Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil@xs4all.nl, laurent.pinchart@ideasonboard.com,
	roman.kovalivskyi@globallogic.com,
	dave.stevenson@raspberrypi.org, naush@raspberrypi.com
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	mrodin@de.adit-jv.com, hugues.fruchet@st.com, mripard@kernel.org,
	aford173@gmail.com, sudipi@jp.adit-jv.com,
	andrew_gabbasov@mentor.com, erosca@de.adit-jv.com,
	linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org
Subject: [PATCH 10/25] media: ov5647: Program mode at s_stream(1) time
Date: Tue, 23 Jun 2020 12:08:00 +0200
Message-ID: <20200623100815.10674-11-jacopo@jmondi.org> (raw)
In-Reply-To: <20200623100815.10674-1-jacopo@jmondi.org>

Rename __sensor_init() function to ov5647_set_mode() as the function
is a regular one and the double underscores prefix shall be removed, and
then move it to program the mode at s_stream(1) time, not at sensor power
up.

Break out from __sensor_init() the stream_off() operation call at sensor
power up to coax the lanes in LP-11 state.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5647.c | 81 +++++++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 37 deletions(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 0c88f682de9b9..bb9ff77f49fe0 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -264,12 +264,54 @@ static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel)
 	return ov5647_write(sd, OV5647_REG_MIPI_CTRL14, channel_id | (channel << 6));
 }
 
+static int ov5647_set_mode(struct v4l2_subdev *sd)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 resetval, rdval;
+	int ret;
+
+	ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval);
+	if (ret < 0)
+		return ret;
+
+	ret = ov5647_write_array(sd, ov5647_640x480,
+				 ARRAY_SIZE(ov5647_640x480));
+	if (ret < 0) {
+		dev_err(&client->dev, "write sensor default regs error\n");
+		return ret;
+	}
+
+	ret = ov5647_set_virtual_channel(sd, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval);
+	if (ret < 0)
+		return ret;
+
+	if (!(resetval & 0x01)) {
+		dev_err(&client->dev, "Device was in SW standby");
+		ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int ov5647_stream_on(struct v4l2_subdev *sd)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov5647 *ov5647 = to_state(sd);
 	u8 val = MIPI_CTRL00_BUS_IDLE;
 	int ret;
 
+	ret = ov5647_set_mode(sd);
+	if (ret) {
+		dev_err(&client->dev, "Failed to program sensor mode: %d\n", ret);
+		return ret;
+	}
+
 	if (ov5647->clock_ncont)
 		val |= MIPI_CTRL00_CLOCK_LANE_GATE |
 		       MIPI_CTRL00_LINE_SYNC_ENABLE;
@@ -318,42 +360,6 @@ static int set_sw_standby(struct v4l2_subdev *sd, bool standby)
 	return ov5647_write(sd, OV5647_SW_STANDBY, rdval);
 }
 
-static int __sensor_init(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 resetval, rdval;
-	int ret;
-
-	ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval);
-	if (ret < 0)
-		return ret;
-
-	ret = ov5647_write_array(sd, ov5647_640x480,
-				 ARRAY_SIZE(ov5647_640x480));
-	if (ret < 0) {
-		dev_err(&client->dev, "write sensor default regs error\n");
-		return ret;
-	}
-
-	ret = ov5647_set_virtual_channel(sd, 0);
-	if (ret < 0)
-		return ret;
-
-	ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval);
-	if (ret < 0)
-		return ret;
-
-	if (!(resetval & 0x01)) {
-		dev_err(&client->dev, "Device was in SW standby");
-		ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* Stream off to make the clock lane into LP-11 state. */
-	return ov5647_stream_off(sd);
-}
-
 static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -385,7 +391,8 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
 			goto out;
 		}
 
-		ret = __sensor_init(sd);
+		/* Stream off to coax lanes into LP-11 state. */
+		ret = ov5647_stream_off(sd);
 		if (ret < 0) {
 			clk_disable_unprepare(ov5647->xclk);
 			dev_err(&client->dev,
-- 
2.27.0


  parent reply index

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 10:07 [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Jacopo Mondi
2020-06-23 10:07 ` [PATCH 01/25] dt-bindings: media: ov5647: Document pwdn-gpios Jacopo Mondi
2020-06-23 10:07 ` [PATCH 02/25] dt-bindings: media: ov5647: Document clock-noncontinuous Jacopo Mondi
2020-06-23 10:07 ` [PATCH 03/25] media: ov5647: Add support for PWDN GPIO Jacopo Mondi
2020-07-09 20:04   ` [libcamera-devel] " Dafna Hirschfeld
2020-07-14 12:45     ` Jacopo Mondi
2020-06-23 10:07 ` [PATCH 04/25] media: ov5647: Add support for non-continuous clock mode Jacopo Mondi
2020-06-23 10:07 ` [PATCH 05/25] media: ov5647: Add set_fmt and get_fmt calls Jacopo Mondi
2020-06-23 10:07 ` [PATCH 06/25] media: ov5647: Fix format initialization Jacopo Mondi
2020-06-23 10:07 ` [PATCH 07/25] media: ov5647: Fix style issues Jacopo Mondi
2020-06-23 10:07 ` [PATCH 08/25] media: ov5647: Replace license with SPDX identifier Jacopo Mondi
2020-06-23 10:07 ` [PATCH 09/25] media: ov5647: Fix return value from read/write Jacopo Mondi
2020-06-23 10:08 ` Jacopo Mondi [this message]
2020-06-23 16:42 ` [PATCH 11/25] media: ov5647: Implement enum_frame_size() Jacopo Mondi
2020-08-18  7:33   ` Sakari Ailus
2020-08-18  7:38     ` Sakari Ailus
2020-06-23 16:42 ` [PATCH 12/25] media: ov5647: Protect s_stream() with mutex Jacopo Mondi
2020-06-23 16:42 ` [PATCH 13/25] media: ov5647: Support gain, exposure and AWB controls Jacopo Mondi
2020-06-23 16:42 ` [PATCH 14/25] media: ov5647: Rationalize driver structure name Jacopo Mondi
2020-06-23 16:42 ` [PATCH 15/25] media: ov5647: Break out format handling Jacopo Mondi
2020-07-31 11:44   ` Sakari Ailus
2020-06-23 16:49 ` [PATCH 16/25] media: ov5647: Add support for get_selection() Jacopo Mondi
2020-07-09 19:56   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-23 16:49 ` [PATCH 17/25] media: ov5647: Rename SBGGR8 VGA mode Jacopo Mondi
2020-06-23 16:49 ` [PATCH 18/25] media: ov5647: Add SGGBR10_1X10 modes Jacopo Mondi
2020-06-23 16:49 ` [PATCH 19/25] media: ov5647: Implement set_fmt pad operation Jacopo Mondi
2020-06-29 16:54   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-30 10:13     ` Jacopo Mondi
2020-06-30 11:09       ` Dafna Hirschfeld
2020-06-23 16:55 ` [PATCH 20/25] media: ov5647: Program mode only if it has changed Jacopo Mondi
2020-06-29 17:48   ` Dafna Hirschfeld
2020-06-30  7:43     ` Jacopo Mondi
2020-06-30  9:32       ` Dafna Hirschfeld
2020-06-30 10:06         ` Jacopo Mondi
2020-06-30 10:56           ` Dafna Hirschfeld
2020-06-30 12:05             ` Jacopo Mondi
2020-06-30 13:01               ` Dafna Hirschfeld
2020-06-30 14:53                 ` [libcamera-devel] " Dave Stevenson
2020-06-30 15:11                   ` Dafna Hirschfeld
2020-07-01  7:25                 ` Laurent Pinchart
2020-07-03 12:21                   ` Jacopo Mondi
2020-07-03 16:33                     ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 21/25] media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag Jacopo Mondi
2020-06-23 16:55 ` [PATCH 22/25] media: ov5647: Support V4L2_CID_PIXEL_RATE Jacopo Mondi
2020-06-29 17:01   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-29 21:25     ` Dave Stevenson
2020-06-30 15:13       ` Dave Stevenson
2020-07-01  7:21         ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 23/25] media: ov5647: Support V4L2_CID_HBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 24/25] media: ov5647: Support V4L2_CID_VBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 25/25] media: ov5647: Advertise the correct exposure range Jacopo Mondi
2020-06-29 17:33 ` [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Dafna Hirschfeld
2020-06-29 18:08   ` Dafna Hirschfeld
2020-07-10 15:59 ` Dafna Hirschfeld
2020-07-14 12:48   ` Jacopo Mondi
  -- strict thread matches above, loose matches on Subject: below --
2020-06-22 17:18 Jacopo Mondi
2020-06-22 17:18 ` [PATCH 10/25] media: ov5647: Program mode at s_stream(1) time Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623100815.10674-11-jacopo@jmondi.org \
    --to=jacopo@jmondi.org \
    --cc=aford173@gmail.com \
    --cc=andrew_gabbasov@mentor.com \
    --cc=dave.stevenson@raspberrypi.org \
    --cc=erosca@de.adit-jv.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=libcamera-devel@lists.libcamera.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=mrodin@de.adit-jv.com \
    --cc=naush@raspberrypi.com \
    --cc=roman.kovalivskyi@globallogic.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sudipi@jp.adit-jv.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git