULL; > > +} > > + > > +static int > > +tc358746_adjust_fifo_size(struct tc358746_state *state, > > + const struct tc358746_mbus_fmt *format, > > + struct tc358746_csi_param *csi_settings, > > + unsigned int width, u16 *fifo_size) > > +{ > > + int c_hactive_ps_diff, c_lp_active_ps_diff, c_fifo_delay_ps_diff; > > + unsigned int p_hactive_ps, p_hblank_ps, p_htotal_ps; > > + unsigned int c_hactive_ps, c_lp_active_ps, c_fifo_delay_ps; > > + unsigned int csi_bps, csi_bps_period_ps; > > + unsigned int csi_hsclk, csi_hsclk_period_ps; > > + unsigned int pclk_period_ps; > > + unsigned int _fifo_size; > > + > > + pclk_period_ps = 1000000000 / (state->pclk / 1000); > > + csi_bps = csi_settings->speed_per_lane * csi_settings->lane_num; > > + csi_bps_period_ps = 1000000000 / (csi_bps / 1000); > > + csi_hsclk = csi_settings->speed_per_lane >> 3; > > + csi_hsclk_period_ps = 1000000000 / (csi_hsclk / 1000); > > + > > + /* > > + * Calculation: > > + * p_hactive_ps = pclk_period_ps * pclk_per_pixel * h_active_pixel > > + */ > > + p_hactive_ps = pclk_period_ps * format->ppp * width; > > + > > + /* > > + * Calculation: > > + * p_hblank_ps = pclk_period_ps * h_blank_pixel > > + */ > > + p_hblank_ps = pclk_period_ps * state->hblank; > > + p_htotal_ps = p_hblank_ps + p_hactive_ps; > > + > > + /* > > + * Adjust the fifo size to adjust the csi timing. Hopefully we can find > > + * a fifo size where the parallel input timings and the csi tx timings > > + * fit together. > > + */ > > + for (_fifo_size = 1; _fifo_size < TC358746_MAX_FIFO_SIZE; > > + _fifo_size++) { > > + /* > > + * Calculation: > > + * c_fifo_delay_ps = (fifo_size * 32) / parallel_bus_width * > > + * pclk_period_ps + 4 * csi_hsclk_period_ps > > + */ > > + c_fifo_delay_ps = _fifo_size * 32 * pclk_period_ps; > > + c_fifo_delay_ps /= format->bus_width; > > + c_fifo_delay_ps += 4 * csi_hsclk_period_ps; > > + > > + /* > > + * Calculation: > > + * c_hactive_ps = csi_bps_period_ps * image_bpp * h_active_pixel > > + * + c_fifo_delay > > + */ > > + c_hactive_ps = csi_bps_period_ps * format->bpp * width; > > + c_hactive_ps += c_fifo_delay_ps; > > + > > + /* > > + * Calculation: > > + * c_lp_active_ps = p_htotal_ps - c_hactive_ps > > + */ > > + c_lp_active_ps = p_htotal_ps - c_hactive_ps; > > + > > + c_hactive_ps_diff = c_hactive_ps - p_hactive_ps; > > + c_fifo_delay_ps_diff = p_htotal_ps - c_hactive_ps; > > + c_lp_active_ps_diff = > > + c_lp_active_ps - csi_settings->csi_hs_lp_hs_ps; > > + > > + if (c_hactive_ps_diff > 0 && > > + c_fifo_delay_ps_diff > 0 && > > + c_lp_active_ps_diff > 0) > > + break; > > + } > > + > > + /* > > + * If we can't transfer the image using this csi link frequency try to > > + * use another link freq. > > + */ > > + v4l2_dbg(1, debug, &state->sd, "found fifo-size %d\n", > > + _fifo_size == TC358746_MAX_FIFO_SIZE ? -1 : _fifo_size); > > + *fifo_size = _fifo_size; > > + return _fifo_size == TC358746_MAX_FIFO_SIZE ? -EINVAL : 0; > > +} > > + > > +static int > > +tc358746_adjust_timings(struct tc358746_state *state, > > + const struct tc358746_mbus_fmt *format, > > + unsigned int *width, u16 *fifo_size) > > +{ > > + > > + unsigned int cur_freq = v4l2_ctrl_g_ctrl(state->link_freq); > > + unsigned int freq = cur_freq; > > + struct tc358746_csi_param *csi_lane_setting; > > + int err; > > + int _width; > > + > > + /* > > + * Adjust timing: > > + * 1) Try to use the desired width and the current csi-link-frequency > > + * 2) If this doesn't fit try other csi-link-frequencies > > + * 3) If this doesn't fit too, reducing the desired width and test > > + * it again width the current csi-link-frequency > > + * 4) Goto step 2 if it doesn't fit at all > > + */ > > + for (_width = *width; _width > 0; _width -= 10) { > > + csi_lane_setting = &state->link_freq_settings[cur_freq]; > > + err = tc358746_adjust_fifo_size(state, format, csi_lane_setting, > > + _width, fifo_size); > > + if (!err) > > + goto out; > > + > > + for (freq = 0; freq < state->link_frequencies_num; freq++) { > > + if (freq == cur_freq) > > + continue; > > + > > + csi_lane_setting = &state->link_freq_settings[freq]; > > + err = tc358746_adjust_fifo_size(state, format, > > + csi_lane_setting, > > + _width, fifo_size); > > + if (!err) > > + goto out; > > + } > > + } > > + > > +out: > > + *width = _width; > > + return freq; > > +} > > + > > +static int > > +tc358746_calculate_csi_txtimings(struct tc358746_state *state, > > + struct tc358746_csi_param *csi_setting) > > +{ > > + unsigned int spl; > > + unsigned int spl_p_ps, hsclk_p_ps, hfclk_p_ns; > > + unsigned int hfclk, hsclk; /* SYSCLK */ > > + unsigned int tmp; > > + unsigned int lptxtime_ps, tclk_post_ps, tclk_trail_ps, tclk_zero_ps, > > + ths_trail_ps, ths_zero_ps; > > + > > + spl = csi_setting->speed_per_lane; > > + hsclk = spl >> 3; /* spl in bit-per-second, hsclk in byte-per-sercond */ > > + hfclk = hsclk >> 1; /* HFCLK = SYSCLK / 2 */ > > + > > + if (hsclk > 125000000U) { > > + v4l2_err(&state->sd, "unsupported HS byte clock %d, must <= 125 MHz\n", > > + hsclk); > > + return -EINVAL; > > + } > > + > > + hfclk_p_ns = DIV_ROUND_CLOSEST(1000000000, hfclk); > > + hsclk_p_ps = 1000000000 / (hsclk / 1000); > > + spl_p_ps = 1000000000 / (spl / 1000); > > + > > + /* > > + * Calculation: > > + * hfclk_p_ns * lineinitcnt > 100us > > + * lineinitcnt > 100 * 10^-6s / hfclk_p_ns * 10^-9 > > + * > > + */ > > + csi_setting->lineinitcnt = DIV_ROUND_UP(TC358746_LINEINIT_MIN_US * 1000, > > + hfclk_p_ns); > > + > > + /* > > + * Calculation: > > + * (lptxtimecnt + 1) * hsclk_p_ps > 50ns > > + * 38ns < (tclk_preparecnt + 1) * hsclk_p_ps < 95ns > > + */ > > + csi_setting->lptxtimecnt = csi_setting->tclk_preparecnt = > > + DIV_ROUND_UP(TC358746_LPTXTIME_MIN_NS * 1000, hsclk_p_ps) - 1; > > + > > + /* > > + * Limit: > > + * (tclk_zero + tclk_prepar) period > 300ns. > > + * Since we have no upper limit and for simplicity: > > + * tclk_zero > 300ns. > > + * > > + * Calculation: > > + * tclk_zero = ([2,3] + tclk_zerocnt) * hsclk_p_ps + ([2,3] * spl_p_ps) > > + * > > + * Note: REF_02 uses > > + * tclk_zero = (2.5 + tclk_zerocnt) * hsclk_p_ps + (3.5 * spl_p_ps) > > + */ > > + tmp = TC358746_TCLKZERO_MIN_NS * 1000 - 3 * spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->tclk_zerocnt = tmp - 2; > > + > > + /* > > + * Limit: > > + * 40ns + 4 * spl_p_ps < (ths_preparecnt + 1) * hsclk_p_ps > > + * < 85ns + 6 * spl_p_ps > > + */ > > + tmp = TC358746_THSPREPARE_MIN_NS * 1000 + 4 * spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->ths_preparecnt = tmp - 1; > > + > > + /* > > + * Limit: > > + * (ths_zero + ths_prepare) period > 145ns + 10 * spl_p_ps. > > + * Since we have no upper limit and for simplicity: > > + * ths_zero period > 145ns + 10 * spl_p_ps. > > + * > > + * Calculation: > > + * ths_zero = ([6,8] + ths_zerocnt) * hsclk_p_ps + [3,4] * hsclk_p_ps + > > + * [13,14] * spl_p_ps > > + * > > + * Note: REF_02 uses > > + * ths_zero = (7 + ths_zerocnt) * hsclk_p_ps + 4 * hsclk_p_ps + > > + * 11 * spl_p_ps > > + */ > > + tmp = TC358746_THSZERO_MIN_NS * 1000 - spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->ths_zerocnt = tmp < 11 ? 0 : tmp - 11; > > + > > + /* > > + * Limit: > > + * hsclk_p_ps * (lptxtimecnt + 1) * (twakeupcnt + 1) > 1ms > > + * > > + * Since we have no upper limit use 1.2ms as lower limit to > > + * surley meet the spec limit. > > + */ > > + tmp = hsclk_p_ps / 1000; /* tmp = hsclk_p_ns */ > > + csi_setting->twakeupcnt = > > + DIV_ROUND_UP(TC358746_TWAKEUP_MIN_US * 1000, > > + tmp * (csi_setting->lptxtimecnt + 1)) - 1; > > + > > + /* > > + * Limit: > > + * 60ns + 4 * spl_p_ps < thstrail < 105ns + 12 * spl_p_ps > > + * > > + * Calculation: > > + * thstrail = (1 + ths_trailcnt) * hsclk_p_ps + [3,4] * hsclk_p_ps - > > + * [13,14] * spl_p_ps > > + * > > + * [2] set formula to: > > + * thstrail = (1 + ths_trailcnt) * hsclk_p_ps + 4 * hsclk_p_ps - > > + * 11 * spl_p_ps > > + */ > > + tmp = TC358746_THSTRAIL_MIN_NS * 1000 + 15 * spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->ths_trailcnt = tmp - 5; > > + > > + /* > > + * Limit: > > + * 60ns < tclk_trail < 105ns + 12 * spl_p_ps > > + * > > + * Limit used by REF_02: > > + * 60ns < tclk_trail < 105ns + 12 * spl_p_ps - 30 > > + * > > + * Calculation: > > + * tclk_trail = ([1,2] + tclk_trailcnt) * hsclk_p_ps + > > + * (2 + [1,2]) * hsclk_p_ps - [2,3] * spl_p_ps > > + * > > + * Calculation used by REF_02: > > + * tclk_trail = (1 + tclk_trailcnt) * hsclk_p_ps + > > + * 4 * hsclk_p_ps - 3 * spl_p_ps > > + */ > > + tmp = TC358746_TCLKTRAIL_MIN_NS * 1000 + 3 * spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->tclk_trailcnt = tmp < 5 ? 0 : tmp - 5; > > + > > + /* > > + * Limit: > > + * tclk_post > 60ns + 52 * spl_p_ps > > + * > > + * Limit used by REF_02: > > + * tclk_post > 60ns + 52 * spl_p_ps > > + * > > + * Calculation: > > + * tclk_post = ([1,2] + (tclk_postcnt + 1)) * hsclk_p_ps + hsclk_p_ps > > + * > > + * Note REF_02 uses: > > + * tclk_post = (2.5 + tclk_postcnt) * hsclk_p_ps + hsclk_p_ps + > > + * 2.5 * spl_p_ps > > + * To meet the REF_02 validation limits following equation is used: > > + * tclk_post = (2 + tclk_postcnt) * hsclk_p_ps + hsclk_p_ps + > > + * 3 * spl_p_ps > > + */ > > + tmp = TC358746_TCLKPOST_MIN_NS * 1000 + 49 * spl_p_ps; > > + tmp = DIV_ROUND_UP(tmp, hsclk_p_ps); > > + csi_setting->tclk_postcnt = tmp - 3; > > + > > + /* > > + * Last calculate the csi hs->lp->hs transistion time in ns. Note REF_02 > > + * mixed units in the equation for the continuous case. I don't know if > > + * this was the intention. The driver drops the last 'multiply all by > > + * two' to get nearly the same results. > > + */ > > + lptxtime_ps = (csi_setting->lptxtimecnt + 1) * hsclk_p_ps; > > + tclk_post_ps = > > + (4 + csi_setting->tclk_postcnt) * hsclk_p_ps + 3 * spl_p_ps; > > + tclk_trail_ps = > > + (5 + csi_setting->tclk_trailcnt) * hsclk_p_ps - 3 * spl_p_ps; > > + tclk_zero_ps = > > + (2 + csi_setting->tclk_zerocnt) * hsclk_p_ps + 3 * spl_p_ps; > > + ths_trail_ps = > > + (5 + csi_setting->ths_trailcnt) * hsclk_p_ps - 11 * spl_p_ps; > > + ths_zero_ps = > > + (7 + csi_setting->ths_zerocnt) * hsclk_p_ps + 4 * hsclk_p_ps + > > + 11 * spl_p_ps; > > + > > + if (csi_setting->is_continuous_clk) { > > + tmp = 2 * lptxtime_ps; > > + tmp += 25 * hsclk_p_ps; > > + tmp += ths_trail_ps; > > + tmp += ths_zero_ps; > > + } else { > > + tmp = 4 * lptxtime_ps; > > + tmp += ths_trail_ps + tclk_post_ps + tclk_trail_ps + > > + tclk_zero_ps + ths_zero_ps; > > + tmp += (13 + csi_setting->lptxtimecnt * 8) * hsclk_p_ps; > > + tmp += 22 * hsclk_p_ps; > > + tmp *= 3; > > + tmp = DIV_ROUND_CLOSEST(tmp, 2); > > + } > > + csi_setting->csi_hs_lp_hs_ps = tmp; > > + > > + return 0; > > +} > > + > > +/* --------------- i2c helper ------------ */ > > + > > +static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct i2c_client *client = state->i2c_client; > > + int err; > > + u8 buf[2] = { reg >> 8, reg & 0xff }; > > + u8 data[I2C_MAX_XFER_SIZE]; > > + > > + struct i2c_msg msgs[] = { > > + { > > + .addr = client->addr, > > + .flags = 0, > > + .len = 2, > > + .buf = buf, > > + }, > > + { > > + .addr = client->addr, > > + .flags = I2C_M_RD, > > + .len = n, > > + .buf = data, > > + }, > > + }; > > + > > + err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); > > + if (err != ARRAY_SIZE(msgs)) { > > + v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n", > > + __func__, reg, client->addr); > > + } > > + > > + switch (n) { > > + case 1: > > + values[0] = data[0]; > > + break; > > + case 2: > > + values[0] = data[1]; > > + values[1] = data[0]; > > + break; > > + case 4: > > + values[0] = data[1]; > > + values[1] = data[0]; > > + values[2] = data[3]; > > + values[3] = data[2]; > > + break; > > + default: > > + v4l2_info(sd, "unsupported I2C read %d bytes from address 0x%04x\n", > > + n, reg); > > + } > > + > > + if (debug < 3) > > + return; > > + > > + switch (n) { > > + case 1: > > + v4l2_info(sd, "I2C read 0x%04x = 0x%02x", > > + reg, data[0]); > > + break; > > + case 2: > > + v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x", > > + reg, data[0], data[1]); > > + break; > > + case 4: > > + v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x%02x%02x", > > + reg, data[2], data[3], data[0], data[1]); > > + break; > > + default: > > + v4l2_info(sd, "I2C unsupported read %d bytes from address 0x%04x\n", > > + n, reg); > > + } > > +} > > + > > +static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct i2c_client *client = state->i2c_client; > > + int err; > > + struct i2c_msg msg; > > + u8 data[I2C_MAX_XFER_SIZE]; > > + > > + if ((2 + n) > I2C_MAX_XFER_SIZE) { > > + n = I2C_MAX_XFER_SIZE - 2; > > + v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n", > > + reg, 2 + n); > > + } > > + > > + msg.addr = client->addr; > > + msg.buf = data; > > + msg.len = 2 + n; > > + msg.flags = 0; > > + > > + data[0] = reg >> 8; > > + data[1] = reg & 0xff; > > + > > + switch (n) { > > + case 1: > > + data[2 + 0] = values[0]; > > + break; > > + case 2: > > + data[2 + 0] = values[1]; > > + data[2 + 1] = values[0]; > > + break; > > + case 4: > > + data[2 + 0] = values[1]; > > + data[2 + 1] = values[0]; > > + data[2 + 2] = values[3]; > > + data[2 + 3] = values[2]; > > + break; > > + default: > > + v4l2_info(sd, "unsupported I2C write %d bytes from address 0x%04x\n", > > + n, reg); > > You'd need to return here. Perhaps WARN_ON(1) instead of v4l2_info(), as > this would presumably be a driver bug. Okay. > > + } > > + > > + err = i2c_transfer(client->adapter, &msg, 1); > > + if (err != 1) { > > + v4l2_err(sd, "%s: writing register 0x%x from 0x%x failed\n", > > + __func__, reg, client->addr); > > + return; > > + } > > + > > + if (debug < 3) > > + return; > > + > > + switch (n) { > > + case 1: > > + v4l2_info(sd, "I2C write 0x%04x = 0x%02x", reg, data[2 + 0]); > > + break; > > + case 2: > > + v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x", reg, data[2 + 0], > > + data[2 + 1]); > > + break; > > + case 4: > > + v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x%02x%02x", reg, > > + data[2 + 2], data[2 + 3], data[2 + 0], data[2 + 1]); > > + break; > > + default: > > + v4l2_info(sd, "I2C unsupported write %d bytes from address 0x%04x\n", > > + n, reg); > > + } > > +} > > + > > +static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) > > +{ > > + __le32 val = 0; > > + > > + i2c_rd(sd, reg, (u8 __force *)&val, n); > > + > > + return le32_to_cpu(val); > > +} > > + > > +static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) > > +{ > > + __le32 raw = cpu_to_le32(val); > > + > > + i2c_wr(sd, reg, (u8 __force *)&raw, n); > > +} > > + > > +static u16 __maybe_unused i2c_rd8(struct v4l2_subdev *sd, u16 reg) > > +{ > > + return i2c_rdreg(sd, reg, 1); > > +} > > + > > +static u16 __maybe_unused i2c_rd16(struct v4l2_subdev *sd, u16 reg) > > +{ > > + return i2c_rdreg(sd, reg, 2); > > +} > > + > > +static u32 __maybe_unused i2c_rd32(struct v4l2_subdev *sd, u16 reg) > > +{ > > + return i2c_rdreg(sd, reg, 4); > > +} > > + > > +static void __maybe_unused i2c_wr8(struct v4l2_subdev *sd, u16 reg, u16 val) > > +{ > > + i2c_wrreg(sd, reg, val, 1); > > +} > > + > > +static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) > > +{ > > + i2c_wrreg(sd, reg, val, 2); > > +} > > + > > +static void i2c_wr16_and_or(struct v4l2_subdev *sd, u16 reg, u32 mask, u16 val) > > +{ > > + u16 m = (u16) ~mask; > > + > > + i2c_wrreg(sd, reg, (i2c_rd16(sd, reg) & m) | val, 2); > > +} > > + > > +static void i2c_wr32(struct v4l2_subdev *sd, u16 reg, u32 val) > > +{ > > + i2c_wrreg(sd, reg, val, 4); > > +} > > + > > +/* --------------- init --------------- */ > > + > > +static void > > +tc358746_wr_csi_control(struct v4l2_subdev *sd, int val) > > +{ > > + u32 _val; > > + > > + val &= CSI_CONFW_DATA_MASK; > > + _val = CSI_CONFW_MODE_SET_MASK | CSI_CONFW_ADDRESS_CSI_CONTROL_MASK | > > + val; > > + > > + v4l2_dbg(2, debug, sd, "CSI_CONFW 0x%04x\n", _val); > > + i2c_wr32(sd, CSI_CONFW, _val); > > +} > > + > > +static inline void tc358746_sleep_mode(struct v4l2_subdev *sd, int enable) > > +{ > > + i2c_wr16_and_or(sd, SYSCTL, SYSCTL_SLEEP_MASK, > > + enable ? SYSCTL_SLEEP_MASK : 0); > > +} > > + > > +static inline void tc358746_sreset(struct v4l2_subdev *sd) > > +{ > > + i2c_wr16(sd, SYSCTL, SYSCTL_SRESET_MASK); > > + udelay(10); > > + i2c_wr16(sd, SYSCTL, 0); > > +} > > + > > +static inline void tc358746_enable_stream(struct v4l2_subdev *sd, int enable) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + > > + v4l2_dbg(1, debug, sd, "%sable\n", enable ? "en" : "dis"); > > + > > + mutex_lock(&state->confctl_mutex); > > + if (!enable) { > > + i2c_wr16_and_or(sd, PP_MISC, PP_MISC_FRMSTOP_MASK, > > + PP_MISC_FRMSTOP_MASK); > > + i2c_wr16_and_or(sd, CONFCTL, CONFCTL_PPEN_MASK, 0); > > + i2c_wr16_and_or(sd, PP_MISC, PP_MISC_RSTPTR_MASK, > > + PP_MISC_RSTPTR_MASK); > > + > > + i2c_wr32(sd, CSIRESET, (CSIRESET_RESET_CNF_MASK | > > + CSIRESET_RESET_MODULE_MASK)); > > + i2c_wr16(sd, DBG_ACT_LINE_CNT, 0); > > + } else { > > + i2c_wr16(sd, PP_MISC, 0); > > + i2c_wr16_and_or(sd, CONFCTL, CONFCTL_PPEN_MASK, > > + CONFCTL_PPEN_MASK); > > + } > > + mutex_unlock(&state->confctl_mutex); > > +} > > + > > +static void tc358746_set_pll(struct v4l2_subdev *sd) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct tc358746_csi_param *csi_setting = > > + tc358746_g_cur_csi_settings(state); > > + u16 pllctl0 = i2c_rd16(sd, PLLCTL0); > > + u16 pllctl1 = i2c_rd16(sd, PLLCTL1); > > + u16 pll_frs = csi_setting->speed_range; > > + u16 pllctl0_new; > > + > > + /* > > + * Calculation: > > + * speed_per_lane = (pllinclk_hz * (fbd + 1)) / 2^frs > > + * > > + * Calculation used by REF_02: > > + * speed_per_lane = (pllinclk_hz * fbd) / 2^frs > > + */ > > + state->pll_fbd = csi_setting->speed_per_lane / state->pllinclk_hz; > > + state->pll_fbd <<= pll_frs; > > + > > + pllctl0_new = PLLCTL0_PLL_PRD_SET(state->pll_prd) | > > + PLLCTL0_PLL_FBD_SET(state->pll_fbd); > > + > > + /* > > + * Only rewrite when needed (new value or disabled), since rewriting > > + * triggers another format change event. > > + */ > > + if ((pllctl0 != pllctl0_new) || > > + ((pllctl1 & PLLCTL1_PLL_EN_MASK) == 0)) { > > + u16 pllctl1_mask = PLLCTL1_PLL_FRS_MASK | PLLCTL1_RESETB_MASK | > > + PLLCTL1_PLL_EN_MASK; > > + u16 pllctl1_val = PLLCTL1_PLL_FRS_SET(pll_frs) | > > + PLLCTL1_RESETB_MASK | PLLCTL1_PLL_EN_MASK; > > + > > + v4l2_dbg(1, debug, sd, "Updating PLL clock\n"); > > + i2c_wr16(sd, PLLCTL0, pllctl0_new); > > + i2c_wr16_and_or(sd, PLLCTL1, pllctl1_mask, pllctl1_val); > > + udelay(1000); > > + i2c_wr16_and_or(sd, PLLCTL1, PLLCTL1_CKEN_MASK, > > + PLLCTL1_CKEN_MASK); > > + } > > + > > + tc358746_dump_pll(sd, state); > > +} > > + > > +static void tc358746_set_csi_color_space(struct v4l2_subdev *sd) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + const struct tc358746_mbus_fmt *tc358746_fmt = > > + tc358746_get_format(state->fmt.code); > > + > > + /* currently no self defined csi user data type id's are supported */ > > + mutex_lock(&state->confctl_mutex); > > + i2c_wr16_and_or(sd, DATAFMT, > > + (DATAFMT_PDFMT_MASK | DATAFMT_UDT_EN_MASK), > > + DATAFMT_PDFMT_SET(tc358746_fmt->pdformat)); > > + i2c_wr16_and_or(sd, CONFCTL, CONFCTL_PDATAF_MASK, > > + CONFCTL_PDATAF_SET(tc358746_fmt->pdataf)); > > + mutex_unlock(&state->confctl_mutex); > > +} > > + > > +static void tc38764_debug_pattern_80(struct v4l2_subdev *sd) > > +{ > > + unsigned int i; > > + > > + i2c_wr16(sd, DBG_ACT_LINE_CNT, 0x8000); > > + i2c_wr16(sd, DBG_LINE_WIDTH, 0x0396); > > + i2c_wr16(sd, DBG_VERT_BLANK_LINE_CNT, 0x0000); > > + > > + for (i = 0; i < 80; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0xff7f); > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0xff00); > > + for (i = 0; i < 40; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0xffff); > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0xc0ff); > > + for (i = 0; i < 40; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0xc000); > > + for (i = 0; i < 80; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x7f00); > > + for (i = 0; i < 80; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x7fff); > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x0000); > > + for (i = 0; i < 40; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x00ff); > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x00ff); > > + for (i = 0; i < 40; i++) > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x0000); > > + i2c_wr16(sd, DBG_VIDEO_DATA, 0x007f); > > + > > + i2c_wr16(sd, DBG_ACT_LINE_CNT, 0xC1DF); > > +} > > + > > +static void tc358746_enable_csi_lanes(struct v4l2_subdev *sd, int enable) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct tc358746_csi_param *csi_setting = > > + tc358746_g_cur_csi_settings(state); > > + unsigned int lanes = csi_setting->lane_num; > > + u32 val = 0; > > + > > + if (lanes < 1 || !enable) > > + i2c_wr32(sd, CLW_CNTRL, CLW_CNTRL_CLW_LANEDISABLE_MASK); > > + if (lanes < 1 || !enable) > > + i2c_wr32(sd, D0W_CNTRL, D0W_CNTRL_D0W_LANEDISABLE_MASK); > > Please put the two in the same basic block; no need for two conditions that > are the same. > > > + if (lanes < 2 || !enable) > > + i2c_wr32(sd, D1W_CNTRL, D1W_CNTRL_D1W_LANEDISABLE_MASK); > > + if (lanes < 3 || !enable) > > + i2c_wr32(sd, D2W_CNTRL, D2W_CNTRL_D2W_LANEDISABLE_MASK); > > + if (lanes < 4 || !enable) > > + i2c_wr32(sd, D3W_CNTRL, D2W_CNTRL_D3W_LANEDISABLE_MASK); > > + > > + if (lanes > 0 && enable) > > Isn't lanes always greater than 0? Sure.. changed this and above comment. > > + val |= HSTXVREGEN_CLM_HSTXVREGEN_MASK | > > + HSTXVREGEN_D0M_HSTXVREGEN_MASK; > > + if (lanes > 1 && enable) > > + val |= HSTXVREGEN_D1M_HSTXVREGEN_MASK; > > + if (lanes > 2 && enable) > > + val |= HSTXVREGEN_D2M_HSTXVREGEN_MASK; > > + if (lanes > 3 && enable) > > + val |= HSTXVREGEN_D3M_HSTXVREGEN_MASK; > > + > > + i2c_wr32(sd, HSTXVREGEN, val); > > +} > > + > > +static void tc358746_set_csi(struct v4l2_subdev *sd) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct tc358746_csi_param *csi_setting = > > + tc358746_g_cur_csi_settings(state); > > + bool en_continuous_clk = csi_setting->is_continuous_clk; > > + u32 val; > > + > > + val = TCLK_HEADERCNT_TCLK_ZEROCNT_SET(csi_setting->tclk_zerocnt) | > > + TCLK_HEADERCNT_TCLK_PREPARECNT_SET(csi_setting->tclk_preparecnt); > > + i2c_wr32(sd, TCLK_HEADERCNT, val); > > + val = THS_HEADERCNT_THS_ZEROCNT_SET(csi_setting->ths_zerocnt) | > > + THS_HEADERCNT_THS_PREPARECNT_SET(csi_setting->ths_preparecnt); > > + i2c_wr32(sd, THS_HEADERCNT, val); > > + i2c_wr32(sd, TWAKEUP, csi_setting->twakeupcnt); > > + i2c_wr32(sd, TCLK_POSTCNT, csi_setting->tclk_postcnt); > > + i2c_wr32(sd, THS_TRAILCNT, csi_setting->ths_trailcnt); > > + i2c_wr32(sd, LINEINITCNT, csi_setting->lineinitcnt); > > + i2c_wr32(sd, LPTXTIMECNT, csi_setting->lptxtimecnt); > > + i2c_wr32(sd, TCLK_TRAILCNT, csi_setting->tclk_trailcnt); > > + i2c_wr32(sd, TXOPTIONCNTRL, > > + en_continuous_clk ? TXOPTIONCNTRL_CONTCLKMODE_MASK : 0); > > + > > + if (state->test) > > + tc38764_debug_pattern_80(sd); > > + > > + tc358746_dump_csi(sd, csi_setting); > > +} > > + > > +static void tc358746_enable_csi_module(struct v4l2_subdev *sd, int enable) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct tc358746_csi_param *csi_setting = > > + tc358746_g_cur_csi_settings(state); > > + unsigned int lanes = csi_setting->lane_num; > > + u32 val; > > + > > + if (!enable) > > + return; > > + > > + i2c_wr32(sd, STARTCNTRL, STARTCNTRL_START_MASK); > > + i2c_wr32(sd, CSI_START, CSI_START_STRT_MASK); > > + > > + val = CSI_CONTROL_NOL_1_MASK; > > + if (lanes == 2) > > + val = CSI_CONTROL_NOL_2_MASK; > > + else if (lanes == 3) > > + val = CSI_CONTROL_NOL_3_MASK; > > + else if (lanes == 4) > > + val = CSI_CONTROL_NOL_4_MASK; > > + > > + val |= CSI_CONTROL_CSI_MODE_MASK | CSI_CONTROL_TXHSMD_MASK; > > + tc358746_wr_csi_control(sd, val); > > +} > > + > > +static void tc358746_set_buffers(struct v4l2_subdev *sd) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + const struct tc358746_mbus_fmt *tc358746_mbusfmt = > > + tc358746_get_format(state->fmt.code); > > + unsigned int byte_per_line = > > + (state->fmt.width * tc358746_mbusfmt->bpp) / 8; > > + > > + i2c_wr16(sd, FIFOCTL, state->vb_fifo); > > + i2c_wr16(sd, WORDCNT, byte_per_line); > > + v4l2_dbg(1, debug, sd, "FIFOCTL 0x%02x: WORDCNT 0x%02x\n", > > + state->vb_fifo, byte_per_line); > > +} > > + > > +/* --------------- CORE OPS --------------- */ > > + > > +static int tc358746_log_status(struct v4l2_subdev *sd) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + uint16_t sysctl = i2c_rd16(sd, SYSCTL); > > + > > + v4l2_info(sd, "-----Chip status-----\n"); > > + v4l2_info(sd, "Chip ID: 0x%02lx\n", > > + (i2c_rd16(sd, CHIPID) & CHIPID_CHIPID_MASK) >> 8); > > + v4l2_info(sd, "Chip revision: 0x%02lx\n", > > + i2c_rd16(sd, CHIPID) & CHIPID_REVID_MASK); > > + v4l2_info(sd, "Sleep mode: %s\n", sysctl & SYSCTL_SLEEP_MASK ? > > + "on" : "off"); > > + > > + v4l2_info(sd, "-----CSI-TX status-----\n"); > > + v4l2_info(sd, "Waiting for particular sync signal: %s\n", > > + (i2c_rd16(sd, CSI_STATUS) & CSI_STATUS_S_WSYNC_MASK) ? > > + "yes" : "no"); > > + v4l2_info(sd, "Transmit mode: %s\n", > > + (i2c_rd16(sd, CSI_STATUS) & CSI_STATUS_S_TXACT_MASK) ? > > + "yes" : "no"); > > + v4l2_info(sd, "Stopped: %s\n", > > + (i2c_rd16(sd, CSI_STATUS) & CSI_STATUS_S_HLT_MASK) ? > > + "yes" : "no"); > > + v4l2_info(sd, "Color space: %s\n", > > + state->fmt.code == MEDIA_BUS_FMT_UYVY8_2X8 ? > > + "YCbCr 422 8-bit" : "Unsupported"); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_VIDEO_ADV_DEBUG > > +static void tc358746_print_register_map(struct v4l2_subdev *sd) > > +{ > > + v4l2_info(sd, "0x0000-0x0050: Global Register\n"); > > + v4l2_info(sd, "0x0056-0x0070: Rx Control Registers\n"); > > + v4l2_info(sd, "0x0080-0x00F8: Rx Status Registers\n"); > > + v4l2_info(sd, "0x0100-0x0150: Tx D-PHY Register\n"); > > + v4l2_info(sd, "0x0204-0x0238: Tx PPI Register\n"); > > + v4l2_info(sd, "0x040c-0x0518: Tx Control Register\n"); > > +} > > + > > +static int tc358746_get_reg_size(u16 address) > > +{ > > + if (address <= 0x00ff) > > + return 2; > > + else if ((address >= 0x0100) && (address <= 0x05FF)) > > + return 4; > > + else > > + return 1; > > +} > > + > > +static int tc358746_g_register(struct v4l2_subdev *sd, > > + struct v4l2_dbg_register *reg) > > +{ > > + if (reg->reg > 0xffff) { > > + tc358746_print_register_map(sd); > > + return -EINVAL; > > + } > > + > > + reg->size = tc358746_get_reg_size(reg->reg); > > + > > + reg->val = i2c_rdreg(sd, reg->reg, reg->size); > > + > > + return 0; > > +} > > + > > +static int tc358746_s_register(struct v4l2_subdev *sd, > > + const struct v4l2_dbg_register *reg) > > +{ > > + if (reg->reg > 0xffff) { > > + tc358746_print_register_map(sd); > > + return -EINVAL; > > + } > > + > > + i2c_wrreg(sd, (u16)reg->reg, reg->val, > > + tc358746_get_reg_size(reg->reg)); > > + > > + return 0; > > +} > > +#endif > > + > > +/* --------------- video ops --------------- */ > > + > > +static int tc358746_s_power(struct v4l2_subdev *sd, int on) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + > > + /* > > + * REF_01: > > + * Softreset don't reset configuration registers content but is needed > > "doesn't" > > > + * during power-on to trigger a csi LP-11 state change and during > > + * power-off to disable the csi-module. > > + */ > > + tc358746_sreset(sd); > > + > > + if (state->fmt_changed) { > > + tc358746_set_buffers(sd); > > + tc358746_set_csi(sd); > > + tc358746_set_csi_color_space(sd); > > + > > + /* as recommend in REF_01 */ > > + tc358746_sleep_mode(sd, 1); > > + tc358746_set_pll(sd); > > + tc358746_sleep_mode(sd, 0); > > + > > + state->fmt_changed = false; > > + } > > + > > + tc358746_enable_csi_lanes(sd, on); > > + tc358746_enable_csi_module(sd, on); > > + tc358746_sleep_mode(sd, !on); > > + > > + return 0; > > +} > > + > > +static int tc358746_s_stream(struct v4l2_subdev *sd, int enable) > > +{ > > + tc358746_enable_stream(sd, enable); > > Could you use tc358746_enable_stream() directly as the s_stream op? Of course, added it for naming consistency since the enable_stream() is a internal function and I didn't wanted to mix those. > Note that you need to call the upstream sub-device's s_stream op from here > as well. I tought this is done by the host driver trough iterating over the whole graph? > > + > > + return 0; > > +} > > + > > +/* --------------- pad ops --------------- */ > > + > > +static int tc358746_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + if (code->index >= ARRAY_SIZE(tc358746_formats)) > > + return -EINVAL; > > + > > + code->code = tc358746_formats[code->index].code; > > + > > + return 0; > > +} > > + > > +static struct v4l2_mbus_framefmt * > > +__tc358746_get_pad_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, u32 which) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_format(sd, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &state->fmt; > > + default: > > + return NULL; > > + } > > +} > > + > > +static int tc358746_get_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + > > + if (format->pad != 0 && format->pad != 1) > > + return -EINVAL; > > + > > + format->format.code = state->fmt.code; > > + format->format.width = state->fmt.width; > > + format->format.height = state->fmt.height; > > + format->format.field = state->fmt.field; > > + > > + return 0; > > +} > > + > > +static int tc358746_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + struct media_pad *pad = &state->pads[format->pad]; > > + struct v4l2_mbus_framefmt *mbusformat; > > + const struct tc358746_mbus_fmt *tc358746_mbusformat; > > + unsigned int pclk, hblank; > > + unsigned int new_freq, cur_freq = v4l2_ctrl_g_ctrl(state->link_freq); > > + u16 vb_fifo; > > + > > + if (pad->flags == MEDIA_PAD_FL_SOURCE) > > + return tc358746_get_fmt(sd, cfg, format); > > + > > + mbusformat = __tc358746_get_pad_format(sd, cfg, format->pad, > > + format->which); > > + if (!mbusformat) > > + return -EINVAL; > > + > > + tc358746_mbusformat = tc358746_get_format(format->format.code); > > + if (!tc358746_mbusformat) { > > + format->format.code = tc358746_def_fmt.code; > > + tc358746_mbusformat = tc358746_get_format(format->format.code); > > + } > > + > > + /* > > + * Some sensors change their hblank and pclk value on different formats, > > + * so we need to request it again. > > + */ > > + pclk = v4l2_ctrl_g_ctrl_int64(state->sensor_pclk_ctrl); > > + if (pclk != state->pclk) { > > + v4l2_dbg(1, debug, sd, "Update pclk %u -> %u\n", > > + state->pclk, pclk); > > + state->pclk = pclk; > > + } > > + > > + hblank = v4l2_ctrl_g_ctrl(state->sensor_hblank_ctrl); > > + if (hblank != state->hblank) { > > + v4l2_dbg(1, debug, sd, "Update hblank %u -> %u\n", > > + state->hblank, hblank); > > + state->hblank = hblank; > > + } > > + > > + /* > > + * Normaly the HW has no size limitations but we have to check if the > > + * csi timings are valid for this size. The timings can be adjust by the > > + * fifo size. If this doesn't work we have to do this check again with a > > + * other csi link frequency if it is possible. > > + */ > > + new_freq = tc358746_adjust_timings(state, tc358746_mbusformat, > > + &format->format.width, &vb_fifo); > > + > > + /* Currently only a few YUV based formats are supported */ > > + if (tc358746_format_supported(format->format.code)) > > + format->format.code = MEDIA_BUS_FMT_UYVY8_2X8; > > + > > + /* Currently only non interleaved images are supported */ > > + format->format.field = V4L2_FIELD_NONE; > > + > > + *mbusformat = format->format; > > + > > + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > + state->fmt_changed = true; > > + state->vb_fifo = vb_fifo; > > + if (new_freq != cur_freq) > > + v4l2_ctrl_s_ctrl(state->link_freq, new_freq); > > + } > > + > > + return 0; > > +} > > + > > +static int > > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link, > > + struct v4l2_subdev_format *source_fmt, > > + struct v4l2_subdev_format *sink_fmt) > > +{ > > + struct tc358746_state *state = to_state(sd); > > + const struct tc358746_mbus_fmt *tc358746_mbusformat; > > + unsigned int pclk, pclk_old = state->pclk; > > + unsigned int hblank, hblank_old = state->hblank; > > + int new_freq; > > + u16 vb_fifo; > > + > > + /* > > + * Only validate if the timings are changed, after the link was already > > + * initialized. This can be happen if the parallel sensor frame interval > > + * is changed. Format checks are perfomed by the common code. > > + */ > > + > > + tc358746_mbusformat = tc358746_get_format(sink_fmt->format.code); > > + if (!tc358746_mbusformat) > > + return -EINVAL; /* Format was changed too and is invalid */ > > + > > + pclk = v4l2_ctrl_g_ctrl_int64(state->sensor_pclk_ctrl); > > + if (pclk != state->pclk) > > + state->pclk = pclk; > > + > > + hblank = v4l2_ctrl_g_ctrl(state->sensor_hblank_ctrl); > > + if (hblank != state->hblank) > > + state->hblank = hblank; > > + > > + new_freq = tc358746_adjust_timings(state, tc358746_mbusformat, > > + &source_fmt->format.width, &vb_fifo); > > + > > + if (new_freq != v4l2_ctrl_g_ctrl(state->link_freq)) { > > + /* > > + * This can lead into undefined behaviour, so we don't support > > + * dynamic changes due to a to late re-configuration. > > + */ > > + state->pclk = pclk_old; > > + state->hblank = hblank_old; > > + > > + return -EINVAL; > > + } > > + > > + state->fmt_changed = true; > > + state->vb_fifo = vb_fifo; > > + > > + return 0; > > +} > > + > > +static int tc358764_s_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct tc358746_state *state = container_of(ctrl->handler, > > + struct tc358746_state, hdl); > > + struct v4l2_subdev *sd = &state->sd; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_LINK_FREQ: > > + v4l2_info(sd, "Update link-frequency %llu -> %llu\n", > > + state->link_frequencies[ctrl->cur.val], > > + state->link_frequencies[ctrl->val]); > > + > > + return 0; > > + case V4L2_CID_TEST_PATTERN: > > + state->test = ctrl->val; > > + return 0; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int tc358746_link_setup(struct media_entity *entity, > > + const struct media_pad *local, > > + const struct media_pad *remote, u32 flags) > > +{ > > + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); > > + struct v4l2_subdev *ps_sd = media_entity_to_v4l2_subdev(remote->entity); > > + struct tc358746_state *state = to_state(sd); > > + struct v4l2_ctrl *ctrl; > > + > > + /* no special requirements on source pads */ > > + if (local->flags & MEDIA_PAD_FL_SOURCE) > > + return 0; > > + > > + v4l2_dbg(1, debug, sd, "link setup '%s':%d->'%s':%d[%d]", > > + remote->entity->name, remote->index, local->entity->name, > > + local->index, flags & MEDIA_LNK_FL_ENABLED); > > + > > + /* > > + * The remote parallel sensor must support pixel rate and hblank query > > + */ > > + ctrl = v4l2_ctrl_find(ps_sd->ctrl_handler, V4L2_CID_PIXEL_RATE); > > + if (!ctrl) { > > + v4l2_err(sd, "Subdev %s must support V4L2_CID_PIXEL_RATE\n", > > + ps_sd->name); > > + return -EINVAL; > > + } > > + state->pclk = v4l2_ctrl_g_ctrl_int64(ctrl); > > + state->sensor_pclk_ctrl = ctrl; > > + > > + ctrl = v4l2_ctrl_find(ps_sd->ctrl_handler, V4L2_CID_HBLANK); > > + if (!ctrl) { > > + v4l2_err(sd, "Subdev %s must support V4L2_CID_HBLANK\n", > > + ps_sd->name); > > + return -EINVAL; > > + } > > + state->hblank = v4l2_ctrl_g_ctrl(ctrl); > > + state->sensor_hblank_ctrl = ctrl; > > + > > + return 0; > > +} > > + > > +/* -------------------------------------------------------------------------- */ > > + > > +static const struct v4l2_ctrl_ops tc358764_ctrl_ops = { > > + .s_ctrl = tc358764_s_ctrl, > > +}; > > + > > +static const struct v4l2_subdev_core_ops tc358746_core_ops = { > > + .log_status = tc358746_log_status, > > +#ifdef CONFIG_VIDEO_ADV_DEBUG > > + .g_register = tc358746_g_register, > > + .s_register = tc358746_s_register, > > +#endif > > + .s_power = tc358746_s_power, > > +}; > > + > > +static const struct v4l2_subdev_video_ops tc358746_video_ops = { > > + .s_stream = tc358746_s_stream, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops tc358746_pad_ops = { > > + .enum_mbus_code = tc358746_enum_mbus_code, > > + .set_fmt = tc358746_set_fmt, > > + .get_fmt = tc358746_get_fmt, > > + .link_validate = tc358746_link_validate, > > +}; > > + > > +static const struct v4l2_subdev_ops tc358746_ops = { > > + .core = &tc358746_core_ops, > > + .video = &tc358746_video_ops, > > + .pad = &tc358746_pad_ops, > > +}; > > + > > +static const struct media_entity_operations tc358746_entity_ops = { > > + .link_setup = &tc358746_link_setup, > > + .link_validate = &v4l2_subdev_link_validate, > > +}; > > + > > +/* --------------- PROBE / REMOVE --------------- */ > > + > > +static int tc358746_set_lane_settings(struct tc358746_state *state, > > + struct v4l2_fwnode_endpoint *fw) > > +{ > > + struct v4l2_subdev *sd = &state->sd; > > + int i; > > unsigned int ? > > > + > > + for (i = 0; i < fw->nr_of_link_frequencies; i++) { > > + struct tc358746_csi_param *s = > > + &state->link_freq_settings[i]; > > + u32 bps_pr_lane; > > + > > + state->link_frequencies[i] = fw->link_frequencies[i]; > > + > > + /* > > + * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. > > + * bps_pr_lane = 2 * link_freq, because MIPI data lane is double > > + * data rate. > > + */ > > + bps_pr_lane = 2 * fw->link_frequencies[i]; > > + if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { > > + v4l2_err(sd, "unsupported bps per lane: %u bps\n", > > + bps_pr_lane); > > + return -EINVAL; > > + } > > + > > + if (bps_pr_lane > 500000000) > > + s->speed_range = 0; > > + else if (bps_pr_lane > 250000000) > > + s->speed_range = 1; > > + else if (bps_pr_lane > 125000000) > > + s->speed_range = 2; > > + else > > + s->speed_range = 3; > > + > > + s->unit_clk_hz = state->pllinclk_hz >> s->speed_range; > > + s->unit_clk_mul = bps_pr_lane / s->unit_clk_hz; > > + s->speed_per_lane = bps_pr_lane; > > + s->lane_num = fw->bus.mipi_csi2.num_data_lanes; > > + s->is_continuous_clk = fw->bus.mipi_csi2.flags & > > + V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; > > + > > + if (s->speed_per_lane != 432000000U) > > + v4l2_warn(sd, "untested bps per lane: %u bps\n", > > + s->speed_per_lane); > > + > > + v4l2_dbg(2, debug, sd, "lane setting %d\n", i); > > + v4l2_dbg(2, debug, sd, > > + "unit_clk %uHz: unit_clk_mul %u: speed_range %u: speed_per_lane(bps/lane) %u: csi_lange_numbers %u\n", > > + s->unit_clk_hz, s->unit_clk_mul, s->speed_range, > > + s->speed_per_lane, s->lane_num); > > + } > > + > > + state->link_frequencies_num = fw->nr_of_link_frequencies; > > + > > + return 0; > > +} > > + > > +static void tc358746_gpio_reset(struct tc358746_state *state) > > +{ > > + usleep_range(5000, 10000); > > + gpiod_set_value(state->reset_gpio, 1); > > + usleep_range(1000, 2000); > > + gpiod_set_value(state->reset_gpio, 0); > > + msleep(20); > > +} > > + > > +static int tc358746_apply_fw(struct tc358746_state *state) > > +{ > > + struct v4l2_subdev *sd = &state->sd; > > + struct tc358746_csi_param *csi_setting; > > + int err, i; > > unsigned int i Yes. > > + > > + for (i = 0; i < state->link_frequencies_num; i++) { > > + csi_setting = &state->link_freq_settings[i]; > > + > > + err = tc358746_calculate_csi_txtimings(state, csi_setting); > > + if (err) { > > + v4l2_err(sd, "Failed to calc csi-tx tminings\n"); > > + return err; > > + } > > + } > > + > > + /* > > + * Set it to the hw default value. The correct value will be set during > > + * set_fmt(), since it depends on the pclk and and the resulution. > > + */ > > + state->vb_fifo = 1; > > + > > + err = clk_prepare_enable(state->refclk); > > + if (err) { > > + v4l2_err(sd, "Failed to enable clock\n"); > > + return err; > > + } > > Is there a need to keep the clock running even if the device is not > streaming? Please consider adding runtime PM support. That's not strictly > needed for the patch to be merged though IMO. Thats a good point. The Chip can act as clk-provider fo rother devices. So I would probably say yes. > > + > > + if (state->reset_gpio) > > + tc358746_gpio_reset(state); > > + > > + return 0; > > +} > > + > > +static int tc358746_probe_fw(struct tc358746_state *state) > > +{ > > + struct device *dev = &state->i2c_client->dev; > > + struct v4l2_subdev *sd = &state->sd; > > + struct v4l2_fwnode_endpoint endpoint = { > > + .bus_type = V4L2_MBUS_CSI2_DPHY, > > + }; > > + struct fwnode_handle *fw_node; > > + unsigned int refclk, pllinclk; > > + unsigned char pll_prediv; > > + int ret = -EINVAL; > > ret is always assigned elsewhere; no need to initialise. > > > + > > + /* Parse all clocks */ > > + state->refclk = devm_clk_get(dev, NULL); > > + if (IS_ERR(state->refclk)) { > > + if (PTR_ERR(state->refclk) != -EPROBE_DEFER) > > + v4l2_err(sd, "failed to get refclk: %ld\n", > > + PTR_ERR(state->refclk)); > > + return PTR_ERR(state->refclk); > > + } > > + > > + refclk = clk_get_rate(state->refclk); > > + if (refclk < 6000000 || refclk > 40000000) { > > + v4l2_err(sd, "Invalid refclk %u, valid range: 6-40 MHz\n", > > + refclk); > > + return -EINVAL; > > + } > > + > > + /* > > + * The PLL input clock is obtained by dividing refclk by pll_prd. > > + * It must be between 4 MHz and 40 MHz, lower frequency is better. > > + */ > > + pll_prediv = DIV_ROUND_CLOSEST(refclk, 4000000); > > + if (pll_prediv < 1 || pll_prediv > 16) { > > + v4l2_err(sd, "Invalid pll pre-divider value: %d\n", pll_prediv); > > + return -EINVAL; > > + } > > + state->pll_prd = pll_prediv; > > + > > + pllinclk = DIV_ROUND_CLOSEST(refclk, pll_prediv); > > + if (pllinclk < 4000000 || pllinclk > 40000000) { > > + v4l2_err(sd, "Invalid pll input clock: %d Hz\n", pllinclk); > > + return -EINVAL; > > + } > > + state->pllinclk_hz = pllinclk; > > + > > + /* Now parse the fw-node */ > > + fwnode_graph_for_each_endpoint(dev_fwnode(dev), fw_node) { > > + struct fwnode_endpoint fw_ep; > > + > > + ret = fwnode_graph_parse_endpoint(fw_node, &fw_ep); > > + if (ret) > > + return -EINVAL; > > + > > + /* Get downstream endpoint */ > > + if (fw_ep.port == 1) > > + break; > > You could use fwnode_graph_get_endpoint_by_id() instead of the loop. Of course. > > + } > > + > > + if (!fw_node) { > > + v4l2_err(sd, "Missing endpoint node\n"); > > + return -EINVAL; > > + } > > + > > + ret = v4l2_fwnode_endpoint_alloc_parse(fw_node, &endpoint); > > + if (ret) { > > + v4l2_err(sd, "Failed to parse endpoint %d\n", ret); > > + return ret; > > + } > > + > > + state->csi_dir = TC358746_CSI_TX; > > + > > + if (endpoint.bus.mipi_csi2.num_data_lanes == 0 || > > + endpoint.nr_of_link_frequencies == 0) { > > + v4l2_err(sd, "Missing CSI-2 properties in endpoint\n"); > > + ret = -EINVAL; > > + goto free_ep; > > + } > > + > > + if (endpoint.bus.mipi_csi2.num_data_lanes > 4) { > > + v4l2_err(sd, "Invalid number of lanes\n"); > > + ret = -EINVAL; > > + goto free_ep; > > + } > > + > > + state->link_freq_settings = > > + devm_kcalloc(dev, endpoint.nr_of_link_frequencies, > > + sizeof(*state->link_freq_settings), GFP_KERNEL); > > + if (!state->link_freq_settings) { > > + ret = -ENOMEM; > > + goto free_ep; > > + } > > + > > + state->link_frequencies = > > + devm_kcalloc(dev, endpoint.nr_of_link_frequencies, > > + sizeof(*state->link_frequencies), GFP_KERNEL); > > + if (!state->link_frequencies) { > > + ret = -ENOMEM; > > + goto free_ep; > > + } > > + > > + ret = tc358746_set_lane_settings(state, &endpoint); > > + if (ret) > > + goto free_ep; > > + > > + state->reset_gpio = devm_gpiod_get_optional(dev, "reset", > > + GPIOD_OUT_LOW); > > + if (IS_ERR(state->reset_gpio)) { > > + v4l2_err(sd, "failed to get reset gpio\n"); > > + ret = PTR_ERR(state->reset_gpio); > > + goto free_ep; > > + } > > + > > + ret = 0; > > + > > +free_ep: > > + v4l2_fwnode_endpoint_free(&endpoint); > > + return ret; > > +} > > + > > +static int tc358746_parse_endpoint(struct device *dev, > > + struct v4l2_fwnode_endpoint *vep, > > + struct v4l2_async_subdev *asd) > > +{ > > + struct v4l2_subdev *sd = dev_get_drvdata(dev); > > + struct tc358746_state *state = to_state(sd); > > + > > + if (!fwnode_device_is_available(asd->match.fwnode)) { > > + v4l2_err(sd, "remote is not available\n"); > > + return -ENOTCONN; > > + } > > + > > + if (state->csi_dir == TC358746_CSI_TX && > > + vep->bus_type != V4L2_MBUS_PARALLEL) { > > + v4l2_err(sd, "invalid bus type, must be PARALLEL\n"); > > + return -ENOTCONN; > > + } > > + > > + return 0; > > +}; > > + > > +static int tc358746_async_register(struct v4l2_subdev *sd) > > +{ > > + unsigned int port = 0; > > + > > + return v4l2_async_register_fwnode_subdev( > > + sd, sizeof(struct v4l2_async_subdev), &port, 1, > > + tc358746_parse_endpoint); > > Please move this to the caller instead. Okay. > > + > > +} > > + > > +static const char * const tc358764_test_pattern_menu[] = { > > + "Disabled", > > + "80 Pixel Color Bars", > > +}; > > + > > +static int tc358746_probe(struct i2c_client *client) > > +{ > > + struct tc358746_state *state; > > + struct v4l2_subdev *sd; > > + int err; > > + > > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > > + return -EIO; > > + > > + state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); > > + if (!state) > > + return -ENOMEM; > > + > > + state->i2c_client = client; > > You can use v4l2_get_subdevdata() to obtain the I²C client; no need to > store it separately. Yes, your're right. I change that. > > + sd = &state->sd; > > + v4l2_i2c_subdev_init(sd, client, &tc358746_ops); > > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + > > + err = tc358746_probe_fw(state); > > + if (err) > > + return err; > > + > > + err = tc358746_apply_fw(state); > > + if (err) > > + return err; > > + > > + if (((i2c_rd16(sd, CHIPID) & CHIPID_CHIPID_MASK) >> 8) != 0x44) { > > + v4l2_info(sd, "not a TC358746 on address 0x%x\n", > > + client->addr << 1); > > + err = -ENODEV; > > + goto err_clk; > > + } > > + > > + v4l2_ctrl_handler_init(&state->hdl, 2); > > + > > + v4l2_ctrl_new_std_menu_items(&state->hdl, > > + &tc358764_ctrl_ops, V4L2_CID_TEST_PATTERN, > > + ARRAY_SIZE(tc358764_test_pattern_menu) - 1, 0, 0, > > + tc358764_test_pattern_menu); > > + > > + state->link_freq = > > + v4l2_ctrl_new_int_menu(&state->hdl, &tc358764_ctrl_ops, > > + V4L2_CID_LINK_FREQ, > > + state->link_frequencies_num - 1, > > + TC358746_DEF_LINK_FREQ, > > + state->link_frequencies); > > + > > + > > + sd->ctrl_handler = &state->hdl; > > + if (state->hdl.error) { > > + err = state->hdl.error; > > + goto err_hdl; > > + } > > + > > + state->pads[0].flags = MEDIA_PAD_FL_SINK; > > + state->pads[1].flags = MEDIA_PAD_FL_SOURCE; > > + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; > > + sd->entity.ops = &tc358746_entity_ops; > > + err = media_entity_pads_init(&sd->entity, 2, state->pads); > > + if (err < 0) > > + goto err_hdl; > > + > > + mutex_init(&state->confctl_mutex); > > + > > + state->fmt = tc358746_def_fmt; > > + > > + /* Apply default settings */ > > + tc358746_sreset(sd); > > + tc358746_set_buffers(sd); > > + tc358746_set_csi(sd); > > + tc358746_set_csi_color_space(sd); > > + tc358746_sleep_mode(sd, 1); > > + tc358746_set_pll(sd); > > + tc358746_enable_stream(sd, 0); > > + > > + err = tc358746_async_register(sd); > > + if (err < 0) > > + goto err_mutex; > > + > > + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, > > + client->addr << 1, client->adapter->name); > > + > > + return 0; > > + > > +err_mutex: > > + mutex_destroy(&state->confctl_mutex); > > +err_hdl: > > + media_entity_cleanup(&sd->entity); > > + v4l2_ctrl_handler_free(&state->hdl); > > +err_clk: > > + clk_disable_unprepare(state->refclk); > > + > > + return err; > > +} > > + > > +static int tc358746_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct tc358746_state *state = to_state(sd); > > + > > + v4l2_async_unregister_subdev(sd); > > + v4l2_device_unregister_subdev(sd); > > + mutex_destroy(&state->confctl_mutex); > > + media_entity_cleanup(&sd->entity); > > + v4l2_ctrl_handler_free(&state->hdl); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id __maybe_unused tc358746_of_match[] = { > > + { .compatible = "toshiba,tc358746" }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, tc358746_of_match); > > + > > +static struct i2c_driver tc358746_driver = { > > + .driver = { > > + .name = "tc358746", > > + .of_match_table = of_match_ptr(tc358746_of_match), > > No need for of_patch_ptr() here. Okay. Thanks for the review =) Regards, Marco > > > + }, > > + .probe_new = tc358746_probe, > > + .remove = tc358746_remove, > > +}; > > + > > +module_i2c_driver(tc358746_driver); > > diff --git a/drivers/media/i2c/tc358746_regs.h b/drivers/media/i2c/tc358746_regs.h > > new file mode 100644 > > index 000000000000..9232d00d0e92 > > --- /dev/null > > +++ b/drivers/media/i2c/tc358746_regs.h > > @@ -0,0 +1,208 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * tc358746 - Toshiba Parallel to CSI-2 bridge - register names and bit masks > > + * > > + * Convention: > > + * > > + * __MASK > > + * __ > > + * __SET(val = __) > > + * > > + * References: > > + * REF_01: > > + * - TC358746AXBG/TC358748XBG/TC358748IXBG Functional Specification Rev 1.2 > > + */ > > + > > +#ifndef __TC358746_REGS_H > > +#define __TC358746_REGS_H > > + > > +#define CHIPID 0x0000 > > +#define CHIPID_CHIPID_MASK GENMASK(15, 8) > > +#define CHIPID_REVID_MASK GENMASK(7, 0) > > + > > +#define SYSCTL 0x0002 > > +#define SYSCTL_SLEEP_MASK BIT(1) > > +#define SYSCTL_SRESET_MASK BIT(0) > > + > > +#define CONFCTL 0x0004 > > +#define CONFCTL_TRIEN_MASK BIT(15) > > +#define CONFCTL_INTE2N_MASK BIT(13) > > +#define CONFCTL_BT656EN_MASK BIT(12) > > +#define CONFCTL_PDATAF_MASK GENMASK(9, 8) > > +#define CONFCTL_PDATAF_SET(val) (((val << 8) & CONFCTL_PDATAF_MASK)) > > +#define CONFCTL_PDATAF_MODE0 0 > > +#define CONFCTL_PDATAF_MODE1 1 > > +#define CONFCTL_PDATAF_MODE2 2 > > +#define CONFCTL_PPEN_MASK BIT(6) > > +#define CONFCTL_VVALIDP_MASK BIT(5) > > +#define CONFCTL_HVALIDP_MASK BIT(4) > > +#define CONFCTL_PCLKP_MASK BIT(3) > > +#define CONFCTL_AUTO_MASK BIT(2) > > +#define CONFCTL_DATALANE_MASK GENMASK(1, 0) > > +#define CONFCTL_DATALANE_1 0 > > +#define CONFCTL_DATALANE_2 1 > > +#define CONFCTL_DATALANE_3 2 > > +#define CONFCTL_DATALANE_4 3 > > + > > +#define FIFOCTL 0x0006 > > +#define DATAFMT 0x0008 > > +#define DATAFMT_PDFMT_RAW8 0 > > +#define DATAFMT_PDFMT_RAW10 1 > > +#define DATAFMT_PDFMT_RAW12 2 > > +#define DATAFMT_PDFMT_RGB888 3 > > +#define DATAFMT_PDFMT_RGB666 4 > > +#define DATAFMT_PDFMT_RGB565 5 > > +#define DATAFMT_PDFMT_YCBCRFMT_422_8_BIT 6 > > +#define DATAFMT_PDFMT_RAW14 8 > > +#define DATAFMT_PDFMT_YCBCRFMT_422_10_BIT 9 > > +#define DATAFMT_PDFMT_YCBCRFMT_444 10 > > +#define DATAFMT_PDFMT_MASK GENMASK(7, 4) > > +#define DATAFMT_PDFMT_SET(val) (((val) << 4) & DATAFMT_PDFMT_MASK) > > +#define DATAFMT_UDT_EN_MASK BIT(0) > > + > > +#define MCLKCTL 0x000c > > +#define MCLKCTL_MCLK_HIGH_MASK GENMASK(15, 8) > > +#define MCLKCTL_MCLK_HIGH_SET(val) ((((val) - 1) << 8) & MCLKCTL_MCLK_HIGH_MASK) > > +#define MCLKCTL_MCLK_LOW_MASK GENMASK(7, 0) > > +#define MCLKCTL_MCLK_LOW_SET(val) (((val) - 1) & MCLKCTL_MCLK_LOW_MASK) > > + > > +#define PLLCTL0 0x0016 > > +#define PLLCTL0_PLL_PRD_MASK GENMASK(15, 12) > > +#define PLLCTL0_PLL_PRD_SET(prd) ((((prd) - 1) << 12) & PLLCTL0_PLL_PRD_MASK) > > +#define PLLCTL0_PLL_FBD_MASK GENMASK(8, 0) > > +#define PLLCTL0_PLL_FBD_SET(fbd) (((fbd) - 1) & PLLCTL0_PLL_FBD_MASK) > > + > > +#define PLLCTL1 0x0018 > > +#define PLLCTL1_PLL_FRS_MASK GENMASK(11, 10) > > +#define PLLCTL1_PLL_FRS_SET(frs) (((frs) << 10) & PLLCTL1_PLL_FRS_MASK) > > +#define PLLCTL1_PLL_LBWS_MASK GENMASK(9, 8) > > +#define PLLCTL1_LFBREN_MASK BIT(6) > > +#define PLLCTL1_BYPCKEN_MASK BIT(5) > > +#define PLLCTL1_CKEN_MASK BIT(4) > > +#define PLLCTL1_RESETB_MASK BIT(1) > > +#define PLLCTL1_PLL_EN_MASK BIT(0) > > + > > +#define CLKCTL 0x0020 > > +#define CLKCTL_MCLKDIV_MASK GENMASK(3, 2) > > +#define CLKCTL_MCLKDIV_SET(val) ((val << 2) & CLKCTL_MCLKDIV_MASK) > > +#define CLKCTL_MCLKDIV_8 0 > > +#define CLKCTL_MCLKDIV_4 1 > > +#define CLKCTL_MCLKDIV_2 2 > > + > > +#define WORDCNT 0x0022 > > +#define PP_MISC 0x0032 > > +#define PP_MISC_FRMSTOP_MASK BIT(15) > > +#define PP_MISC_RSTPTR_MASK BIT(14) > > + > > +#define CSI2TX_DATA_TYPE 0x0050 > > +#define MIPI_PHY_STATUS 0x0062 > > +#define CSI2_ERROR_STATUS 0x0064 > > +#define CSI2_ERR_EN 0x0066 > > +#define CSI2_IDID_ERROR 0x006c > > +#define DBG_ACT_LINE_CNT 0x00e0 > > +#define DBG_LINE_WIDTH 0x00e2 > > +#define DBG_VERT_BLANK_LINE_CNT 0x00e4 > > +#define DBG_VIDEO_DATA 0x00e8 > > +#define FIFOSTATUS 0x00F8 > > + > > +#define CLW_CNTRL 0x0140 > > +#define CLW_CNTRL_CLW_LANEDISABLE_MASK BIT(0) > > + > > +#define D0W_CNTRL 0x0144 > > +#define D0W_CNTRL_D0W_LANEDISABLE_MASK BIT(0) > > + > > +#define D1W_CNTRL 0x0148 > > +#define D1W_CNTRL_D1W_LANEDISABLE_MASK BIT(0) > > + > > +#define D2W_CNTRL 0x014C > > +#define D2W_CNTRL_D2W_LANEDISABLE_MASK BIT(0) > > + > > +#define D3W_CNTRL 0x0150 > > +#define D2W_CNTRL_D3W_LANEDISABLE_MASK BIT(0) > > + > > +#define STARTCNTRL 0x0204 > > +#define STARTCNTRL_START_MASK BIT(0) > > + > > +#define LINEINITCNT 0x0210 > > +#define LPTXTIMECNT 0x0214 > > +#define TCLK_HEADERCNT 0x0218 > > +#define TCLK_HEADERCNT_TCLK_ZEROCNT_MASK GENMASK(15, 8) > > +#define TCLK_HEADERCNT_TCLK_PREPARECNT_MASK GENMASK(6, 0) > > +#define TCLK_HEADERCNT_TCLK_ZEROCNT_SET(val) ((val << 8) & TCLK_HEADERCNT_TCLK_ZEROCNT_MASK) > > +#define TCLK_HEADERCNT_TCLK_PREPARECNT_SET(val) (val & TCLK_HEADERCNT_TCLK_PREPARECNT_MASK) > > + > > +#define TCLK_TRAILCNT 0x021C > > +#define THS_HEADERCNT 0x0220 > > +#define THS_HEADERCNT_THS_ZEROCNT_MASK GENMASK(14, 8) > > +#define THS_HEADERCNT_THS_PREPARECNT_MASK GENMASK(6, 0) > > +#define THS_HEADERCNT_THS_ZEROCNT_SET(val) ((val << 8) & THS_HEADERCNT_THS_ZEROCNT_MASK) > > +#define THS_HEADERCNT_THS_PREPARECNT_SET(val) (val & THS_HEADERCNT_THS_PREPARECNT_MASK) > > + > > +#define TWAKEUP 0x0224 > > +#define TCLK_POSTCNT 0x0228 > > +#define THS_TRAILCNT 0x022C > > +#define HSTXVREGCNT 0x0230 > > +#define HSTXVREGEN 0x0234 > > +#define HSTXVREGEN_D3M_HSTXVREGEN_MASK BIT(4) > > +#define HSTXVREGEN_D2M_HSTXVREGEN_MASK BIT(3) > > +#define HSTXVREGEN_D1M_HSTXVREGEN_MASK BIT(2) > > +#define HSTXVREGEN_D0M_HSTXVREGEN_MASK BIT(1) > > +#define HSTXVREGEN_CLM_HSTXVREGEN_MASK BIT(0) > > + > > +#define TXOPTIONCNTRL 0x0238 > > +#define TXOPTIONCNTRL_CONTCLKMODE_MASK BIT(0) > > + > > +#define CSI_CONTROL 0x040C > > +#define CSI_CONTROL_CSI_MODE_MASK BIT(15) > > +#define CSI_CONTROL_HTXTOEN_MASK BIT(10) > > +#define CSI_CONTROL_TXHSMD_MASK BIT(7) > > +#define CSI_CONTROL_NOL_MASK GENMASK(2, 1) > > +#define CSI_CONTROL_NOL_1_MASK 0 > > +#define CSI_CONTROL_NOL_2_MASK BIT(1) > > +#define CSI_CONTROL_NOL_3_MASK BIT(2) > > +#define CSI_CONTROL_NOL_4_MASK (BIT(1) | BIT(2)) > > +#define CSI_CONTROL_EOTDIS_MASK BIT(0) > > + > > +#define CSI_STATUS 0x0410 > > +#define CSI_STATUS_S_WSYNC_MASK BIT(10) > > +#define CSI_STATUS_S_TXACT_MASK BIT(9) > > +#define CSI_STATUS_S_HLT_MASK BIT(0) > > + > > +#define CSI_INT 0x0414 > > +#define CSI_INT_INTHLT_MASK BIT(3) > > +#define CSI_INT_INTER_MASK BIT(2) > > + > > +#define CSI_INT_ENA 0x0418 > > +#define CSI_INT_ENA_IENHLT_MASK BIT(3) > > +#define CSI_INT_ENA_IENER_MASK BIT(2) > > + > > +#define CSI_ERR 0x044C > > +#define CSI_ERR_INER_MASK BIT(9) > > +#define CSI_ERR_WCER_MASK BIT(8) > > +#define CSI_ERR_QUNK_MASK BIT(4) > > +#define CSI_ERR_TXBRK_MASK BIT(1) > > + > > +#define CSI_ERR_INTENA 0x0450 > > +#define CSI_ERR_HALT 0x0454 > > +#define CSI_CONFW 0x0500 > > +#define CSI_CONFW_MODE_MASK GENMASK(31, 29) > > +#define CSI_CONFW_MODE_SET_MASK (BIT(31) | BIT(29)) > > +#define CSI_CONFW_MODE_CLEAR_MASK (BIT(31) | BIT(30)) > > +#define CSI_CONFW_ADDRESS_MASK GENMASK(28, 24) > > +#define CSI_CONFW_ADDRESS_CSI_CONTROL_MASK (BIT(24) | BIT(25)) > > +#define CSI_CONFW_ADDRESS_CSI_INT_ENA_MASK (BIT(25) | BIT(26)) > > +#define CSI_CONFW_ADDRESS_CSI_ERR_INTENA_MASK (BIT(28) | BIT(26)) > > +#define CSI_CONFW_ADDRESS_CSI_ERR_HALT_MASK (BIT(28) | BIT(26) | BIT(24)) > > +#define CSI_CONFW_DATA_MASK GENMASK(15, 0) > > + > > +#define CSIRESET 0x0504 > > +#define CSIRESET_RESET_CNF_MASK BIT(1) > > +#define CSIRESET_RESET_MODULE_MASK BIT(0) > > + > > +#define CSI_INT_CLR 0x050C > > +#define CSI_INT_CLR_ICRER_MASK BIT(2) > > + > > +#define CSI_START 0x0518 > > +#define CSI_START_STRT_MASK BIT(0) > > + > > +#endif > > -- > Kind regards, > > Sakari Ailus > sakari.ailus@linux.intel.com > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |