From: Jacopo Mondi <jacopo@jmondi.org>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, mchehab@kernel.org,
sakari.ailus@linux.intel.com, hverkuil-cisco@xs4all.nl,
laurent.pinchart@ideasonboard.com,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema
Date: Mon, 17 Aug 2020 17:12:53 +0200 [thread overview]
Message-ID: <20200817151253.drfgqojchbbfud5b@uno.localdomain> (raw)
In-Reply-To: <20200715140951.90753-1-jacopo+renesas@jmondi.org>
Hello
Mauro, Hans or Sakari (whoever maintains the media patchwork
instance), could you mark patches in this series as super-seded,
as I will re-send them out for each individual sensor ?
Thanks
j
On Wed, Jul 15, 2020 at 04:09:43PM +0200, Jacopo Mondi wrote:
> Convert to json schema the bindings file for the following sensor
> drivers:
>
> - ov5640
> - ov5645
> - ov772x
> - mt9v111
> - imx214
> - imx274
> - imx290
>
> On top of the conversion to yaml, rename the files to include the
> vendor prefix (I kept this separate as I'm not sure it's actually desired).
>
> The series requires:
> [PATCH v3 0/3] dt-bidings: media: ov5647 bindings + small fix
> which converts the ov5647 bindings to yaml which I sent separately
> as it was already in review.
>
> Individual maintainers Cc-ed for each single patch where available.
>
> Thanks
> j
>
> Jacopo Mondi (8):
> dt-bindings: media: ov5640: Convert to json-schema
> dt-bindings: media: ov5645: Convert to json-schema
> dt-bindings: media: mt9v111: Convert to json-schema
> dt-bindings: media: imx290: Convert to json-schema
> dt-bindings: media: imx274: Convert to json-schema
> dt-bindings: media: imx214: Convert to json-schema
> dt-bindings: media: ov772x: Convert to json-schema
> dt-bindings: media: i2c: Add prefix to yaml bindings
>
> .../bindings/media/i2c/aptina,mt9v111.txt | 46 -----
> .../bindings/media/i2c/aptina,mt9v111.yaml | 87 +++++++++
> .../devicetree/bindings/media/i2c/imx274.txt | 33 ----
> .../devicetree/bindings/media/i2c/imx290.txt | 57 ------
> .../devicetree/bindings/media/i2c/ov5640.txt | 92 ---------
> .../devicetree/bindings/media/i2c/ov5645.txt | 54 ------
> .../devicetree/bindings/media/i2c/ov772x.txt | 40 ----
> .../bindings/media/i2c/ovti,ov5640.yaml | 181 ++++++++++++++++++
> .../bindings/media/i2c/ovti,ov5645.yaml | 123 ++++++++++++
> .../i2c/{ov5647.yaml => ovti,ov5647.yaml} | 0
> .../bindings/media/i2c/ovti,ov772x.yaml | 89 +++++++++
> .../i2c/{ov8856.yaml => ovti,ov8856.yaml} | 0
> .../bindings/media/i2c/sony,imx214.txt | 53 -----
> .../bindings/media/i2c/sony,imx214.yaml | 124 ++++++++++++
> .../i2c/{imx219.yaml => sony,imx219.yaml} | 0
> .../bindings/media/i2c/sony,imx274.yaml | 74 +++++++
> .../bindings/media/i2c/sony,imx290.yaml | 124 ++++++++++++
> MAINTAINERS | 25 ++-
> 18 files changed, 819 insertions(+), 383 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
> create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx290.txt
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
> rename Documentation/devicetree/bindings/media/i2c/{ov5647.yaml => ovti,ov5647.yaml} (100%)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> rename Documentation/devicetree/bindings/media/i2c/{ov8856.yaml => ovti,ov8856.yaml} (100%)
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> rename Documentation/devicetree/bindings/media/i2c/{imx219.yaml => sony,imx219.yaml} (100%)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
>
> --
> 2.27.0
>
prev parent reply other threads:[~2020-08-17 15:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 14:09 [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
2020-07-15 14:09 ` [PATCH 1/8] dt-bindings: media: ov5640: " Jacopo Mondi
2020-07-15 17:04 ` Steve Longerbeam
2020-07-16 7:06 ` Jacopo Mondi
2020-07-16 1:53 ` Laurent Pinchart
2020-07-16 7:04 ` Jacopo Mondi
2020-07-16 13:08 ` Laurent Pinchart
2020-07-16 7:52 ` Geert Uytterhoeven
2020-07-16 14:51 ` Rob Herring
2020-07-15 14:09 ` [PATCH 2/8] dt-bindings: media: ov5645: " Jacopo Mondi
2020-07-15 15:31 ` Manivannan Sadhasivam
2020-07-15 14:09 ` [PATCH 3/8] dt-bindings: media: mt9v111: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 4/8] dt-bindings: media: imx290: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 5/8] dt-bindings: media: imx274: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 6/8] dt-bindings: media: imx214: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 7/8] dt-bindings: media: ov772x: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 8/8] dt-bindings: media: i2c: Add prefix to yaml bindings Jacopo Mondi
2020-08-17 15:12 ` Jacopo Mondi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200817151253.drfgqojchbbfud5b@uno.localdomain \
--to=jacopo@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).