Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil@xs4all.nl, laurent.pinchart@ideasonboard.com,
	roman.kovalivskyi@globallogic.com,
	dave.stevenson@raspberrypi.org, naush@raspberrypi.com
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	mrodin@de.adit-jv.com, hugues.fruchet@st.com, mripard@kernel.org,
	aford173@gmail.com, sudipi@jp.adit-jv.com,
	andrew_gabbasov@mentor.com, erosca@de.adit-jv.com,
	linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org
Subject: [PATCH 03/25] media: ov5647: Add support for PWDN GPIO.
Date: Tue, 23 Jun 2020 12:07:53 +0200
Message-ID: <20200623100815.10674-4-jacopo@jmondi.org> (raw)
In-Reply-To: <20200623100815.10674-1-jacopo@jmondi.org>

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Add support for an optional GPIO connected to PWDN on the sensor. This
allows the use of hardware standby mode where internal device clock
and circuit activities are halted.

Please note that power is off when PWDN is high.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5647.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index e7d2e5b4ad4b9..105ff7f899b34 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -21,6 +21,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -35,6 +36,13 @@
 
 #define SENSOR_NAME "ov5647"
 
+/*
+ * From the datasheet, "20ms after PWDN goes low or 20ms after RESETB goes
+ * high if reset is inserted after PWDN goes high, host can access sensor's
+ * SCCB to initialize sensor."
+ */
+#define PWDN_ACTIVE_DELAY_MS	20
+
 #define MIPI_CTRL00_CLOCK_LANE_GATE		BIT(5)
 #define MIPI_CTRL00_BUS_IDLE			BIT(2)
 #define MIPI_CTRL00_CLOCK_LANE_DISABLE		BIT(0)
@@ -86,6 +94,7 @@ struct ov5647 {
 	unsigned int			height;
 	int				power_count;
 	struct clk			*xclk;
+	struct gpio_desc		*pwdn;
 };
 
 static inline struct ov5647 *to_state(struct v4l2_subdev *sd)
@@ -355,6 +364,11 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
 	if (on && !ov5647->power_count)	{
 		dev_dbg(&client->dev, "OV5647 power on\n");
 
+		if (ov5647->pwdn) {
+			gpiod_set_value_cansleep(ov5647->pwdn, 0);
+			msleep(PWDN_ACTIVE_DELAY_MS);
+		}
+
 		ret = clk_prepare_enable(ov5647->xclk);
 		if (ret < 0) {
 			dev_err(&client->dev, "clk prepare enable failed\n");
@@ -392,6 +406,8 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
 			dev_dbg(&client->dev, "soft stby failed\n");
 
 		clk_disable_unprepare(ov5647->xclk);
+
+		gpiod_set_value_cansleep(ov5647->pwdn, 1);
 	}
 
 	/* Update the power count. */
@@ -581,6 +597,10 @@ static int ov5647_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
+	/* Request the power down GPIO asserted */
+	sensor->pwdn = devm_gpiod_get_optional(&client->dev, "pwdn",
+					       GPIOD_OUT_HIGH);
+
 	mutex_init(&sensor->lock);
 
 	sd = &sensor->sd;
@@ -594,7 +614,15 @@ static int ov5647_probe(struct i2c_client *client)
 	if (ret < 0)
 		goto mutex_remove;
 
+	if (sensor->pwdn) {
+		gpiod_set_value_cansleep(sensor->pwdn, 0);
+		msleep(PWDN_ACTIVE_DELAY_MS);
+	}
+
 	ret = ov5647_detect(sd);
+
+	gpiod_set_value_cansleep(sensor->pwdn, 1);
+
 	if (ret < 0)
 		goto error;
 
-- 
2.27.0


  parent reply index

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 10:07 [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Jacopo Mondi
2020-06-23 10:07 ` [PATCH 01/25] dt-bindings: media: ov5647: Document pwdn-gpios Jacopo Mondi
2020-06-23 10:07 ` [PATCH 02/25] dt-bindings: media: ov5647: Document clock-noncontinuous Jacopo Mondi
2020-06-23 10:07 ` Jacopo Mondi [this message]
2020-07-09 20:04   ` [libcamera-devel] [PATCH 03/25] media: ov5647: Add support for PWDN GPIO Dafna Hirschfeld
2020-07-14 12:45     ` Jacopo Mondi
2020-06-23 10:07 ` [PATCH 04/25] media: ov5647: Add support for non-continuous clock mode Jacopo Mondi
2020-06-23 10:07 ` [PATCH 05/25] media: ov5647: Add set_fmt and get_fmt calls Jacopo Mondi
2020-06-23 10:07 ` [PATCH 06/25] media: ov5647: Fix format initialization Jacopo Mondi
2020-06-23 10:07 ` [PATCH 07/25] media: ov5647: Fix style issues Jacopo Mondi
2020-06-23 10:07 ` [PATCH 08/25] media: ov5647: Replace license with SPDX identifier Jacopo Mondi
2020-06-23 10:07 ` [PATCH 09/25] media: ov5647: Fix return value from read/write Jacopo Mondi
2020-06-23 10:08 ` [PATCH 10/25] media: ov5647: Program mode at s_stream(1) time Jacopo Mondi
2020-06-23 16:42 ` [PATCH 11/25] media: ov5647: Implement enum_frame_size() Jacopo Mondi
2020-08-18  7:33   ` Sakari Ailus
2020-08-18  7:38     ` Sakari Ailus
2020-06-23 16:42 ` [PATCH 12/25] media: ov5647: Protect s_stream() with mutex Jacopo Mondi
2020-06-23 16:42 ` [PATCH 13/25] media: ov5647: Support gain, exposure and AWB controls Jacopo Mondi
2020-06-23 16:42 ` [PATCH 14/25] media: ov5647: Rationalize driver structure name Jacopo Mondi
2020-06-23 16:42 ` [PATCH 15/25] media: ov5647: Break out format handling Jacopo Mondi
2020-07-31 11:44   ` Sakari Ailus
2020-06-23 16:49 ` [PATCH 16/25] media: ov5647: Add support for get_selection() Jacopo Mondi
2020-07-09 19:56   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-23 16:49 ` [PATCH 17/25] media: ov5647: Rename SBGGR8 VGA mode Jacopo Mondi
2020-06-23 16:49 ` [PATCH 18/25] media: ov5647: Add SGGBR10_1X10 modes Jacopo Mondi
2020-06-23 16:49 ` [PATCH 19/25] media: ov5647: Implement set_fmt pad operation Jacopo Mondi
2020-06-29 16:54   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-30 10:13     ` Jacopo Mondi
2020-06-30 11:09       ` Dafna Hirschfeld
2020-06-23 16:55 ` [PATCH 20/25] media: ov5647: Program mode only if it has changed Jacopo Mondi
2020-06-29 17:48   ` Dafna Hirschfeld
2020-06-30  7:43     ` Jacopo Mondi
2020-06-30  9:32       ` Dafna Hirschfeld
2020-06-30 10:06         ` Jacopo Mondi
2020-06-30 10:56           ` Dafna Hirschfeld
2020-06-30 12:05             ` Jacopo Mondi
2020-06-30 13:01               ` Dafna Hirschfeld
2020-06-30 14:53                 ` [libcamera-devel] " Dave Stevenson
2020-06-30 15:11                   ` Dafna Hirschfeld
2020-07-01  7:25                 ` Laurent Pinchart
2020-07-03 12:21                   ` Jacopo Mondi
2020-07-03 16:33                     ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 21/25] media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag Jacopo Mondi
2020-06-23 16:55 ` [PATCH 22/25] media: ov5647: Support V4L2_CID_PIXEL_RATE Jacopo Mondi
2020-06-29 17:01   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-29 21:25     ` Dave Stevenson
2020-06-30 15:13       ` Dave Stevenson
2020-07-01  7:21         ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 23/25] media: ov5647: Support V4L2_CID_HBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 24/25] media: ov5647: Support V4L2_CID_VBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 25/25] media: ov5647: Advertise the correct exposure range Jacopo Mondi
2020-06-29 17:33 ` [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Dafna Hirschfeld
2020-06-29 18:08   ` Dafna Hirschfeld
2020-07-10 15:59 ` Dafna Hirschfeld
2020-07-14 12:48   ` Jacopo Mondi
  -- strict thread matches above, loose matches on Subject: below --
2020-06-22 17:18 Jacopo Mondi
2020-06-22 17:18 ` [PATCH 03/25] media: ov5647: Add support for PWDN GPIO Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623100815.10674-4-jacopo@jmondi.org \
    --to=jacopo@jmondi.org \
    --cc=aford173@gmail.com \
    --cc=andrew_gabbasov@mentor.com \
    --cc=dave.stevenson@raspberrypi.org \
    --cc=erosca@de.adit-jv.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=libcamera-devel@lists.libcamera.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=mrodin@de.adit-jv.com \
    --cc=naush@raspberrypi.com \
    --cc=roman.kovalivskyi@globallogic.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sudipi@jp.adit-jv.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git