linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
	robh+dt@kernel.org, laurent.pinchart@ideasonboard.com
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
	linux-media@vger.kernel.org
Subject: [PATCH v12 11/19] media: tvp5150: add FORMAT_TRY support for get/set selection handlers
Date: Mon,  9 Mar 2020 11:14:20 +0100	[thread overview]
Message-ID: <20200309101428.15267-12-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20200309101428.15267-1-m.felsch@pengutronix.de>

Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is
no way to try different selections. The patch adds a helper function to
select the correct selection memory space (sub-device file handle or
driver state) which will be set/returned.

The selection rectangle is updated if the format is FORMAT_ACTIVE and
the rectangle position and/or size differs from the current set
rectangle.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changelog:
v11:
- s/__tvp5150_get_pad_crop/tvp5150_get_pad_crop/
- s/__tvp5150_set_selection/tvp5150_set_hw_selection/
- drop inline for tvp5150_set_hw_selection
- fix allignment issue

v10:
- __tvp5150_get_pad_crop: drop confusing fall-through
- set_selection: fix FORMAT_TRY handling if CONFIG_VIDEO_V4L2_SUBDEV_API
                 is disabled. Adapt sel->r and return 0.
v8:
- adapt commit message
- remove wrong FORMAT_TRY handling for tvp5150_fill_fmt() handling
- return 0 during set_selection if FORMAT_TRY was requested and
  CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
- return -EINVAL during get_selection if FORMAT_TRY was requested and
  CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
v7:
- __tvp5150_get_pad_crop(): return error on default case
- simplify __tvp5150_get_pad_crop() error handling
- tvp5150_set_selection() squash __tvp5150_set_selection() execution
  conditions
v6:
nothing
v5:
 - handle stub for v4l2_subdev_get_try_crop() internal since commit
   ("media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*")
   isn't anymore part of this series.
 - add error handling of __tvp5150_get_pad_crop()
v4:
 - fix merge conflict due to rebase on top of media-tree/master
 - __tvp5150_get_pad_crop(): cosmetic alignment fixes
---
 drivers/media/i2c/tvp5150.c | 113 ++++++++++++++++++++++++++----------
 1 file changed, 81 insertions(+), 32 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 38f02c23e352..e9fa473d61f3 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -19,6 +19,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-fwnode.h>
 #include <media/v4l2-mc.h>
+#include <media/v4l2-rect.h>
 
 #include "tvp5150_reg.h"
 
@@ -995,6 +996,25 @@ static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
 		crop->height = TVP5150_V_MAX_OTHERS;
 }
 
+static struct v4l2_rect *
+tvp5150_get_pad_crop(struct tvp5150 *decoder,
+		     struct v4l2_subdev_pad_config *cfg, unsigned int pad,
+		     enum v4l2_subdev_format_whence which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &decoder->rect;
+	case V4L2_SUBDEV_FORMAT_TRY:
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+		return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
+#else
+		return ERR_PTR(-EINVAL);
+#endif
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+}
+
 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 			    struct v4l2_subdev_pad_config *cfg,
 			    struct v4l2_subdev_format *format)
@@ -1019,17 +1039,51 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
+unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
+{
+	struct tvp5150 *decoder = to_tvp5150(sd);
+	v4l2_std_id std;
+
+	/* Calculate height based on current standard */
+	if (decoder->norm == V4L2_STD_ALL)
+		std = tvp5150_read_std(sd);
+	else
+		std = decoder->norm;
+
+	return (std & V4L2_STD_525_60) ?
+		TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
+}
+
+static void tvp5150_set_hw_selection(struct v4l2_subdev *sd,
+				     struct v4l2_rect *rect)
+{
+	struct tvp5150 *decoder = to_tvp5150(sd);
+	unsigned int hmax = tvp5150_get_hmax(sd);
+
+	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
+	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
+		     rect->top + rect->height - hmax);
+	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
+		     rect->left >> TVP5150_CROP_SHIFT);
+	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
+		     rect->left | (1 << TVP5150_CROP_SHIFT));
+	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
+		     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
+		     TVP5150_CROP_SHIFT);
+	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
+		     rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
+}
+
 static int tvp5150_set_selection(struct v4l2_subdev *sd,
 				 struct v4l2_subdev_pad_config *cfg,
 				 struct v4l2_subdev_selection *sel)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
 	struct v4l2_rect *rect = &sel->r;
-	v4l2_std_id std;
-	int hmax;
+	struct v4l2_rect *crop;
+	unsigned int hmax;
 
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
-	    sel->target != V4L2_SEL_TGT_CROP)
+	if (sel->target != V4L2_SEL_TGT_CROP)
 		return -EINVAL;
 
 	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -1038,17 +1092,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
 	/* tvp5150 has some special limits */
 	rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);
 	rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);
-
-	/* Calculate height based on current standard */
-	if (decoder->norm == V4L2_STD_ALL)
-		std = tvp5150_read_std(sd);
-	else
-		std = decoder->norm;
-
-	if (std & V4L2_STD_525_60)
-		hmax = TVP5150_V_MAX_525_60;
-	else
-		hmax = TVP5150_V_MAX_OTHERS;
+	hmax = tvp5150_get_hmax(sd);
 
 	/*
 	 * alignments:
@@ -1061,20 +1105,23 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
 			      hmax - TVP5150_MAX_CROP_TOP - rect->top,
 			      hmax - rect->top, 0, 0);
 
-	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
-	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
-		     rect->top + rect->height - hmax);
-	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
-		     rect->left >> TVP5150_CROP_SHIFT);
-	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
-		     rect->left | (1 << TVP5150_CROP_SHIFT));
-	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
-		     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
-		     TVP5150_CROP_SHIFT);
-	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
-		     rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
+	if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&
+	    sel->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	crop = tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
+	if (IS_ERR(crop))
+		return PTR_ERR(crop);
+
+	/*
+	 * Update output image size if the selection (crop) rectangle size or
+	 * position has been modified.
+	 */
+	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
+	    !v4l2_rect_equal(rect, crop))
+		tvp5150_set_hw_selection(sd, rect);
 
-	decoder->rect = *rect;
+	*crop = *rect;
 
 	return 0;
 }
@@ -1084,11 +1131,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
 				 struct v4l2_subdev_selection *sel)
 {
 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
+	struct v4l2_rect *crop;
 	v4l2_std_id std;
 
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
-		return -EINVAL;
-
 	switch (sel->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 		sel->r.left = 0;
@@ -1106,7 +1151,11 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
 			sel->r.height = TVP5150_V_MAX_OTHERS;
 		return 0;
 	case V4L2_SEL_TGT_CROP:
-		sel->r = decoder->rect;
+		crop = tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+					    sel->which);
+		if (IS_ERR(crop))
+			return PTR_ERR(crop);
+		sel->r = *crop;
 		return 0;
 	default:
 		return -EINVAL;
-- 
2.20.1


  parent reply	other threads:[~2020-03-09 10:15 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-09 10:14 [PATCH v12 00/19] TVP5150 Features and Fixes Marco Felsch
2020-03-09 10:14 ` [PATCH v12 01/19] dt-bindings: connector: analog: add sdtv standards property Marco Felsch
2020-03-09 10:14 ` [PATCH v12 02/19] dt-bindings: display: add sdtv-standards defines Marco Felsch
2020-03-09 10:14 ` [PATCH v12 03/19] media: v4l: link dt-bindings and uapi Marco Felsch
2020-03-09 10:14 ` [PATCH v12 04/19] media: v4l2-fwnode: add endpoint id field to v4l2_fwnode_link Marco Felsch
2020-03-11  8:15   ` Sakari Ailus
2020-03-11  8:39     ` Marco Felsch
2020-03-09 10:14 ` [PATCH v12 05/19] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2020-03-09 10:14 ` [PATCH v12 06/19] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2020-03-11  8:17   ` Sakari Ailus
2020-03-11  8:43     ` Marco Felsch
2020-03-11  9:03       ` Sakari Ailus
2020-03-11  9:12         ` Marco Felsch
2020-03-09 10:14 ` [PATCH v12 07/19] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2020-03-09 10:14 ` [PATCH v12 08/19] media: tvp5150: add input source selection of_graph support Marco Felsch
2020-03-09 10:14 ` [PATCH v12 09/19] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2020-03-09 10:14 ` [PATCH v12 10/19] media: tvp5150: fix set_selection rectangle handling Marco Felsch
2020-03-09 10:14 ` Marco Felsch [this message]
2020-03-09 10:14 ` [PATCH v12 12/19] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2020-03-09 10:14 ` [PATCH v12 13/19] media: tvp5150: move irq en-/disable into runtime-pm ops Marco Felsch
2020-03-09 10:14 ` [PATCH v12 14/19] media: tvp5150: add v4l2-event support Marco Felsch
2020-03-09 10:14 ` [PATCH v12 15/19] media: tvp5150: add subdev open/close callbacks Marco Felsch
2020-03-09 10:14 ` [PATCH v12 16/19] media: dt-bindings: tvp5150: cleanup bindings stlye Marco Felsch
2020-03-09 10:14 ` [PATCH v12 17/19] media: dt-bindings: tvp5150: add optional sdtv standards documentation Marco Felsch
2020-03-09 10:14 ` [PATCH v12 18/19] media: tvp5150: add support to limit sdtv standards Marco Felsch
2020-03-09 10:14 ` [PATCH v12 19/19] media: tvp5150: make debug output more readable Marco Felsch
2020-03-11  8:33 ` [PATCH v12 00/19] TVP5150 Features and Fixes Sakari Ailus
2020-03-11  9:08 ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200309101428.15267-12-m.felsch@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).