From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Jacopo Mondi" <jacopo@jmondi.org>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
sakari.ailus@iki.fi, "Hans Verkuil" <hverkuil@xs4all.nl>,
"Hyun Kwon" <hyunk@xilinx.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
"Jacopo Mondi" <jacopo+renesas@jmondi.org>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Rob Herring" <robh@kernel.org>
Subject: [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286
Date: Tue, 12 May 2020 16:51:02 +0100 [thread overview]
Message-ID: <20200512155105.1068064-2-kieran.bingham+renesas@ideasonboard.com> (raw)
In-Reply-To: <20200512155105.1068064-1-kieran.bingham+renesas@ideasonboard.com>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The MAX9286 deserializes video data received on up to 4 Gigabit
Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up
to 4 data lanes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v7:
- Collect Rob's RB tag
- Remove redundant maxItems from remote-endpoints
- Fix SPDX licence tag
.../bindings/media/i2c/maxim,max9286.yaml | 287 ++++++++++++++++++
1 file changed, 287 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
new file mode 100644
index 000000000000..f9d3e5712c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated Quad GMSL Deserializer
+
+maintainers:
+ - Jacopo Mondi <jacopo+renesas@jmondi.org>
+ - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+ The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
+ Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
+ lanes.
+
+ In addition to video data, the GMSL links carry a bidirectional control
+ channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
+ not addressed to itself to the other side of the links, where a GMSL
+ serializer will output it on a local I2C bus. In the other direction all I2C
+ traffic received over GMSL by the MAX9286 is output on the local I2C bus.
+
+properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ compatible:
+ const: maxim,max9286
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ poc-supply:
+ description: Regulator providing Power over Coax to the cameras
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIO connected to the \#PWDN pin with inverted polarity
+ maxItems: 1
+
+ ports:
+ type: object
+ description: |
+ The connections to the MAX9286 GMSL and its endpoint nodes are modelled
+ using the OF graph bindings in accordance with the video interface
+ bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ The following table lists the port number corresponding to each device
+ port.
+
+ Port Description
+ ----------------------------------------
+ Port 0 GMSL Input 0
+ Port 1 GMSL Input 1
+ Port 2 GMSL Input 2
+ Port 3 GMSL Input 3
+ Port 4 CSI-2 Output
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@[0-3]:
+ type: object
+ properties:
+ reg:
+ enum: [ 0, 1, 2, 3 ]
+
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint:
+ description: |
+ phandle to the remote GMSL source endpoint subnode in the
+ remote node port.
+
+ required:
+ - remote-endpoint
+
+ required:
+ - reg
+ - endpoint
+
+ additionalProperties: false
+
+ port@4:
+ type: object
+ properties:
+ reg:
+ const: 4
+
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint:
+ description: phandle to the remote CSI-2 sink endpoint.
+
+ data-lanes:
+ description: array of physical CSI-2 data lane indexes.
+
+ required:
+ - remote-endpoint
+ - data-lanes
+
+ required:
+ - reg
+ - endpoint
+
+ additionalProperties: false
+
+ required:
+ - port@4
+
+ i2c-mux:
+ type: object
+ description: |
+ Each GMSL link is modelled as a child bus of an i2c bus
+ multiplexer/switch, in accordance with bindings described in
+ Documentation/devicetree/bindings/i2c/i2c-mux.txt. The serializer
+ device on the remote end of the GMSL link shall be modelled as a child
+ node of the corresponding I2C bus.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ports
+ - i2c-mux
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0xe66d8000 0 0x40>;
+
+ gmsl-deserializer@2c {
+ compatible = "maxim,max9286";
+ reg = <0x2c>;
+ poc-supply = <&camera_poc_12v>;
+ enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ max9286_in0: endpoint {
+ remote-endpoint = <&rdacm20_out0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ max9286_in1: endpoint {
+ remote-endpoint = <&rdacm20_out1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ max9286_in2: endpoint {
+ remote-endpoint = <&rdacm20_out2>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ max9286_in3: endpoint {
+ remote-endpoint = <&rdacm20_out3>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ max9286_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ camera@51 {
+ reg = <0x51>;
+
+ port {
+ rdacm20_out0: endpoint {
+ remote-endpoint = <&max9286_in0>;
+ };
+ };
+
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ camera@52 {
+ reg = <0x52>;
+
+ port {
+ rdacm20_out1: endpoint {
+ remote-endpoint = <&max9286_in1>;
+ };
+ };
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ camera@53 {
+ reg = <0x53>;
+
+ port {
+ rdacm20_out2: endpoint {
+ remote-endpoint = <&max9286_in2>;
+ };
+ };
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ camera@54 {
+ reg = <0x54>;
+
+ port {
+ rdacm20_out3: endpoint {
+ remote-endpoint = <&max9286_in3>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
--
2.25.1
next prev parent reply other threads:[~2020-05-12 15:51 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-12 15:51 [PATCH v9 0/4] MAX9286 GMSL Support (+RDACM20) Kieran Bingham
2020-05-12 15:51 ` Kieran Bingham [this message]
2020-05-12 22:33 ` [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286 Rob Herring
2020-05-13 12:54 ` Jacopo Mondi
2020-05-14 9:43 ` [PATCH] fixup! dt-bindings: media: i2c: Add bindings for Maxima Integrated MAX9286 Kieran Bingham
2020-05-14 10:20 ` Jacopo Mondi
2020-05-12 22:36 ` [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim " Rob Herring
2020-05-13 12:28 ` Jacopo Mondi
2020-05-12 15:51 ` [PATCH v9 2/4] media: i2c: Add MAX9286 driver Kieran Bingham
2020-05-12 17:40 ` Manivannan Sadhasivam
2020-05-14 9:53 ` Kieran Bingham
2020-05-14 9:59 ` Manivannan Sadhasivam
2020-05-14 10:05 ` Kieran Bingham
2020-05-12 18:17 ` Manivannan Sadhasivam
2020-05-14 10:02 ` Kieran Bingham
2020-05-14 10:13 ` Manivannan Sadhasivam
2020-05-14 11:47 ` Kieran Bingham
2020-05-14 11:59 ` Geert Uytterhoeven
2020-05-14 12:48 ` Manivannan Sadhasivam
2020-05-14 13:50 ` Kieran Bingham
2020-05-14 11:47 ` Kieran Bingham
2020-05-14 12:27 ` Kieran Bingham
2020-05-14 12:54 ` Manivannan Sadhasivam
2020-05-16 21:51 ` Sakari Ailus
2020-05-18 11:45 ` Kieran Bingham
2020-05-18 12:38 ` Jacopo Mondi
2020-05-18 13:09 ` Kieran Bingham
2020-05-18 16:11 ` [PATCH] fixes! [max9286]: Validate link formats Kieran Bingham
2020-05-18 18:44 ` Kieran Bingham
2020-05-19 8:13 ` Sakari Ailus
2020-05-19 7:56 ` Jacopo Mondi
2020-05-19 9:00 ` Kieran Bingham
2020-05-19 8:10 ` [PATCH v9 2/4] media: i2c: Add MAX9286 driver Sakari Ailus
2020-05-19 8:55 ` Kieran Bingham
2020-05-19 9:03 ` Sakari Ailus
2020-05-20 0:50 ` Laurent Pinchart
2020-05-26 8:54 ` Sakari Ailus
2020-05-12 15:51 ` [PATCH v9 3/4] dt-bindings: media: i2c: Add bindings for IMI RDACM2x Kieran Bingham
2020-05-12 15:51 ` [PATCH v9 4/4] media: i2c: Add RDACM20 driver Kieran Bingham
2020-05-16 22:36 ` Sakari Ailus
2020-05-18 7:35 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512155105.1068064-2-kieran.bingham+renesas@ideasonboard.com \
--to=kieran.bingham+renesas@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=hyunk@xilinx.com \
--cc=jacopo+renesas@jmondi.org \
--cc=jacopo@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).