Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
* [RESEND PATCH] media: marvell-ccic: Add support for runtime PM
@ 2020-05-20 18:00 Lubomir Rintel
  0 siblings, 0 replies; only message in thread
From: Lubomir Rintel @ 2020-05-20 18:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: linux-media, Jonathan Corbet, linux-kernel, Lubomir Rintel

On MMP3, the camera block lives on na separate power island. We want to
turn it off if the CCIC is not in use to conserve power.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/media/platform/marvell-ccic/mcam-core.c  |  3 +++
 drivers/media/platform/marvell-ccic/mmp-driver.c | 12 ++++++++----
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 09775b6624c6..c2cd1d461bd0 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -24,6 +24,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/videodev2.h>
+#include <linux/pm_runtime.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
@@ -901,6 +902,7 @@ static void mcam_clk_enable(struct mcam_camera *mcam)
 {
 	unsigned int i;
 
+	pm_runtime_get_sync(mcam->dev);
 	for (i = 0; i < NR_MCAM_CLK; i++) {
 		if (!IS_ERR(mcam->clk[i]))
 			clk_prepare_enable(mcam->clk[i]);
@@ -915,6 +917,7 @@ static void mcam_clk_disable(struct mcam_camera *mcam)
 		if (!IS_ERR(mcam->clk[i]))
 			clk_disable_unprepare(mcam->clk[i]);
 	}
+	pm_runtime_put(mcam->dev);
 }
 
 /* ---------------------------------------------------------------------- */
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 92b92255dac6..eec482d16805 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -24,6 +24,7 @@
 #include <linux/list.h>
 #include <linux/pm.h>
 #include <linux/clk.h>
+#include <linux/pm_runtime.h>
 
 #include "mcam-core.h"
 
@@ -313,10 +314,12 @@ static int mmpcam_probe(struct platform_device *pdev)
 	cam->irq = res->start;
 	ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
 					"mmp-camera", mcam);
-	if (ret == 0) {
-		mmpcam_add_device(cam);
-		return 0;
-	}
+	if (ret)
+		goto out;
+
+	mmpcam_add_device(cam);
+	pm_runtime_enable(&pdev->dev);
+	return 0;
 
 out:
 	fwnode_handle_put(mcam->asd.match.fwnode);
@@ -332,6 +335,7 @@ static int mmpcam_remove(struct mmp_camera *cam)
 
 	mmpcam_remove_device(cam);
 	mccic_shutdown(mcam);
+	pm_runtime_force_suspend(mcam->dev);
 	return 0;
 }
 
-- 
2.26.2


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-20 18:00 [RESEND PATCH] media: marvell-ccic: Add support for runtime PM Lubomir Rintel

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git