From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.9 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 87DE0C433DF for ; Mon, 24 Aug 2020 12:15:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 61BF92074D for ; Mon, 24 Aug 2020 12:15:20 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="RvmiG6Ha" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726745AbgHXMPT (ORCPT ); Mon, 24 Aug 2020 08:15:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41024 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725926AbgHXMPS (ORCPT ); Mon, 24 Aug 2020 08:15:18 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 79710C061573; Mon, 24 Aug 2020 05:15:18 -0700 (PDT) Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 88964279; Mon, 24 Aug 2020 14:15:16 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1598271316; bh=IKnxW/jDAvQVYbGiplzDEAniW6FM9WbIaWpnH9PrroU=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=RvmiG6HaeDqxPphLtltSeICQlBxcMs4BL66dvrCB6pwn/1Sv+NoHjstfV70t6CAYz tvrY3ga1MdTovYf7k+HGwLJtUvuAauQGiNsJ2YRGEfJgbr4CqcxdG8vsLz3+lSTQ+Y UG6hw01OUB5qYtTZlSB0ZAijlbDbnobjgPkasJ+0= Date: Mon, 24 Aug 2020 15:14:57 +0300 From: Laurent Pinchart To: Jacopo Mondi Cc: Jacopo Mondi , robh+dt@kernel.org, devicetree@vger.kernel.org, linux-media@vger.kernel.org, "Lad, Prabhakar" , mchehab@kernel.org, sakari.ailus@linux.intel.com, hverkuil-cisco@xs4all.nl, linux-renesas-soc@vger.kernel.org Subject: Re: [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema Message-ID: <20200824121457.GD6002@pendragon.ideasonboard.com> References: <20200818122012.37956-1-jacopo+renesas@jmondi.org> <20200818122012.37956-2-jacopo+renesas@jmondi.org> <20200819135204.GJ6049@pendragon.ideasonboard.com> <20200824083211.u2zm4o6f4wrxlu6k@uno.localdomain> <20200824113440.GC6002@pendragon.ideasonboard.com> <20200824121513.gvsr5sdodgpyv4w5@uno.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20200824121513.gvsr5sdodgpyv4w5@uno.localdomain> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Jacopo, On Mon, Aug 24, 2020 at 02:15:13PM +0200, Jacopo Mondi wrote: > On Mon, Aug 24, 2020 at 02:34:40PM +0300, Laurent Pinchart wrote: > > On Mon, Aug 24, 2020 at 10:32:11AM +0200, Jacopo Mondi wrote: > > > On Wed, Aug 19, 2020 at 04:52:04PM +0300, Laurent Pinchart wrote: > > > > On Tue, Aug 18, 2020 at 02:20:10PM +0200, Jacopo Mondi wrote: > > > > > Convert the ov772x binding document to json-schema and update > > > > > the MAINTAINERS file accordingly. > > > > > > > > > > Signed-off-by: Jacopo Mondi > > > > > --- > > > > > .../devicetree/bindings/media/i2c/ov772x.txt | 40 --------- > > > > > .../devicetree/bindings/media/i2c/ov772x.yaml | 84 +++++++++++++++++++ > > > > > > > > Could yuo rename this to ovti,ov772x.yaml ? > > > > > > > > > MAINTAINERS | 2 +- > > > > > 3 files changed, 85 insertions(+), 41 deletions(-) > > > > > delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt > > > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt > > > > > deleted file mode 100644 > > > > > index 0b3ede5b8e6a..000000000000 > > > > > --- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt > > > > > +++ /dev/null > > > > > @@ -1,40 +0,0 @@ > > > > > -* Omnivision OV7720/OV7725 CMOS sensor > > > > > - > > > > > -The Omnivision OV7720/OV7725 sensor supports multiple resolutions output, > > > > > -such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can > > > > > -support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats. > > > > > - > > > > > -Required Properties: > > > > > -- compatible: shall be one of > > > > > - "ovti,ov7720" > > > > > - "ovti,ov7725" > > > > > -- clocks: reference to the xclk input clock. > > > > > - > > > > > -Optional Properties: > > > > > -- reset-gpios: reference to the GPIO connected to the RSTB pin which is > > > > > - active low, if any. > > > > > -- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is > > > > > - active high, if any. > > > > > - > > > > > -The device node shall contain one 'port' child node with one child 'endpoint' > > > > > -subnode for its digital output video port, in accordance with the video > > > > > -interface bindings defined in Documentation/devicetree/bindings/media/ > > > > > -video-interfaces.txt. > > > > > - > > > > > -Example: > > > > > - > > > > > -&i2c0 { > > > > > - ov772x: camera@21 { > > > > > - compatible = "ovti,ov7725"; > > > > > - reg = <0x21>; > > > > > - reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>; > > > > > - powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>; > > > > > - clocks = <&xclk>; > > > > > - > > > > > - port { > > > > > - ov772x_0: endpoint { > > > > > - remote-endpoint = <&vcap1_in0>; > > > > > - }; > > > > > - }; > > > > > - }; > > > > > -}; > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml > > > > > new file mode 100644 > > > > > index 000000000000..2b84fefeb4aa > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml > > > > > @@ -0,0 +1,84 @@ > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: http://devicetree.org/schemas/media/i2c/ov772x.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Omnivision OV7720/OV7725 CMOS sensor > > > > > + > > > > > +maintainers: > > > > > + - Jacopo Mondi > > > > > + > > > > > +description: -| > > > > > + The Omnivision OV7720/OV7725 sensor supports multiple resolutions output, > > > > > + such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can > > > > > + support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats. > > > > > + > > > > > +properties: > > > > > + compatible: > > > > > + enum: > > > > > + - ovti,ov7720 > > > > > + - ovti,ov7725 > > > > > + > > > > > + reg: > > > > > + maxItems: 1 > > > > > + > > > > > + clocks: > > > > > + maxItems: 1 > > > > > + > > > > > + reset-gpios: > > > > > + description: -| > > > > > + Reference to the GPIO connected to the RSTB pin which is active low. > > > > > + maxItems: 1 > > > > > + > > > > > + powerdown-gpios: > > > > > + description: -| > > > > > + Reference to the GPIO connected to the PWDN pin which is active high. > > > > > + maxItems: 1 > > > > > + > > > > > + port: > > > > > + type: object > > > > > + description: | > > > > > + The device node must contain one 'port' child node for its digital output > > > > > + video port, in accordance with the video interface bindings defined in > > > > > + Documentation/devicetree/bindings/media/video-interfaces.txt. > > > > > > > > You can simply write > > > > > > > > Digital input video port. See ../video-interfaces.txt. > > > > > > > > > + > > > > > + properties: > > > > > + endpoint: > > > > > + type: object > > > > > + properties: > > > > > + remote-endpoint: > > > > > + description: A phandle to the bus receiver's endpoint node. > > > > > > > > required: > > > > - remote-endpoint > > > > > > > > additionalProperties: false > > > > > > I receveied a reply to you on previous json-schema conversion attempt > > > where you suggested to not set remote-endpoint as required, as we > > > allow empty ones to be later filled in in, maybe with an overlay. > > > > > > Which Laurent should I listen to ? I tend to agree with the one that > > > said to drop remote-endpoint from the required properties list. > > > > Maybe I recall incorrectly, didn't I say that endpoint shouldn't be > > mandatory ? Ports should be mandatory as they describe the hardware, > > endpoints describe a connection, and within a connection, I'm not sure > > to see a use-case for not setting remote-endpoint. Maybe I need to look > > better ? :-) > > > > I might be confused as well, but to me port and endpoint should be > there as they represent the available endpoints of the devices connections. > Connections to external devices that can be established (or overwritten) > by applying an overlay, and such are not mandatory. > > As I see it: > - port/endpoints: establish the available device connection endpoitns > and shall be mandatory (also to give a known place where to 'plug' > the connections) > > - remote-endpoints: data connections to external devices, which might > depend on the board assembly or installed 'capes' and expansions. As > such, they can be modeled as an overlay fragment to be applied on the > (known layout of the) device. Only the port represents a connection point. The endpoint node is part of the representation of the link, it doesn't map to a particular hardware resource on the port side. > > > > Reviewed-by: Laurent Pinchart > > > > > > > > > + > > > > > + additionalProperties: false > > > > > + > > > > > +required: > > > > > + - compatible > > > > > + - reg > > > > > + - clocks > > > > > + - reset-gpios > > > > > + - powerdown-gpios > > > > > + > > > > > +examples: > > > > > + - | > > > > > + #include > > > > > + > > > > > + i2c0 { > > > > > + #address-cells = <1>; > > > > > + #size-cells = <0>; > > > > > + ov772x: camera@21 { > > > > > + compatible = "ovti,ov7725"; > > > > > + reg = <0x21>; > > > > > + reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>; > > > > > + powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>; > > > > > + clocks = <&xclk>; > > > > > + > > > > > + port { > > > > > + ov772x_0: endpoint { > > > > > + remote-endpoint = <&vcap1_in0>; > > > > > + }; > > > > > + }; > > > > > + }; > > > > > + }; > > > > > + > > > > > +... > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > > > index d1a6173d3b64..d0a20214eaaf 100644 > > > > > --- a/MAINTAINERS > > > > > +++ b/MAINTAINERS > > > > > @@ -12666,7 +12666,7 @@ M: Jacopo Mondi > > > > > L: linux-media@vger.kernel.org > > > > > S: Odd fixes > > > > > T: git git://linuxtv.org/media_tree.git > > > > > -F: Documentation/devicetree/bindings/media/i2c/ov772x.txt > > > > > +F: Documentation/devicetree/bindings/media/i2c/ov772x.yaml > > > > > F: drivers/media/i2c/ov772x.c > > > > > F: include/media/i2c/ov772x.h > > > > > -- Regards, Laurent Pinchart