From: Jungo Lin <jungo.lin@mediatek.com>
To: <tfiga@chromium.org>, <hverkuil-cisco@xs4all.nl>,
<laurent.pinchart@ideasonboard.com>, <matthias.bgg@gmail.com>,
<mchehab@kernel.org>
Cc: <linux-media@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <srv_heupstream@mediatek.com>,
<ddavenport@chromium.org>, <robh@kernel.org>,
<Sean.Cheng@mediatek.com>, <sj.huang@mediatek.com>,
<frederic.chen@mediatek.com>, <Jerry-ch.Chen@mediatek.com>,
<frankie.chiu@mediatek.com>, <ryan.yu@mediatek.com>,
<Rynn.Wu@mediatek.com>, <yuzhao@chromium.org>,
<zwisler@chromium.org>, <shik@chromium.org>,
<suleiman@chromium.org>, <jungo.lin@mediatek.com>
Subject: [v6, 2/5] dts: arm64: mt8183: Add ISP Pass 1 nodes
Date: Thu, 19 Dec 2019 13:49:27 +0800 [thread overview]
Message-ID: <20191219054930.29513-3-jungo.lin@mediatek.com> (raw)
In-Reply-To: <20191219054930.29513-1-jungo.lin@mediatek.com>
Add nodes for Pass 1 unit of Mediatek's camera ISP system.
Pass 1 unit embedded in Mediatek SoCs, works with the
co-processor to process image signal from the image sensor
and output RAW image data.
Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
---
Changes from v6:
- Add port node description in the device tree by Tomasz Figa.
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 38 ++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 10b32471bc7b..7a5349371b9f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -641,5 +641,43 @@
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
};
+
+ camisp: camisp@1a000000 {
+ compatible = "mediatek,mt8183-camisp";
+ reg = <0 0x1a000000 0 0x1000>,
+ <0 0x1a003000 0 0x1000>,
+ <0 0x1a004000 0 0x2000>,
+ <0 0x1a006000 0 0x2000>,
+ <0 0x1a008000 0 0x2000>;
+ reg-names = "cam_sys",
+ "cam_uni",
+ "cam_a",
+ "cam_b",
+ "cam_c";
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "cam_uni",
+ "cam_a",
+ "cam_b",
+ "cam_c";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ clocks = <&camsys CLK_CAM_CAM>,
+ <&camsys CLK_CAM_CAMTG>;
+ clock-names = "camsys_cam_cgpdn",
+ "camsys_camtg_cgpdn";
+ mediatek,larb = <&larb3>,
+ <&larb6>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+ mediatek,scp = <&scp>;
+
+ port {
+ camisp_endpoint: endpoint {
+ remote-endpoint = <&seninf_camisp_endpoint>;
+ };
+ };
+ };
+ };
};
};
--
2.18.0
next prev parent reply other threads:[~2019-12-19 5:50 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Jungo Lin <jungo.lin@mediatek.com>
2019-04-02 10:04 ` [PATCH v1] media: media_device_enum_links32: fix missing reserved field copy Jungo Lin
2019-04-02 11:33 ` Laurent Pinchart
2019-04-03 0:30 ` Jungo Lin
2019-04-03 1:44 ` [PATCH] media: media_device_enum_links32: clean a reserved field Jungo Lin
2019-05-10 1:57 ` [RFC,V2,00/11] meida: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-05-10 1:57 ` [RFC,V2,01/11] dt-bindings: mt8183: Add binding for ISP Pass 1 reserved memory Jungo Lin
2019-05-14 19:50 ` Rob Herring
2019-05-15 13:02 ` Jungo Lin
2019-05-10 1:57 ` [RFC,V2,02/11] dts: arm64: mt8183: Add ISP Pass 1 shared memory node Jungo Lin
2019-05-10 1:57 ` [RFC,V2,03/11] dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-05-14 19:54 ` Rob Herring
2019-05-16 6:12 ` Jungo Lin
2019-05-10 1:57 ` [RFC,V2,04/11] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-05-10 1:57 ` [RFC,V2,05/11] media: platform: Add Mediatek ISP Pass 1 driver Kconfig Jungo Lin
2019-05-10 1:57 ` [RFC,V2,06/11] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-05-13 8:35 ` Hans Verkuil
2019-05-15 12:49 ` [RFC, V2, 06/11] " Jungo Lin
2019-05-10 1:58 ` [RFC,V2,07/11] media: platform: Add Mediatek ISP P1 private control Jungo Lin
2019-05-13 8:46 ` Hans Verkuil
2019-05-14 6:23 ` Jungo Lin
2019-10-02 10:55 ` Sakari Ailus
2019-10-02 11:02 ` Sakari Ailus
2019-05-10 1:58 ` [RFC,V2,08/11] media: platform: Add Mediatek ISP P1 V4L2 functions Jungo Lin
2019-05-24 18:49 ` Drew Davenport
2019-05-28 1:00 ` Jungo Lin
2019-05-10 1:58 ` [RFC,V2,09/11] media: platform: Add Mediatek ISP P1 device driver Jungo Lin
2019-05-24 21:19 ` Drew Davenport
2019-05-27 13:07 ` [RFC, V2, 09/11] " Jungo Lin
2019-05-10 1:58 ` [RFC,V2,10/11] media: platform: Add Mediatek ISP P1 SCP communication Jungo Lin
2019-05-10 1:58 ` [RFC,V2,11/11] media: platform: Add Mediatek ISP P1 shared memory device Jungo Lin
2019-08-07 12:47 ` [RFC,v4,0/4] media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-08-07 12:48 ` [RFC,v4,1/4] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-08-21 19:47 ` Rob Herring
2019-08-22 12:47 ` Jungo Lin
2019-08-21 20:17 ` Rob Herring
2019-08-22 12:48 ` Jungo Lin
2019-08-07 12:48 ` [RFC,v4,2/4] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-08-07 12:48 ` [RFC,v4,3/4] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-08-07 12:48 ` [RFC,v4,4/4] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2019-09-02 7:51 ` [RFC,v5,0/5] media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 1/5] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-09-02 15:17 ` Rob Herring
2019-09-02 7:51 ` [RFC,v5, 2/5] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 3/5] media: videodev2.h: Add new boottime timestamp type Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 4/5] media: pixfmt: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 5/5] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2019-12-19 5:49 ` [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-12-19 5:49 ` [v6, 1/5] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2020-03-31 15:34 ` Helen Koike
2020-04-10 10:04 ` Jungo Lin
2019-12-19 5:49 ` Jungo Lin [this message]
2019-12-19 5:49 ` [v6, 3/5] media: videodev2.h: Add new boottime timestamp type Jungo Lin
2020-01-07 14:10 ` Hans Verkuil
[not found] ` <e833b88ba74945c495a102c98cd54725@mtkmbs07n1.mediatek.inc>
2020-01-10 9:59 ` Jungo Lin
2020-01-10 10:08 ` Jungo Lin
2019-12-19 5:49 ` [v6, 4/5] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2020-04-03 2:30 ` Laurent Pinchart
2020-04-10 10:00 ` Jungo Lin
2019-12-19 5:49 ` [v6, 5/5] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2020-01-23 13:59 ` Hans Verkuil
2020-01-28 2:13 ` Jungo Lin
2020-03-31 15:34 ` Helen Koike
2020-04-09 2:05 ` Jungo Lin
2020-04-14 12:25 ` Helen Koike
[not found] ` <b2c30e560e9b4ec488957ca62bae09fe@mtkmbs01n2.mediatek.inc>
2020-05-04 12:27 ` Jungo Lin
2020-05-05 15:38 ` Helen Koike
2020-04-02 16:45 ` Dafna Hirschfeld
2020-04-09 2:49 ` Jungo Lin
2020-03-31 15:34 ` [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Helen Koike
2020-04-10 10:32 ` Jungo Lin
2020-04-14 12:25 ` Helen Koike
[not found] ` <1fd3615eb18f48ada186bfe228fc907b@mtkmbs01n2.mediatek.inc>
2020-05-04 12:40 ` Jungo Lin
2020-05-05 15:30 ` Helen Koike
2020-05-05 16:18 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219054930.29513-3-jungo.lin@mediatek.com \
--to=jungo.lin@mediatek.com \
--cc=Jerry-ch.Chen@mediatek.com \
--cc=Rynn.Wu@mediatek.com \
--cc=Sean.Cheng@mediatek.com \
--cc=ddavenport@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=frankie.chiu@mediatek.com \
--cc=frederic.chen@mediatek.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=ryan.yu@mediatek.com \
--cc=shik@chromium.org \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=suleiman@chromium.org \
--cc=tfiga@chromium.org \
--cc=yuzhao@chromium.org \
--cc=zwisler@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).