linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Chase <jnchase@google.com>
To: linux-media@vger.kernel.org
Cc: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, robh+dt@kernel.org,
	devicetree@vger.kernel.org, Jeff Chase <jnchase@google.com>
Subject: [PATCH v2 1/2] dt-bindings: Add ch7322 media i2c device
Date: Thu, 14 May 2020 22:51:58 -0400	[thread overview]
Message-ID: <20200515025159.101081-2-jnchase@google.com> (raw)
In-Reply-To: <20200515025159.101081-1-jnchase@google.com>

The ch7322 is a Chrontel CEC controller.

Signed-off-by: Jeff Chase <jnchase@google.com>
---
 .../bindings/media/i2c/chrontel,ch7322.yaml   | 65 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 MAINTAINERS                                   |  7 ++
 3 files changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 000000000000..d78e355e411a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/i2c/ch7322.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+  - Jeff Chase <jnchase@google.com>
+
+description: |-
+  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+  programmable through I2C and drives a single CEC line.
+
+properties:
+  compatible:
+    const: chrontel,ch7322
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the RESET pin, if any. This
+      pin is active-low.
+
+  standby-gpios:
+    description: |-
+      Reference to the GPIO connected to the OE pin, if any. When low
+      the device will respond to power status requests with "standby"
+      if in auto mode.
+
+  # see ../cec.txt
+  hdmi-phandle:
+    description: phandle to the HDMI controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ch7322@75 {
+        compatible = "chrontel,ch7322";
+        reg = <0x75>;
+        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+        hdmi-phandle = <&hdmi>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d3891386d671..7794ffccd325 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -187,6 +187,8 @@ patternProperties:
     description: ChipOne
   "^chipspark,.*":
     description: ChipSPARK
+  "^chrontel,.*":
+    description: Chrontel, Inc.
   "^chrp,.*":
     description: Common Hardware Reference Platform
   "^chunghwa,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index d633a131dcd7..34c6d30e61e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4047,6 +4047,13 @@ F:	drivers/power/supply/cros_usbpd-charger.c
 N:	cros_ec
 N:	cros-ec
 
+CHRONTEL CH7322 CEC DRIVER
+M:	Jeff Chase <jnchase@google.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml
+
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:	James Schulman <james.schulman@cirrus.com>
 M:	David Rhodes <david.rhodes@cirrus.com>
-- 
2.26.2.761.g0e0b3e54be-goog


  reply	other threads:[~2020-05-15  2:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  2:51 [PATCH v2 0/2] CH7322 CEC controller driver Jeff Chase
2020-05-15  2:51 ` Jeff Chase [this message]
2020-05-18 14:15   ` [PATCH v2 1/2] dt-bindings: Add ch7322 media i2c device Rob Herring
2020-05-15  2:51 ` [PATCH v2 2/2] media: cec: i2c: ch7322: Add ch7322 CEC controller driver Jeff Chase
2020-05-18  9:34   ` Hans Verkuil
2020-05-28 22:55     ` Jeff Chase

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515025159.101081-2-jnchase@google.com \
    --to=jnchase@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).