Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 4.19 005/252] media: i2c: adv748x: Fix unsafe macros
       [not found] <20200214161147.15842-1-sashal@kernel.org>
@ 2020-02-14 16:07 ` Sasha Levin
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 015/252] media: i2c: mt9v032: fix enum mbus codes and frame sizes Sasha Levin
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:07 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Gustavo A. R. Silva, Dmitry Vyukov, Kieran Bingham, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin, linux-media,
	clang-built-linux

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 0d962e061abcf1b9105f88fb850158b5887fbca3 ]

Enclose multiple macro parameters in parentheses in order to
make such macros safer and fix the Clang warning below:

drivers/media/i2c/adv748x/adv748x-afe.c:452:12: warning: operator '?:'
has lower precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]

ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK, enable
? ctrl->val - 1 : 0);

Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/adv748x/adv748x.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 1cf46c401664d..9cc5672e4148a 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -361,10 +361,10 @@ int adv748x_write_block(struct adv748x_state *state, int client_page,
 
 #define io_read(s, r) adv748x_read(s, ADV748X_PAGE_IO, r)
 #define io_write(s, r, v) adv748x_write(s, ADV748X_PAGE_IO, r, v)
-#define io_clrset(s, r, m, v) io_write(s, r, (io_read(s, r) & ~m) | v)
+#define io_clrset(s, r, m, v) io_write(s, r, (io_read(s, r) & ~(m)) | (v))
 
 #define hdmi_read(s, r) adv748x_read(s, ADV748X_PAGE_HDMI, r)
-#define hdmi_read16(s, r, m) (((hdmi_read(s, r) << 8) | hdmi_read(s, r+1)) & m)
+#define hdmi_read16(s, r, m) (((hdmi_read(s, r) << 8) | hdmi_read(s, (r)+1)) & (m))
 #define hdmi_write(s, r, v) adv748x_write(s, ADV748X_PAGE_HDMI, r, v)
 
 #define repeater_read(s, r) adv748x_read(s, ADV748X_PAGE_REPEATER, r)
@@ -372,11 +372,11 @@ int adv748x_write_block(struct adv748x_state *state, int client_page,
 
 #define sdp_read(s, r) adv748x_read(s, ADV748X_PAGE_SDP, r)
 #define sdp_write(s, r, v) adv748x_write(s, ADV748X_PAGE_SDP, r, v)
-#define sdp_clrset(s, r, m, v) sdp_write(s, r, (sdp_read(s, r) & ~m) | v)
+#define sdp_clrset(s, r, m, v) sdp_write(s, r, (sdp_read(s, r) & ~(m)) | (v))
 
 #define cp_read(s, r) adv748x_read(s, ADV748X_PAGE_CP, r)
 #define cp_write(s, r, v) adv748x_write(s, ADV748X_PAGE_CP, r, v)
-#define cp_clrset(s, r, m, v) cp_write(s, r, (cp_read(s, r) & ~m) | v)
+#define cp_clrset(s, r, m, v) cp_write(s, r, (cp_read(s, r) & ~(m)) | (v))
 
 #define txa_read(s, r) adv748x_read(s, ADV748X_PAGE_TXA, r)
 #define txb_read(s, r) adv748x_read(s, ADV748X_PAGE_TXB, r)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 4.19 015/252] media: i2c: mt9v032: fix enum mbus codes and frame sizes
       [not found] <20200214161147.15842-1-sashal@kernel.org>
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 005/252] media: i2c: adv748x: Fix unsafe macros Sasha Levin
@ 2020-02-14 16:07 ` Sasha Levin
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 021/252] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run() Sasha Levin
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:07 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Eugen Hristev, Wenyou Yang, Laurent Pinchart, Sakari Ailus,
	Mauro Carvalho Chehab, Sasha Levin, linux-media

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]

This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).

[Sakari Ailus: rewrapped commit message]

Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/mt9v032.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index f74730d24d8fe..04788692c9ff4 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -431,10 +431,12 @@ static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev,
 				  struct v4l2_subdev_pad_config *cfg,
 				  struct v4l2_subdev_mbus_code_enum *code)
 {
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
 	if (code->index > 0)
 		return -EINVAL;
 
-	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	code->code = mt9v032->format.code;
 	return 0;
 }
 
@@ -442,7 +444,11 @@ static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev,
 				   struct v4l2_subdev_pad_config *cfg,
 				   struct v4l2_subdev_frame_size_enum *fse)
 {
-	if (fse->index >= 3 || fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
+	if (fse->index >= 3)
+		return -EINVAL;
+	if (mt9v032->format.code != fse->code)
 		return -EINVAL;
 
 	fse->min_width = MT9V032_WINDOW_WIDTH_DEF / (1 << fse->index);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 4.19 021/252] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()
       [not found] <20200214161147.15842-1-sashal@kernel.org>
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 005/252] media: i2c: adv748x: Fix unsafe macros Sasha Levin
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 015/252] media: i2c: mt9v032: fix enum mbus codes and frame sizes Sasha Levin
@ 2020-02-14 16:07 ` Sasha Levin
  2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 092/252] media: cx23885: Add support for AVerMedia CE310B Sasha Levin
  2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 095/252] media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:07 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jia-Ju Bai, Fabien Dessenne, Hans Verkuil, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
    msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
    bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
    _raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-hw.c b/drivers/media/platform/sti/bdisp/bdisp-hw.c
index 26d9fa7aeb5f2..d57f659d740a1 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-hw.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-hw.c
@@ -14,8 +14,8 @@
 #define MAX_SRC_WIDTH           2048
 
 /* Reset & boot poll config */
-#define POLL_RST_MAX            50
-#define POLL_RST_DELAY_MS       20
+#define POLL_RST_MAX            500
+#define POLL_RST_DELAY_MS       2
 
 enum bdisp_target_plan {
 	BDISP_RGB,
@@ -382,7 +382,7 @@ int bdisp_hw_reset(struct bdisp_dev *bdisp)
 	for (i = 0; i < POLL_RST_MAX; i++) {
 		if (readl(bdisp->regs + BLT_STA1) & BLT_STA1_IDLE)
 			break;
-		msleep(POLL_RST_DELAY_MS);
+		udelay(POLL_RST_DELAY_MS * 1000);
 	}
 	if (i == POLL_RST_MAX)
 		dev_err(bdisp->dev, "Reset timeout\n");
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 4.19 092/252] media: cx23885: Add support for AVerMedia CE310B
       [not found] <20200214161147.15842-1-sashal@kernel.org>
                   ` (2 preceding siblings ...)
  2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 021/252] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run() Sasha Levin
@ 2020-02-14 16:09 ` Sasha Levin
  2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 095/252] media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:09 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Forest Crossman, Hans Verkuil, Mauro Carvalho Chehab,
	Sasha Levin, linux-media

From: Forest Crossman <cyrozap@gmail.com>

[ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ]

The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.

I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't
  be recovered until the system is rebooted. I haven't been able to
  determine the cause of this behavior, nor have I found a solution to
  fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
  and some of the VBI data appears as noise at the top of the frame, but
  I assume that to be a result of my very noisy RF environment and the
  card's unshielded input traces rather than a configuration issue.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx23885/cx23885-cards.c | 24 +++++++++++++++++++++++
 drivers/media/pci/cx23885/cx23885-video.c |  3 ++-
 drivers/media/pci/cx23885/cx23885.h       |  1 +
 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index ed3210dc50bc2..642aefdbb7bb6 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -811,6 +811,25 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-Starburst2",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_AVERMEDIA_CE310B] = {
+		.name		= "AVerMedia CE310B",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_VIN1_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_NONE0_CH3,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_VIN8_CH1 |
+				  CX25840_NONE_CH2 |
+				  CX25840_VIN7_CH3 |
+				  CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -1134,6 +1153,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0xf02a,
 		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST2,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x3100,
+		.card      = CX23885_BOARD_AVERMEDIA_CE310B,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -2358,6 +2381,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_DVBSKY_T982:
 	case CX23885_BOARD_VIEWCAST_260E:
 	case CX23885_BOARD_VIEWCAST_460E:
+	case CX23885_BOARD_AVERMEDIA_CE310B:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index f8a3deadc77a1..2a20c7165e1e8 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -268,7 +268,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
 		(dev->board == CX23885_BOARD_MYGICA_X8507) ||
 		(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
 		(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
-		(dev->board == CX23885_BOARD_VIEWCAST_460E)) {
+		(dev->board == CX23885_BOARD_VIEWCAST_460E) ||
+		(dev->board == CX23885_BOARD_AVERMEDIA_CE310B)) {
 		/* Configure audio routing */
 		v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
 			INPUT(input)->amux, 0, 0);
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index cf965efabe666..7bbd62cc993ef 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -111,6 +111,7 @@
 #define CX23885_BOARD_HAUPPAUGE_STARBURST2     59
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
 #define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
+#define CX23885_BOARD_AVERMEDIA_CE310B         62
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 4.19 095/252] media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros
       [not found] <20200214161147.15842-1-sashal@kernel.org>
                   ` (3 preceding siblings ...)
  2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 092/252] media: cx23885: Add support for AVerMedia CE310B Sasha Levin
@ 2020-02-14 16:09 ` Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:09 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Nathan Chancellor, Ezequiel Garcia, Nick Desaulniers,
	Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin, linux-media,
	clang-built-linux

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit afb34781620274236bd9fc9246e22f6963ef5262 ]

When building with Clang + -Wtautological-constant-compare, several of
the ivtv and cx18 drivers warn along the lines of:

 drivers/media/pci/cx18/cx18-driver.c:1005:21: warning: converting the
 result of '<<' to a boolean always evaluates to true
 [-Wtautological-constant-compare]
                         cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
                                         ^
 drivers/media/pci/cx18/cx18-cards.h:18:37: note: expanded from macro
 'CX18_HW_GPIO_RESET_CTRL'
 #define CX18_HW_GPIO_RESET_CTRL         (1 << 6)
                                           ^
 1 warning generated.

This warning happens because the shift operation is implicitly converted
to a boolean in v4l2_device_mask_call_all before being negated. This can
be solved by just comparing the mask result to 0 explicitly so that
there is no boolean conversion. The ultimate goal is to enable
-Wtautological-compare globally because there are several subwarnings
that would be helpful to have.

For visual consistency and avoidance of these warnings in the future,
all of the implicitly boolean conversions in the v4l2_device macros
are converted to explicit ones as well.

Link: https://github.com/ClangBuiltLinux/linux/issues/752

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/media/v4l2-device.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index b330e4a08a6b8..40840fec337ca 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -372,7 +372,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 		struct v4l2_subdev *__sd;				\
 									\
 		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
-			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			(grpid) == 0 || __sd->grp_id == (grpid), o, f ,	\
 			##args);					\
 	} while (0)
 
@@ -404,7 +404,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 ({									\
 	struct v4l2_subdev *__sd;					\
 	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
-			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			(grpid) == 0 || __sd->grp_id == (grpid), o, f ,	\
 			##args);					\
 })
 
@@ -432,8 +432,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 		struct v4l2_subdev *__sd;				\
 									\
 		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
-			!(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,	\
-			##args);					\
+			(grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o,	\
+			f , ##args);					\
 	} while (0)
 
 /**
@@ -463,8 +463,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
 ({									\
 	struct v4l2_subdev *__sd;					\
 	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
-			!(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,	\
-			##args);					\
+			(grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o,	\
+			f , ##args);					\
 })
 
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200214161147.15842-1-sashal@kernel.org>
2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 005/252] media: i2c: adv748x: Fix unsafe macros Sasha Levin
2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 015/252] media: i2c: mt9v032: fix enum mbus codes and frame sizes Sasha Levin
2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 021/252] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run() Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 092/252] media: cx23885: Add support for AVerMedia CE310B Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 095/252] media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros Sasha Levin

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git