From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: mchehab@kernel.org, robh+dt@kernel.org
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
dave.stevenson@raspberrypi.com, peter.griffin@linaro.org
Subject: [PATCH 0/2] Add IMX219 CMOS image sensor support
Date: Wed, 11 Dec 2019 14:54:39 +0300 [thread overview]
Message-ID: <20191211115441.10637-1-andrey.konovalov@linaro.org> (raw)
This patchset adds support for IMX290 CMOS image sensor from Sony.
Sony IMX219 is an 8MPix, 1/4.0-inch CMOS active pixel digital image sensor
with an active array size of 3280H x 2464V. It is programmable through
I2C interface. Image data are sent through MIPI CSI-2, which can be configured
as either 2 or 4 data lanes, but this driver currently only supports 2 lanes.
The currently supported resolutions are 3280x2464 @ 15fps, 1920x1080 @ 30fps
(cropped FOV), and 1640x1232 (2x2 binned) @ 30fps.
The driver has been tested with Raspberry Pi Camera Module v2 connected to
Raspberry Pi Zero W.
Thanks,
Andrey
Andrey Konovalov (1):
dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor
.../devicetree/bindings/media/i2c/imx219.yaml | 112 ++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1248 ++++++++++++++++++++
5 files changed, 1381 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 drivers/media/i2c/imx219.c
next reply other threads:[~2019-12-11 11:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 11:54 Andrey Konovalov [this message]
2019-12-11 11:54 ` [PATCH 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding Andrey Konovalov
2019-12-19 21:00 ` Rob Herring
2019-12-11 11:54 ` [PATCH 2/2] media: i2c: Add driver for Sony IMX219 sensor Andrey Konovalov
2019-12-14 5:52 ` Ezequiel Garcia
2019-12-18 22:29 ` Andrey Konovalov
2019-12-19 15:36 ` Dave Stevenson
2019-12-20 17:15 ` Andrey Konovalov
2019-12-19 15:53 ` Ezequiel Garcia
2019-12-20 17:28 ` Andrey Konovalov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211115441.10637-1-andrey.konovalov@linaro.org \
--to=andrey.konovalov@linaro.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=peter.griffin@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).