From: Marco Felsch <m.felsch@pengutronix.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: mchehab@kernel.org, sakari.ailus@linux.intel.com,
hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
robh+dt@kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, kernel@pengutronix.de,
Jacopo Mondi <jacopo@jmondi.org>
Subject: Re: [PATCH v6 02/13] media: v4l2-fwnode: add v4l2_fwnode_connector
Date: Fri, 9 Aug 2019 09:55:36 +0200 [thread overview]
Message-ID: <20190809075536.pukp444dmb7haoxj@pengutronix.de> (raw)
In-Reply-To: <20190516163632.GO14820@pendragon.ideasonboard.com>
Hi Laurent,
On 19-05-16 19:36, Laurent Pinchart wrote:
> Hi Marco,
>
> Thank you for the patch.
Thanks for the review and sorry for the delayed reply.
> On Mon, Apr 15, 2019 at 02:44:02PM +0200, Marco Felsch wrote:
> > Currently every driver needs to parse the connector endpoints by it self.
>
> s/it self/itself/
>
> > This is the initial work to make this generic. The generic connector has
> > some common fields and some connector specific parts. The generic one
> > includes:
> > - type
> > - label
> > - remote_port (the port where the connector is connected to)
> > - remote_id (the endpoint where the connector is connected to)
>
> This assumes a single connection between a connector and a remote port,
> and a single port on the connector side. Is this guaranteed ? For the
> mini-DIN-4 connectors (often used for S-Video) for instance, I recall
> from the extensive discussions we had in the past that they should be
> modeled with two pins, one for the Y component and one for C components.
> The rationale for this is to support systems where such a connector
> could be used to carry S-Video, but also two composite video signals
> (usually through an external adapter from 2 RCA female connectors to one
> S-Video male connector) that would be routed to two separate video
> decoders (or two different inputs of the same video decoder). Other
> topologies may be possible too.
I got your concerns and I also remember the tvp5150 port bindings
myself in the past. Do you know how often such a setup you described
above happens these days? I would rather add more documentation to the
bindings [1] and add a check to v4l2_fwnode_parse_connector() to
guarantee that one port has only one endpoint. Because I don't think
that analog connectors has a bright future these days.
[1] Documentation/devicetree/bindings/display/connector/ \
analog-tv-connector.txt
> > The specific fields are within a union, since only one of them can be
> > available at the time. Since this is the initial support the patch adds
> > only the analog-connector specific ones.
> >
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
> > ---
> > [1] https://patchwork.kernel.org/cover/10794703/
> >
> > v6:
> > - fix some spelling and style issues
> > - rm unnecessary comments
> > - drop vga and dvi connector
> >
> > v2-v4:
> > - nothing since the patch was squashed from series [1] into this
> > series.
> >
> > include/media/v4l2-connector.h | 30 ++++++++++++++++++++++++++++++
> > include/media/v4l2-fwnode.h | 33 +++++++++++++++++++++++++++++++++
> > 2 files changed, 63 insertions(+)
> > create mode 100644 include/media/v4l2-connector.h
> >
> > diff --git a/include/media/v4l2-connector.h b/include/media/v4l2-connector.h
> > new file mode 100644
> > index 000000000000..3a951c54f50e
> > --- /dev/null
> > +++ b/include/media/v4l2-connector.h
> > @@ -0,0 +1,30 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * v4l2-connector.h
> > + *
> > + * V4L2 connector types.
> > + *
> > + * Copyright 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
> > + */
> > +
> > +#ifndef V4L2_CONNECTOR_H
> > +#define V4L2_CONNECTOR_H
> > +
> > +#define V4L2_CONNECTOR_MAX_LABEL 41
>
> Hans pointed out this was a weird number. Should you turn the label
> field into a pointer to make this more generic (with a
> v4l2_fwnode_connector_cleanup() function then) ?
Yes, that would be the better approach. I will change that.
Regards,
Marco
> > +
> > +/**
> > + * enum v4l2_connector_type - connector type
> > + * @V4L2_CON_UNKNOWN: unknown connector type, no V4L2 connetor configuration
> > + * @V4L2_CON_COMPOSITE: analog composite connector
> > + * @V4L2_CON_SVIDEO: analog svideo connector
> > + * @V4L2_CON_HDMI: digital hdmi connector
> > + */
> > +enum v4l2_connector_type {
> > + V4L2_CON_UNKNOWN,
> > + V4L2_CON_COMPOSITE,
> > + V4L2_CON_SVIDEO,
> > + V4L2_CON_HDMI,
> > +};
> > +
> > +#endif /* V4L2_CONNECTOR_H */
> > +
> > diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
> > index 6c07825e18b9..f4df1b95c5ef 100644
> > --- a/include/media/v4l2-fwnode.h
> > +++ b/include/media/v4l2-fwnode.h
> > @@ -22,6 +22,7 @@
> > #include <linux/list.h>
> > #include <linux/types.h>
> >
> > +#include <media/v4l2-connector.h>
> > #include <media/v4l2-mediabus.h>
> > #include <media/v4l2-subdev.h>
> >
> > @@ -126,6 +127,38 @@ struct v4l2_fwnode_link {
> > unsigned int remote_port;
> > };
> >
> > +/**
> > + * struct v4l2_fwnode_connector_analog - analog connector data structure
> > + * @supported_tvnorms: tv norms this connector supports, set to V4L2_STD_ALL
> > + * if no restrictions are specified.
> > + */
> > +struct v4l2_fwnode_connector_analog {
> > + v4l2_std_id supported_tvnorms;
> > +};
> > +
> > +/**
> > + * struct v4l2_fwnode_connector - the connector data structure
> > + * @remote_port: identifier of the remote endpoint port the connector connects
> > + * to
> > + * @remote_id: identifier of the remote endpoint the connector connects to
> > + * @label: connetor label
> > + * @type: connector type
> > + * @connector: connector configuration
> > + * @connector.analog: analog connector configuration
> > + * &struct v4l2_fwnode_connector_analog
> > + */
> > +struct v4l2_fwnode_connector {
> > + unsigned int remote_port;
> > + unsigned int remote_id;
> > + char label[V4L2_CONNECTOR_MAX_LABEL];
> > + enum v4l2_connector_type type;
> > +
> > + union {
> > + struct v4l2_fwnode_connector_analog analog;
> > + /* future connectors */
> > + } connector;
> > +};
> > +
> > /**
> > * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
> > * @fwnode: pointer to the endpoint's fwnode handle
>
> --
> Regards,
>
> Laurent Pinchart
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2019-08-09 7:55 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-15 12:44 [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-04-15 12:44 ` [PATCH v6 01/13] dt-bindings: connector: analog: add tv norms property Marco Felsch
2019-05-06 10:01 ` Hans Verkuil
2019-05-06 10:06 ` Hans Verkuil
2019-05-14 18:11 ` Mauro Carvalho Chehab
2019-08-09 6:00 ` Marco Felsch
2019-05-16 16:27 ` Laurent Pinchart
2019-08-09 5:58 ` Marco Felsch
2019-08-15 12:33 ` Laurent Pinchart
2019-08-15 12:50 ` Marco Felsch
2019-08-15 13:02 ` Laurent Pinchart
2019-08-15 13:35 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 02/13] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-05-06 9:50 ` Hans Verkuil
2019-05-14 18:17 ` Mauro Carvalho Chehab
2019-08-09 7:20 ` Marco Felsch
2019-05-16 16:36 ` Laurent Pinchart
2019-08-09 7:55 ` Marco Felsch [this message]
2019-08-15 12:38 ` Laurent Pinchart
2019-08-15 13:04 ` Marco Felsch
2019-08-15 13:10 ` Laurent Pinchart
2019-08-15 13:37 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 03/13] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-05-06 10:10 ` Hans Verkuil
2019-05-14 18:20 ` Mauro Carvalho Chehab
2019-05-16 16:51 ` Laurent Pinchart
2019-08-09 12:16 ` Marco Felsch
2019-08-15 12:48 ` Laurent Pinchart
2019-08-15 13:14 ` Marco Felsch
2019-08-09 8:59 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 04/13] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2019-04-15 12:44 ` [PATCH v6 05/13] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-05-06 10:09 ` Jacopo Mondi
2019-05-14 18:25 ` Mauro Carvalho Chehab
2019-05-16 18:03 ` Laurent Pinchart
2019-08-13 8:54 ` Marco Felsch
2019-08-15 12:51 ` Laurent Pinchart
2019-08-15 13:22 ` Marco Felsch
2019-08-15 13:26 ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 06/13] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-05-14 18:27 ` Mauro Carvalho Chehab
2019-05-16 18:05 ` Laurent Pinchart
2019-08-13 8:56 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 07/13] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-05-06 13:36 ` Jacopo Mondi
2019-08-09 5:33 ` Marco Felsch
2019-05-14 18:48 ` Mauro Carvalho Chehab
2019-08-09 5:34 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 08/13] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-05-14 20:20 ` Mauro Carvalho Chehab
2019-08-09 5:42 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 09/13] media: tvp5150: add s_power callback Marco Felsch
2019-05-14 20:13 ` Mauro Carvalho Chehab
2019-08-09 5:39 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 10/13] media: dt-bindings: tvp5150: cleanup bindings stlye Marco Felsch
2019-04-15 12:44 ` [PATCH v6 11/13] media: dt-bindings: tvp5150: add optional tvnorms documentation Marco Felsch
2019-04-15 12:44 ` [PATCH v6 12/13] media: tvp5150: add support to limit tv norms on connector Marco Felsch
2019-05-16 18:07 ` Laurent Pinchart
2019-08-13 9:10 ` Marco Felsch
2019-08-15 12:53 ` Laurent Pinchart
2019-08-15 13:26 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 13/13] media: tvp5150: make debug output more readable Marco Felsch
2019-05-06 13:39 ` Jacopo Mondi
2019-05-14 20:18 ` Mauro Carvalho Chehab
2019-08-09 5:42 ` Marco Felsch
2019-05-06 5:47 ` [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-05-14 17:18 ` Mauro Carvalho Chehab
2019-05-14 20:20 ` Mauro Carvalho Chehab
2019-05-14 20:58 ` Marco Felsch
2019-05-14 23:41 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190809075536.pukp444dmb7haoxj@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=jacopo+renesas@jmondi.org \
--cc=jacopo@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).