linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT}
@ 2019-09-05 21:49 Niklas Söderlund
  2019-09-05 21:49 ` [PATCH 1/2] rcar-vin: Move hardware buffer tracking to own struct Niklas Söderlund
  2019-09-05 21:49 ` [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
  0 siblings, 2 replies; 4+ messages in thread
From: Niklas Söderlund @ 2019-09-05 21:49 UTC (permalink / raw)
  To: Laurent Pinchart, linux-media; +Cc: linux-renesas-soc, Niklas Söderlund

Hi,

This series add support for sequential filed formats to rcar-vin. The 
series is based on [1] and tested on both R-Car Gen2 and Gen3 boards 
without regressions.

Patch 1/2 prepares for the new filed formats by reworking and renaming 
an existing struct member while 2/2 adds support for the two new field 
formats.

1. [PATCH v3 0/6] rcar-vin: Add support for V4L2_FIELD_ALTERNATE

Niklas Söderlund (2):
  rcar-vin: Move hardware buffer tracking to own struct
  rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}

 drivers/media/platform/rcar-vin/rcar-dma.c  | 80 ++++++++++++++++-----
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  7 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 28 ++++++--
 3 files changed, 91 insertions(+), 24 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/2] rcar-vin: Move hardware buffer tracking to own struct
  2019-09-05 21:49 [PATCH 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
@ 2019-09-05 21:49 ` Niklas Söderlund
  2019-09-05 21:49 ` [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
  1 sibling, 0 replies; 4+ messages in thread
From: Niklas Söderlund @ 2019-09-05 21:49 UTC (permalink / raw)
  To: Laurent Pinchart, linux-media; +Cc: linux-renesas-soc, Niklas Söderlund

To support SEQ_TB/BT not all buffers given to the hardware will be
equal, the driver needs to keep track of different buffer types. Move
the tracking of buffers given to hardware into a struct so additional
tracking fields can be associated with each buffer.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 27 +++++++++++-----------
 drivers/media/platform/rcar-vin/rcar-vin.h |  9 ++++----
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index af4f774149f08597..a9fffadc268e96ba 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -841,20 +841,20 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
 	dma_addr_t phys_addr;
 
 	/* A already populated slot shall never be overwritten. */
-	if (WARN_ON(vin->queue_buf[slot] != NULL))
+	if (WARN_ON(vin->buf_hw[slot].buffer != NULL))
 		return;
 
 	vin_dbg(vin, "Filling HW slot: %d\n", slot);
 
 	if (list_empty(&vin->buf_list)) {
-		vin->queue_buf[slot] = NULL;
+		vin->buf_hw[slot].buffer = NULL;
 		phys_addr = vin->scratch_phys;
 	} else {
 		/* Keep track of buffer we give to HW */
 		buf = list_entry(vin->buf_list.next, struct rvin_buffer, list);
 		vbuf = &buf->vb;
 		list_del_init(to_buf_list(vbuf));
-		vin->queue_buf[slot] = vbuf;
+		vin->buf_hw[slot].buffer = vbuf;
 
 		/* Setup DMA */
 		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
@@ -950,13 +950,14 @@ static irqreturn_t rvin_irq(int irq, void *data)
 	}
 
 	/* Capture frame */
-	if (vin->queue_buf[slot]) {
-		vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
-		vin->queue_buf[slot]->sequence = vin->sequence;
-		vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
-		vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf,
+	if (vin->buf_hw[slot].buffer) {
+		vin->buf_hw[slot].buffer->field =
+			rvin_get_active_field(vin, vnms);
+		vin->buf_hw[slot].buffer->sequence = vin->sequence;
+		vin->buf_hw[slot].buffer->vb2_buf.timestamp = ktime_get_ns();
+		vb2_buffer_done(&vin->buf_hw[slot].buffer->vb2_buf,
 				VB2_BUF_STATE_DONE);
-		vin->queue_buf[slot] = NULL;
+		vin->buf_hw[slot].buffer = NULL;
 	} else {
 		/* Scratch buffer was used, dropping frame. */
 		vin_dbg(vin, "Dropping frame %u\n", vin->sequence);
@@ -980,10 +981,10 @@ static void return_all_buffers(struct rvin_dev *vin,
 	int i;
 
 	for (i = 0; i < HW_BUFFER_NUM; i++) {
-		if (vin->queue_buf[i]) {
-			vb2_buffer_done(&vin->queue_buf[i]->vb2_buf,
+		if (vin->buf_hw[i].buffer) {
+			vb2_buffer_done(&vin->buf_hw[i].buffer->vb2_buf,
 					state);
-			vin->queue_buf[i] = NULL;
+			vin->buf_hw[i].buffer = NULL;
 		}
 	}
 
@@ -1288,7 +1289,7 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
 	vin->state = STOPPED;
 
 	for (i = 0; i < HW_BUFFER_NUM; i++)
-		vin->queue_buf[i] = NULL;
+		vin->buf_hw[i].buffer = NULL;
 
 	/* buffer queue */
 	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 86e9bad44484092c..9031fe7f569b908e 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -162,9 +162,8 @@ struct rvin_info {
  * @scratch:		cpu address for scratch buffer
  * @scratch_phys:	physical address of the scratch buffer
  *
- * @qlock:		protects @queue_buf, @buf_list, @sequence
- *			@state
- * @queue_buf:		Keeps track of buffers given to HW slot
+ * @qlock:		protects @buf_hw, @buf_list, @sequence and @state
+ * @buf_hw:		Keeps track of buffers given to HW slot
  * @buf_list:		list of queued buffers
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
@@ -203,7 +202,9 @@ struct rvin_dev {
 	dma_addr_t scratch_phys;
 
 	spinlock_t qlock;
-	struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_NUM];
+	struct {
+		struct vb2_v4l2_buffer *buffer;
+	} buf_hw[HW_BUFFER_NUM];
 	struct list_head buf_list;
 	unsigned int sequence;
 	enum rvin_dma_state state;
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
  2019-09-05 21:49 [PATCH 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
  2019-09-05 21:49 ` [PATCH 1/2] rcar-vin: Move hardware buffer tracking to own struct Niklas Söderlund
@ 2019-09-05 21:49 ` Niklas Söderlund
  2019-09-06 10:23   ` Sergei Shtylyov
  1 sibling, 1 reply; 4+ messages in thread
From: Niklas Söderlund @ 2019-09-05 21:49 UTC (permalink / raw)
  To: Laurent Pinchart, linux-media; +Cc: linux-renesas-soc, Niklas Söderlund

The hardware do not support capturing the field types V4L2_FIELD_SEQ_TB
and V4L2_FIELD_SEQ_BT. To capture in these formats the driver needs to
adjust the offset of the capture buffer and capture twice to each vb2
buffer.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  | 57 ++++++++++++++++++---
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  7 ++-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 19 +++++++
 3 files changed, 74 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index a9fffadc268e96ba..c46f6e90627d45fd 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -534,7 +534,7 @@ static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
 
 	/* Set scaling coefficient */
 	crop_height = vin->crop.height;
-	if (V4L2_FIELD_IS_INTERLACED(vin->format.field))
+	if (V4L2_FIELD_HAS_BOTH(vin->format.field))
 		crop_height *= 2;
 
 	ys = 0;
@@ -625,6 +625,8 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_FIELD_INTERLACED_BT:
 		vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
+	case V4L2_FIELD_SEQ_TB:
+	case V4L2_FIELD_SEQ_BT:
 	case V4L2_FIELD_NONE:
 		vnmc = VNMC_IM_ODD_EVEN;
 		progressive = true;
@@ -839,15 +841,23 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
 	struct rvin_buffer *buf;
 	struct vb2_v4l2_buffer *vbuf;
 	dma_addr_t phys_addr;
+	int prev;
 
 	/* A already populated slot shall never be overwritten. */
 	if (WARN_ON(vin->buf_hw[slot].buffer != NULL))
 		return;
 
-	vin_dbg(vin, "Filling HW slot: %d\n", slot);
+	prev = (slot == 0 ? HW_BUFFER_NUM : slot) - 1;
 
-	if (list_empty(&vin->buf_list)) {
+	if (vin->buf_hw[prev].type == HALF_TOP) {
+		vbuf = vin->buf_hw[prev].buffer;
+		vin->buf_hw[slot].buffer = vbuf;
+		vin->buf_hw[slot].type = HALF_BOTTOM;
+		phys_addr = vin->buf_hw[prev].phys + vin->format.sizeimage /
+			(vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 4 : 2);
+	} else if (list_empty(&vin->buf_list)) {
 		vin->buf_hw[slot].buffer = NULL;
+		vin->buf_hw[slot].type = FULL;
 		phys_addr = vin->scratch_phys;
 	} else {
 		/* Keep track of buffer we give to HW */
@@ -856,10 +866,18 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
 		list_del_init(to_buf_list(vbuf));
 		vin->buf_hw[slot].buffer = vbuf;
 
+		vin->buf_hw[slot].type =
+			V4L2_FIELD_IS_SEQUENTIAL(vin->format.field) ?
+			HALF_TOP : FULL;
+
 		/* Setup DMA */
 		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
 	}
 
+	vin_dbg(vin, "Filling HW slot: %d type: %d buffer: %p\n",
+		slot, vin->buf_hw[slot].type, vin->buf_hw[slot].buffer);
+
+	vin->buf_hw[slot].phys = phys_addr;
 	rvin_set_slot_addr(vin, slot, phys_addr);
 }
 
@@ -867,6 +885,11 @@ static int rvin_capture_start(struct rvin_dev *vin)
 {
 	int slot, ret;
 
+	for (slot = 0; slot < HW_BUFFER_NUM; slot++) {
+		vin->buf_hw[slot].buffer = NULL;
+		vin->buf_hw[slot].type = FULL;
+	}
+
 	for (slot = 0; slot < HW_BUFFER_NUM; slot++)
 		rvin_fill_hw_slot(vin, slot);
 
@@ -951,6 +974,16 @@ static irqreturn_t rvin_irq(int irq, void *data)
 
 	/* Capture frame */
 	if (vin->buf_hw[slot].buffer) {
+		/*
+		 * Nothing to do but refill the hardware slot if
+		 * capture only filled first half of vb2 buffer.
+		 */
+		if (vin->buf_hw[slot].type == HALF_TOP) {
+			vin->buf_hw[slot].buffer = NULL;
+			rvin_fill_hw_slot(vin, slot);
+			goto done;
+		}
+
 		vin->buf_hw[slot].buffer->field =
 			rvin_get_active_field(vin, vnms);
 		vin->buf_hw[slot].buffer->sequence = vin->sequence;
@@ -978,14 +1011,22 @@ static void return_all_buffers(struct rvin_dev *vin,
 			       enum vb2_buffer_state state)
 {
 	struct rvin_buffer *buf, *node;
-	int i;
+	struct vb2_v4l2_buffer *freed[HW_BUFFER_NUM];
+	unsigned int i, n;
 
 	for (i = 0; i < HW_BUFFER_NUM; i++) {
-		if (vin->buf_hw[i].buffer) {
-			vb2_buffer_done(&vin->buf_hw[i].buffer->vb2_buf,
-					state);
-			vin->buf_hw[i].buffer = NULL;
+		freed[i] = vin->buf_hw[i].buffer;
+		vin->buf_hw[i].buffer = NULL;
+
+		for (n = 0; n < i; n++) {
+			if (freed[i] == freed[n]) {
+				freed[i] = NULL;
+				break;
+			}
 		}
+
+		if (freed[i])
+			vb2_buffer_done(&freed[i]->vb2_buf, state);
 	}
 
 	list_for_each_entry_safe(buf, node, &vin->buf_list, list) {
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 431ee01b0ee33e84..a01d5b6dcd116d60 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -90,7 +90,10 @@ static u32 rvin_format_bytesperline(struct rvin_dev *vin,
 	if (WARN_ON(!fmt))
 		return -EINVAL;
 
-	align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
+	if (V4L2_FIELD_IS_SEQUENTIAL(pix->field))
+		align = 0x80;
+	else
+		align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
 
 	return ALIGN(pix->width, align) * fmt->bpp;
 }
@@ -118,6 +121,8 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 	case V4L2_FIELD_INTERLACED_BT:
 	case V4L2_FIELD_INTERLACED:
 	case V4L2_FIELD_ALTERNATE:
+	case V4L2_FIELD_SEQ_TB:
+	case V4L2_FIELD_SEQ_BT:
 		break;
 	default:
 		pix->field = RVIN_DEFAULT_FIELD;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 9031fe7f569b908e..8d48894bc49e4db6 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -60,6 +60,23 @@ enum rvin_dma_state {
 	STOPPING,
 };
 
+/**
+ * enum rvin_buffer_type
+ *
+ * Describes how a buffer is given to the hardware. To be able
+ * to capture SEQ_TB/BT it's needed to capture to the same vb2
+ * buffer twice so the type of buffer needs to be kept.
+ *
+ * FULL - One capture fills the whole vb2 buffer
+ * HALF_TOP- One capture fills the top half of the vb2 buffer
+ * HALF_BOTTOM - One capture fills the bottom half of the vb2 buffer
+ */
+enum rvin_buffer_type {
+	FULL,
+	HALF_TOP,
+	HALF_BOTTOM,
+};
+
 /**
  * struct rvin_video_format - Data format stored in memory
  * @fourcc:	Pixelformat
@@ -204,6 +221,8 @@ struct rvin_dev {
 	spinlock_t qlock;
 	struct {
 		struct vb2_v4l2_buffer *buffer;
+		enum rvin_buffer_type type;
+		dma_addr_t phys;
 	} buf_hw[HW_BUFFER_NUM];
 	struct list_head buf_list;
 	unsigned int sequence;
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
  2019-09-05 21:49 ` [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
@ 2019-09-06 10:23   ` Sergei Shtylyov
  0 siblings, 0 replies; 4+ messages in thread
From: Sergei Shtylyov @ 2019-09-06 10:23 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media; +Cc: linux-renesas-soc

On 06.09.2019 0:49, Niklas Söderlund wrote:

> The hardware do not support capturing the field types V4L2_FIELD_SEQ_TB

    s/do/does/. Just one typo. :-)

> and V4L2_FIELD_SEQ_BT. To capture in these formats the driver needs to
> adjust the offset of the capture buffer and capture twice to each vb2
> buffer.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[...]

MBR, Sergei

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-09-06 10:24 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-05 21:49 [PATCH 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
2019-09-05 21:49 ` [PATCH 1/2] rcar-vin: Move hardware buffer tracking to own struct Niklas Söderlund
2019-09-05 21:49 ` [PATCH 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
2019-09-06 10:23   ` Sergei Shtylyov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).