From: <dongchun.zhu@mediatek.com>
To: <mchehab@kernel.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <sakari.ailus@linux.intel.com>,
<drinkcat@chromium.org>, <tfiga@chromium.org>,
<matthias.bgg@gmail.com>, <bingbu.cao@intel.com>
Cc: <srv_heupstream@mediatek.com>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>,
<dongchun.zhu@mediatek.com>
Subject: [V3, 1/2] media: dt-bindings: media: i2c: Add bindings for OV02A10
Date: Mon, 19 Aug 2019 11:43:30 +0800 [thread overview]
Message-ID: <20190819034331.13098-2-dongchun.zhu@mediatek.com> (raw)
In-Reply-To: <20190819034331.13098-1-dongchun.zhu@mediatek.com>
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
Add device tree binding documentation for the OV02A10 camera sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
.../devicetree/bindings/media/i2c/ov02a10.txt | 54 ++++++++++++++++++++++
MAINTAINERS | 7 +++
2 files changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
new file mode 100644
index 0000000..4a83a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
@@ -0,0 +1,54 @@
+* Omnivision OV02A10 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: shall be "ovti,ov02a10"
+- clocks: reference to the xvclk input clock
+- clock-names: shall be "xvclk"
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- dvdd-supply: Digital core voltage supply, 1.8 volts
+- reset-gpios: reference to the GPIO connected to the reset pin, if any.
+ This is an active high signal to the OV02A10.
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+ if any. This is an active low signal to the OV02A10.
+
+Optional Properties:
+- rotation: as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt,
+ valid values are 0 (sensor mounted upright) and 180 (sensor
+ mounted upside down).
+
+The device node shall contain one 'port' child node with an
+'endpoint' subnode for its digital output video port,
+in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+The endpoint optional property 'data-lanes' shall be "<1>".
+
+Example:
+&i2c4 {
+ ov02a10: camera-sensor@3d {
+ compatible = "ovti,ov02a10";
+ reg = <0x3d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_pins_cam1_mclk_on>;
+
+ clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
+ <&topckgen CLK_TOP_UNIVP_192M_D8>;
+ clock-names = "xvclk", "freq_mux";
+
+ avdd-supply = <&mt6358_vcama1_reg>;
+ dvdd-supply = <&mt6358_vcn18_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+ reset-gpios = <&pio 109 1>;
+ powerdown-gpios = <&pio 107 1>;
+ rotation = <180>;
+
+ port {
+ /* MIPI CSI-2 bus endpoint */
+ ov02a10_core: endpoint {
+ remote-endpoint = <&ov02a10_0>;
+ data-lanes = <1>;
+ };
+ };
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e..41734fb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11816,6 +11816,13 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov13858.c
+OMNIVISION OV02A10 SENSOR DRIVER
+M: Dongchun Zhu <dongchun.zhu@mediatek.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/ov02a10.txt
+
OMNIVISION OV2680 SENSOR DRIVER
M: Rui Miguel Silva <rmfrfs@gmail.com>
L: linux-media@vger.kernel.org
--
2.9.2
next prev parent reply other threads:[~2019-08-19 3:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 3:43 [V3, 0/2] media: Add support for OV02A10 sensor dongchun.zhu
2019-08-19 3:43 ` dongchun.zhu [this message]
2019-08-27 16:48 ` [V3, 1/2] media: dt-bindings: media: i2c: Add bindings for OV02A10 Rob Herring
2019-08-19 3:43 ` [V3, 2/2] media: i2c: Add Omnivision OV02A10 camera sensor driver dongchun.zhu
2019-08-19 8:30 ` Sakari Ailus
2019-09-05 9:41 ` Dongchun Zhu
2019-09-05 10:45 ` Sakari Ailus
2019-09-05 10:53 ` Tomasz Figa
2019-09-05 16:05 ` Sakari Ailus
2019-09-05 22:58 ` Nicolas Boichat
2019-09-06 1:33 ` Dongchun Zhu
2019-09-07 3:51 ` Tomasz Figa
2019-08-21 10:30 ` Tomasz Figa
2019-08-21 11:05 ` Sakari Ailus
2019-08-26 6:54 ` Tomasz Figa
2019-09-05 15:54 ` Dongchun Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190819034331.13098-2-dongchun.zhu@mediatek.com \
--to=dongchun.zhu@mediatek.com \
--cc=bingbu.cao@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=louis.kuo@mediatek.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shengnan.wang@mediatek.com \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).