[PATCH v6 8/9] media: i2c: adv748x: Implement get_mbus_config

[Jacopo Mondi <jacopo+renesas@jmondi.org>]

Implement the newly introduced get_mbus_config operation to report the
number of currently used data lanes on the MIPI CSI-2 interface.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-csi2.c | 31 ++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 2091cda50935..99bb63d05eef 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -214,9 +214,40 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
+					struct v4l2_mbus_config *config)
+{
+	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+
+	if (pad != ADV748X_CSI2_SOURCE)
+		return -EINVAL;
+
+	config->type = V4L2_MBUS_CSI2_DPHY;
+	switch (tx->active_lanes) {
+	case 1:
+		config->flags = V4L2_MBUS_CSI2_1_LANE;
+		break;
+
+	case 2:
+		config->flags = V4L2_MBUS_CSI2_2_LANE;
+		break;
+
+	case 3:
+		config->flags = V4L2_MBUS_CSI2_3_LANE;
+		break;
+
+	case 4:
+		config->flags = V4L2_MBUS_CSI2_4_LANE;
+		break;
+	}
+
+	return 0;
+}
+
 static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
 	.get_fmt = adv748x_csi2_get_format,
 	.set_fmt = adv748x_csi2_set_format,
+	.get_mbus_config = adv748x_csi2_get_mbus_config,
 };
 
 /* -----------------------------------------------------------------------------
-- 
2.27.0