[PATCH v3 7/9] media: ov6650: Fix default format not applied on device probe

[Janusz Krzysztofik <jmkrzyszt@gmail.com>]

It is not clear what pixel format is actually configured in hardware on
reset.  MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the
driver was intiially submitted, is for sure not the one.

Fix it by explicitly applying a known, driver default frame format just
after initial device reset.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
 drivers/media/i2c/ov6650.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index b62a238a83d0..4fd8ac8e3994 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -873,6 +873,11 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)
 	ret = ov6650_reset(client);
 	if (!ret)
 		ret = ov6650_prog_dflt(client);
+	if (!ret) {
+		struct v4l2_mbus_framefmt mf = ov6650_def_fmt;
+
+		ret = ov6650_s_fmt(sd, &mf);
+	}
 	if (!ret)
 		ret = v4l2_ctrl_handler_setup(&priv->hdl);
 
@@ -1027,8 +1032,6 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->rect.top	  = DEF_VSTRT << 1;
 	priv->rect.width  = W_CIF;
 	priv->rect.height = H_CIF;
-	priv->half_scale  = false;
-	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
 
 	priv->subdev.internal_ops = &ov6650_internal_ops;
 
-- 
2.21.0