From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Eddie James <eajames@linux.ibm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org, linux-media@vger.kernel.org,
openbmc@lists.ozlabs.org,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH -next v2 1/2] media: aspeed: refine hsync/vsync polarity setting logic
Date: Fri, 13 Sep 2019 11:11:04 -0700 [thread overview]
Message-ID: <20190913181105.11836-2-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20190913181105.11836-1-jae.hyun.yoo@linux.intel.com>
To prevent inaccurate detections of resolution, this commit enables
clearing of hsync/vsync polarity bits based on probed sync state.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
Changes since v1:
* Updated commit message.
drivers/media/platform/aspeed-video.c | 43 +++++++++++++--------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index eb12f3793062..8f77079da55a 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -614,7 +614,7 @@ static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
int i;
int hsync_counter = 0;
int vsync_counter = 0;
- u32 sts;
+ u32 sts, ctrl;
for (i = 0; i < NUM_POLARITY_CHECKS; ++i) {
sts = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
@@ -629,30 +629,29 @@ static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
hsync_counter++;
}
- if (hsync_counter < 0 || vsync_counter < 0) {
- u32 ctrl = 0;
+ ctrl = aspeed_video_read(video, VE_CTRL);
- if (hsync_counter < 0) {
- ctrl = VE_CTRL_HSYNC_POL;
- video->detected_timings.polarities &=
- ~V4L2_DV_HSYNC_POS_POL;
- } else {
- video->detected_timings.polarities |=
- V4L2_DV_HSYNC_POS_POL;
- }
-
- if (vsync_counter < 0) {
- ctrl = VE_CTRL_VSYNC_POL;
- video->detected_timings.polarities &=
- ~V4L2_DV_VSYNC_POS_POL;
- } else {
- video->detected_timings.polarities |=
- V4L2_DV_VSYNC_POS_POL;
- }
+ if (hsync_counter < 0) {
+ ctrl |= VE_CTRL_HSYNC_POL;
+ video->detected_timings.polarities &=
+ ~V4L2_DV_HSYNC_POS_POL;
+ } else {
+ ctrl &= ~VE_CTRL_HSYNC_POL;
+ video->detected_timings.polarities |=
+ V4L2_DV_HSYNC_POS_POL;
+ }
- if (ctrl)
- aspeed_video_update(video, VE_CTRL, 0, ctrl);
+ if (vsync_counter < 0) {
+ ctrl |= VE_CTRL_VSYNC_POL;
+ video->detected_timings.polarities &=
+ ~V4L2_DV_VSYNC_POS_POL;
+ } else {
+ ctrl &= ~VE_CTRL_VSYNC_POL;
+ video->detected_timings.polarities |=
+ V4L2_DV_VSYNC_POS_POL;
}
+
+ aspeed_video_write(video, VE_CTRL, ctrl);
}
static bool aspeed_video_alloc_buf(struct aspeed_video *video,
--
2.23.0
next prev parent reply other threads:[~2019-09-13 18:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-13 18:11 [PATCH -next v2 0/2] media: aspeed: refine mode detection flow Jae Hyun Yoo
2019-09-13 18:11 ` Jae Hyun Yoo [this message]
2019-10-09 13:54 ` [PATCH -next v2 1/2] media: aspeed: refine hsync/vsync polarity setting logic Eddie James
2019-09-13 18:11 ` [PATCH -next v2 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection Jae Hyun Yoo
2019-10-09 13:55 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190913181105.11836-2-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=andrew@aj.id.au \
--cc=eajames@linux.ibm.com \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).