From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.3 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 17AA9C3A59F for ; Thu, 29 Aug 2019 17:04:31 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id CF35723403 for ; Thu, 29 Aug 2019 17:04:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="p7DRmr6t" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727437AbfH2RE0 (ORCPT ); Thu, 29 Aug 2019 13:04:26 -0400 Received: from mail-pf1-f196.google.com ([209.85.210.196]:39470 "EHLO mail-pf1-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726739AbfH2REZ (ORCPT ); Thu, 29 Aug 2019 13:04:25 -0400 Received: by mail-pf1-f196.google.com with SMTP id y200so2475890pfb.6 for ; Thu, 29 Aug 2019 10:04:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=u1NweFHywVhFtBtznCQD8mfVcnO9h2Cp5LSG7+s23KE=; b=p7DRmr6twX1FjAspa+jhrKjxpQdMCuMyyrw8sM4Hsu4P8eW+ByAj6ZwwL+/RT/a5Tl Oz/nPqxZ9bvACfkcnTv/22E544pSM83j66ZP6+FB5T4IVge6255jsncJ9/h12JkJ6bml Vyqz/Kwq1U4KASwGTPYcVROdZuMeA2tbPfKluxEpdFgTHIUDSBQ5bopJ3QwijEzmO56K L6pPN9y9yrbcTmdUn8RsJN84LJp7rrzvOE8YEDXE/td4DzjCTBT3JPLlFf5td+9btmx3 8FUhalSAAOLA3aDtr1kRM2iVPrIHJ6qMPHwKPftiXCZWqIVX0pbxS/DhP8Wpe/8yQdST C9Hw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=u1NweFHywVhFtBtznCQD8mfVcnO9h2Cp5LSG7+s23KE=; b=uR3LhnRYCdvQz4xJsqQf+DEc/eNfxL3J7WfkS4SwpWm0A767dJ5MLX5st8t630+s+f St1GbgnCe+SoTo4WBHOpdTHIWEe9wnpZmDr8IikTpEGR6OUL2dclEBQMckuAKpLdz36O nApiI6e1ibebOlF8MQh92qdSPAjreAld2sOMqXcoCH4PSlAnzaDCtP/8stblzOdfUInK GkQCahBaKFYng8NHfVusTrs+xFBLL0Ck3YPwmrWGjutfFPTh32aFEN45s0yr6qamS16H oCQiuyNFjuc4SanPom2Dg6QsMIj0WD1YQRRRtkl6Rxd3oCa34FjQeaHeCXbF6n5vd+hG eXCA== X-Gm-Message-State: APjAAAWXJy1aYzrfu5Ajeoxl5leZmVk39wMpumbBZL2UCPuO9uKw9UHU OWSqKFri4iNB+gWNP/uy3Pt4 X-Google-Smtp-Source: APXvYqzcp17XJgoZTGAU4GroQp10pL28dUcbfrhiI2c3p+jPWulA9CCFqhk9CAV9oy6DNoiUDRFBOw== X-Received: by 2002:a17:90a:af8d:: with SMTP id w13mr10767824pjq.92.1567098264208; Thu, 29 Aug 2019 10:04:24 -0700 (PDT) Received: from mani ([103.59.132.163]) by smtp.gmail.com with ESMTPSA id s5sm3187845pjo.26.2019.08.29.10.04.20 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Thu, 29 Aug 2019 10:04:23 -0700 (PDT) Date: Thu, 29 Aug 2019 22:34:15 +0530 From: Manivannan Sadhasivam To: Sakari Ailus Cc: mchehab@kernel.org, robh+dt@kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, c.barrett@framos.com, a.brela@framos.com Subject: Re: [PATCH v2 2/3] media: i2c: Add IMX290 CMOS image sensor driver Message-ID: <20190829170415.GA4427@mani> References: <20190806130938.19916-1-manivannan.sadhasivam@linaro.org> <20190806130938.19916-3-manivannan.sadhasivam@linaro.org> <20190813105920.GH835@valkosipuli.retiisi.org.uk> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20190813105920.GH835@valkosipuli.retiisi.org.uk> User-Agent: Mutt/1.9.4 (2018-02-28) Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Sakari, Thanks for the review! On Tue, Aug 13, 2019 at 01:59:20PM +0300, Sakari Ailus wrote: > Hi Manivannan, > > On Tue, Aug 06, 2019 at 06:39:37PM +0530, Manivannan Sadhasivam wrote: > > Add driver for Sony IMX290 CMOS image sensor driver. The driver only > > supports I2C interface for programming and MIPI CSI-2 for sensor output. > > > > Signed-off-by: Manivannan Sadhasivam > > --- > > drivers/media/i2c/Kconfig | 11 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/imx290.c | 845 +++++++++++++++++++++++++++++++++++++ > > 3 files changed, 857 insertions(+) > > create mode 100644 drivers/media/i2c/imx290.c > > > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index cb8db944aa41..256edd289abe 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -594,6 +594,17 @@ config VIDEO_IMX274 > > This is a V4L2 sensor driver for the Sony IMX274 > > CMOS image sensor. > > > > +config VIDEO_IMX290 > > + tristate "Sony IMX290 sensor support" > > + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > > + depends on MEDIA_CAMERA_SUPPORT > > + help > > + This is a Video4Linux2 sensor driver for the Sony > > + IMX290 camera sensor. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called imx290. > > + > > config VIDEO_IMX319 > > tristate "Sony IMX319 sensor support" > > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index d8ad9dad495d..490e59070407 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -111,6 +111,7 @@ obj-$(CONFIG_VIDEO_TC358743) += tc358743.o > > obj-$(CONFIG_VIDEO_IMX214) += imx214.o > > obj-$(CONFIG_VIDEO_IMX258) += imx258.o > > obj-$(CONFIG_VIDEO_IMX274) += imx274.o > > +obj-$(CONFIG_VIDEO_IMX290) += imx290.o > > obj-$(CONFIG_VIDEO_IMX319) += imx319.o > > obj-$(CONFIG_VIDEO_IMX355) += imx355.o > > obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > > new file mode 100644 > > index 000000000000..8c50fbd51ca5 > > --- /dev/null > > +++ b/drivers/media/i2c/imx290.c > > @@ -0,0 +1,845 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Sony IMX290 CMOS Image Sensor Driver > > + * > > + * Copyright (C) 2019 FRAMOS GmbH. > > + * > > + * Copyright (C) 2019 Linaro Ltd. > > + * Author: Manivannan Sadhasivam > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define IMX290_STANDBY 0x3000 > > +#define IMX290_REGHOLD 0x3001 > > +#define IMX290_XMSTA 0x3002 > > +#define IMX290_GAIN 0x3014 > > + > > +static const char * const imx290_supply_name[] = { > > + "vdda", > > + "vddd", > > + "vdddo", > > +}; > > + > > +#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name) > > + > > +struct imx290_regval { > > + u16 reg; > > + u8 val; > > +}; > > + > > +struct imx290_mode { > > + u32 width; > > + u32 height; > > + u32 pixel_rate; > > + u32 link_freq_index; > > + > > + const struct imx290_regval *data; > > + u32 data_size; > > +}; > > + > > +struct imx290 { > > + struct device *dev; > > + struct clk *xclk; > > + struct regmap *regmap; > > + > > + struct v4l2_subdev sd; > > + struct v4l2_fwnode_endpoint ep; > > + struct media_pad pad; > > + struct v4l2_mbus_framefmt current_format; > > + const struct imx290_mode *current_mode; > > + > > + struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES]; > > + struct gpio_desc *rst_gpio; > > + > > + struct v4l2_ctrl_handler ctrls; > > + struct v4l2_ctrl *link_freq; > > + struct v4l2_ctrl *pixel_rate; > > + > > + struct mutex lock; > > +}; > > + > > +struct imx290_pixfmt { > > + u32 code; > > + u32 colorspace; > > +}; > > + > > +static const struct imx290_pixfmt imx290_formats[] = { > > + { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_COLORSPACE_SRGB, }, > > I bet you won't use other colorspaces in this driver. Therefore there's > there's no need to put it in an array. > Ack. > > +}; > > + > > +static struct regmap_config imx290_regmap_config = { > > + .reg_bits = 16, > > + .val_bits = 8, > > + .cache_type = REGCACHE_RBTREE, > > +}; > > + > > +static const struct imx290_regval imx290_global_init_settings[] = { > > + { 0x3007, 0x00 }, > > + { 0x3009, 0x00 }, > > + { 0x3018, 0x65 }, > > + { 0x3019, 0x04 }, > > + { 0x301a, 0x00 }, > > + { 0x3443, 0x03 }, > > + { 0x3444, 0x20 }, > > + { 0x3445, 0x25 }, > > + { 0x3407, 0x03 }, > > + { 0x303a, 0x0c }, > > + { 0x3040, 0x00 }, > > + { 0x3041, 0x00 }, > > + { 0x303c, 0x00 }, > > + { 0x303d, 0x00 }, > > + { 0x3042, 0x9c }, > > + { 0x3043, 0x07 }, > > + { 0x303e, 0x49 }, > > + { 0x303f, 0x04 }, > > + { 0x304b, 0x0a }, > > + { 0x300f, 0x00 }, > > + { 0x3010, 0x21 }, > > + { 0x3012, 0x64 }, > > + { 0x3016, 0x09 }, > > + { 0x3070, 0x02 }, > > + { 0x3071, 0x11 }, > > + { 0x309b, 0x10 }, > > + { 0x309c, 0x22 }, > > + { 0x30a2, 0x02 }, > > + { 0x30a6, 0x20 }, > > + { 0x30a8, 0x20 }, > > + { 0x30aa, 0x20 }, > > + { 0x30ac, 0x20 }, > > + { 0x30b0, 0x43 }, > > + { 0x3119, 0x9e }, > > + { 0x311c, 0x1e }, > > + { 0x311e, 0x08 }, > > + { 0x3128, 0x05 }, > > + { 0x313d, 0x83 }, > > + { 0x3150, 0x03 }, > > + { 0x317e, 0x00 }, > > + { 0x32b8, 0x50 }, > > + { 0x32b9, 0x10 }, > > + { 0x32ba, 0x00 }, > > + { 0x32bb, 0x04 }, > > + { 0x32c8, 0x50 }, > > + { 0x32c9, 0x10 }, > > + { 0x32ca, 0x00 }, > > + { 0x32cb, 0x04 }, > > + { 0x332c, 0xd3 }, > > + { 0x332d, 0x10 }, > > + { 0x332e, 0x0d }, > > + { 0x3358, 0x06 }, > > + { 0x3359, 0xe1 }, > > + { 0x335a, 0x11 }, > > + { 0x3360, 0x1e }, > > + { 0x3361, 0x61 }, > > + { 0x3362, 0x10 }, > > + { 0x33b0, 0x50 }, > > + { 0x33b2, 0x1a }, > > + { 0x33b3, 0x04 }, > > +}; > > + > > +static const struct imx290_regval imx290_1080p_settings[] = { > > + /* mode settings */ > > + { 0x3007, 0x00 }, > > + { 0x303a, 0x0c }, > > + { 0x3414, 0x0a }, > > + { 0x3472, 0x80 }, > > + { 0x3473, 0x07 }, > > + { 0x3418, 0x38 }, > > + { 0x3419, 0x04 }, > > + { 0x3012, 0x64 }, > > + { 0x3013, 0x00 }, > > + { 0x305c, 0x18 }, > > + { 0x305d, 0x03 }, > > + { 0x305e, 0x20 }, > > + { 0x305f, 0x01 }, > > + { 0x315e, 0x1a }, > > + { 0x3164, 0x1a }, > > + { 0x3480, 0x49 }, > > + /* data rate settings */ > > + { 0x3009, 0x01 }, > > + { 0x3405, 0x10 }, > > + { 0x3446, 0x57 }, > > + { 0x3447, 0x00 }, > > + { 0x3448, 0x37 }, > > + { 0x3449, 0x00 }, > > + { 0x344a, 0x1f }, > > + { 0x344b, 0x00 }, > > + { 0x344c, 0x1f }, > > + { 0x344d, 0x00 }, > > + { 0x344e, 0x1f }, > > + { 0x344f, 0x00 }, > > + { 0x3450, 0x77 }, > > + { 0x3451, 0x00 }, > > + { 0x3452, 0x1f }, > > + { 0x3453, 0x00 }, > > + { 0x3454, 0x17 }, > > + { 0x3455, 0x00 }, > > + { 0x301c, 0x98 }, > > + { 0x301d, 0x08 }, > > +}; > > + > > +static const struct imx290_regval imx290_720p_settings[] = { > > + /* mode settings */ > > + { 0x3007, 0x10 }, > > + { 0x303a, 0x06 }, > > + { 0x3414, 0x04 }, > > + { 0x3472, 0x00 }, > > + { 0x3473, 0x05 }, > > + { 0x3418, 0xd0 }, > > + { 0x3419, 0x02 }, > > + { 0x3012, 0x64 }, > > + { 0x3013, 0x00 }, > > + { 0x305c, 0x20 }, > > + { 0x305d, 0x00 }, > > + { 0x305e, 0x20 }, > > + { 0x305f, 0x01 }, > > + { 0x315e, 0x1a }, > > + { 0x3164, 0x1a }, > > + { 0x3480, 0x49 }, > > + /* data rate settings */ > > + { 0x3009, 0x01 }, > > + { 0x3405, 0x10 }, > > + { 0x3446, 0x4f }, > > + { 0x3447, 0x00 }, > > + { 0x3448, 0x2f }, > > + { 0x3449, 0x00 }, > > + { 0x344a, 0x17 }, > > + { 0x344b, 0x00 }, > > + { 0x344c, 0x17 }, > > + { 0x344d, 0x00 }, > > + { 0x344e, 0x17 }, > > + { 0x344f, 0x00 }, > > + { 0x3450, 0x57 }, > > + { 0x3451, 0x00 }, > > + { 0x3452, 0x17 }, > > + { 0x3453, 0x00 }, > > + { 0x3454, 0x17 }, > > + { 0x3455, 0x00 }, > > + { 0x301c, 0xe4 }, > > + { 0x301d, 0x0c }, > > +}; > > + > > +static const struct imx290_regval imx290_10bit_settings[] = { > > + { 0x3005, 0x00}, > > + { 0x3046, 0x00}, > > + { 0x3129, 0x1d}, > > + { 0x317c, 0x12}, > > + { 0x31ec, 0x37}, > > + { 0x3441, 0x0a}, > > + { 0x3442, 0x0a}, > > + { 0x300a, 0x3c}, > > + { 0x300b, 0x00}, > > +}; > > + > > +/* supported link frequencies */ > > +static const s64 imx290_link_freq[] = { > > + 445500000, > > +}; > > + > > +/* Mode configs */ > > +static const struct imx290_mode imx290_modes[] = { > > + { > > + .width = 1920, > > + .height = 1080, > > + .data = imx290_1080p_settings, > > + .data_size = ARRAY_SIZE(imx290_1080p_settings), > > + .pixel_rate = 178200000, > > + .link_freq_index = 0, > > + }, > > + { > > + .width = 1280, > > + .height = 720, > > + .data = imx290_720p_settings, > > + .data_size = ARRAY_SIZE(imx290_720p_settings), > > + .pixel_rate = 178200000, > > + .link_freq_index = 0, > > + }, > > +}; > > + > > +static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd) > > +{ > > + return container_of(_sd, struct imx290, sd); > > +} > > + > > +static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value) > > +{ > > + u32 regval; > > + int ret; > > + > > + ret = regmap_read(imx290->regmap, addr, ®val); > > + if (ret) { > > + dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr); > > + return ret; > > + } > > + > > + *value = regval & 0xFF; > > Lower case hexadecimals are preferred. > Ack. > > + > > + return 0; > > +} > > + > > +static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value) > > +{ > > + int ret; > > + > > + ret = regmap_write(imx290->regmap, addr, value); > > + if (ret) { > > + dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr); > > + return ret; > > + } > > + > > + return ret; > > +} > > + > > +static int imx290_set_register_array(struct imx290 *imx290, > > + const struct imx290_regval *settings, > > + unsigned int num_settings) > > +{ > > + unsigned int i; > > + int ret; > > + > > + for (i = 0; i < num_settings; ++i, ++settings) { > > + ret = imx290_write_reg(imx290, settings->reg, settings->val); > > + if (ret < 0) > > + return ret; > > + > > + /* Settle time is 10ms for all registers */ > > + msleep(10); > > + } > > + > > + return 0; > > +} > > + > > +static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low, > > + u8 nr_regs, u32 value) > > +{ > > + int ret, i; > > unsigned int i > okay. > > + u8 val = 0; > > + > > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting hold register\n"); > > + return ret; > > + } > > + > > + for (i = 0; i < nr_regs; i++) { > > + imx290_read_reg(imx290, address_low + i, &val); > > What's the purpose of reading back val, and doing the same again below? > > You could do this in a much more simple way in a single write, see e.g. > ov5670_write_reg(). > Right, this came from the vendor driver but looks like we don't need to read before and after. Will remove the read calls. > > + ret = imx290_write_reg(imx290, address_low + i, > > + (u8)(value >> (i * 8))); > > + if (ret) { > > + dev_err(imx290->dev, "Error writing buffered registers\n"); > > + return ret; > > + } > > + imx290_read_reg(imx290, address_low + i, &val); > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting hold register\n"); > > + return ret; > > + } > > + > > + return ret; > > +} > > + > > +static int imx290_set_gain(struct imx290 *imx290, u32 value) > > +{ > > + int ret; > > + > > + u32 adjusted_value = (value * 10) / 3; > > + > > + ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value); > > + if (ret) > > + dev_err(imx290->dev, "Unable to write gain\n"); > > + > > + return ret; > > +} > > + > > +static int imx290_set_power_on(struct imx290 *imx290) > > +{ > > + int ret; > > + > > + ret = clk_prepare_enable(imx290->xclk); > > + if (ret) { > > + dev_err(imx290->dev, "Failed to enable clock\n"); > > + return ret; > > + } > > + > > + ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES, > > + imx290->supplies); > > + if (ret) { > > + dev_err(imx290->dev, "Failed to enable regulators\n"); > > + goto xclk_off; > > + } > > + > > + usleep_range(1, 2); > > + gpiod_set_value_cansleep(imx290->rst_gpio, 1); > > + usleep_range(30000, 31000); > > + > > + return 0; > > + > > +xclk_off: > > + clk_disable_unprepare(imx290->xclk); > > + return ret; > > +} > > + > > +/* Stop streaming */ > > +static int imx290_stop_streaming(struct imx290 *imx290) > > +{ > > + int ret; > > + > > + ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01); > > + if (ret < 0) > > + return ret; > > + > > + msleep(30); > > + > > + return imx290_write_reg(imx290, IMX290_XMSTA, 0x01); > > +} > > + > > +static void imx290_set_power_off(struct imx290 *imx290) > > +{ > > + clk_disable_unprepare(imx290->xclk); > > + gpiod_set_value_cansleep(imx290->rst_gpio, 0); > > + regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies); > > +} > > + > > +static int imx290_s_power(struct v4l2_subdev *sd, int on) > > +{ > > + struct imx290 *imx290 = to_imx290(sd); > > + int ret = 0; > > + > > + mutex_lock(&imx290->lock); > > + > > + if (on) { > > + ret = imx290_set_power_on(imx290); > > + if (ret < 0) > > + goto exit; > > + > > + ret = imx290_set_register_array(imx290, > > + imx290_global_init_settings, > > + ARRAY_SIZE(imx290_global_init_settings)); > > + if (ret < 0) { > > + dev_err(imx290->dev, > > + "Could not set init registers\n"); > > + imx290_set_power_off(imx290); > > + goto exit; > > + } > > + > > + imx290_stop_streaming(imx290); > > + } else { > > + imx290_set_power_off(imx290); > > + } > > + > > +exit: > > + mutex_unlock(&imx290->lock); > > + > > + return ret; > > Please use runtime PM instead. It simplifies the driver. See e.g. > drivers/media/i2c/ov5670.c or drivers/media/i2c/ov5695.c . > Ack. > > +} > > + > > +static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct imx290 *imx290 = container_of(ctrl->handler, > > + struct imx290, ctrls); > > + int ret = 0; > > + > > + mutex_lock(&imx290->lock); > > + > > + switch (ctrl->id) { > > + case V4L2_CID_GAIN: > > + ret = imx290_set_gain(imx290, ctrl->val); > > + break; > > + default: > > + dev_info(imx290->dev, "ctrl(id:0x%x,val:0x%x) is not handled", > > + ctrl->id, ctrl->val); > > Please return an error; I'd do it instead of printing that. > Okay. > > + break; > > + } > > + > > + mutex_unlock(&imx290->lock); > > + > > + return ret; > > +} > > + > > +static const struct v4l2_ctrl_ops imx290_ctrl_ops = { > > + .s_ctrl = imx290_set_ctrl, > > +}; > > + > > +static int imx290_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + if (code->index >= ARRAY_SIZE(imx290_formats)) > > + return -EINVAL; > > + > > + code->code = imx290_formats[code->index].code; > > + > > + return 0; > > +} > > + > > +static int imx290_get_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct imx290 *imx290 = to_imx290(sd); > > + struct v4l2_mbus_framefmt *framefmt; > > + > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) > > + framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg, > > + fmt->pad); > > + else > > + framefmt = &imx290->current_format; > > + > > + fmt->format = *framefmt; > > + > > + return 0; > > +} > > + > > +static int imx290_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct imx290 *imx290 = to_imx290(sd); > > + const struct imx290_mode *mode; > > + struct v4l2_mbus_framefmt *format; > > + int i, ret = 0; > > Note that sub-device drivers need to serialise access through the uAPI to > their own data. > You mean guarding with mutex? > > + > > + mode = v4l2_find_nearest_size(imx290_modes, > > + ARRAY_SIZE(imx290_modes), > > + width, height, > > + fmt->format.width, fmt->format.height); > > + > > + fmt->format.width = mode->width; > > + fmt->format.height = mode->height; > > + > > + for (i = 0; i < ARRAY_SIZE(imx290_formats); i++) > > + if (imx290_formats[i].code == fmt->format.code) > > + break; > > + > > + if (i >= ARRAY_SIZE(imx290_formats)) > > + i = 0; > > + > > + fmt->format.code = imx290_formats[i].code; > > + fmt->format.colorspace = imx290_formats[i].colorspace; > > + fmt->format.field = V4L2_FIELD_NONE; > > + > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > > + format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); > > + } else { > > + format = &imx290->current_format; > > + __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index); > > + __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate); > > + > > + imx290->current_mode = mode; > > + } > > + > > + *format = fmt->format; > > + > > + return ret; > > +} > > + > > +static int imx290_entity_init_cfg(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg) > > +{ > > + struct v4l2_subdev_format fmt = { 0 }; > > + > > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > > + fmt.format.width = 1920; > > + fmt.format.height = 1080; > > + > > + imx290_set_fmt(subdev, cfg, &fmt); > > + > > + return 0; > > +} > > + > > +static int imx290_write_current_format(struct imx290 *imx290, > > + struct v4l2_mbus_framefmt *format) > > +{ > > + int ret; > > + > > + switch (format->code) { > > + case MEDIA_BUS_FMT_SRGGB10_1X10: > > + ret = imx290_set_register_array(imx290, imx290_10bit_settings, > > + ARRAY_SIZE(imx290_10bit_settings)); > > + if (ret < 0) { > > + dev_err(imx290->dev, "Could not set format registers\n"); > > + return ret; > > + } > > + break; > > + default: > > + dev_err(imx290->dev, "Unknown pixel format\n"); > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +/* Start streaming */ > > +static int imx290_start_streaming(struct imx290 *imx290) > > +{ > > + int ret; > > + > > + /* Set current frame format */ > > + ret = imx290_write_current_format(imx290, &imx290->current_format); > > + if (ret < 0) { > > + dev_err(imx290->dev, "Could not set frame format\n"); > > + return ret; > > + } > > + > > + /* Apply default values of current mode */ > > + ret = imx290_set_register_array(imx290, imx290->current_mode->data, > > + imx290->current_mode->data_size); > > + if (ret < 0) { > > + dev_err(imx290->dev, "Could not set current mode\n"); > > + return ret; > > + } > > + > > + /* Apply customized values from user */ > > + ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler); > > + if (ret) { > > + dev_err(imx290->dev, "Could not sync v4l2 controls\n"); > > + return ret; > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00); > > + if (ret < 0) > > + return ret; > > + > > + msleep(30); > > + > > + /* Start streaming */ > > + return imx290_write_reg(imx290, IMX290_XMSTA, 0x00); > > +} > > + > > +static int imx290_set_stream(struct v4l2_subdev *sd, int enable) > > +{ > > + struct imx290 *imx290 = to_imx290(sd); > > + int ret = 0; > > + > > + if (enable) > > + ret = imx290_start_streaming(imx290); > > + else > > + imx290_stop_streaming(imx290); > > + > > + return ret; > > +} > > + > > +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < IMX290_NUM_SUPPLIES; i++) > > + imx290->supplies[i].supply = imx290_supply_name[i]; > > + > > + return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES, > > + imx290->supplies); > > +} > > + > > +static const struct v4l2_subdev_core_ops imx290_subdev_core_ops = { > > + .s_power = imx290_s_power, > > +}; > > + > > +static const struct v4l2_subdev_video_ops imx290_video_ops = { > > + .s_stream = imx290_set_stream, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops imx290_pad_ops = { > > + .init_cfg = imx290_entity_init_cfg, > > + .enum_mbus_code = imx290_enum_mbus_code, > > + .get_fmt = imx290_get_fmt, > > + .set_fmt = imx290_set_fmt, > > +}; > > + > > +static const struct v4l2_subdev_ops imx290_subdev_ops = { > > + .core = &imx290_subdev_core_ops, > > + .video = &imx290_video_ops, > > + .pad = &imx290_pad_ops, > > +}; > > + > > +static const struct media_entity_operations imx290_subdev_entity_ops = { > > + .link_validate = v4l2_subdev_link_validate, > > +}; > > + > > +static int imx290_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct fwnode_handle *endpoint; > > + struct imx290 *imx290; > > + u32 xclk_freq; > > + int ret; > > + > > + imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL); > > + if (!imx290) > > + return -ENOMEM; > > + > > + imx290->dev = dev; > > + imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config); > > + if (IS_ERR(imx290->regmap)) { > > + dev_err(dev, "Unable to initialize I2C\n"); > > + return -ENODEV; > > + } > > + > > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); > > + if (!endpoint) { > > + dev_err(dev, "Endpoint node not found\n"); > > + return -EINVAL; > > + } > > + > > + ret = v4l2_fwnode_endpoint_parse(endpoint, &imx290->ep); > > + fwnode_handle_put(endpoint); > > + if (ret < 0) { > > + dev_err(dev, "Parsing endpoint node failed\n"); > > + return ret; > > + } > > + > > + /* Only CSI2 is supported for now */ > > + if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) { > > + dev_err(dev, "Unsupported bus type, should be CSI2\n"); > > + return -EINVAL; > > + } > > + > > + /* Set default mode to max resolution */ > > + imx290->current_mode = &imx290_modes[0]; > > + > > + /* get system clock (xclk) */ > > + imx290->xclk = devm_clk_get(dev, "xclk"); > > + if (IS_ERR(imx290->xclk)) { > > + dev_err(dev, "Could not get xclk"); > > + return PTR_ERR(imx290->xclk); > > + } > > + > > + ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); > > + if (ret) { > > + dev_err(dev, "Could not get xclk frequency\n"); > > + return ret; > > + } > > + > > + /* external clock must be 37.125 MHz */ > > + if (xclk_freq != 37125000) { > > + dev_err(dev, "External clock frequency %u is not supported\n", > > + xclk_freq); > > + return -EINVAL; > > + } > > + > > + ret = clk_set_rate(imx290->xclk, xclk_freq); > > + if (ret) { > > + dev_err(dev, "Could not set xclk frequency\n"); > > + return ret; > > + } > > + > > + ret = imx290_get_regulators(dev, imx290); > > + if (ret < 0) { > > + dev_err(dev, "Cannot get regulators\n"); > > + return ret; > > + } > > + > > + imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); > > + if (IS_ERR(imx290->rst_gpio)) { > > + dev_err(dev, "Cannot get reset gpio\n"); > > Remember to put the regulators from now on. Or grab them later. > Shouldn't that happen by default with devm_regulator* APIs? > > + return PTR_ERR(imx290->rst_gpio); > > + } > > + > > + mutex_init(&imx290->lock); > > + > > + v4l2_ctrl_handler_init(&imx290->ctrls, 3); > > + > > + v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, > > + V4L2_CID_GAIN, 0, 72, 1, 0); > > + imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls, > > + &imx290_ctrl_ops, > > + V4L2_CID_LINK_FREQ, > > + ARRAY_SIZE(imx290_link_freq) - 1, > > + 0, imx290_link_freq); > > + if (imx290->link_freq) > > + imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, > > + V4L2_CID_PIXEL_RATE, 1, > > + INT_MAX, 1, > > + imx290_modes[0].pixel_rate); > > + > > + imx290->sd.ctrl_handler = &imx290->ctrls; > > + > > + if (imx290->ctrls.error) { > > + dev_err(dev, "Control initialization error %d\n", > > + imx290->ctrls.error); > > + ret = imx290->ctrls.error; > > + goto free_ctrl; > > + } > > + > > + v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops); > > + imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + imx290->sd.dev = &client->dev; > > + imx290->sd.entity.ops = &imx290_subdev_entity_ops; > > + imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > + > > + imx290->pad.flags = MEDIA_PAD_FL_SOURCE; > > + ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad); > > + if (ret < 0) { > > + dev_err(dev, "Could not register media entity\n"); > > + goto free_ctrl; > > + } > > + > > + ret = v4l2_async_register_subdev(&imx290->sd); > > + if (ret < 0) { > > + dev_err(dev, "Could not register v4l2 device\n"); > > + goto free_entity; > > + } > > + > > + return 0; > > + > > +free_entity: > > + media_entity_cleanup(&imx290->sd.entity); > > +free_ctrl: > > + v4l2_ctrl_handler_free(&imx290->ctrls); > > + mutex_destroy(&imx290->lock); > > + > > + return ret; > > +} > > + > > +static int imx290_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct imx290 *imx290 = to_imx290(sd); > > + > > + v4l2_async_unregister_subdev(sd); > > + media_entity_cleanup(&sd->entity); > > + v4l2_ctrl_handler_free(sd->ctrl_handler); > > + > > + imx290_set_power_off(imx290); > > + mutex_destroy(&imx290->lock); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id imx290_of_match[] = { > > + { .compatible = "sony,imx290" }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, imx290_of_match); > > + > > +static struct i2c_driver imx290_i2c_driver = { > > + .probe = imx290_probe, > > Please use probe_new instead. > Ack. Thanks, Mani > > + .remove = imx290_remove, > > + .driver = { > > + .name = "imx290", > > + .of_match_table = of_match_ptr(imx290_of_match), > > + }, > > +}; > > + > > +module_i2c_driver(imx290_i2c_driver); > > + > > +MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver"); > > +MODULE_AUTHOR("FRAMOS GmbH"); > > +MODULE_AUTHOR("Manivannan Sadhasivam "); > > +MODULE_LICENSE("GPL v2"); > > -- > Kind regards, > > Sakari Ailus