From: Hyun Kwon <hyun.kwon@xilinx.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: "linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"sakari.ailus@iki.fi" <sakari.ailus@iki.fi>,
"hverkuil@xs4all.nl" <hverkuil@xs4all.nl>,
"manivannan.sadhasivam@linaro.org"
<manivannan.sadhasivam@linaro.org>
Subject: Re: [PATCH 4/4] media: i2c: max9286: Remove cached formats
Date: Mon, 17 Aug 2020 15:15:05 -0700 [thread overview]
Message-ID: <20200817221505.GA21736@xilinx.com> (raw)
In-Reply-To: <20200817143540.247340-5-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thanks for sharing!
On Mon, Aug 17, 2020 at 07:35:40AM -0700, Jacopo Mondi wrote:
> Now that the image stream formats are retrieved from the remote
> sources there's no need to cache them in the driver structure.
>
> Remove the cached mbus frame formats and their initialization.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/media/i2c/max9286.c | 17 -----------------
> 1 file changed, 17 deletions(-)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index a4e23396c4b6..97dfee767bbf 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -160,8 +160,6 @@ struct max9286_priv {
> struct v4l2_ctrl_handler ctrls;
> struct v4l2_ctrl *pixelrate;
>
> - struct v4l2_mbus_framefmt fmt[MAX9286_N_SINKS];
> -
> /* Protects controls and fmt structures */
> struct mutex mutex;
>
> @@ -758,18 +756,6 @@ static const struct v4l2_subdev_ops max9286_subdev_ops = {
> .pad = &max9286_pad_ops,
> };
>
> -static void max9286_init_format(struct v4l2_mbus_framefmt *fmt)
> -{
> - fmt->width = 1280;
> - fmt->height = 800;
> - fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
There's one more hardcoded place left. This had some implication on output
format, MAX9286_DATATYPE_YUV422_8BIT, which is programmed at 0x12.
Now, this patch set can potentially result in a mismatch between bus format
and acutal programmed format.
Thanks,
-hyun
> - fmt->colorspace = V4L2_COLORSPACE_SRGB;
> - fmt->field = V4L2_FIELD_NONE;
> - fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> - fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
> - fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> -}
> -
> static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
> {
> struct max9286_priv *priv = sd_to_max9286(subdev);
> @@ -834,9 +820,6 @@ static int max9286_v4l2_register(struct max9286_priv *priv)
>
> /* Configure V4L2 for the MAX9286 itself */
>
> - for (i = 0; i < MAX9286_N_SINKS; i++)
> - max9286_init_format(&priv->fmt[i]);
> -
> v4l2_i2c_subdev_init(&priv->sd, priv->client, &max9286_subdev_ops);
> priv->sd.internal_ops = &max9286_subdev_internal_ops;
> priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> --
> 2.27.0
>
next prev parent reply other threads:[~2020-08-17 22:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-17 14:35 [PATCH 0/4] media: i2c: max9286: Use remote endpoint image format Jacopo Mondi
2020-08-17 14:35 ` [PATCH 1/4] media: i2c: max9286: Initialize try formats Jacopo Mondi
2020-08-18 7:09 ` Sakari Ailus
2020-08-18 12:03 ` Jacopo Mondi
2020-08-17 14:35 ` [PATCH 2/4] media: i2c: max9286: Get format from remote ends Jacopo Mondi
2020-08-19 12:46 ` Laurent Pinchart
2020-08-24 7:48 ` Jacopo Mondi
2020-08-17 14:35 ` [PATCH 3/4] media: i2c: max9286: Do not allow changing format Jacopo Mondi
2020-08-17 14:35 ` [PATCH 4/4] media: i2c: max9286: Remove cached formats Jacopo Mondi
2020-08-17 22:15 ` Hyun Kwon [this message]
2020-08-18 12:05 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200817221505.GA21736@xilinx.com \
--to=hyun.kwon@xilinx.com \
--cc=hverkuil@xs4all.nl \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).