From: Neil Armstrong <narmstrong@baylibre.com>
To: mjourdan@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-media@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] media: meson: vdec: add sm1 platform
Date: Thu, 21 Nov 2019 11:14:26 +0100 [thread overview]
Message-ID: <20191121101429.23831-1-narmstrong@baylibre.com> (raw)
This patchset adds support for the current Amlogic Video Decoder
driver for the Amlogic SM1 & compatible SoCs.
Then support is added for the currently supported MPEG1 & MPEG2 decoders
like for G12A support.
This patchset depends on G12A support patchset at [1].
M2M Decoder compliance is handled in a separate patchset at [2].
# v4l2-compliance
v4l2-compliance SHA: 7ead0e1856b89f2e19369af452bb03fd0cd16793, 64 bits
Compliance test for meson-vdec device /dev/video0:
Driver Info:
Driver name : meson-vdec
Card type : Amlogic Video Decoder
Bus info : platform:meson-vdec
Driver version : 5.4.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for meson-vdec device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0
[1] https://lore.kernel.org/linux-media/20191120111430.29552-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/linux-media/20191007145909.29979-1-mjourdan@baylibre.com
Neil Armstrong (3):
dt-bindings: media: amlogic,gx-vdec: add bindings for SM1 family
media: meson: vdec: add sm1 platform
arm64: dts: meson-sm1: add video decoder compatible
.../bindings/media/amlogic,gx-vdec.yaml | 2 ++
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 +++
drivers/staging/media/meson/vdec/vdec.c | 5 +++-
drivers/staging/media/meson/vdec/vdec_1.c | 29 ++++++++++++++----
.../staging/media/meson/vdec/vdec_platform.c | 30 +++++++++++++++++++
.../staging/media/meson/vdec/vdec_platform.h | 2 ++
6 files changed, 65 insertions(+), 7 deletions(-)
--
2.22.0
next reply other threads:[~2019-11-21 10:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 10:14 Neil Armstrong [this message]
2019-11-21 10:14 ` [PATCH 1/3] dt-bindings: media: amlogic,gx-vdec: add bindings for SM1 family Neil Armstrong
2019-12-04 19:27 ` Rob Herring
2019-11-21 10:14 ` [PATCH 2/3] media: meson: vdec: add sm1 platform Neil Armstrong
2019-11-21 10:14 ` [PATCH 3/3] arm64: dts: meson-sm1: add video decoder compatible Neil Armstrong
2019-12-13 16:53 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191121101429.23831-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mjourdan@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).