linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
	robh+dt@kernel.org, laurent.pinchart@ideasonboard.com
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
	linux-media@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: [PATCH v11 12/15] media: dt-bindings: tvp5150: cleanup bindings stlye
Date: Mon, 30 Sep 2019 11:38:57 +0200	[thread overview]
Message-ID: <20190930093900.16524-13-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20190930093900.16524-1-m.felsch@pengutronix.de>

Use underlines to highlight optional and required properties. This is
quite common for all bindings. Align descriptions and start sentence
with uppercase letter. Also reword the usage of the required
endpoint properties for the output port in case BT.656 should be used.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/media/i2c/tvp5150.txt | 30 +++++++++++--------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
index 28b64ad149ef..cc98b38c7e73 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
@@ -5,12 +5,14 @@ The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
 with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
 
 Required Properties:
-- compatible: value must be "ti,tvp5150"
-- reg: I2C slave address
+====================
+- compatible:	Value must be "ti,tvp5150".
+- reg:		I2C slave address.
 
 Optional Properties:
-- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
-- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
+====================
+- pdn-gpios:	Phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios:	Phandle for the GPIO connected to the RESETB pin, if any.
 
 The device node must contain one 'port' child node per device physical input
 and output port, in accordance with the video interface bindings defined in
@@ -24,9 +26,8 @@ are numbered as follows
 	  Y-OUT		src		2
 
 The device node must contain at least one sink port and the src port. Each input
-port must be linked to an endpoint defined in
-Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt. The
-port/connector layout is as follows
+port must be linked to an endpoint defined in [1]. The port/connector layout is
+as follows
 
 tvp-5150 port@0 (AIP1A)
 	endpoint@0 -----------> Comp0-Con  port
@@ -38,14 +39,17 @@ tvp-5150 port@2
 	endpoint (video bitstream output at YOUT[0-7] parallel bus)
 
 Required Endpoint Properties for parallel synchronization on output port:
+=========================================================================
 
-- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
-- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
-- field-even-active: field signal level during the even field data
-  transmission. Must be <0>.
+- hsync-active:		Active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active:		Active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active:	Field signal level during the even field data
+			transmission. Must be <0>.
 
-If none of hsync-active, vsync-active and field-even-active is specified,
-the endpoint is assumed to use embedded BT.656 synchronization.
+Note: Do not specify any of these properties if you want to use the embedded
+      BT.656 synchronization.
+
+[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt.
 
 Example - three input sources:
 
-- 
2.20.1


  parent reply	other threads:[~2019-09-30  9:39 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-30  9:38 [PATCH v11 00/15] TVP5150 Features and fixes Marco Felsch
2019-09-30  9:38 ` [PATCH v11 01/15] dt-bindings: connector: analog: add sdtv standards property Marco Felsch
2019-09-30  9:38 ` [PATCH v11 02/15] media: v4l: link dt-bindings and uapi Marco Felsch
2019-09-30  9:38 ` [PATCH v11 03/15] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-09-30  9:38 ` [PATCH v11 04/15] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-11-15 23:34   ` Sakari Ailus
2019-11-19 11:37     ` Marco Felsch
2019-11-27  8:17       ` Marco Felsch
2020-01-08 15:36     ` Marco Felsch
2020-01-09  7:07       ` Marco Felsch
2020-01-15 17:06     ` Marco Felsch
2020-02-18 12:18       ` Sakari Ailus
2019-09-30  9:38 ` [PATCH v11 05/15] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2019-09-30  9:38 ` [PATCH v11 06/15] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-09-30  9:38 ` [PATCH v11 07/15] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-09-30  9:38 ` [PATCH v11 08/15] media: tvp5150: fix set_selection rectangle handling Marco Felsch
2019-09-30  9:38 ` [PATCH v11 09/15] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-09-30  9:38 ` [PATCH v11 10/15] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-09-30  9:38 ` [PATCH v11 11/15] media: tvp5150: add s_power callback Marco Felsch
2019-10-24 11:59   ` Sakari Ailus
2019-11-08 10:25     ` Marco Felsch
2019-11-08 10:38       ` Sakari Ailus
2019-09-30  9:38 ` Marco Felsch [this message]
2019-09-30  9:38 ` [PATCH v11 13/15] media: dt-bindings: tvp5150: add optional sdtv standards documentation Marco Felsch
2019-09-30  9:38 ` [PATCH v11 14/15] media: tvp5150: add support to limit sdtv standards Marco Felsch
2019-09-30  9:39 ` [PATCH v11 15/15] media: tvp5150: make debug output more readable Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190930093900.16524-13-m.felsch@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).