Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil@xs4all.nl, laurent.pinchart@ideasonboard.com,
	roman.kovalivskyi@globallogic.com,
	dave.stevenson@raspberrypi.org, naush@raspberrypi.com
Cc: Jacopo Mondi <jacopo@jmondi.org>,
	mrodin@de.adit-jv.com, hugues.fruchet@st.com, mripard@kernel.org,
	aford173@gmail.com, sudipi@jp.adit-jv.com,
	andrew_gabbasov@mentor.com, erosca@de.adit-jv.com,
	linux-media@vger.kernel.org, libcamera-devel@lists.libcamera.org
Subject: [PATCH 04/25] media: ov5647: Add support for non-continuous clock mode
Date: Tue, 23 Jun 2020 12:07:54 +0200
Message-ID: <20200623100815.10674-5-jacopo@jmondi.org> (raw)
In-Reply-To: <20200623100815.10674-1-jacopo@jmondi.org>

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Add support for optional non-continuous clock mode to the ov5647
sensor driver.

Non-continuous clock saves a small amount of power and on some SoCs
is easier to interface with.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5647.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 105ff7f899b34..2d69cd97142d7 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -44,6 +44,7 @@
 #define PWDN_ACTIVE_DELAY_MS	20
 
 #define MIPI_CTRL00_CLOCK_LANE_GATE		BIT(5)
+#define MIPI_CTRL00_LINE_SYNC_ENABLE		BIT(4)
 #define MIPI_CTRL00_BUS_IDLE			BIT(2)
 #define MIPI_CTRL00_CLOCK_LANE_DISABLE		BIT(0)
 
@@ -95,6 +96,7 @@ struct ov5647 {
 	int				power_count;
 	struct clk			*xclk;
 	struct gpio_desc		*pwdn;
+	bool				clock_ncont;
 };
 
 static inline struct ov5647 *to_state(struct v4l2_subdev *sd)
@@ -269,9 +271,15 @@ static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel)
 
 static int ov5647_stream_on(struct v4l2_subdev *sd)
 {
+	struct ov5647 *ov5647 = to_state(sd);
+	u8 val = MIPI_CTRL00_BUS_IDLE;
 	int ret;
 
-	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_BUS_IDLE);
+	if (ov5647->clock_ncont)
+		val |= MIPI_CTRL00_CLOCK_LANE_GATE |
+		       MIPI_CTRL00_LINE_SYNC_ENABLE;
+
+	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, val);
 	if (ret < 0)
 		return ret;
 
@@ -546,9 +554,11 @@ static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = {
 	.open = ov5647_open,
 };
 
-static int ov5647_parse_dt(struct device_node *np)
+static int ov5647_parse_dt(struct ov5647 *sensor, struct device_node *np)
 {
-	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
 	struct device_node *ep;
 
 	int ret;
@@ -558,7 +568,13 @@ static int ov5647_parse_dt(struct device_node *np)
 		return -EINVAL;
 
 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
+	if (ret)
+		goto out;
 
+	sensor->clock_ncont = bus_cfg.bus.mipi_csi2.flags &
+			      V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+
+out:
 	of_node_put(ep);
 	return ret;
 }
@@ -577,7 +593,7 @@ static int ov5647_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	if (IS_ENABLED(CONFIG_OF) && np) {
-		ret = ov5647_parse_dt(np);
+		ret = ov5647_parse_dt(sensor, np);
 		if (ret) {
 			dev_err(dev, "DT parsing error: %d\n", ret);
 			return ret;
-- 
2.27.0


  parent reply index

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 10:07 [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Jacopo Mondi
2020-06-23 10:07 ` [PATCH 01/25] dt-bindings: media: ov5647: Document pwdn-gpios Jacopo Mondi
2020-06-23 10:07 ` [PATCH 02/25] dt-bindings: media: ov5647: Document clock-noncontinuous Jacopo Mondi
2020-06-23 10:07 ` [PATCH 03/25] media: ov5647: Add support for PWDN GPIO Jacopo Mondi
2020-07-09 20:04   ` [libcamera-devel] " Dafna Hirschfeld
2020-07-14 12:45     ` Jacopo Mondi
2020-06-23 10:07 ` Jacopo Mondi [this message]
2020-06-23 10:07 ` [PATCH 05/25] media: ov5647: Add set_fmt and get_fmt calls Jacopo Mondi
2020-06-23 10:07 ` [PATCH 06/25] media: ov5647: Fix format initialization Jacopo Mondi
2020-06-23 10:07 ` [PATCH 07/25] media: ov5647: Fix style issues Jacopo Mondi
2020-06-23 10:07 ` [PATCH 08/25] media: ov5647: Replace license with SPDX identifier Jacopo Mondi
2020-06-23 10:07 ` [PATCH 09/25] media: ov5647: Fix return value from read/write Jacopo Mondi
2020-06-23 10:08 ` [PATCH 10/25] media: ov5647: Program mode at s_stream(1) time Jacopo Mondi
2020-06-23 16:42 ` [PATCH 11/25] media: ov5647: Implement enum_frame_size() Jacopo Mondi
2020-08-18  7:33   ` Sakari Ailus
2020-08-18  7:38     ` Sakari Ailus
2020-06-23 16:42 ` [PATCH 12/25] media: ov5647: Protect s_stream() with mutex Jacopo Mondi
2020-06-23 16:42 ` [PATCH 13/25] media: ov5647: Support gain, exposure and AWB controls Jacopo Mondi
2020-06-23 16:42 ` [PATCH 14/25] media: ov5647: Rationalize driver structure name Jacopo Mondi
2020-06-23 16:42 ` [PATCH 15/25] media: ov5647: Break out format handling Jacopo Mondi
2020-07-31 11:44   ` Sakari Ailus
2020-06-23 16:49 ` [PATCH 16/25] media: ov5647: Add support for get_selection() Jacopo Mondi
2020-07-09 19:56   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-23 16:49 ` [PATCH 17/25] media: ov5647: Rename SBGGR8 VGA mode Jacopo Mondi
2020-06-23 16:49 ` [PATCH 18/25] media: ov5647: Add SGGBR10_1X10 modes Jacopo Mondi
2020-06-23 16:49 ` [PATCH 19/25] media: ov5647: Implement set_fmt pad operation Jacopo Mondi
2020-06-29 16:54   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-30 10:13     ` Jacopo Mondi
2020-06-30 11:09       ` Dafna Hirschfeld
2020-06-23 16:55 ` [PATCH 20/25] media: ov5647: Program mode only if it has changed Jacopo Mondi
2020-06-29 17:48   ` Dafna Hirschfeld
2020-06-30  7:43     ` Jacopo Mondi
2020-06-30  9:32       ` Dafna Hirschfeld
2020-06-30 10:06         ` Jacopo Mondi
2020-06-30 10:56           ` Dafna Hirschfeld
2020-06-30 12:05             ` Jacopo Mondi
2020-06-30 13:01               ` Dafna Hirschfeld
2020-06-30 14:53                 ` [libcamera-devel] " Dave Stevenson
2020-06-30 15:11                   ` Dafna Hirschfeld
2020-07-01  7:25                 ` Laurent Pinchart
2020-07-03 12:21                   ` Jacopo Mondi
2020-07-03 16:33                     ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 21/25] media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag Jacopo Mondi
2020-06-23 16:55 ` [PATCH 22/25] media: ov5647: Support V4L2_CID_PIXEL_RATE Jacopo Mondi
2020-06-29 17:01   ` [libcamera-devel] " Dafna Hirschfeld
2020-06-29 21:25     ` Dave Stevenson
2020-06-30 15:13       ` Dave Stevenson
2020-07-01  7:21         ` Laurent Pinchart
2020-06-23 16:55 ` [PATCH 23/25] media: ov5647: Support V4L2_CID_HBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 24/25] media: ov5647: Support V4L2_CID_VBLANK control Jacopo Mondi
2020-06-23 16:55 ` [PATCH 25/25] media: ov5647: Advertise the correct exposure range Jacopo Mondi
2020-06-29 17:33 ` [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1 Dafna Hirschfeld
2020-06-29 18:08   ` Dafna Hirschfeld
2020-07-10 15:59 ` Dafna Hirschfeld
2020-07-14 12:48   ` Jacopo Mondi
  -- strict thread matches above, loose matches on Subject: below --
2020-06-22 17:18 Jacopo Mondi
2020-06-22 17:18 ` [PATCH 04/25] media: ov5647: Add support for non-continuous clock mode Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623100815.10674-5-jacopo@jmondi.org \
    --to=jacopo@jmondi.org \
    --cc=aford173@gmail.com \
    --cc=andrew_gabbasov@mentor.com \
    --cc=dave.stevenson@raspberrypi.org \
    --cc=erosca@de.adit-jv.com \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=libcamera-devel@lists.libcamera.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=mrodin@de.adit-jv.com \
    --cc=naush@raspberrypi.com \
    --cc=roman.kovalivskyi@globallogic.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sudipi@jp.adit-jv.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git