[PATCH 1/3] media: digitv: don't continue if remote control state can't be read

[PATCH 1/3] media: digitv: don't continue if remote control state can't be read

[Sean Young]

This results in an uninitialised variable read.

Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/usb/dvb-usb/digitv.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index dd5bb230cec1..99a39339d45d 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -230,18 +230,22 @@ static struct rc_map_table rc_map_digitv_table[] = {
 
 static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	int i;
+	int ret, i;
 	u8 key[5];
 	u8 b[4] = { 0 };
 
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4);
+	ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, &key[1], 4);
+	if (ret)
+		return ret;
 
 	/* Tell the device we've read the remote. Not sure how necessary
 	   this is, but the Nebula SDK does it. */
-	digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+	ret = digitv_ctrl_msg(d, USB_WRITE_REMOTE, 0, b, 4, NULL, 0);
+	if (ret)
+		return ret;
 
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)
-- 
2.23.0

[PATCH 2/3] media: af9005: uninitialized variable printked

[Sean Young]

If usb_bulk_msg() fails, actual_length can be uninitialized.

Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/usb/dvb-usb/af9005.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index ac93e88d7038..89b4b5d84cdf 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -554,7 +554,7 @@ static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
 			      u8 *buf, int size)
 {
 	u16 checksum;
-	int act_len, i, ret;
+	int act_len = 0, i, ret;
 
 	memset(buf, 0, size);
 	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
-- 
2.23.0

[PATCH 3/3] media: vp7045: do not read uninitialized values if usb transfer fails

[Sean Young]

If reading the mac address or the remote control decoder state fails,
then this is not a fatal error.

Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/usb/dvb-usb/vp7045.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c
index 80c1cf05384b..2baf57216d19 100644
--- a/drivers/media/usb/dvb-usb/vp7045.c
+++ b/drivers/media/usb/dvb-usb/vp7045.c
@@ -96,10 +96,14 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
 
 static int vp7045_rc_query(struct dvb_usb_device *d)
 {
+	int ret;
 	u8 key;
-	vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20);
 
-	deb_rc("remote query key: %x %d\n",key,key);
+	ret = vp7045_usb_op(d, RC_VAL_READ, NULL, 0, &key, 1, 20);
+	if (ret)
+		return ret;
+
+	deb_rc("remote query key: %x\n", key);
 
 	if (key != 0x44) {
 		/*
@@ -115,15 +119,18 @@ static int vp7045_rc_query(struct dvb_usb_device *d)
 
 static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset)
 {
-	int i = 0;
-	u8 v,br[2];
+	int i, ret;
+	u8 v, br[2];
 	for (i=0; i < len; i++) {
 		v = offset + i;
-		vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5);
+		ret = vp7045_usb_op(d, GET_EE_VALUE, &v, 1, br, 2, 5);
+		if (ret)
+			return ret;
+
 		buf[i] = br[1];
 	}
-	deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i);
-	debug_dump(buf,i,deb_info);
+	deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ", offset, i);
+	debug_dump(buf, i, deb_info);
 	return 0;
 }
 
-- 
2.23.0