Linux-Media Archive on
 help / color / Atom feed
From: "Niklas Söderlund" <>
To: Laurent Pinchart <>,
	"Niklas Söderlund" <>
Subject: [PATCH v2] rcar-vin: Use correct pixel format when aligning format
Date: Wed,  4 Dec 2019 18:57:59 +0100
Message-ID: <> (raw)

When aligning the format the pixel format that is being processed shall
be used to figure out alignment constraints, not the currently active
pixel format. The alignment might be part of a try operation and shall
not be effected by the active format. Fix this by looking at the correct
pixel format.

Signed-off-by: Niklas Söderlund <>
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 62d308a4ddaee82e..339cb2de111de166 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -149,7 +149,7 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 	/* HW limit width to a multiple of 32 (2^5) for NV12/16 else 2 (2^1) */
-	switch (vin->format.pixelformat) {
+	switch (pix->pixelformat) {
 	case V4L2_PIX_FMT_NV12:
 	case V4L2_PIX_FMT_NV16:
 		walign = 5;

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-04 17:57 Niklas Söderlund [this message]
2019-12-05  8:52 ` Laurent Pinchart

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on

Archives are clonable:
	git clone --mirror linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ \
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone